Search results

Title: Automated control and monitoring of thermal processing using high temperature, short time pasteurization
Creator: Schlesser, J. E., Armstrong, D. J., Cinar, A., Ramanauskas, P., Negiz, A.
Date: 1997-10
Publisher: AMER DAIRY SCIENCE ASSOC
Description: High temperature, short time pasteurization was used to evaluate a computer-based system for controlling the pasteurization process, acquiring...
Show moreHigh temperature, short time pasteurization was used to evaluate a computer-based system for controlling the pasteurization process, acquiring data, and monitoring records. Software was used for the control of hot water temperature, flow rate through the centrifugal timing pump, and diversion of under-processed product. Three types of control strategies were conducted: single loop, cascade, and multivariable. The single loop control strategy showed the most rapid responses to temperature changes, but the temperature response curve was slowest to return to its set point. The cascade control strategy showed slower recoveries to temperature changes, but the temperature response curve was smoother. The multivariable control strategy responded slightly faster than the cascade control strategy, and the temperature response curve was slightly smoother than the cascade control strategy. The multivariable control strategy was able to control the flow diversion valve by the use of a lethality controller. The data acquisition system, used to monitor the data obtained from the high temperature, short-time pasteurization system, was within +/- 0.1 degrees C of the temperature recorded by the safety thermal limit recorder. Reliability was determined by examining the changes in the position of the flow diversion valve to identify process deviations and by comparing the changes to the event marker on circular charts. The data acquisition system was an effective alternative for monitoring the completeness of data.
Endnote format citation
Show less

Title: Friendly Forces Finder (Semester Unknown) EnPRO 350: FriendlyForcesFinderEnPRO350MidTermPresentationF10
Creator: Conover, Stephen, Braband, Jim, Clovsky, Aaron, Hoylman, Phillip, Hutchins, Sarah, Kawa, Konrad, Bohac, Adam, Roa, Carlos, Wendt, Kevin, Boschert, Drew, Tejada, Saek, Stogner, Jason
Date: 2010, 2010-12
Description: Develop a system that provides a hands-free, networked navigational aid with team tracking capabilities and to develop a market entrance...
Show moreDevelop a system that provides a hands-free, networked navigational aid with team tracking capabilities and to develop a market entrance strategy.
Sponsorship: 3F
Deliverables
Show less

Title: Zero Energy Home 1114 W Roscoe Ave (Semester Unknown) IPRO 317: ZeroEnergyHomeIPRO317ProjectPlanF09
Creator: Bhat, Adnan, Campbell, Brittanie, Cink, Jefferey, Gutstein, Yehuda, Hadi, Shuaib, Hafdi, Kamal, Hasan, Hasan,, Kenig, Elezar, Lipski, Brian, Lollino, Luca, Margolis, Jordan, Nigamatzyanov, Tagir, Patel, Hiren, Patel, Neal, Shehada, Hazem, Toops, Melissa, Trauner, Crystal, Zgourdah, Mourad
Date: 2009, 2009-12
Description: Design of a sustainable net zero energy building with zero carbon emission at a traditional construction cost. - Promote the use of this...
Show moreDesign of a sustainable net zero energy building with zero carbon emission at a traditional construction cost. - Promote the use of this design as a template for other homes in the future.
Sponsorship: Jimmy Eng
Deliverables
Show less

Title: Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Orthotics and Prosthetics Edu in Latin America IPRO 309 IPRO Day Presentation Sp07
Creator: Bagby, Allison, French, Elise, Gracia, David, Maksimowicz, Peter, Morley, Michael, Pellico, Christopher, Prabhu, Vinit, Rife, Carolanne, Sedacki, Karen, Valls, Nil
Date: 2007-05, 2007-05
Description: Primary Objective The primary objective of this IPRO is to support the development of the first International Society of Prosthetics and...
Show morePrimary Objective The primary objective of this IPRO is to support the development of the first International Society of Prosthetics and Orthotics (ISPO) accredited Category 3 program in Latin America. Secondary Objectives The secondary objectives are necessary for accomplishing the primary objective. To ensure that the program will be accredited, many guidelines must be followed; these guidelines have set the secondary objectives as follows: • Develop several educational modules concerning common diseases and their orthotic treatments • Develop several low-cost demonstrations and hand-outs to compliment the educational modules • Carefully follow ISPO requirements to ensure accreditation • Translate all material to Spanish for use in Latin America • Develop a three day short course to be presented at a Prosthetics and Orthotics conference at Bogotá, Colombia in May 2007 • Work with educators in Colombia to develop a program similar to IPRO 309
Deliverables for IPRO 309: Education and Technical Support of Prosthetics and Orthotics Education in Latin America for the Spring 2007 semester
Show less

Title: Robbins Community Power (Summer 2011) IPRO 347
Creator: Ahn, Yoona, Alhassan, Abdalmohsen, Johnson, Ashleigh, Khan, Nomair, Kois, Carolyn, Munoz, Matthew, Toy, Robert, Young, Julieann
Date: 2011, 2011-07
Description: IPRO 347 is a continuation of an IPRO, which previously explored ways to utilize waste heat and CO2 from Robbins Community Power Plant. The...
Show moreIPRO 347 is a continuation of an IPRO, which previously explored ways to utilize waste heat and CO2 from Robbins Community Power Plant. The concluding thought from that project was that the plant would need to select a source of greenwood to burn. The goal of IPRO 347 is to establish a plan for the Robbins Community Power Plant to gather and utilize the green waste of urban lumber. The main task is to research opportunities for RCP to gather a supply of greenwood. The items being researched are estimated expenses and profits, whom will be participating, the availability of our raw good—greenwood—and potential buyers.
Sponsorship: Robbins Community Power Plant
Project Plan for IPRO 347: Robbins Community Power for the Summer 2011 semester
Show less

Title: Browser-Based Workgroup Collaboration (Spring 2001) IPRO 371-471: Browser-Based Workgroup Collaboration IPRO371-471 Spring2001 Final Presentation
Date: 2001, 2001-05
Description: The objective of this project is to identify, evaluate and recommend a browser-based workgroup collaboration tool. The IPRO team will develop...
Show moreThe objective of this project is to identify, evaluate and recommend a browser-based workgroup collaboration tool. The IPRO team will develop a requirement definition for a browser-based workgroup collaboration tool by interviewing selected personnel at General Motors Electro-Motive Division (EMD). Using this requirement definition, candidate solutions will be identified and evaluated. Based on a combination of factors, including weighted requirements, adherence to technology standards, and cost of implementation, the team will recommend at least two alternative solutions. The recommendation should identify the preferred solution and suggest a negotiating strategy and a deployment strategy for that solution. At the end of the project, the team will be able to provide a requirement definition, weighted by importance, an evaluation matrix depicting each solution considered, a summary evaluation of each solution considered, and a recommendation of the software, hardware, negotiating strategy and deployment strategy for two possible solutions.
Sponsorship: General Motors Electro-Motive Division
Project Plan for IPRO 371-471: browser-Based Workgroup Collaboration for the Spring 2001 semester
Show less

Title: Growing Water: 31st Street Eco-Boulevard and IIT Pavilion Prototype (Semester Unknown) IPRO 322: Growing Water 31st St. Eco-Boulevard and IIT Pavilion Prototype IPRO 322 Final Report Sp08
Creator: De Vita, Niels, Kreitzer, Michael, Oh, Hyunjoo, Vassi, Anna, Boder, Matthew, Johnson, Drew, Fong, Patrick, Ramey, Ronald, Stopic, Milena, Irish, Sean, De Marco, Juan, Urdiales, Miguel, Blackketter, Joshua, Konwar, Riju, Kuzmicki, Kamil
Date: 2008, 2008-05
Description: • To create publicity and awareness about the state of Chicago water and the need to start taking steps to preserving and restoring it. • To...
Show more• To create publicity and awareness about the state of Chicago water and the need to start taking steps to preserving and restoring it. • To create a catalog of sustainable methodologies to be implemented in an urban planning strategy throughout the city of Chicago. • Enhance the impact of the Eco-Boulevards in the community. • Collaborate with the city of Chicago and the project team regarding possible implementation of ecological strategies regarding water. • To research and share methods, techniques, practices, equipment, biology, etc. of functional living machines and make it available knowledge. • To establish a social program for the living machine Pavilions to create public interaction points with the ecological function of the living machine.
Deliverables
Show less

Title: Noise Abatement Issue (Spring 2002) IPRO 315: Noise_Abatement_Issue_IPRO315_Spring2002_Final_Presentation
Date: 2002, 2002-05
Description: Penn Machine Company, Johnstown, Pennsylvania, is a recognized leader in the manufacture and marketing of wheel sets for high speed and local...
Show morePenn Machine Company, Johnstown, Pennsylvania, is a recognized leader in the manufacture and marketing of wheel sets for high speed and local rail transportation operations. Penn Machine manufactures noise-damping wheels, including the PCC Standard Resilient Wheel, the first successful resilient transit wheel, and the Bochum 54 and 84 resilient wheels under license from Fried. Krupp Huttenwerke A.G., Bochum, Germany. These resilient composite material wheel sets produced by Penn Machine Company have been widely accepted in light rail operations around the world (e.g. Paris, Berlin, San Francisco, Washington, D.C.). However, even though they provide longer life and reduced maintenance, and most significantly lower noise, etc., they have a higher initial cost than the current wheels used in rapid transit operations like the Chicago Transit Authority (CTA). This has made it very challenging to gain interest and acceptance by those responsible for rapid transit purchase decisions that impact engineering, maintenance, finance and operations.At this time, Penn Machine Company is interested in supporting an IPRO team that would study the complex combination of technical, marketing, financial, and community issues associated with demonstrating, specifying and accepting resilient wheel product technology in rapid transit applications. An IPRO team can play an important role in defining the complete "value proposition" for a rapid transit operation like the CTA, and provide independent, unbiased views on the full benefits vs. costs of their resilient wheel product technology. A particular benefit of an IPRO team working on this problem is that IIT students and consulting faculty can prepare their analysis and recommendations from a local Chicago perspective. There are several tasks that the team can undertake, based on guidance provided by the sponsor and available time during the semester: (1) review extensive engineering analyses and research reports and studies available from Penn Machine Company and its German licensor to fully understand and confirm the best available technology for rail wheel performance enhancement, and noise and vibration mitigation; (2) review the state-of-the-art and visit rapid transit and light rail operations in the U.S.;(3) evaluate procurement and purchase decision processes associated with rail car and other capital equipment investments in the passenger rail transportation industry;(4) study the variety of financial analyses (first cost, life cycle cost, present value analysis, etc.) used to support purchase decision making for products with high initial cost but competitive life cycle cost in various industries;(5) study the historical context of urban development, decline and renewal that influence social, political and economic cost-benefit considerations of noise, vibration and other environmental issues associated with local transit operations, ridership, and affected communities and structures adjacent to rail right-of-way; and(6) study the effect of government regulations (e.g., Federal Railway Administration) and related industry standards and practices (American Association of Railroads, Occupational Safety and Health Administration) on the specification and purchase of technologies that have long term economic and social benefit. In general, the IPRO team may identify creative approaches for enhancing the "value proposition" for marketing these rail wheel set products. The results of the IPRO team's work should be focused to developing a thorough, broad study of technical, economic, organizational, business/marketing, and community issues. The goal is to create a compelling case for gaining rail transit commitment to collaborate on demonstrating the efficacy of resilient wheel products offered by Penn Machine Company.
Sponsorship: NA
Project Plan for IPRO 315: Noise Abatement Issue for the Spring 2002 semester
Show less

Title: Carbon Footprint of Automobiles (Semester Unknown) IPRO 322: CarbonFootprintOfAutomobilesIPRO322FinalReportSp10
Creator: Bais, Rajiv, Burian, James, Choi, Lien, Fournier, Andrew, Mora, Andres, Rafalko, Susan, Shonekan, Morayomola, Swanston, Seantoia, Vasilev, Teodora, Yi, Won-jae, Yu, Mary
Date: 2010, 2010-05
Description: The goal of the IPRO 322 team is to develop and present a “User friendly” way of identifying vehicles with respect to the emission of...
Show moreThe goal of the IPRO 322 team is to develop and present a “User friendly” way of identifying vehicles with respect to the emission of greenhouse gases throughout their life cycle.
Deliverables
Show less

Title: Cardiovascular Display for Pre and Post Natal (semester 1 of unknown), IPRO 341
Creator: Budiman, Alex, Dunaway, Eric, Lin, Grace, Moy, Calvin, Pitroda, Sean, Narayan, Justin, Ravella, Shalini, Shrivastava, Archita, Thakore, Suruchi, Tuthill, Christopher, Vankawala, Anand, Vasu, Kedari, Wright, Michael
Date: 2005-01, 2004-12
Description: IPRO 341 worked with the science and exhibit development staff of the Museum of Science and Industry (MSI) to develop a working prototype of a...
Show moreIPRO 341 worked with the science and exhibit development staff of the Museum of Science and Industry (MSI) to develop a working prototype of a cardiovascular display of blood flow from a pre to postnatal system. MSI is currently developing a number of new human physiology and health displays.
Sponsorship: Museum of Science and Industry
Deliverables
Show less

Title: Coal Combustion Residual Solutions (Spring 2011) IPRO 302: CCR SolutionsIPRO302FinalReportSp11
Creator: Firnbach, Nicole, Agosto, Jennifer, Burnett, Shana, Enriquez, Sheena, Herman, Robert, Kipp, Daniel, Parker, Chad, Port, Graeme, Rafalko, Susan, Sanchez, Joseph, Gardner, Andrew
Date: 2011, 2011-05
Description: Team Vision/Mission The purpose of the IPRO 302 team, sponsored by Sargent & Lundy, is to evaluate the environmental and cost impacts of...
Show moreTeam Vision/Mission The purpose of the IPRO 302 team, sponsored by Sargent & Lundy, is to evaluate the environmental and cost impacts of closing an ash pond at an active power plant, as well as consider alternative beneficial uses for coal combustion residuals (CCR) and wastewater that can contribute to a sustainable solution. Objectives ● Current status of regulations for CCR and wastewater ● Alternatives for disposing of ash ● A recommended alternative for disposal or reuse of the bottom ash ● A recommended alternative for treatment and disposal of wastewater ● Cost impact of closure of an existing unlined ash pond
Sponsorship: Sargent & Lundy
Deliverables
Show less

Title: Orthotics and Prosthetics in Latin America (Semester Unknown) IPRO 309: Orthotic and Prosthetic Education for Latin America and the United States IPRO 309 Poster F08
Creator: Antony, Claude, Bhatia, Mrigank, Castro, Manuel, Fischer, Stephanie, Hallgren, Caleb, Harris, Raymond, Kovacs, Cristina, Madere, Danielle, Rial, Alexander, Salgado, Chris
Date: 2008, 2008-12
Description: Many people around the world are in need of orthotic and/or prosthetic care due to pathologies that cannot be effectively treated any other...
Show moreMany people around the world are in need of orthotic and/or prosthetic care due to pathologies that cannot be effectively treated any other way. There is a great need for establishing and sustaining educational opportunities. Our IPRO focuses on the population of South America, and more specifically Colombia. Our goal is to provide them with educational information to support their existing Orthotic and Prosthetic (O&P) Technician training program at Centro don Bosco in Bogotá. We will continue the work of previous IPROs by creating modules that concentrate on O&P solutions to pathologies that occur on different areas of the body, specifically upper limb, spine, and lower limb. This semester we will also test the effectiveness of our educational modules by using the modules exclusively to fabricate an actual orthotic device. Our modules will also be translated to Spanish for the audience in Colombia.
Deliverables
Show less

Title: Large Scale Structure (semester?), IPRO 315: Large Scale Structure IPRO 315 Midterm Report F07
Creator: Beltran, Julian J., Carden, Joe, Dominikowski, Marek, Janulis, Lukas, Kapecki, John, Khudeira, Mohamad, Palladino, Nicholas, Patel, Saagar, Patel, Viral, Sawulski, Piotr, Shen, Jie-hua, Stine, Elijah, Thomas, Seth, Williams, David, Zaatar, Yousef
Date: 2007-12, 2007-12
Description: The IPRO 315 team’s objective for this semester is to design a automated car parking structure. However, the team’s main objective is to...
Show moreThe IPRO 315 team’s objective for this semester is to design a automated car parking structure. However, the team’s main objective is to create the most cost efficient and space saving parking lot. This team will also attempt to establish a strong team-working environment based on the knowledge and capabilities of each individual given their different fields of study for the successful completion of the goals presented for the IPRO group, as well as gaining useful experience and knowledge for every member. During the fall semester, the team has set forth the following objectives:  Analyze different parking methods based on different building shapes  Define crucial resources used in these processes and structure them  Research costs associated with this parking structure
Deliverables for IPRO 315: Large Scale Structure for the Fall 2007 semester
Show less

Title: Assessing and Improving Interprofessional Education at IIT (semester ?), IPRO 339
Creator: Luxmi, Raj, Glenon, Thomas, Trevor, Nicole, Allen, Meredith, Clark, Brian, Curtis, Reginald, Fakhouri, Younan, Mirichev, Silvia
Date: 2006-05, 2006-05
Description: The goal of IPRO 339 team is to create and select IPRO proposals, develop online training materials for IPRO Learning Objectives and develop...
Show moreThe goal of IPRO 339 team is to create and select IPRO proposals, develop online training materials for IPRO Learning Objectives and develop teamwork building games.
Sponsorship: Tom Jacobius; Mike Cama; Rebecca Peel; Abhinav Pamulaparthy
Deliverables for IPRO 339: Assessing and Improving Interprofessional Education at IIT for the Spring 2006 semester
Show less

Title: Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Educational and Technical Support of Orthotics and Prosthetics Education in Latin America and the US IPRO 309 Project Plan Sp08
Creator: Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
Date: 2008, 2008-05
Description: There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less

Title: Street pavement for Rushville, Illinois
Date: 2009, 1914
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/streetpavementfo00pome
Thesis (B.S.)--Armour Institute of Technology; Includes folded leaves in back pocket

Title: Apparatus and Method for Encapsulating Pancreatic Cells
Creator: Hatziavramidis, Dimitri T.
Date: 2012-03-20, 2012-01-10
Description: An apparatus and method for coating micron-sized or sub-micron-sized particles such as living cells. The coating apparatus includes an...
Show moreAn apparatus and method for coating micron-sized or sub-micron-sized particles such as living cells. The coating apparatus includes an encapsulation chamber enclosing a two-layer water-oil system for coating each islet cell with an aqueous polymeric coat. Islets together with an aqueous polymer solution are fed by a feed device that utilizes the principle of hydrodynamic focusing in order to ensure encapsulation of individual islets. The polymer in the aqueous coat is subsequently crosslinked by being exposed to laser light to produce structurally stable microcapsules of controllable thickness of the order of tens of microns. Encapsulated islets are removed from the encapsulation chamber by a valveless pump and recovered by filtration or centrifugation.
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: PLANNING FOR HUMAN IMPLANTATION OF A CORTICAL VISUAL PROSTHESIS (Semester Unknown) IPRO 334: PlanningForHumanImplantationOfACorticalVisualProthesisIPRO334FinalReportF09
Creator: Bern, David, Chen, Shanyl, Deroo, Mary, Gorski, David, Kelley, Tom, Leasenby, Alex, Li, Harry, Subhani, Maham, Taneja, Aanchal
Date: 2009, 2009-12
Description: We are providing a consultation to the sponsor, the IIT Visual Prosthesis Team, on how to proceed with preparation for human implantation of...
Show moreWe are providing a consultation to the sponsor, the IIT Visual Prosthesis Team, on how to proceed with preparation for human implantation of their intracortical visual prosthesis, which will be accomplished by researching different aspects and requirements for said implantation with an emphasis on subject perspective and selection. The device itself consists of electrode modules implanted in the visual cortex of individuals with blindness. By inducing a current in the modules, the volunteer would potentially perceive phosphenes, or light perceptions similar to camera flash afterimages, which could possibly form functional vision. The sponsor’s study would be focused on developing an assistive device for individuals with complete blindness.
Deliverables
Show less

Title: Vacuum jacketing vs. steam jacketing
Creator: Gentry, T. E., Wernick, F. E.
Date: 2009, 1910
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/vacuumjacketingv00gent
Thesis (B.S.)--Armour Institute of Technology

Title: AISC 2003 Student Steel Bridge Competition (Spring 2003) IPRO 310: AISC 2003 Student Steel Bridge Competition IPRO310 Spring2003 Final Presentation
Date: 2003, 2003-05
Description: The annual steel bridge competition is sponsored by the American Institute of Steel Construction (AISC) and the American Society of Civil...
Show moreThe annual steel bridge competition is sponsored by the American Institute of Steel Construction (AISC) and the American Society of Civil Engineers (ASCE). Students will design and construct a steel bridge based on specifications provided by the American Institute of Steel Construction (AISC). For design analysis, a computer program such as SAP 2000 may be used. After the design is finalized, students will develop shop drawings of the bridge and connection details using AUTOCAD. Fabrication of the bridge is based on theses drawings. The team will participate in a competition held on campus of a university in the Great Lakes region and judged based on AISC criteria. A team that competes successfully can benefit from students from several disciplines beyond civil engineering since there are significant tasks involving marketing, fundraising,preparing documentation, and organizing and delivering a compelling presentation.
Sponsorship: ASCE, STS, IHC, KENNY, TURNER, ARLINGTON STEEL
Project Plan for IPRO 310: AISC 2003 Student Steel Bridge Competition for Spring 2003 semester
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of

Rights