Search results
(1 - 20 of 35)
Pages
- Title
- Economic and Computational Methods for the Control of Uncertain Systems
- Creator
- Zhang, Jin
- Date
- 2019
- Description
-
The Economic Linear Optimal Control (ELOC) can improve the effective use of economic and dynamic information throughout the traditional...
Show moreThe Economic Linear Optimal Control (ELOC) can improve the effective use of economic and dynamic information throughout the traditional optimization and control hierarchy. This dissertation investigates the computational procedures used to obtain a global solution to the ELOC problem. The proposed method employs the Generalized Benders Decomposition (GBD) algorithm. Compared to the previous branch and bound approach, the application of GBD to the ELOC problem will greatly improve computational performance. A technological benefit of decomposing the problem into steady-state and dynamic parts is the ability to utilize nonlinear steady-state models, since the relaxed master problem is free of SDP type constraints and can be solved using any global nonlinear programming algorithm.In order to address the issue of model/plant mismatch, the dissertation will also investigate how to handle box-type uncertainties in ELOC. We consider two methods, a robust formulation for when the uncertainty is completely unknown and a Linear Parameter Varying formulation for when uncertainty can be measured in real time. In both cases, the infinite number of conditions that need to be satisfied are reduced to a finite set of constraints. The resulting problem formulations have a similar structure to the ELOC and can be solved globally by employing the generalized Benders decomposition.Despite a high-quality control law, the ultimate performance of closed-loop systems will be dictated by the quality and limitation of hardware element. Thus, hardware selection is also investigated in the dissertation. The cost-optimal hardware selection problem has been shown to be of the Mixed Integer Convex Programming (MICP) class. While such a formulation provides a route to global optimality, use of the branch and bound search procedure has limited application to fairly small systems. In this dissertation, we illustrate that a simple reformulation of the MICP and subsequent application of the GBD algorithm will result in massive reductions in computational effort.Finally, the problems of value-optimal sensor network design (SND) for steady-state and closed-loop systems are investigated. The value-optimal SND problem has been shown to be of the nonconvex mixed integer programming class. In the dissertation, it is demonstrated after transforming into an equivalent reformation, the application of GBD algorithm will significantly reduce the computational effort.
Show less
- Title
- DEEP LEARNING IN ENGINEERING MECHANICS: WAVE PROPAGATION AND DYNAMICS IMPLEMENTATIONS
- Creator
- Finol Berrueta, David
- Date
- 2019
- Description
-
With the advent of Artificial Intelligence research in the 1960s, the need for intelligent systems that are able to truly comprehend the...
Show moreWith the advent of Artificial Intelligence research in the 1960s, the need for intelligent systems that are able to truly comprehend the physical world around them became relevant. Significant milestones in the realm of machine learning and, in particular, deep learning during the past decade have led to advanced data-driven models that are able to approximate complex functions from pure observations. When it comes to the application of physics-based scenarios, the vast majority of these models rely on statistical and optimization constructs, leaving minimal room in their development for the physics-driven frameworks that more traditional engineering and science fields have been developing for centuries. On the other hand, the more traditional engineering fields, such as mechanics, have evolved on a different set of modeling tools that are mostly based on physics driven assumptions and equations, typically aided by statistical tools for uncertainty handling. Deep learning models can provide significant implementation advantages in commercial systems over traditional engineering modeling tools in the current economies of scale, but they tend to lack the strong reliability their counterparts naturally allow. The work presented in this thesis is aimed at assessing the potential of deep learning tools, such as Convolutional Neural Networks and Long Short-Term Memory Networks, as data-driven models in engineering mechanics, with a major focus on vibration problems. In particular, two implementation cases are presented: a data driven surrogate model to a Phononic eigenvalue problem, and a physics-learning model in rigid-body dynamics scenario. Through the applications presented, this work that shows select deep learning architectures can appropriately approximate complex functions found in engineering mechanics from a system’s time history or state and generalize to set expectations outside training domains. In spatio-temporal systems, it is also that shown local learning windows along space and time can provide improved model reliability in their approximation and generalization performance
Show less
- Title
- INTERACTIVE MULTIPLE MODEL ESTIMATION FOR UNMANNED AIRCRAFT SYSTEMS DETECT AND AVOID
- Creator
- Canolla, Adriano Carlos
- Date
- 2018
- Description
-
This research presents new methods to apply safety standards to Detect and Avoid (DAA) functions for Unmanned Aircraft Systems (UAS), using...
Show moreThis research presents new methods to apply safety standards to Detect and Avoid (DAA) functions for Unmanned Aircraft Systems (UAS), using maneuvering target tracking and encounter models.Previous DAA research methods focused on predefined, linear encounter generation. The new estimation and prediction methods in this research are based on the target tracking of maneuvering intruders using Multiple Model Adaptive Estimation and a realistic random encounter generation based on an established encounter model.When tracking maneuvering intruders there is limited knowledge of changes in intruder behavior beyond the current measurement. The standard Kalman filter (KF) with a single motion model is limited in performance for such problems due to ineffective responses as the target maneuvers. In these cases, state estimation can be improved using MMAE. It is assumed that the current active dynamic model is one of a discrete set of models, each of which is the basis for a separate filter. These filters run in parallel to estimate the states of targets with changing dynamics. In practical applications of multiple model systems, one of the most popular algorithms for the MMAE is the Interacting Multiple Model (IMM) estimator. In the IMM, the regime switching is modeled by a finite state homogeneous Markov Chain. This is represented by a transition probability matrix characterizing the mode transitions. A Markov Chain is a stochastic model describing a sequence of possible events in which the probability of each event depends only on the previous event.This research uses the hazard states estimates (which are derived from DAA standards) to analyze the IMM performance, and then presents a new method to predict the hazard states. To reduce the prediction error, this new method accounts for maneuvering intruders. The new prediction method uses the prediction phase in the IMM algorithm to predict the future intruder aircraft states based on the current and past sensor measurements. The estimation and prediction methods described in this thesis can help ensure safe encounters between UAS and manned aircraft in the National Airspace System through improvement of the trajectory estimation used to inform the DAA sensor certification process.
Show less
- Title
- AN EXPERIMENTAL INVESTIGATION OF THE DYNAMICS OF AN INVERTED SERRATED FLAG
- Creator
- MURUGESAN PAZHANI, KAUSHIK
- Date
- 2018
- Description
-
An experimental investigation of the role of leading-edge triangular serrations was conducted to understand the role of free leading edge in...
Show moreAn experimental investigation of the role of leading-edge triangular serrations was conducted to understand the role of free leading edge in large amplitude flapping of an inverted flag. The serrations are in the form of triangles arranged spanwise along the leading edge of the flag model. High – speed camera imaging experiment was conducted in open – loop wind tunnel at air – speeds ranging from 3.3m/s to 6.5m/s. For this velocity range, the non – dimensional bending stiffness (the ratio of bending force to the fluid inertial forces) ranges from 0.285 to 0.073. Flow visualization experiment using PIV technique was conducted for baseline flag and two serrated flags at flow velocity 4.8m/s (bending stiffness – 0.13). At a critical value of the velocity or bending stiffness, the flag oscillations transition from low amplitude asymmetric oscillations to symmetric high amplitude oscillations. This critical velocity is higher for the serrated flags indicating a reduction in the instantaneous lift force. The critical velocity was found to increase as serration height increased for a fixed number of serrations. The serrations create leading edge counter rotating eddy structures that interact with the primary tip vortex formation and breakdown process leading to changes in critical velocity, amplitude and frequency. The flapping amplitude and frequency were found to decrease as serration height increased for a fixed number of serrations. The “shallow” serrations have no effect of serrations while “tall” serrations decrease the non – dimensional flapping frequency and amplitude. The phase averaged velocity results show serrations delay leading edge vortex formations, and flow separation. This leads to decrease in pressure difference causing the serrated flag to deform less than baseline flag. Leading edge vortex formed in serrated flags were observed to be deformed compared to baseline flag leading edge vortex. Vortex deformation is due to serration induced three-dimensional flow effects. Serrated flags exhibit elongated vortical structures from flag tip instead of periodic vortex shedding in rebound phase. Streamlines used for qualitative analysis also shows, serrated flags lack periodic vortex formation and shedding during rebound phase. Using qualitative evidence from streamline plots and vorticity contour plots (elongated vortex structures) it could be stated due to change in leading edge geometry, serrated flags demonstrate a non – VIV flapping.
Show less
- Title
- Performance and NOx Emissions Control for Modern Diesel Engine and SCR Systems
- Creator
- Sui, Wenbo
- Date
- 2018
- Description
-
High combustion efficiency and low emissions output are two important targets for modern diesel engine system designs and for their control...
Show moreHigh combustion efficiency and low emissions output are two important targets for modern diesel engine system designs and for their control systems. In this work, different control strategies are investigated to improve the combustion efficiency of engines and to reduce the nitrogen oxide (NOx) emissions of vehicles.There are three main contributions of this work. First, to address emissions concerns, neural network based control algorithms were applied to selective catalyst reduction (SCR) systems. Compared with conventional model-based control, the control strategy based on neural networks can reduce the amount of time and cost required for model identification for these complex systems. The neural network controllers are developed and tested in simulations at different operating conditions for the Fe-zeolite SCR system first. In addition, methods for Jacobian information prediction are also discussed. According to the simulation results, the control strategy based on neural networks can track the desired reference and have reasonable NOx reduction efficiencies in most operating conditions. However, the NOx reduction efficiencies are poor at the low temperature situations in Fe-zeolite SCR systems. To improve this issue, the neural network control strategy was applied to a Cu-zeolite SCR and an improvement in the NOx reduction efficiencies was observed with reductions over 98% at different operating conditions. Second, to address efficiency concerns, a nonlinear model-based combustion control approach was investigated. This control approach aims to track a desired optimal combustion timing and leverages a combustion phasing model for a diesel engine that was developed and validated as part of this work. An intake gas properties model is also developed to capture the cylinder-to-cylinder difference of the temperature and pressure at intake valve closing (IVC). An adaptive controller and model-based controller were then designed for the diesel engine. These control strategies are evaluated in simulations and results show that the combustion phasing control system can track the optimal CA50 (crank angle at 50% mass of fuel burned). The combustion phasing control strategies were also expanded for use on dual-fuel compression ignition engines. The dual-fuel compression ignition engine is being considered as one of the candidates for the next generation of the modern diesel engines due to its ability to achieve high combustion efficiency and low emissions. To track the optimal combustion phasing in a dual-fuel engine, a non-linear combustion phasing model for this application was also developed and calibrated based on simulations. With the control-oriented model, controllers based on an adaptive control strategy and a feedforward control strategy are designed. The controllers are evaluated and shown to track the reference CA50s at varied operating conditions.
Show less
- Title
- A Novel Remote Sensing System Using Reflected GNSS Signals
- Creator
- Parvizi, Roohollah
- Date
- 2020
- Description
-
This dissertation presents a method to remotely sense freshwater surface ice and water using reflected signals from Global Navigation...
Show moreThis dissertation presents a method to remotely sense freshwater surface ice and water using reflected signals from Global Navigation Satellite Systems (GNSS). A portable ground-based sensor system is designed and built for collecting both scattered Global Positioning System (GPS) signals and independent validation data (lidar and camera) from the surface. GPS front-end signals are collected from both a direct receiving antenna facing upward and from a reflection-receiving antenna facing downward. Multiple data campaigns are conducted on the Lake Michigan waterfront in Chicago. A customized software receiver tests a new signal processing method to detect and acquire Global Navigation Satellite System (GNSS) signals reflected from the lake surface ice and collected by a downward-facing antenna. The method, modified differential coherent integration, multiplies time-shifted auto-correlation samples. The new method is evaluated against three conventional integration methods (coherent, incoherent, and differential integration) with signals from the direct antenna. With front-end samples from the reflection antenna, the new method is the only one of the four methods compared that acquires satellites in the reflected GPS signals, with three acquired using 10 ms of integration.The lidar surface scans are mapped with camera images and estimated reflection points to indicate the surface reflection type and to provide surface height relative to the sensors. For one satellite whose specular point is estimated to be on the ice surface, a Delay Doppler Map (DDM), signal-to-noise (SNR) ratio, and surface reflectivity (SR) are computed with the modified differential coherent integration method using the GPS. The DDM shows that, with modified differential integration, the satellite can be acquired in the reflected signal. For two satellites whose reflection points scan across ice and water over time the SNR and SR are computed over time. The SR is shown to be lower for liquid water than lake ice. This system concept may be used in the future for more complete mapping of phase changes in the cryosphere.
Show less
- Title
- COMPUTATIONAL MODELLING OF FALLING FILM FLOW AND HEAT TRANSFER OVER HORIZONTAL TUBES
- Creator
- Karmakar, Avijit
- Date
- 2021
- Description
-
In this study, numerical simulations based on the volume of fluid (VOF) method are conducted to investigate the hydrodynamic behavior,...
Show moreIn this study, numerical simulations based on the volume of fluid (VOF) method are conducted to investigate the hydrodynamic behavior, sensible heat transfer behavior, and tube surface wettability effects for a falling film over heated horizontal tubes encountered in falling film heat exchangers. The Reynolds number ranges from 15 - 210, covering the droplet, jet (inline and staggered), and sheet flow modes. To consider evaporation under liquid film waviness and gas (vapor and air) flow effects, a simplified case was studied for the wavy liquid film over a heated vertical surface with the surrounding gas flowing in either co-current or counter-current direction. The OpenFOAM CFD solver has been used to conduct the numerical simulations.For hydrodynamics, the liquid film thickness and interface velocity variation for all the flow modes are presented. In droplet mode, the movement of the liquid waves formed by the drop impact causes an over 350% change in film thickness. A dimple around the jet impingement region in the steady inline jet mode is formed with a relative change in film thickness by 40%. The base of the impinging jets possess ripples of wavelengths 0.3-1.0 times the capillary length. For the steady staggered jet mode, the neighboring jets interact to develop crest and stable segments with film thickness ratio of 1.7. Finally, for the sheet mode, interfacial waves are seen to travel along the tube periphery with amplitudes of about 20% of the nominal film thickness. A set of correlations have been presented to predict film thickness and interfacial velocity with RMSE = 0.2 for 80% of the data.The local Nusselt number (Nu) distribution depends on the flow features in each mode. In the droplet mode, the Nu value varies significantly as the droplet impinges and the remnant liquid-bridge retracts (peak instantaneous Nu = 6), followed by wave propagation with peak Nu = 0.25. For the jet modes, the local maximum in Nu occurs off-center to the impingement location with peak Nu = 3.1 for the inline jet mode and Nu = 2.7 for the staggered jet mode, while for other locations, Nu varies as inversely proportional to film thickness. Substantial variations in the Nu value are also recorded in the middle of the two impinging jets with Nu = 0.95 in the inline jet mode, and Nu = 0.60 in the crest region of the staggered jet mode. In the sheet mode, the Nu varies with the thickness of the traversing liquid waves. Lower Nu values were recorded beneath the crest location of the liquid waves, which increases (1.4 - 11.6%) abruptly at the advancing fronts of the waves. The temperature distribution in the liquid film in each of the modes was examined to evaluate the mechanism of heat transfer process. This study also compares the Nu distribution with the available analytical heat transfer models.The tube surface wettability results present the liquid film thickness, the wetted areas, and the Nusselt number (Nu) over the tube surface. The resistance imposed by the increasing contact angles inhibits the extent of the liquid spreading over the tube surface, and this, in turn, influences film thickness and wetted areas. A significant decrement in the heat transfer rate from the tube surfaces was observed as the equilibrium contact angle increased from 2 to 175 degrees. The local distributions of the Nu over the tube surface are strongly influenced by the flow recirculation in the liquid bulk.Finally, for wavy film evaporation under gas flow effects, the results show a 15% and 16% enhancement in time-averaged Sherwood number (Sh) due to film waviness (sinusoidal and solitary) with gas flow rate, Qg = +50 and Qg = -50, respectively. This enhancement in the Sh for both the waves further increases by 11% with Qg =+800 and by 196% with Qg = -800. Closer examination of the mass transfer process over a wave demonstrates that with Qg = +50, the concentration of the gas side streamlines at the trough locations of the wave leads to higher values of Sh than the rest of the locations. However, with Qg = +800, although the overall Sh increases, vortices appear at the wave trough locations, leading to decreased local Sh values than the surrounding locations.
Show less
- Title
- MODELING AND CONTROL OF A GASOLINE-FUELED COMPRESSION IGNITION ENGINE
- Creator
- Pamminger, Michael
- Date
- 2021
- Description
-
This work investigates a novel combustion concept, Gasoline Compression Ignition, that derives its superiority from the high compression ratio...
Show moreThis work investigates a novel combustion concept, Gasoline Compression Ignition, that derives its superiority from the high compression ratio of a compression ignition engine as well as the properties of gasoline fuel, such as longer ignition delay and higher volatility compared to diesel fuel. Gasoline Compression Ignition was experimentally tested on a 12.4L truck engine and the acquired data were leveraged to develop a physics-based 0-dimensional combustion model for an engine operating with a low-reactivity fuel. The proposed 0-dimensional combustion model was developed to account for the different stages in combustion caused by the fuel stratification of various injection events and fuel mass fractions. As the ignition delay model is an integral part of the entire combustion process and significantly affects the predictionaccuracy, special attention was paid to local phenomena influencing ignition delay. A 1-dimensional spray model by Musculus and Kattke was employed in conjunction with a Lagrangian tracking approach in order to estimate the local fuel-air ratio within the spray tip, as a proxy for reactivity. The local fuel-air ratio, in-cylinder temperature and pressure were used in an integral fashion to estimate the ignition delay. Heat release rates were modeled by using first-order non-linear differential equations. Model prediction errors in combustion phasing of less than 1 crank angle degree across most conditions were achieved. Modeling results of other combustion metrics such as combustion duration and indicated mean effective pressure are also suitably accurate. Also, the model has been shown to be capable of estimating the ringing intensity for most conditions. While the performance of the proposed model was very satisfactory, the high computational time made it unsuitable for simulations. The high computational cost was mostly caused by the 1-dimensional spray model which described the fuelstratifcation in the spray tip as a function of crank angle for multiple injection events. Insights obtained from the 1-dimensional spray model were leveraged and applied to a 0-dimensional model to reduce the computation time. With the reduced order model, the simulation time decreased by three orders of magnitude for an entire engine cycle over the combustion model with the 1-dimensional spray model. Capturing only the basic features of the spray propagation did not show a substantial increase in prediction error compared to the initially proposed model. In order for this model to reflect a virtual engine, the influence of changes in actuator settings on intake manifold dynamics was modeled with first-order transfer functions. The intake manifold dynamics in turn influence intake valve closure conditions and further the entire combustion process. The proposed model provides information about in-cylinder metrics such as combustion phasing and indicated mean effective pressure. By taking into account the losses due to gas-exchange and friction, the brake mean effective pressure was modeled. The model was also augmented to capture cycle-to-cycle variations, thereby ensuring a faithful representation of real engine behavior. The Gasoline Compression Ignition combustion model, the intake dynamics and gas-exchange and friction model as well as the cycle-to-cycle variations model were combined to create a full engine model. This Gasoline Compression Ignition engine model was used as the plant in a control system and implemented in Matlab/Simulink.The Gasoline Compression Ignition engine model was then leveraged to investigate control actions and engine behavior with and without limiting in-cylinder peak pressure as well as combustion noise. Controlling combustion noise is of particular interest for injection strategies where fuel introduction happens early in the cycle. State estimation was performed by means of a Kalman filter which feeds into a model predictive controller. The model predictive controller chooses control actions based on a predefined cost function under consideration of bounds reflecting physical constraints. The Gasoline Compression Ignition engine model was also utilized to establish a state-space model that serves the Kalman filter and model predictive controller for estimation and prediction. In addition, the proposed control architecture was investigated at two different levels of cycle-to-cycle variations. Disturbance rejection was implemented to reduce state fluctuations and control efforts when high cycle-to-cycle variations are present. The control algorithm is able to maintain the desired references for brake mean effective pressure and combustion phasing while controlling peak in-cylinder pressure and combustion noise.
Show less
- Title
- ELECTROCHEMICAL BEHAVIOR OF ADDITIVELY MANUFACTURED NON-SPHERICAL TI-6AL-4V POWDER IN 3.5 WT. % NACL SOLUTION
- Creator
- Bagi, Sourabh Dilip
- Date
- 2021
- Description
-
In laser powder bed fusion (LPBF), also known as selective laser melting (SLM), the feedstock powder and processing parameters affect the...
Show moreIn laser powder bed fusion (LPBF), also known as selective laser melting (SLM), the feedstock powder and processing parameters affect the properties of additively manufactured parts. Limited research has been conducted on non-spherical Ti6Al4V feedstock powder prepared by Hydride-Dehydride process. Significant progress in metal powder additive manufacturing (AM) requires the inter-linking of multiple variables, which includes starting materials, process settings, and post-treatment to achieve desired resultant properties. Owing to the rapid emergence of metal 3D-printing, process-property relationships, and appropriate post-treatment conditions have not been as extensively characterized as for conventional materials, thus requiring significant attention. Over the years, spherical powders were used in powder bed AM machines and there have been various concerns related to powder as well as processing parameters leading to defects formation, poor part quality, and unsatisfactory performance. It is critical to keep the cost of manufacturing low for large-scale production which results in significant interest in low-cost powder, making it vital to understand the effect of microstructural defects on corrosion behavior. Recently, economical powder attracted attention in AM, thus, making it is necessary to understand the role of possible microstructural defects on corrosion behavior. In powder bed additive manufacturing, feedstock and processing affect final microstructure and properties of the 3D printed parts. While numerous studies have evaluated 3D-printing of spherical powder, very limited research has examined the processing of the non-spherical feedstock. In this research, parts are manufactured by SLM of hydride-dehydride (HDH) Ti6Al4V powder. heat treatment and hot isostatic pressing are applied on SLM parts. The microstructures, potentiodynamic curves, and electrochemical impedance spectroscopy are characterized for SLM processed, heat treated, and hot isostatically pressed HDH Ti6Al4V specimens. Results indicate although the as-built specimen has anisotropic microstructure (i.e., lamellar α + acicular α’ + β phases), the heat treatment and hot isostatic pressing result in homogenized grain structures and enhanced corrosion behavior. Results indicate that type of constituent phase, grain size, and morphology directly determine corrosion resistance. This research is beneficial for the manufacturing of low-cost titanium alloys. In the current research, we evaluate non-spherical powder processing by hydride-dehydride (HDH) method and selective laser melted in powder bed AM machine followed by heat treatment and hot isostatic pressing to alter microstructure and electrochemical behavior. If successful, the usage of non-spherical morphology in conjunction with the newer powder dispensing method of double smoothing will enable remarkable improvements in the quality and performance of additively manufactured products. This method will also cut down costs associated with a greener powder production method and enhance the fabrication rate. It is a well-established fact that corrosion behavior is drastically affected by heterogeneous microstructure and defects. Thus, it is paramount to conduct a systematic study on the role of processing parameters and post process heat treatment, which can enhance our understanding of possible defect formation in micro and macro scale and their impact on electrochemical behavior.
Show less
- Title
- Modeling the Aerodynamic Response to Impulsive Active Flow Control
- Creator
- Asztalos, Katherine
- Date
- 2021
- Description
-
In unsteady aerodynamics the response to external disturbances can depend significantly on the initial condition, and the extent to which this...
Show moreIn unsteady aerodynamics the response to external disturbances can depend significantly on the initial condition, and the extent to which this impacts the ability to model the flowfield can vary. In this work, we look to develop a model that can capture and predict the long-time response to actuation, which we suspect to be sensitive to the instantaneous state. We investigate whether a physical understanding of the short-time response to impulsive actuation can be obtained, with the goal of understanding the observed physical phenomenon present in the immediate response to this type of actuation. We find that the response to impulsive actuation is sensitive to the instantaneous wake, and that the short-time response is directly proportional to the time rate of change of the actuation input. Computational simulations of a stalled NACA 0009 airfoil subject to leading-edge synthetic jet actuation were performed. Full state information, as well as force response measurements, were collected using an immersed boundary method (IBM) numerical code. The numerical simulations performed sought to characterize the response to actuation by varying the actuation parameters, such as the strength, direction, and phase at which the onset of actuation occurs. It was found that the long-time response to actuation can be sensitive to the instantaneous wake state at the onset of actuation. The ability to extract models that describe the complex behavior of the system provides additional insight into the dominant features governing the response of such systems, as well as achieves predictive capabilities of the systems' response. The data-driven models, which are identified using variants of dynamic mode decomposition, can capture both the short- and long-time response of the system to actuation. Predictive models are identified using multiple trajectories of data corresponding to varying the phase of vortex shedding at which the onset of actuation occurs. These models achieve accurate predictions for off-design cases as well. It is also shown that multiple control objectives with the same actuator can be achieved. Classical theory aids in understanding the physics governing unsteady aerodynamic motion and the response to disturbances. Theoretical models are developed using the assumptions from classical unsteady aerodynamic theory, which provide insight into the forms that the data-driven models take. The effect of short-duration momentum injection actuation is modeled through a combination of source/sink, doublet, and vortex elements. Regardless of the precise elements used in the theoretical model, the lift response is composed of a contribution directly proportional to the rate of change of actuation strength, and a contribution that persists after the actuation burst ends that arises due to the enforcement of the Kutta condition. Methodologies that retain the physics inherent to the system by projecting the governing equations of motion onto a well-suited basis are extremely valuable for gaining physical insight and understanding into the dynamics of the flowfield. A new methodology is proposed for extracting spectral content from systems with limited data available using projection-based modeling approaches. There are challenges associated with using modal decomposition-based modeling techniques for systems exhibiting large transient dynamics due to external inputs, which is applicable in this particular instance and for related systems. The methodology presented here shows how the dynamics of this system can be understood through analysis of optimal finite-time horizon transient energy growth, applied to reduced-order models identified using actuation response data with either data-driven or physics-based models. A novel methodology is proposed to guide future experimental actuation design to achieve maximal response by considering an optimal forcing mode, identified from considering the optimal perturbation of the full unactuated system, which maximizes a given output.
Show less
- Title
- Computationally Efficient Predictive Control Strategies for Autonomous Vehicles
- Creator
- Bhattacharyya, Viranjan
- Date
- 2021
- Description
-
This thesis aims at developing computationally efficient (hence real-time applicable) control strategies for autonomous vehicles in the...
Show moreThis thesis aims at developing computationally efficient (hence real-time applicable) control strategies for autonomous vehicles in the presence of uncertainty, while incorporating high fidelity vehicle dynamics. The motivation for the control strategies is to ensure safety and improve energy efficiency of the vehicles. In this research, an effort has been made to develop control strategies to strike a balance between these competing factors. The specific contributions are: development of a new hierarchical control framework that can guarantee avoidance of red-light idling in the presence of uncertainty in preceding vehicle information/prediction in connected environment (hence improves system mobility); exploitation of a data-driven modeling approach for identifying a linear predictor for the nonlinear vehicle dynamics, which facilitates formulation of a convex equivalent problem of the original non-convex problem (hence facilitates computational tractability); introduction of a novel vehicle dynamics-aware fast game-theoretic planner for behavior and motion planning of vehicles in uncertain and unconnected environments. This thesis explores both the possible directions of future autonomous vehicles: connected and unconnected autonomous vehicles. In particular, the first problem relates to longitudinal fuel efficient driving (eco-driving) in a connected urban environment, where the connected and automated vehicles (CAVs) aim at the improvement of fuel efficiency and reduction of red-light idling (stop and go motion). The CAVs also focus on ensuring collision avoidance with the preceding vehicles despite the prediction uncertainty in future trajectory of preceding vehicles. This problem assumes vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication, and is a longitudinal control problem. The next problem considers the uncertainty in prediction of future states of neighbouring vehicles in an unconnected environment and involves both lateral and longitudinal control. Following previous research, the interactive nature of driving is modeled using game-theory and a computationally efficient game-theoretic planner is introduced. Simulation results show the efficacy of the proposed methods in terms of computational tractability and fuel-efficiency.
Show less
- Title
- Modeling and Control Methods for Boundary Constrained Soft Robots
- Creator
- Zhou, Qiyuan
- Date
- 2021
- Description
-
Soft and deformable robots have been an active field of research in the past few years. However, they are limited in that they cannot apply...
Show moreSoft and deformable robots have been an active field of research in the past few years. However, they are limited in that they cannot apply much force to an environment due to the limitations of the flexible materials from which they are made of. To help overcome this limitation, a new architecture named the Jamming and Morphing Enabled Bot Array (JAMoEBA) system was conceived. This system consists of a flexible outer membrane which encloses an interior composed of a granular medium. Active sub-units along the flexible outer membrane allow for actuation and locomotion of the system. The granular material coupled with the flexible outer membrane allows the robot to maintain the characteristics typically associated with soft robots (continuum, compliant, configurable). At the same time, the granular material is also able to undergo a solid phase transition with the application of pressure to the flexible outer membrane and allow the system to behave more like a rigid robot if needed. This allows for the robot system to exploit the desirable characteristics of both soft and rigid robots in its tasks.The purpose of this thesis is to offer a discussion and demonstration of various simulation methods for the physically accurate modeling of the JAMoEBA constrained boundary robotic system and to show some of the control methods which have been investigated within the selected modeling framework. Simulation methods based on Lennard-Jones (L-J) potentials, non-smooth contact dynamics (NSCD), as well as the discrete element methods based on complementarity (DEM-C) and penalty (DEM-P) conditions as implemented in the open source physics library Project Chrono are considered. Comparisons are made in the areas of physical accuracy, computational efficiency, and feature availability in the consideration of the best simulation method for the JAMoEBA system. Investigations of control strategies such as leader-follower and heuristics based approaches are carried out using the selected simulation method. Finally, a framework for self contained localization which relies on measurements from onboard sensors and linear Kalman filtering is tested within the simulation framework, and the effectiveness of approximating the shape of the JAMoEBA system using elliptical Fourier descriptors is shown.The main contributions made in this thesis are in the areas of suitable modeling methods, controls strategies, and localization techniques for the novel boundary constrained JAMoEBA soft robot architecture. The work done serves as a solid foundation for the future study of this novel soft robotic architecture due to the demonstration of successful methods for modeling, control, and localization of the system. The work presented is not meant to be a comprehensive or deep dive into any one specific area, but rather a jumping off point for future areas of research.
Show less
- Title
- DUST MITIGATION OF MICRO-STRUCTURED (GECKO-LIKE) ADHESIVES
- Creator
- Alizadehyazdi, Vahid
- Date
- 2019
- Description
-
Controllable adhesives (i.e. those capable of being turned on and off) are used in a wide range of applications including robotic grippers and...
Show moreControllable adhesives (i.e. those capable of being turned on and off) are used in a wide range of applications including robotic grippers and climbing robots. Electromagnets, suction, and microspines have been used to meet this demand, but are typically limited to a specific substrate roughness or material. Microstructured (gecko-like) adhesives on the other hand, offer the potential to be the most universal among controllable adhesives since they can work on a wide variety of surfaces. The development of microstructured (gecko-like) adhesives has focused almost solely on their adhesive strength. However, for practical applications, especially in real-world environments, the adhesive's long-term performance is arguably equally important. One impediment to long-term viability is the adhesive's susceptibility to contamination, which decreases adhesion significantly. To have practical microstructure adhesives in real-world environments, the detrimental effect of dust and other contaminants should be dealt with. The first general approach involves removing adhered dust particles. The second approach is to create adhesives that minimize dust adsorption such that extensive cleaning is not necessary or they can be removed easily. Regarding the first approach, this research describes the use of electrostatic forces and ultrasonic vibration to repel dust particles. Results are non-destructive, non-contact cleaning methods that can be used in conjunction with other cleaning techniques, many of which rely on physical contact between the fibrillar adhesive and substrate. Electrostatic cleaning results show that a two-phase square wave with the lowest practically feasible frequency has the best cleaning results. Combining electrostatic and ultrasonic cleaning results in far higher efficiency than when using electrostatic repulsion or ultrasonic alone. Moreover, I showed that the piezoelectric element in the ultrasonic cleaning method can also be used as a releasing mechanism to turn the adhesive off and as a force/contact sensor. Regarding the second approach, I experimentally explored the effect of the modulus of elasticity, work of separation, and work of adhesion (adhesion energy) on the shear stress and particle detachment capabilities of microstructured adhesives. Particle removal is evaluated using both non-contact cleaning methods (centripetal force and electrostatic particle repulsion) and a dry contact cleaning method (load-drag-unload test). Results show that for a material with a high work of separation, high elastic modulus, and low work of adhesion, it is possible to create a microstructured adhesive with both high shear stress strength and low adhesion to dust particles. Results also show that, for dry contact cleaning, shear stress recovery mostly stems from particle rolling and not particle sliding. Moreover, shear test results show that augmenting the microstructured adhesive with electrostatic adhesion can reduce the negative effects on adhesion of a high elastic modulus materials' conformability to a substrate by providing a preload to the microstructured elements. Finally, I applied mentioned dust mitigation methods on two different gecko-like adhesives grippers. The first design was used to pick up flat objects, while the second one is designed to grip curved objects of different shapes and sizes. Since the second gripper is flexible and piezoelectric is stiff (it can only be applied to rigid backings), only electrostatic dust mitigation is applicable.
Show less
- Title
- Quantifying Localization Safety for State-of-the-Art Mobile Robot Estimation Algorithms
- Creator
- Abdul Hafez, Osama Mutie Fahad
- Date
- 2023
- Description
-
In mobile robotics, localization safety is quantified using covariance matrix or particle spread.However, such methods are insufficient for...
Show moreIn mobile robotics, localization safety is quantified using covariance matrix or particle spread.However, such methods are insufficient for mission or life-critical applications, like Autonomous Vehicles (AVs), because they only reflect nominal sensor noise without considering sensor measurement faults. Sensor faults are unknown deterministic errors that cannot be modeled using a zero mean Gaussian distribution. Ignoring sensor faults, in such applications, might result in large localization errors, which in turn deceives other reliant systems, like the controller, leading to catastrophic consequences, such as traffic accidents for AVs. Thus, other techniques need to be used to conservatively quantify pose safety.This thesis builds upon previous research in aviation safety, or what is referred to as \textit{integrity monitoring}, to quantify localization safety for mobile robots that use state-of-the-art state estimators (as localizers).Specifically, this thesis utilizes the localization \textit{integrity risk} metric, as a measure of localization safety, which is defined as the probability of the robot's pose estimate error to lie outside pre-determined acceptable limits while an alarm is not triggered. Unlike open-sky aviation applications, where Global Navigation Satellite Systems (GNSS) signals are available, mobile robots operate in GNSS-denied, or in the best case GNSS-degraded, environments, which demands utilizing more complex set of sensors to guarantee an acceptable level of localization safety. This thesis provides a conservative measure of localization safety by rigorously upper-bounding the integrity risk while accounting for both nominal lidar noise and unmodeled lidar measurement faults.The contributions of this thesis include the design and analysis of practical integrity monitoring and failure detection procedures for mobile robots utilizing map-based particle filtering, a recursive integrity monitoring method for mobile robots utilizing map-based fixed lag smoothing for both solution-separation and chi-squared as failure detectors, the synthesis of an integrity monitoring procedure for mobile robots utilizing Extended Kalman Filter-based Simultaneous Localization And Mapping (EKF-based SLAM), and a Model Predictive Control (MPC) framework that is capable of planning mobile robot's trajectory to follow a predefined robot path while maintaining a predefined minimum level of mobile robot localization safety. The proposed methodologies are validated using both simulation and experimental results conducted in real-world urban university campus environments.
Show less
- Title
- Modeling and Optimization of Power Plant Cooling Tower Systems Using Physics-Based and Neural-Network-Based Models
- Creator
- Salomon, Basile Clément Paul
- Date
- 2023
- Description
-
Condensers and cooling towers are commonly used in steam power plants to condense the steam exiting the turbine and to recycle the condensed...
Show moreCondensers and cooling towers are commonly used in steam power plants to condense the steam exiting the turbine and to recycle the condensed-water into the boiler in a closed-loop system. These condensers typically use cooling water drawn from a water body (lake, river etc) to condense the steam. Cooling towers are used to lower the temperature of the warm water exiting the condenser. Since the steam condensation temperature plays an important role in the power plant efficiency, cool- ing tower performance which is limited by the wet-bulb temperature of the ambient air has been extensively studied. This work investigates the modeling of an enhanced cooling tower technology using a new pre-cooling and dehumidifying system (PDHS). This new system, based on a reversed Brayton cycle, is made out of a compressor, an air-cooled heat exchanger (HX), a heat and mass exchanger (HMX) and an expander. The goal of this PDHS concept is to pre-cool the air entering the cooling tower in order to improve its performance. In this work, a systems model has been developed. Thermodynamic models have been used for the compressor, the air-cooled heat exchanger and the expander. For the remaining components, i.e. the heat and mass exchanger, the cooling tower and the condenser, physics-based models have been developed and tested. Once tested and validated, each model can be integrated into the integrated PDHS-cooling tower-condenser system. Two different configurations of the PDHS have been considered in this thesis. In the open water loop configuration, the water in the HMX is obtained from the municipal water supply (or an alternate water source) and is released back to the source after exiting the HMX. In the closed water loop configuration, the water used to cool down the air in the HMX is being recirculated and cooled in the power plant cooling tower. The physics-based model of the PDHS developed in this work has been validated using results from an empirical model of the PDHS by GTI Energy. This first case study also shows how the PDHS can be used to save water in the cooling tower (CT). Indeed, when using the PDHS, a 37% reduction in the cooling tower evaporation rate can be observed when comparing to the baseline. This decrease in the CT evaporation rate is the main source of make-up water savings. Moreover, the water harvested by condensation in the PDHS can be redirected towards the CT, bringing another source of water savings. These two combined lead to an overall 46% decrease of the make-up water usage in the cooling tower. Another case study has been conducted on a 500 MW condenser unit. It shows that, under summer ambient conditions i.e. Ta,db = 35°C and φ = 47%, the PDHS can help the condenser restore its designed cooling load of 453 MW. Finally, using the physics-based model to create a dataset, an artificial neural network model of the PDHS has been developed to constitute a black box for the PDHS that would be able to predict with sufficient accuracy the condenser and HMX loads, the air conditions at the inlet of the CT and water temperature at both ends of the condenser and CT given the ambient air condition, the compressor pressure ratio and the water split between the condenser and the heat and mass exchanger.
Show less
- Title
- Design and Fabrication of Battery-Operated Radiator Control (BORC) Utilizing 3D Printing Strategies
- Creator
- Riley, Christopher W.
- Date
- 2023
- Description
-
The scope of this work aims to serve as a continuation of prior research focused on the “development and evaluation of an automatic steam...
Show moreThe scope of this work aims to serve as a continuation of prior research focused on the “development and evaluation of an automatic steam radiator control system or retrofitting legacy heating systems in existing buildings” (Syed Ali et al., 2020) by describing and testing the mechanical components of the developed controller in full detail. Other aspects of radiator efficiency are also explored. Primarily, this work aims to elaborate on the importance of material selection and mechanical properties of the design process. It also proposes initiative-taking solutions for the building’s energy recovery by monitoring the initial set up and focusing on certain details such as cardinal direction, thermal breaks, etc. These legacy systems are generally problematic when attempting to calculate energy efficiency, as a majority of radiator controls tend to be manual. Though there are comparable products within the European market, they cater to hot water systems and not steam, and in some instances require an internet bridge for operation (Tahersima et al., 2010). Since this is an extension of our earlier project, I will refer to it as Battery Operated Radiator Control (BORC) and the previous version as BERG’s Automated Radiator Control (ARC).
Show less
- Title
- Deep Learning and Model Predictive Methods for the Control of Fuel-Flexible Compression Ignition Engines
- Creator
- Peng, Qian
- Date
- 2022
- Description
-
Compression ignited diesel engines are widely used for transportation and power generation because of their high fuel efficiency. However,...
Show moreCompression ignited diesel engines are widely used for transportation and power generation because of their high fuel efficiency. However, diesel engines can cause concerning environmental pollution because of their high nitrogen oxide (NOx) and soot emissions. In addition to meeting the stringent emission regulations, the demand to reduce greenhouse gas emissions has become urgent due to the more frequent destructive catastrophes caused by global warming in recent decades. In an effort to reduce emissions and improve fuel economy, many techniques have been developed and investigated by researchers. Air handling systems like exhaust gas recirculation and variable geometry turbochargers are the most widely used techniques on the market for modern diesel engines. Meanwhile, the concept of low temperature combustion is widely investigated by researchers. Low temperature combustion can increase the portion of pre-mixed fuel-air combustion to reduce the peak in-cylinder temperature so that the formation of NOx can be suppressed. Furthermore, the combustion characteristics and performance of bio-derived fuel blends are also studied to reduce overall greenhouse gas emissions through the reduced usage of fossil fuels. All the above mentioned systems are complicated because they involve not only chemical reactions but also complex fluid motion and mixing processes. As such, the control of these systems is always challenging and limits their commercial application. Currentlymost control methods are feed-forward control based on load condition and engine speed due to the simplicity in real-time application. With the development of faster control unit and deep learning techniques, the application of more complex control algorithms is possible to further improve the emissions and fuel economy. This work focuses on improvements to the control of engine air handling systems and combustion processes that leverage alternative fuels.Complex air handling systems, featuring technologies such as exhaust gas recirculation (EGR) and variable geometry turbochargers (VGTs), are commonly used in modern diesel engines to meet stringent emissions and fuel economy requirements. The control of diesel air handling systems with EGR and VGTs is challenging because of their nonlinearity and coupled dynamics. In this thesis, artificial neural networks (ANNs) and recurrent neural networks (RNNs) are applied to control the low pressure (LP) EGR valve position and VGT vane position simultaneously on a light-duty multi-cylinder diesel engine. In addition, experimental examination of a low temperature combustion based on gasoline compression ignition as well as its control has also been studied in this work. This type of combustion has been explored on traditional diesel engines in order to meet increasingly stringent emission regulations without sacrificing efficiency. In this study, a six-cylinder heavy-duty diesel engine was operated in a mixing controlled gasoline compression ignition mode to investigatethe influence of fuels and injection strategies on the combustion characteristics, emissions, and thermal efficiencies. Fuels, including ethanol (E), isobutanol (IB), and diisobutylene (DIB), were blended with a gasoline fuel to form E10, E30, IB30, and DIB30 based on volumetric fraction. These four blends along with gasoline formed the five test fuels. With these fuels, three injections strategies were investigated, including late pilot injection, early pilot injection, and port fuel injection/direct injection. The impact of moderate exhaust gas recirculation on nitrogen oxides and soot emissions was examined to determine the most promising fuel/injection strategy for emissions reduction. In addition, first and second law analyses were performed to provide insights into the efficiency, loss, and exergy destruction of the various gasoline fuel blends at low and medium load conditions. Overall, the emission output, thermal efficiency, and combustion performances of the five fuels were found to be similar and their differences are modest under most test conditions.While experimental work showed that low temperature combustion with alternative fuels could be effective, control is still challenging due to not only the properties of different gasoline-type fuels but also the impacts of injection strategies on the in-cylinder reactivity. As such, a computationally efficient zero-dimension combustion model can significantly reduce the cost of control development. In this study, a previously developed zero-dimension combustion model for gasoline compression ignition was extended to multiple gasoline-type fuel blends and a port fuel injection/direct fuel injection strategy. Tests were conducted on a 12.4-liter heavy-duty engine with five fuel blends. A modification was made to the functional ignition delay model to cover the significantly different ignition delay behavior between conventional and oxygenated fuel blends. The parameters in the model were calibrated with only gasoline data at a load of 14 bar brake mean effective pressure. The results showed that this physics-based model can be applied to the other four fuel blends at three differentpilot injection strategies without recalibration. In order to also facilitate the control of emissions, machine learning models were investigated to capture NOx emissions. A kernel-based extreme learning machine (K-ELM) performed best and had a coefficient of correlation (R-squared) of 0.998. The combustion and NOx emission models are valid for not only conventional gasoline fuel but also oxygenated alternative fuel blends at three different pilot injection strategies. In order to track key combustion metrics while keeping noise and emissions within constraints, a model predictive control(MPC) was applied for a compression ignition engine operating with a range of potential fuels and fuel injection strategies. The MPC is validated under different scenarios, including a load step change, fuel type change, and injection strategy change, with proportional-integral (PI) control as the baseline. The simulation results show that MPC can optimize the overall performance through modifying the main injection timing, pilot fuel mass, and exhaust gas recirculation (EGR) fraction.
Show less
- Title
- Self-Reconfigurable Soft Robots Based on Boundary-Constrained Granular Swarms
- Creator
- Karimi, Mohammad Amin
- Date
- 2022
- Description
-
Unlike conventional robots, which consist of rigid bodies and linkages, soft robots are composed of compliant and flexible components and...
Show moreUnlike conventional robots, which consist of rigid bodies and linkages, soft robots are composed of compliant and flexible components and actuators. This distinction enables adaptive behaviors in response to unpredictable environments, like manipulating objects with a variety of shapes. As such, soft robots afford greater potential over traditional robots for safe human interaction.Despite these advantages, there remain obstacles due to the challenges in modeling, controlling, and fabricating soft materials. For example, soft robots that rely on thermal or electrical actuation are typically slow to respond and unable to apply large forces as compared to traditional robots. Pneumatically actuated soft robots, while more responsive and capable of applying larger forces, generally need to be tethered to external control mechanisms, which becomes limiting in tasks that require lightweight, autonomous functionality.In contrast, this thesis describes a new type of robot that exhibits those same characteristics, but achieves them via a boundary-constrained swarm.The robotic structure consists of passive granular material surrounded by an active membrane that is composed of a swarm of interconnected robotic sub-units. The internal components are important for overall function, but their relative configuration is not. This allows for an effectively random, unstructured placement of the internal components, which in turn creates excellent morphability. Collectively, the subunits determine the overall shape of the robot and enable locomotion through interaction with external surfaces.The constrained swarm embodies the continuum, compliant, and configurable properties found in soft robots, but in this state the robot is limited in its ability to manipulate objects due to the relatively low force it can apply to external objects.To address this issue, the unique ability to execute a jamming phase transition is added to the robot. Importantly, jamming is controlled by the degree by which the passive particles are spatially confined by the membrane, and this in turn is controlled by the active sub-unit robots using different jamming mechanisms. The robot exploits its ability to transition between soft (unjammed) and rigid (jammed) states to induce fluid-like flexibility or solid-like rigidity in response to objects and features in the environment.In order to investigate this design concept, I have studied different prototype designs for the robot that varied in terms of the locomotion and jamming mechanisms. I also present a simulation framework in which I model the design and study the scalability of this class of robots. The simulation framework uses the Project Chrono platform, which is a multi-body dynamics library that allows for physics-driven collision and contact modeling.
Show less
- Title
- Predictive Energy Management of Connected Hybrid Electric Vehicles in the Presence of Uncertainty
- Creator
- Sotoudeh, Seyedeh Mahsa
- Date
- 2022
- Description
-
Energy efficiency improvements brought by electrification of the powertrain in Hybrid Electric Vehicles (HEVs) highly depend on their...
Show moreEnergy efficiency improvements brought by electrification of the powertrain in Hybrid Electric Vehicles (HEVs) highly depend on their powertrain Energy Management Strategy (EMS) that determines optimal power allocation between powertrain components.Eco-driving based EMS seeks further energy efficiency improvements through optimizing vehicle's driving cycle (velocity and hence torque demand), in addition to the powertrain's EMS. A novel hierarchical EMS is developed in this thesis for connected human-driven HEVs and then extended to automated HEVs that effectively addresses some of the major challenges of the energy management problem. At its high-level, a computationally-tractable Pseudospectral Optimal Controller (PSOC) with discounted cost is employed to approximately solve the powertrain's energy management problem over driving cycle previews of the entire trip. The high-level's approximate solution is then used as a reference by the low-level tube-based Model Predictive Controller (MPC) that solves the problem over higher-quality, short-horizon driving cycles in a real-time applicable fashion. For human-driven HEVs, a Long Short-Term Memory (LSTM) neural network predicts the human driver's velocity profile over low-level's short horizons. A velocity optimizer is added to the low-level for automated HEVs that optimizes the vehicle's driving cycle by effectively utilizing regenerative braking capability of the HEV. At the low-level, the tube-based MPC controller solves the powertrain's energy management problem over either predicted (human-driven HEV) or optimized (automated HEV) driving cycles by accounting for driving cycle's uncertainty, due to uncertain future information, and hence ensures robust constraints satisfaction. A novel cost-to-go approximation method is developed that uses the optimal costate trajectories obtained from the high-level PSOC controller to generate terminal costs for the low-level controller. This improves suboptimality of the short-horizon solutions and ensures charge balance constraint satisfaction at the end of the trip without having to impose conservative constraints. A novel learning-based framework is also proposed to jointly optimize the automated HEV's driving cycle and its powertrain's power split. A Deep Neural Network (DNN)-based MPC controller is developed for the low-level that jointly optimizes the HEV's driving cycle and powertrain energy management in a real-time applicable manner. To ensure constraints satisfaction, a novel Quadratic Programming (QP)-based projection of the DNN-based approximate control laws is proposed that can be efficiently solved in real-time. Simulation results over standard and real-world driving cycles demonstrate efficacy of the proposed control frameworks in terms of suboptimality (fuel efficiency) improvement, potential real-time applicability, and constraints (especially charge balance constraint) satisfaction in the presence of driving cycle uncertainty.
Show less
- Title
- Data-Driven Methods for Soft Robot Control and Turbulent Flow Models
- Creator
- Lopez, Esteban Fernando
- Date
- 2022
- Description
-
The world today has seen an exponential increase in its usage of computers for communication and measurement. Thanks to recent technologies,...
Show moreThe world today has seen an exponential increase in its usage of computers for communication and measurement. Thanks to recent technologies, we are now able to collect more data than ever before. This has dawned a new age of data-driven methods which can describe systems and behaviors with increasing accuracy. Whereas before we relied on the expertise of a few professionals with domain-specific knowledge developed over years of rigorous study, we are now able to rely on collected data to reveal patterns, develop novel ideas, and offer solutions to the world’s engineering problems. No domain is safe. Within the engineering realm, data-driven methods have seen vast usage in the areas of control and system identification. In this thesis we explore two areas of data-driven methods, namely reinforcement learning and data-driven causality. Reinforcement learning is a method by which an agent learns to increase its selection of ideal actions and behaviors which result in an increasing reward. This method was applied to a soft-robotic concept called the JAMoEBA to solve various tasks of interest in the robotics community, specifically tunnel navigation, obstacle field navigation, and object manipulation. A validation study was conducted to show the complications that arise when applying reinforcement learning to such a complex system. Nevertheless, it was shown that reinforcement learning is capable of solving three key tasks (static tunnel navigation, obstacle field navigation, and object manipulation) using specific simulation and learning hyperparameters. Data-driven causality encompasses a range of metrics and methods which attempt to uncover causal relationships between variables in a system. Several information theoretic causal metrics were developed and applied to nine mode turbulent flow data set which represents the Moehlis model. It was shown that careful consideration into the method used was required to identify significant causal relationships. Causal relationships were shown to converge over several hundred realizations of the turbulent model. Furthermore, these results match the expected causal relationships given known information of self-sustaining processes in turbulence, validating the method’s ability to identify causal relationships in turbulence.
Show less