Search results

Title: Power Measurement for Road Bicycles: Towards a Universal Solution (Semester Unknown) IPRO 324: PowerMeasurementsForRoadBicyclesIPRO324FinalReportSp09
Creator: Anupoju, Tarun, Halim, Stephanus, Kaminski, Bryan, Lam, Brian, Marcellis, Brandon, Martin, Rebecca, Odunaiya, Edumaregbemiro, Stevanovic, Stefan, Tsosie, Henrietta, Voukadinov, Ivan, Ziomek, Arkadiusz
Date: 2009, 2009-05
Description: We would like to develop a system that measures the applied torque at a bicycle crank set. In contrast to current solutions, we want to be...
Show moreWe would like to develop a system that measures the applied torque at a bicycle crank set. In contrast to current solutions, we want to be able to retrofit our system to existing crank sets, obviating the need to abandon parts that the bicyclist already owns. In principle, according to preliminary tests performed at the MMAE department, this can be done using sets of quite inexpensive strain gauges. However, being able to get accurate torque measurements will require some advanced signal processing from the strain gauges. These signals can then be transmitted wirelessly to a bicycle computer like the Edge 705 that the global positioning system corporation Garmin released last year. There is a defined wireless protocol, called ANT+Sport, which has been developed specifically for the purpose of transmitting exercise data, such as power output or heart rate, to small computers. Chipsets and development kits for this protocol are also available commercially. Therefore, our task will be to find an optimal configuration of strain gauges that will be attached to the crank set, and to develop an algorithm to process the strain gauge data in order to isolate a signal that is proportional to the applied torque. This signal will then be transmitted to the bicycle computer for display and storage.
Deliverables
Show less

Title: STRUCTURAL SEISMIC PERFORMANCE EVALUATION WITH CONSIDERATION OF ECONOMIC VULNERABILITY
Creator: Romero, Daniela Zuloaga
Date: 2014, 2014-05
Description: Performance evaluation of structures has until now been based on evaluation of maximum displacements, interstory drifts, deformation patterns,...
Show morePerformance evaluation of structures has until now been based on evaluation of maximum displacements, interstory drifts, deformation patterns, ductility and other similar parameters; a relative economic loss estimation as a performance measure for the structure is the next step that follows, and is what has been investigated in this work. For this study a steel mid-rise structure was designed according to code provisions using modal spectral analysis, after which it was subjected to an Incremental Dynamic Analysis (IDA) procedure to evaluate the capacity curve of the building. The capacity analysis was then used to determine damage states and compute fragility curves. Finally, economic relative loss values were assigned to represent each designated damage state, for which the mean damage ratio was computed (in terms of economic loss relative to total replacement cost) as a function of spectral displacement.
M.S. in Civil Engineering, May 2014
Show less

Title: Urban Margins : An Architectural Narrative: Phillips - Masters Book
Creator: Phillips, Christopher
Date: 5/4/2011, 2011-05
Description: Manhattan’s expansion is limited by its context; for decades its growth has been upward and inward. It fills the remaining gaps and leftover...
Show moreManhattan’s expansion is limited by its context; for decades its growth has been upward and inward. It fills the remaining gaps and leftover spaces in its own fabric. As time presses on, this layered context grows in density, accumulating a thickness around the alley, the fire escape, and the rooftop. By resisting the city’s tendency to stifle, one can gather these moments of Manhattan’s past, and channel the interplay of space and narrative.
Show less

Title: Green Building Design Concept & Integration (sequence unknown), IPRO 335 - Deliverables
Creator: Avanessian, Aris, Banda, Justine, Bergerson, Joshua, Burke, Jeffrey, Christo, Robert, Dexter, Eric, Kim, Kibum, Mey, Andrew, Okunaga, Jonathan, Razeq, Ali, Schaefer, Jacqueline, Thovar Leon, Adrian, Um, Hye
Date: 2009-12
Description: The scope of this IPRO project spans structural, architectural, foundation, HVAC, lighting and electric system designs, as well as building...
Show moreThe scope of this IPRO project spans structural, architectural, foundation, HVAC, lighting and electric system designs, as well as building cost estimating and professional ethics. The IPRO team will become informed about and apply principles associated with green design concepts, energy sustainability, post occupancy comfort, acoustic design issues, smart building concepts, health issues (abatement of mold- and allergy-causing agents), and safety considerations.
Deliverables for IPRO 335: Green Building Design Concept & Integration for the fall 2009 semester
Show less

Title: IIT Saves Water (Summer 2011) IPRO 346: IIT Saves Water IPRO346 Summer 2011 Poster
Creator: Li, Cheng, Ruth, Anthony, Romo-ortiz, Esther, Kenward, Joshua, Patel, Mansi, Natarajan, Narayan, Rajagopalan, Raksha, Tapia, Rene
Date: 2011, 2011-07
Description: The purpose of this project is the advancement in knowledge of, and applied practical solutions to the challenges of sustainability in regards...
Show moreThe purpose of this project is the advancement in knowledge of, and applied practical solutions to the challenges of sustainability in regards to a very specialized area of water conservation. The harvesting of air conditioner condensate could potentially lead to the conservation of a great deal of both water and money. Pentair, a company specialized in providing water solutions, is interested in the technology to harvest the condensate from A/C in buildings, and is our sponsor. We aimed to create public awareness surrounding the potential non-potable use of air conditioner condensate through demonstration and presentation. The IPRO Team of Summer 2011 will advance the prior work by focusing upon building public awareness and working to change public policy. The Team will utilize social media promotional strategies/messages and implementation. The Team will also identify the practical and political barriers to main stream harvesting of condensate and develop action plans to overcome the barriers. The two activities of the Team will be to build public enthusiasm for condensate harvesting via social media and secondly to summarize all IPRO condensate efforts into a presentation with collateral materials and share it with organizations that have outreach missions of sustainability and conservation.
Sponsorship: Pentair, Inc
Project Plan for IPRO 346: IIT Saves Water for the Summer 2011 semester
Show less

Title: New Product Evaluation and Improvement (Semester Unknown) IPRO 341: NewProductEvaluationandImprovementIPRO341FinalPresentationSu09
Creator: Assaliyski, Marin, Attard, Ryan, Basiourski, Vitali, Dorn, Lawrence, Feldman, Laurie, Grabowski, Luke, Guerrero, Jose, Rusz, Vlad, Tchobanova, Natacha, Zellarchaffers, Priscilla
Date: 2009, 2009-07
Description: The team’s purpose is to test the current new design for Versatility Tool Works cabinet, and make suggestions for improvements if needed....
Show moreThe team’s purpose is to test the current new design for Versatility Tool Works cabinet, and make suggestions for improvements if needed. Additionally, the team’s purpose was extended to develop a next‐generation tool storage cabinet and also to identify potential new markets for the company to pursue. This will require a truly inter‐professional team to analyze everything from the engineering of the tool storage cabinet to market research of the current and potential markets.
Deliverables
Show less

Title: Assessiong and Improving Interprofessional Education at IIT (semester ?), IPRO 339: Assessing and Improving Interprofessional Education at IIT IPRO 339 Poster 2 Sp05
Creator: Timothy, Britt, Levi, Citrin, Jake, Crulcich, Vlad, Gutkovsky, Megan, Mims, Natalie, Orrison, Alana, Platt, Sagar, Shah, Victoria, Strokova, Sonia, Vajaria, Rachel, Wasserman, Nicholas, Williams
Date: 2005-05, 2005-05
Description: IPRO 339 members have a set of goals in terms of assessing the IPRO program at IIT, creating and selecting IPRO proposals, developing training...
Show moreIPRO 339 members have a set of goals in terms of assessing the IPRO program at IIT, creating and selecting IPRO proposals, developing training materials for IPRO Learning Objectives and supporting marketing of the IPRO program.
Sponsorship: Tom Jacobius
Deliverables for IPRO 339: Assessing and Improving Interprofessional Education at IIT
Show less

Title: Friendly Forces Finder (Semester Unknown) EnPRO 350: FriendlyForcesFinderEnPRO350PosterSp10
Creator: Algie, Teague, Braband, Jim, Clovsky, Aaron, Hoylman, Phillip, Hutchins, Sarah, Kawa, Konrad, Marks, Matthew, Miranda, Jose, Patel, Purvag, Stogner, Jason
Date: 2010, 2010-05
Description: GPS modules and tracking devices have influenced many advances in modern technology. The data GPS provides has replaced the map and compass,...
Show moreGPS modules and tracking devices have influenced many advances in modern technology. The data GPS provides has replaced the map and compass, and can be crucial in many situations. Its current platform for use however requires the user to utilize a handheld device and direct his/her frame of view to a screen. In many situations there is a need to have eyes on and full awareness of surroundings, something that simply can't be done while holding and viewing a handheld device. To solve this dilemma, team Smart Specs has integrated ideas of GPS, heads-up displays, and datalink technology to form a design that will give the user full hands free capabilities. This device, worn like glasses, allows the user to track objects and even designate objects to be tracked, which are all shown through heads-up display.
Deliverables
Show less

Title: Intermodal Container Transport (Semester Unknown) IPRO 307: IntermodalContainerTransportIPRO307FinalPresentationSp09
Creator: Cabrera, Intermodal Container Transport, Dennis, Nicole, Jackson, Cordell, Kozys, Karolis, Montgomery, Thomas, Patel, Vaiibhav, Rathakrishnan, Malarva, Razeq, Ali, Rokita, Richard, Rueda, Jorge, Skopek, Paul, Snyder, Cody
Date: 2009, 2009-05
Description: Chicago is the third largest intermodal freight hub in the world. As a result, there is need for efficient routing of trains throughout the...
Show moreChicago is the third largest intermodal freight hub in the world. As a result, there is need for efficient routing of trains throughout the Chicago area. One aspect of railroad transport that directly affects the overall efficiency of the rail system is how easily accessible train intermodal yards are for trucks going to and through the intermodal yards. With this in mind, the overall purpose and objective of IPRO 307 is to improve the truck flow in and around an intermodal facility at Harvey, IL which is owned by Canadian National (CN) lines. CN is one of the six major railroads that serve the Chicago area. The intermodal facility at Harvey is surrounded by a network of highways including Interstates 80, 57, 294, 94 and 65. Interstates 294 and 80 cross directly overhead of the intermodal yard. In order to make truck flow around the intermodal yard more efficient, IPRO 307 will look into the addition of ramps and frontage roads, including a ramp that would be based off of interstates 80/294. A ramp connecting the major interstate to the intermodal facility would allow for easier access to the intermodal facility by trucks, thereby bettering the efficiency of the intermodal facility as a whole.
Deliverables
Show less

Title: COORDINATE-EXCHANGE ALGORITHM CONSTRUCTION OF UNIFORM SPACE FILLING DESIGN
Creator: Han, Shipeng
Date: 2014, 2014-05
Description: Many scientific phenomena are now investigated by complex computer models. A computer experiment is a sequence of runs with various inputs....
Show moreMany scientific phenomena are now investigated by complex computer models. A computer experiment is a sequence of runs with various inputs. The uniform experimental design seeks its design points to be uniformly scattered on the experimental domain and is one kind of a space-filling design that can be used for computer experiments and OK for industrial experiments. The coordinate-exchange method we use is one-dimensional constrained optimization, searching for the optimal coordinate to make the points filling the space uniformly. This method saves large amounts of calculation compared to the multivariate optimization problems. In this thesis we provide the coordinate-exchange algorithm and demonstrate our methodology with numerical examples. Key words: Coordinate-exchange, Uniform design, Computer experiment, Space-filling design, optimal design.
M.S. in Applied Mathematics, May 2014
Show less

Title: alcometer: AlcometreEnPRO351PosterF09
Creator: Abdullah, Khairul, Adeola, Olaoluwa, Apampa, Kunle, Arrowood, Renee, Braband, Jim, Entler, Jason, Geelen, Jeremy, Sung Hwang, Kyu, Liu, Xingshuo, Morales, Eduardo
Date: 2009, 2009-12
Description: The purpose of IPRO 351 is to research and develop a device that will be a non- invasive blood alcohol concentration (BAC) meter. Our mission...
Show moreThe purpose of IPRO 351 is to research and develop a device that will be a non- invasive blood alcohol concentration (BAC) meter. Our mission is to provide a safe and accurate BAC device that will help reduce the amount of people who drive while impaired. IPRO 351 has a vision of having a non-invasive biometric blood alcohol ignition interlock device (BBAIID) that can be installed on any vehicle.
Deliverables
Show less

Title: Improving Electrical Efficiency With Building Information Modelling (Semester Unknown) IPRO 338: ImprovingElectricalEfficiencyWithBuildingInformationModelingIPRO338FinalPresentationF09
Creator: Kyung Cho, Bum, Crites, Sarah, Czapla, Sarah, Guerrero, Jose, Kim, Yoosuk, Malawski, Frank, Maloney, Michael, Pedrina, Kaleo, Qiu, Li, Yi, Jennifer
Date: 2009, 2009-12
Description: To identify ways to improve the efficiency of electrical contracting projects through new software and technology, communications, and project...
Show moreTo identify ways to improve the efficiency of electrical contracting projects through new software and technology, communications, and project management techniques, especially through Building Information Modeling (BIM) utilization.
Deliverables
Show less

Title: Tsunami Relief (semester?), IPRO 308: Tsunami Relief IPRO 308 Final Report Sp05
Creator: Winter, Tim, Godfrey, Nate, Gupta, Nishi, Pitariu, Anca, Civelekoglu, Derya, Murawski, Jonathan, Dela Vega, Dave, Amarnath, Mayuri
Date: 2005-05, 2005-05
Description: The project will be a continuing multi-semester development. The first semester will be a period where the students and faculty decide which...
Show moreThe project will be a continuing multi-semester development. The first semester will be a period where the students and faculty decide which route to take, research the feasibility, research old or create new designs, structure a plan, and set up the contacts necessary to achieve one or more of the following: (1) Plan and design a clinic, (2) Plan and design a school, (3) Research problems and difficulties that current relief organizations have been encountering and develop viable solutions, (4) plan and design (and build?) cost-effective homes in collaboration with other universities (e.g. University of Houston).
Deliverables for IPRO 308: Tsunami Relief for the Spring 2005 semester
Show less

Title: Track Elevation
Creator: Badger, Le Roy, Walbridge, John T.
Date: 2009, 1907
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/trackelevation00badg
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaves 34-36

Title: Chujio (Semester Unknown) IPRO 303: ChujioIPRO302FinalReportF10
Creator: Kumar, Aditi, Curtis, Christopher, Vysotskiy, Dmitriy, Ramirez, Ernesto, Abu-amara, Hashem, Chun, Jason, Jewell, John, Varga, Kalman, Michael, Mark, Koto, Melanie, Tagny, Patrick
Date: 2010, 2010-12
Description: Solutions through Coaliition
Sponsorship: NAVTEQ
Deliverables

Title: Social Network Analysis for Pace Suburban Bus Stakeholders (semester?), IPRO 321: Pace Project IPRO 321 Poster Sp05
Creator: Hahn, Young Ae, Basu, Nivedita, Block, Nathaniel, Cechova, Lenka, Colbath, Geoff, Dronamraju, Rahul, Dulinskas, Alexis, Gajera, Rinku, Hart, Joseph, Patel, Griva, Piedra, Carmelina, Sabady, Stacie, Schubert, Hannah, Thongsomjit, Papinya, Vandermolen, Douglas
Date: 2005-05, 2005-05
Description: The Communication Design Workshop is an IPRO and is cross-listed with this main campus program. The sponsor is Pace, a successful and forward...
Show moreThe Communication Design Workshop is an IPRO and is cross-listed with this main campus program. The sponsor is Pace, a successful and forward looking suburban Chicago bus company serving a six county market the size of Rhode Island. The focus of the workshop is to identify factors that will help Pace retain riders. Retention is a significant issue as it has direct financial implications and Pace does not know why they lose riders. Communication issues may be part of the retention problem. Pace will share existing research with us — we will extend and supplement this work.
Sponsorship: Pace
Deliverables for IPRO 321: Social Network Analysis for Pace Suburban Bus Stakeholders for the Spring 2005 semester
Show less

Title: Low-Cost Water Purification System Design & analysis for Applications in Mexico and the US (semester?), IPRO 355
Creator: Aderangi, Vince, Gomez Balboa, Adrian, Craig, Seun, Gilliam, Amanda, Grimmer, Laura, Jimenez, Esmeralda, Martis, Isaac, Nambiar, Abhilash R., Nguyen, Uyen, Nuanual, Ruckfa Mek, Ogunsanwo, Olumide, Primozic, Chris, Ramirez, Eugenio, Young, Daniel
Date: 2006-05, 2006-05
Description: The main objective of the IPRO is to provide direct health services to low-income socieites, specifically Mexico, by the design of a water...
Show moreThe main objective of the IPRO is to provide direct health services to low-income socieites, specifically Mexico, by the design of a water purification filter. The IPRO will design a clay based filter and a business plan with the aim of introduction into these societies. The filter should be simple to use, affordable, simple to setup, easy to maintain and should be adaptable to a variety of every day househould activities such as drinking, bathing and washing.
Deliverables for IPRO 355: Low-Cost Water Purification System Design & analysis for Applications in Mexico and the US for the Spring 2006 semester
Show less

Title: Zinc nitride, its formation, properties and alloys
Creator: Savoye, W. J., Edwards, A. R.
Date: 2009, 1921
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/zincnitrideitsfo00savo
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaves 25-28

Title: Trailer Loading Optimization Group (Semester Unknown) IPRO 305: TrailerLoadingOptimizationGroupIPRO305FinalPresentationSp10
Creator: Hinshaw, Benjamin, Taylor, Donald, Patel, Nixalkumar, Buakong, Nuntana, Shah, Parth, Surendran, Prashanthan, Mckeever, Sean, Pekalski, Tom, Veitch, Robert, Liu, Xingshuo
Date: 2010, 2010-05
Description: DSC Logistics and Supply Chain Management
Deliverables

Title: Informal Learning with Twitter
Creator: Wilhelm, Eva C.
Date: 2011-04-25, 2011-05
Description: Twitter use has evolved from status updates to a broad range of uses from personal broadcasting to information sharing and conversations. A...
Show moreTwitter use has evolved from status updates to a broad range of uses from personal broadcasting to information sharing and conversations. A study was conducted to determine how Twitter is used for informal learning purposes. It was examined what kind of questions with a learning objective are asked, and under which circumstances these questions are answered. Questions were categorized according to question topic, type, structure and audience. According to the analysis, users most frequently asked for definitions and procedural information about technology, web, software and Twitter use. The questions with the highest answer rate were questions directed at individual users via @replies, and asked about definitions and other factual information.
M.S. in Technical Communication and Informational Design, May 2011
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of