Search results
(1 - 20 of 21)
Pages
- Title
- Power Measurement for Road Bicycles: Towards a Universal Solution (sequence unknown), IPRO 324 - Deliverables: IPRO 324 Brochure F09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available measuring systems are not very accurate.
Deliverables for IPRO 324: Power Measurement for Road Bicycles: Towards a Universal Solution for the fall 2009 semester
Show less
- Title
- Power Measurement for Road Bicycles: Toward a Universal Solution (Semester Unknown) IPRO 324: PowerMeasurementForRoadBicyclesIPRO324FinalPresentationF09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009, 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available IPRO 324 Project Plan Page: 4 measuring systems are not very accurate. In order to achieve our goals and to improve the current technology, our IPRO is divided into two groups: the mechanical and the electrical team.
Deliverables
Show less
- Title
- Power Measurement for Road Bicycles: Towards a Universal Solution (sequence unknown), IPRO 324 - Deliverables: IPRO 324 Poster F09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available measuring systems are not very accurate.
Deliverables for IPRO 324: Power Measurement for Road Bicycles: Towards a Universal Solution for the fall 2009 semester
Show less
- Title
- Power Measurement for Road Bicycles: Towards a Universal Solution (sequence unknown), IPRO 324 - Deliverables
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available measuring systems are not very accurate.
Deliverables for IPRO 324: Power Measurement for Road Bicycles: Towards a Universal Solution for the fall 2009 semester
Show less
- Title
- Power Measurement for Road Bicycles: Toward a Universal Solution (Semester Unknown) IPRO 324: PowerMeasurementForRoadBicyclesIPRO324BrochureF09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009, 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available IPRO 324 Project Plan Page: 4 measuring systems are not very accurate. In order to achieve our goals and to improve the current technology, our IPRO is divided into two groups: the mechanical and the electrical team.
Deliverables
Show less
- Title
- Power Measurement for Road Bicycles: Towards a Universal Solution (sequence unknown), IPRO 324 - Deliverables: IPRO 324 Project Plan F09_redacted
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available measuring systems are not very accurate.
Deliverables for IPRO 324: Power Measurement for Road Bicycles: Towards a Universal Solution for the fall 2009 semester
Show less
- Title
- Power Measurement for Road Bicycles: Toward a Universal Solution (Semester Unknown) IPRO 324: PowerMeasurementForRoadBicyclesIPRO324ProjectPlanF09_redacted
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009, 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available IPRO 324 Project Plan Page: 4 measuring systems are not very accurate. In order to achieve our goals and to improve the current technology, our IPRO is divided into two groups: the mechanical and the electrical team.
Deliverables
Show less
- Title
- Power Measurement for Road Bicycles: Towards a Universal Solution (sequence unknown), IPRO 324 - Deliverables: IPRO 324 Midterm Presentation F09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available measuring systems are not very accurate.
Deliverables for IPRO 324: Power Measurement for Road Bicycles: Towards a Universal Solution for the fall 2009 semester
Show less
- Title
- Power Measurement for Road Bicycles: Toward a Universal Solution (Semester Unknown) IPRO 324: PowerMeasurementForRoadBicyclesIPRO324PosterF09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009, 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available IPRO 324 Project Plan Page: 4 measuring systems are not very accurate. In order to achieve our goals and to improve the current technology, our IPRO is divided into two groups: the mechanical and the electrical team.
Deliverables
Show less
- Title
- Power Measurement for Road Bicycles: Towards a Universal Solution (sequence unknown), IPRO 324 - Deliverables: IPRO 324 IPRO Day Presentation F09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available measuring systems are not very accurate.
Deliverables for IPRO 324: Power Measurement for Road Bicycles: Towards a Universal Solution for the fall 2009 semester
Show less
- Title
- Power Measurement for Road Bicycles: Toward a Universal Solution (Semester Unknown) IPRO 324
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009, 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available IPRO 324 Project Plan Page: 4 measuring systems are not very accurate. In order to achieve our goals and to improve the current technology, our IPRO is divided into two groups: the mechanical and the electrical team.
Deliverables
Show less
- Title
- Power Measurement for Road Bicycles: Toward a Universal Solution (Semester Unknown) IPRO 324: PowerMeasurementForRoadBicyclesIPRO324MidTermPresentationF09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009, 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available IPRO 324 Project Plan Page: 4 measuring systems are not very accurate. In order to achieve our goals and to improve the current technology, our IPRO is divided into two groups: the mechanical and the electrical team.
Deliverables
Show less
- Title
- Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309
- Creator
- Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
- Date
- 2008, 2008-05
- Description
-
There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less
- Title
- Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Educational and Technical Support of Orthotics and Prosthetics Education in Latin America and the US IPRO 309 Project Plan Sp08
- Creator
- Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
- Date
- 2008, 2008-05
- Description
-
There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less
- Title
- Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Educational and Technical Support of Orthotics and Prosthetics Education in Latin America and the US IPRO 309 Poster Sp08
- Creator
- Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
- Date
- 2008, 2008-05
- Description
-
There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less
- Title
- Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Educational and Technical Support of Orthotics and Prosthetics Education in Latin America and the US IPRO 309 MidTerm Report Sp08
- Creator
- Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
- Date
- 2008, 2008-05
- Description
-
There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less
- Title
- Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Educational and Technical Support of Orthotics and Prosthetics Education in Latin America and the US IPRO 309 Abstract Sp08
- Creator
- Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
- Date
- 2008, 2008-05
- Description
-
There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less
- Title
- Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Educational and Technical Support of Orthotics and Prosthetics Education in Latin America and the US IPRO 309 Final ReportSp08
- Creator
- Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
- Date
- 2008, 2008-05
- Description
-
There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less
- Title
- Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Educational and Technical Support of Orthotics and Prosthetics Education in Latin America and the US IPRO 309 Final Presentation Sp08
- Creator
- Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
- Date
- 2008, 2008-05
- Description
-
There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less
- Title
- Education and Technical Support of Prosthetics and Orthotics Education in Latin America (Semester Unknown) IPRO 309: Educational and Technical Support of Orthotics and Prosthetics Education in Latin America and the US IPRO 309 MidTerm ReportSp08
- Creator
- Allen, Ross, Barlow, Elliot, Benger, Lydia, Buntain, Seth, De Nicolo, Marisa, Larue, Robert, Moore, Emily, Quandt, Gregory, Rozborski, Stefanie, Selby, Heather
- Date
- 2008, 2008-05
- Description
-
There exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this...
Show moreThere exists a strong demand for orthotics and prosthetics (O & P) in Latin America, with approximately 2.5 million people in need of this type of care. IPRO 309 was started in the spring of 2006 with the goal of helping to make this type of care more readily available. However, there are only 50 certified, and 1500 uncertified, O & P practitioners in Latin America. In order to become a certified practitioner, a student must graduate from an ISPO accredited program. Unfortunately, there is currently only one ISPO accredited program in existence in Latin America, along with several other programs that are not ISPO accredited. In October of 2004, Centro Don Bosco (Bogotá, Colombia), Don Bosco University (San Salvador, El Salvador), and the Laboratorio Gilete (Bogotá, Colombia) signed an agreement to establish the first accredited O & P education program in Colombia. Since then, Centro Don Bosco has allotted 3,500 square feet of space for the thriving faculty, classrooms, manufacturing training, and vocational workspace that are necessary for an ISPO accredited program. There are three levels of accreditation according to ISPO standards. Category III involves the design and manufacturing of orthotic and prosthetic devices, Category II includes the fabrication of the devices as well as direct patient care, and Category I includes production, treatment for patients, and research and development. The equivalent to ISPO in the United States is the American Board of Certification in Orthotics and Prosthetics (ABC). Because it is independent from the ISPO, the ABC standards of accreditation will need to be taken into account in order to carefully cross cultural and national boundaries.
Deliverables
Show less