Search results

Title: Chujio (Semester Unknown) IPRO 303: ChujioIPRO302Poster1F10
Creator: Kumar, Aditi, Curtis, Christopher, Vysotskiy, Dmitriy, Ramirez, Ernesto, Abu-amara, Hashem, Chun, Jason, Jewell, John, Varga, Kalman, Michael, Mark, Koto, Melanie, Tagny, Patrick
Date: 2010, 2010-12
Description: Solutions through Coaliition
Sponsorship: NAVTEQ
Deliverables

Title: Test of a three ton refrigerating plant
Creator: Beerbaum, A. J, Strale, N. W, Keachie, P. L.
Date: 2009, 1912
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testofthreetonre00beer
Thesis (B.S.)--Armour Institute of Technology, 1912 B.S. in Mechanical Engineering, 1912

Title: Building Consumer Awareness and Preference for Safe Foods (Semester Unknown) IPRO 336: Building Consumer Awareness and Preference for Safe Foods IPRO 336 Ethics F08
Creator: Chauhan, Mark, Christensen, Carissa, Kari, Constantin, Kuebrich, Elizabeth, Kwon, Minjeong, Oke, Babajide, Rahnavard, Amir, Ray, Monmayuri, Stella, Meredith, Zhao, Yang
Date: 2008, 2008-12
Description: The IPRO 336 team is working with National Pasteurized Eggs, Inc. to create and test a new marketing strategy for the Davidson’s brand...
Show moreThe IPRO 336 team is working with National Pasteurized Eggs, Inc. to create and test a new marketing strategy for the Davidson’s brand pasteurized eggs. Pasteurized eggs are a reasonably new product in the egg industry and, as of yet, have not gained a large percentage of retail market sales. Pasteurized eggs are comparable in many aspects to their competitors but offer the added advantage of being virtually bacteria and salmonella free. Due to this fact, Davidson’s eggs have grown exponentially in the food service market, especially for hospitals and other locations catering to at-risk groups. The company is now seeking to expand in the retail market and is looking to revise their current marketing strategy to meet this goal, with the help of the IPRO team. After an initial review, the IPRO group split up into sub-groups that will focus on different aspects of the marketing plan, including Consumer Education/Psychology, Competitor Analysis, Display, Packaging/Labeling, Promotions, and Website Improvements. Through both secondary and primary research (in the form of consumer surveys), these groups will gain an understanding of the egg market, the average egg buyer, and how the marketing strategy can be most efficiently revised. Once the research has been completed, the sub-groups will be able to create a design or marketing technique in their area of improvement, test their ideas, and revise as necessary. The IPRO group is seeking a final product that will boost retail sales of Davidson’s pasteurized egg and increase consumer awareness of the large benefits of such a product.
Deliverables
Show less

Title: Marketing Plan for WIIT (Fall 2003) IPRO 322: Marketing Plan for WIIT IPRO322 Fall2003 Final Presentation
Creator: Hennigan, Tom, Dimitropoulou, Margarita, Gupta, Nishi, Tan, Kaebin, Brown, Michelle, Kirchev, Ivan, Ruseva, Snezhana, Vassiliou, Panayiota, Adu-ayamfi, Kwaku
Date: 2003, 2003-12
Description: To develop a marketing plan for WIIT 88.9FM which increases its popularity among the students, as well as provides the students with a better...
Show moreTo develop a marketing plan for WIIT 88.9FM which increases its popularity among the students, as well as provides the students with a better product.
Sponsorship: IIT Collaboratory for Interprofessional Studies
Project Plan for IPRO 322: Marketing Plan for WIIT for Fall 2003 semester
Show less

Title: Chicago Urban Art Center
Creator: Erick, Kristanto
Date: 2010-07-29

Title: Edutainment (semester?), IPRO 329: Edutainment IPRO 329 IPRO Day Presentation Sp07
Creator: Mcmanus, Keith, Hahn, Christopher, Aguirre, James, Smith, Anthony, Pasupneti, Shravani, Crowley, Joseph, Tan, Yun, Kloepping, Jason, Potocki, Brandon
Date: 2007-05, 2007-05
Description: IPRO 329, Edutainment, has the distinct goal of creating a simulated training program for nuclear health technicians. This program will...
Show moreIPRO 329, Edutainment, has the distinct goal of creating a simulated training program for nuclear health technicians. This program will provide an interactive environment in which to practice the skills necessary to pass the certification test. It focuses on the oral exam portion of this exam where the technician will be presented with a scenario designed to test his problem solving and reasoning skills while applying the general knowledge of radiation health standards required for his profession.
Deliverables for IPRO 329: Edutainment for the Spring 2007 semester
Show less

Title: Automatic Insulin Pumps Using Recursive Multivariable Models and Adaptive Control Algorithms
Creator: Cinar, Ali, Oruklu, Meriyan
Date: 2014-04-09, 2014-04-08
Description: A method and device for monitoring or treating patient glucose levels. The device includes a glucose sensor for measuring a glucose level of a...
Show moreA method and device for monitoring or treating patient glucose levels. The device includes a glucose sensor for measuring a glucose level of a patient, a physiological status monitoring system for measuring at least one physical or metabolic variable of the patient, and an automatic controller in communication with the glucose sensor and the physiological status monitoring system. The controller includes a prediction module for automatically predicting a future glucose level using data measured by the glucose sensor and the physiological sensor.
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: Edutainment (semester?), IPRO 329
Creator: Abdi, Shabihul, Branicki, Konrad, Ephraim, Matthew, Kimnach, Deborah, Llyod, Joseph, Loh, Almond, Merkley, Michael, Slone, Michael, Tan, Yun, Olson, Kurt, Pierce, James, Olsen, Keith
Date: 2006-12, 2006-12
Description: IPRO 329: Edutainment is an IPRO that invests its efforts into the education and entertainment of today’s youth. This mission gives us our...
Show moreIPRO 329: Edutainment is an IPRO that invests its efforts into the education and entertainment of today’s youth. This mission gives us our name with the combination of “Educate” and “Entertainment.” The realization of these goals has come in the form of computer games.
Deliverables for IPRO 329: Edutainment for the Fall 2006 semester
Show less

Title: Design of a Simulator for Mechanical Loading of Garage Door Operator Systems over a Wide Temperature Range (Fall 2003) IPRO 324: Design of a Simulator for Mechanical Loading of Garage Door Operating Systems IPRO324 Fall2003 Midterm Report
Creator: Shan Tang, Viola Wing, Sveum, Peter, Muliere, Peter, Majnert, Tom, Lukongwa, Tonny, Lee, Donghoon, Komano, Yoshikazu, Durodola, Jimoh, Cerney, Matt, Casas, Guillermo A.
Date: 2003, 2003-12
Description: The goal of this project is to develop algorithms to be used in a virtual simulation of a garage door’s operation and to construct a working...
Show moreThe goal of this project is to develop algorithms to be used in a virtual simulation of a garage door’s operation and to construct a working prototype that functions in the Thermotron environmental test chamber in The Chamberlain Group, Inc. facility in Elmhurst in order to collect data under a range of temperatures and humidity as well as a range of loading conditions. The simulator had to be made to fit as many of the operators under test as possible inside the limited size Thermotron that is not large enough to take the operator and a full garage door.
Sponsorship: The Chamberlain Group, Inc.
Project Plan for IPRO 324: Design of a Simulator for Mechanical Loading of Garage Door Operator Systems over a Wide Temperature Range for Fall 2003 semester
Show less

Title: A Greener IIT (Semester Unknown) IPRO 326: AGreenerIITIPRO326ProjectPlanSp10
Creator: Xiao, Ying, Masci, Julie, Duke, Kyle, O’keefe, Trevor, Azab, Naguib, Blosky, Mitch, Skinner, Jonathan, Stecyk, John, Manoharan, Tryphaena, Rodriguez, Edgar, Roeth, Ryan, Papuc, Irina
Date: 2010, 2010-05
Description: IIT’s core vision is built around the principle that no matter how good we get, we can always improve. As the University seeks to assert...
Show moreIIT’s core vision is built around the principle that no matter how good we get, we can always improve. As the University seeks to assert itself as a member of the top tier of academic institutions in the U.S., there are many ideas for improvement up for implementation. Among these ideas is the goal to make IIT the most sustainable, urban university campus in the United States. IPRO 326 (“A Greener IIT”) is based upon the idea that in order to accomplish this, we must improve the sustainability of IIT’s main campus landscape.
Deliverables
Show less

Title: Method of Making a Transducer Head
Creator: Camras, Marvin
Date: 2009-04-30, 1973-01-30
Description: A method of making a magnetic transducer head or element thereof from a binary alloy of silicon and iron, preferably containing from about 3...
Show moreA method of making a magnetic transducer head or element thereof from a binary alloy of silicon and iron, preferably containing from about 3 percent to 7 percent of silicon by weight, including provision of a grain-oriented silicon-iron core, annealing the core at a temperature above the Curie point in a dry hydrogen atmosphere and during cooling from that temperature subjecting the core piece to a magnetic field applied in the direction of the working flux at the core. The annealed core piece is formed so as to provide a gap-defining face for coupling to a magnetic record medium, the gap being of the order of about 1 micron.
Sponsorship: IIT Research Institute
United States Patent
Show less

Title: Design of a Hybrid electric People Transporter (semester?), IPRO 304: Hybrid Electric Fuel Cell Battery IPRO 304 Final Report F04
Creator: Langel, Steve, Smith, Alison, Weber, Ken, Lim, Dong Chul, Kraft, Rick, Lefief, Chrissy, Moy, Matt, Omolaoye, Olatunde, Ayersman, Matt, Aderangi, Vince, Prince, Mike, Bachmann, Matt, Eisenberg, David, Buresh, Rita, Piputkar, Siddha, Johnson, Steven, Taher, Tanim
Date: 2004-12, 2004-12
Description: The main objective and purpose of this IPRO is to create a hybrid system using a hydrogen PEM fuel cell and Lithium-Ion batteries to power a...
Show moreThe main objective and purpose of this IPRO is to create a hybrid system using a hydrogen PEM fuel cell and Lithium-Ion batteries to power a wheel chair so that it will be capable of transporting one person for at least 100 miles without experiencing any major difficulties.
Deliverables for IPRO 304: Design of a Hybrid electric People Transporter for the Fall 2004 semester
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Poster1 Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: 2B Developed EnPRO 351: 2B Developed EnPRO 351 Final Presentation Sp08
Creator: Vinson, Robert, Cunningham, Ryan, Mccall, Ian, Peake, Andrew, Alonso, Jesus, Kim, Min Seung, Hasija, Abhinav, Morales, Antonio, Kim, Jeong Shik
Date: 2008, 2008-05
Description: It is our objective to create a medium in which to combine the need of proficient web developers for university projects/ jobs as well as...
Show moreIt is our objective to create a medium in which to combine the need of proficient web developers for university projects/ jobs as well as others looking for similar services outside of the university, with IIT students looking to gain experience as well as payment, whether through class credits or through wages. We plan to create a business model of a consulting firm that seeks out clients, as well as having clients brought to the firm, realize their needs, create a design document of their proposed website, then seek out the students with the capabilities matching the clients needs and “hire” them for the job, all the while maintaining that the quality of the student’s work will be sufficient to the client and therefore sufficient for our consulting firm. The start up companies/clients we gain will receive knowledge, expertise, and fresh ideas for a much needed website for their company/project. On the other hand the students will receive real-life experience working for a client in a certain timetable, with a standardized set of guidelines while also receiving some form of compensation.
Deliverables
Show less

Title: Improving Global Supply Chain Management (Semester Unknown) IPRO 306: ImprovingGlobalSupplyChainManagementIPRO306BrochureSp10
Creator: Thukral, Anand, Wilas, Arthur, Lukic, Djordje, Smith, Suni, Chandnani, Abhishek, Devalam, Arun, Limpinyakul, Jutarop, Malpekar, Nilesh, Sun, Cong, Kotha, Anurag, Skiba, David, Sharangdhar, Kunal, Bergland, Tomas
Date: 2010, 2010-05
Description: The IPRO 306 team will be working with a sanitation and janitorial equipment manufacturer, Sloan Valve. The core competency of this company...
Show moreThe IPRO 306 team will be working with a sanitation and janitorial equipment manufacturer, Sloan Valve. The core competency of this company lies in manufacturing flush valves. Sloan Valve is currently one of the leading producers of flush valves in the Northern American Continent. The team will be assisting Sloan Valve in realizing two major projects.
Sponsorship: SLOAN
Deliverables
Show less

Title: Design Project for Production of IFN-alpha (semester?), IPRO 345: IFN-alpha Production IPRO 345 Abstract Sp06
Creator: Aluko, Nifemi, Ogunsanwo, Olumide, Ahmed, Syed, Singhal, Pankaj, Agrawal, Vaibhav, Hussain, Shan Iqbal, Haase, Mark, Bui, Phuong, Rivera, Robert, Amine, Rachid, Babjak, Alan, Chu, Vu, Eapen, Rahul, Gudivada, Medhavi, Diao, Abdoulaye, Tran, Minh, Schamber, Eric, Samee, Irfan, Khan, Syed, Hwang, Taeho, Marcus, Zander
Date: 2006-05, 2006-05
Description: The IPRO goal was to design a process for the production of the biotherapeutic compound IFN-Alpha from Chinese Hamster ovaries. After the...
Show moreThe IPRO goal was to design a process for the production of the biotherapeutic compound IFN-Alpha from Chinese Hamster ovaries. After the process design was complete, a process flow diagram showing the actual process and separation steps was created and finally an economic analysis of the market feasibility of the product was prepared. The approach to the IPRO involved dividing the objectives into three major groups: (1) the Che 496 group was involved in the process design and the separation processes; (2) the Che 296 group was involved in the public perception of biotechnology, the useful products from biotechnology and the survey of the commercial biotherapeutic compounds; and (3) the 435 group was involved with the history of biotherapeutics, classification and actions infernos and the companies involved in the production of therapeutics. The individual members of these groups are seen on the team list below.
Deliverables for IPRO 345: Design Project for Production of IFN-alpha for the Spring 2006 semester
Show less

Title: PB Our Space- A Parsons Brinckerhoff Project (Summer 2011) IPRO 320
Creator: Bell, Vince, Kavicky, Matthew, Khan, Taimoor, Kohli-lynch, Ciaran, Leevathana, Nick, Mcbride, Phillip, Nguyen, Hao, Vargas, Abigail, Wilkinson, David
Date: 2011, 2011-07
Description: Parsons Brinckerhoff (PB) is an engineering, construction, technical, and management services firm that provides diverse solutions to private...
Show moreParsons Brinckerhoff (PB) is an engineering, construction, technical, and management services firm that provides diverse solutions to private industrial customers worldwide, as well as to federal, regional, and local government agencies. Gathering requirements and feedback from the stakeholders for each project is imperative to meet the client’s needs. This process may be challenging due to the stakeholders’ diversity, location and time constraints. IPRO 320 was commissioned to design an application to interact with stakeholders for all PB projects. The stakeholders will be able to access information and take surveys, as well as post comments and other forms of multimedia to voice their opinions related to specific PB projects. During the summer 2011 semester, the IPRO developed concepts for an operational mobile application and web browser called PB OUR SPACE. To begin, this project required a vast amount of research and collaboration with Parsons Brinckerhoff. In order to make the most of a limited amount of time, the semester was divided into two parts. The first half of the semester was used to gather information about PB to build a better understanding of what would be required for the application. For the second half of the semester, we utilized that information to create a storyboard showing how the application will be used and developed. The functionality of the mobile application and browser is detailed in Appendix 3: Storyboard. The future IPRO team will be able to continue and expand this work by creating a working prototype of the storyboard concepts. All our work this semester has been compiled and filed to help make a smooth transition between semesters. This information contains the progress made thus far as well as recommendations for development of the application. By providing this information, the developed storyboard and proposed conclusions will make a solid framework for the development of the product, PB OUR SPACE (stakeholders’ perspectives about contextual elements).
Sponsorship: Parsons Brinckerhoff
Project Plan for IPRO 320: PB Our Space- A Parsons Brinckerhoff Project for the Summer 2011 semester
Show less

Title: Power Measurement for Road Bicycles: Towards a Universal Solution (Semester Unknown) IPRO 324: PowerMeasurementsForRoadBicyclesIPRO324Poster1Sp09
Creator: Anupoju, Tarun, Halim, Stephanus, Kaminski, Bryan, Lam, Brian, Marcellis, Brandon, Martin, Rebecca, Odunaiya, Edumaregbemiro, Stevanovic, Stefan, Tsosie, Henrietta, Voukadinov, Ivan, Ziomek, Arkadiusz
Date: 2009, 2009-05
Description: We would like to develop a system that measures the applied torque at a bicycle crank set. In contrast to current solutions, we want to be...
Show moreWe would like to develop a system that measures the applied torque at a bicycle crank set. In contrast to current solutions, we want to be able to retrofit our system to existing crank sets, obviating the need to abandon parts that the bicyclist already owns. In principle, according to preliminary tests performed at the MMAE department, this can be done using sets of quite inexpensive strain gauges. However, being able to get accurate torque measurements will require some advanced signal processing from the strain gauges. These signals can then be transmitted wirelessly to a bicycle computer like the Edge 705 that the global positioning system corporation Garmin released last year. There is a defined wireless protocol, called ANT+Sport, which has been developed specifically for the purpose of transmitting exercise data, such as power output or heart rate, to small computers. Chipsets and development kits for this protocol are also available commercially. Therefore, our task will be to find an optimal configuration of strain gauges that will be attached to the crank set, and to develop an algorithm to process the strain gauge data in order to isolate a signal that is proportional to the applied torque. This signal will then be transmitted to the bicycle computer for display and storage.
Deliverables
Show less

Title: The Effects of Green Technology on Electrical Contractors (Semester Unknown) IPRO 338: The Effects of Green Technology on Electrical Contractors IPRO 338 Final Report F08
Creator: Georgieva, Ludmila, Haurberg, Soren, Horwath, Joshua, Im, Hyeon, Johnson, Ross, La Luce, Mitchell, Lee, Jae, Lee, Yongdoo, Malawski, Frank, Manke, Alexandra, Mitchell, Jason, Odunaiya, Edumaregbemiro, Patel, Kunal, Pyciak, Mike, Stanard, Steve, Wong, Wing Hong, Tomal, Dan
Date: 2008, 2008-12
Description: The purpose of this IPRO is to develop a template for a website to host a user-friendly online database of green technologies information for...
Show moreThe purpose of this IPRO is to develop a template for a website to host a user-friendly online database of green technologies information for the Electrical Contractors’ Association of the City of Chicago. This website will involve providing data on green electrical products with cut sheets, pricing and distributor information, return on investment projections, and LEED certification facts. The use of this website should help create a well informed transition from industry standard electrical products, to green alternative products, as well as cut down on miscommunication between architects and electrical contractors.
Sponsorship: Electrical Contractors’ Association of the City of Chicago
Deliverables
Show less

Title: Power Plant Waste Heat Utilization for Greenhouse Applications (Semester Unknown) IPRO 342: AtomicProduceIPRO342PosterSp10
Creator: Aguirre, Marisol, Alvarez, Matthew, Bartus, Krzysztof, Chippo, Fatima, Fonk, Andrew, Harbour, Zachary, Hasbrouck, Joshua, Jeffcoat, Brooke, Jensen, Madeline, Kunkel, Emily, Lima, Nancy, Min Nam, Kyung, Patel, Tejash, Pope, Christopher, Qaisar, Samir, Zarazua, Gustavo, Zorra, I
Date: 2010, 2010-05
Description: The goal of this project was to determine the feasibility of using the heated waste water from the Braidwood Generating Station for use in...
Show moreThe goal of this project was to determine the feasibility of using the heated waste water from the Braidwood Generating Station for use in greenhouse applications. Though extremely efficient, the Braidwood Generating Station, like all nuclear power plants, still wastes two-thirds of all energy generated and pumps 1.5 million gallons per minute of warm waste water into its cooling lake. All of this thermal energy pumped into the cooling lake is wasted. IPRO 342 was looking to change that.
Deliverables
Show less

repository.iit

Search the repository

Pages

Pages