Search results
(481 - 500 of 2,944)
Pages
- Title
- Integration of Process Improvement (sequence unknown), IPRO 304 - Deliverables
- Creator
- Bauer, Jessie, Bergeron, Tony, Campen, Matt, Gruchalski, Erik, Choi, Tae Ki, Marx, Ryan, Murti, Chaitanya, Robbins, Brian, Sohal, Atinder Pal, Stenson, Amanda, Taboada, Alejandro, Zhang, Bingjian
- Date
- 2009-12
- Description
-
A. Finkl and Sons require an effective way of detecting carbide inserts on the steel milling machine. These inserts break off due to stress...
Show moreA. Finkl and Sons require an effective way of detecting carbide inserts on the steel milling machine. These inserts break off due to stress and shape of metal and need to be replaced immediately to avoid further damage to the machine and the steel to be milled.
Sponsorship: A. Finkl and Sona
Deliverables for IPRO 304: Integration of Process Improvements for the fall 2009 semester.
Show less
- Title
- CMOS POLAR DIGITAL POWER AMPLIFIER FOR HIGH DATA RATE WIRELESS COMMUNICATIONS
- Creator
- Zhu, Qiuyao
- Date
- 2016, 2016-12
- Description
-
Power amplifier (PA) is the most important circuit block in an RF transmitter. It typically consumes more than 80% of the power taken by the...
Show morePower amplifier (PA) is the most important circuit block in an RF transmitter. It typically consumes more than 80% of the power taken by the entire transmitter. Therefore, a highly efficient PA is the key to a successful RF front-end system. The polar transmitter architecture is studied herein in order to take advantage of the highly efficient switching-mode PA. However, due to the large expanded bandwidth from the nonlinear IQ to polar conversion and the sensitive amplitude/phase delay impairment, hardly any reported polar design is able to transmit high data rate wireless communication signals. In this work, an extensive research on the digital polar transmitter system for high data rate signals is presented. An integrated CMOS digital power am- plifier (DPA) design is demonstrated afterwards. This DPA consists of 9-bit fully thermometer-coded uniform cells to achieve high linearity for wide bandwidth OFDM signals. By analyzing the amplitude and phase paths impairment, which will cause both in-band and out-of-band distortions, a 960 MHz digital delay tuner is designed for precise amplitude and phase alignment. Furthermore, two digital pre-distortion algorithms for DPA are implemented and compared. Importantly, an on-chip DC- DC converter is included for direct battery connection and power control. A boosted cascode gate bias improves PA efficiency at the low power region. The proposed design is fabricated using a 55 nm RF CMOS technology. The DPA with several peripheral blocks occupies only 0.63 mm2 active silicon area. This DPA including the digital AM filtering achieves a peak output power of +21.9 dBm with 41% efficiency. It achieves EVM of 2.9% with 20 MHz IEEE 802.11ac compliance of 256-QAM OFDM signals, and also achieves EVM of 4.5% (CC0) / 4.8% (CC1) with 2 x 20 MHz 3GPP LTE-Advanced carrier aggregation compliance of 64-QAM OFDM signals. This highly linear DPA has demonstrated high flexibility, high efficiency, and small area. To the author's knowledge, this is the first reported DPA that meets either the linearity requirements of 256-QAM OFDM signals or the signal bandwidth of 40 MHz, paving the path for wideband high data rate wireless applications using digital polar architecture. At the same time, aiming at a higher average efficiency, a two-level class- G supply modulator is investigated to dynamically switch the DPA VDD. It has successfully demonstrated an average efficiency of 34.6% for this class-G modulated DPA in a complete circuit simulation using the IEEE 802.11b signal.
Ph.D. in Electrical Engineering, December 2016
Show less
- Title
- MEASUREMENT OF 013 IN THE DOUBLE CHOOZ EXPERIMENT
- Creator
- Yang, Guang
- Date
- 2016, 2016-12
- Description
-
Neutrino oscillation has been established for over a decade. The mixing angle 013 is one of the parameters that is most difficult to measure...
Show moreNeutrino oscillation has been established for over a decade. The mixing angle 013 is one of the parameters that is most difficult to measure due to its small value. Currently, reactor antineutrino experiments provide the best knowledge of 013, using the electron antineutrino disappearance phenomenon. The most compelling advantage is the high intensity of the reactor antineutrino rate. The Double Chooz experiment, located on the border of France and Belgium, is such an experiment, which aims to have one of the most precise 013 measurements in the world. Dou- ble Chooz has a single-detector phase and a double-detector phase. For the single- detector phase, the limit of the 013 sensitivity comes mostly from the reactor flux. However, the uncertainty on the reactor flux is highly suppressed in the double- detector phase. Oscillation analyses for the two phases have different strategies but need similar inputs, including background estimation, detection systematics evalua- tion, energy reconstruction and so on. The Double Chooz detectors are filled with gadolinium (Gd) doped liquid scintillator and use the inverse beta decay (IBD) sig- nal so that for each phase, there are two independent 013 measurements based on different neutron capturer (Gd or hydrogen). Multiple oscillation analyses are per- formed to provide the best 013 results. In addition to the 013 measurement, Double Chooz is also an excellent playground" to do diverse physics research. For example, a 252Cf calibration source study has been done to understand the spontaneous decay of this radioactive source. Further, Double Chooz also has the ability to do a sterile neutrino search in a certain mass region. Moreover, some new physics ideas can be tested in Double Chooz. In this thesis, the detailed methods to provide precise 013 measurement will be described and the other physics topics will be introduced.
Ph.D. in Pyhsics, December 2016
Show less
- Title
- Laboratory Notebook 108
- Creator
- Zhang, Zhe, Burton-freeman, Britt
- Date
- 2010-03-05T16:11:19Z
- Description
-
This laboratory notebook relates to the " Thermal Inactivation of Ricin in phosphate buffer system and orange juice" project with Britt Burton...
Show moreThis laboratory notebook relates to the " Thermal Inactivation of Ricin in phosphate buffer system and orange juice" project with Britt Burton-Freeman as the Principle Investigator.
Show less
- Title
- IMAGE PROCESSING ALGORITHMS FOR PROSTATE CANCER LOCALIZATION WITH MULTISPECTRAL MAGNETIC RESONANCE IMAGING
- Creator
- Xin, Liu
- Date
- 2011-11, 2011-12
- Description
-
In this thesis, we develop a series of image processing algorithms to localize prostate cancer with multispectral magnetic resonance (MR)...
Show moreIn this thesis, we develop a series of image processing algorithms to localize prostate cancer with multispectral magnetic resonance (MR) images to guide biopsy, surgery and minimally invasive therapy. Besides, we develop a new method to for evaluation of image classification algorithms considering correlation between neighboring pixels. Prostate cancer is one of the most prevalent cancer types and one of the leading causes of cancer death among men in the United States. High-resolution MRI has shown higher accuracy than trans-rectal ultrasound (TRUS) to ascertain the presence of prostate cancer. In this work, three different types of MR techniques are employed to provide both morphological and functional information about the benign and malignant tissues of the prostate. These are T2-weighted (T2w) MRI, diffusionweighted imaging MRI (DWI) and dynamic contrasted enhanced MRI (DCE MRI). In the first chapter of this thesis, we briefly describe the fundamentals of different MR techniques, and the multispectral MR dataset used in our experiment. Then, we focus on two tasks of the prostate cancer localization problem: prostate gland extraction and prostate tumor localization. For each topic, we review the previous studies available in the literature, and present our methods with their advantages. Finally, the new image evaluation method considering correlation between pixels is presented. Our prostate segmentation method is fully unsupervised and extracts the prostate gland from DWI MRI in 3D by fusing the active contour model and shape prior information. For tumor localization, we develop an unsupervised approach which is based on fuzzy Markov random field (fuzzy MRF) model, a new scheme based on relative intensity values which can be combined with supervised segmentation classifiers to mimic the cancer localization procedures performed by human readers and a new feature named location map which incorporates the spatial inforx mation of the tumors to remove the need for manual peripheral zone extraction. The proposed image evaluation algorithm is based on receiver operating characteristics (ROC) analysis and it considers the correlation between neighboring pixels. This method could replace the conventional ROC analysis and offers a more accurate evaluation of the test image. Our algorithms are tested on 20 patients’ multispectral MR images, and the qualitative as well as quantitative experimental results demonstrate the efficacy of our segmentation methods and show that the proposed segmentation methods outperform the currently available used approaches. The evaluation method has been tested on computer simulated images and shows very promising results. The summary and future work is also described at the end of the thesis.
Ph.D. in Electrical Engineering, December 2011
Show less
- Title
- SOFT ERROR TOLERANT LATCH CIRCUIT DESIGN FOR DEEPLY SCALED CMOS TECHNOLOGY
- Creator
- Nan, Haiqing
- Date
- 2012-01-25, 2012-05
- Description
-
As CMOS technology keeps scaling down, circuit designers face variety of challenges. Due to the scaling of supply voltage and node capacitance...
Show moreAs CMOS technology keeps scaling down, circuit designers face variety of challenges. Due to the scaling of supply voltage and node capacitance, digital circuits are more aware of noise and variations, which cause reliability issues such as soft error. Traditionally the soft error aware VLSI design is limited to applications which require high reliability and operated in high radiation environment such as avionics applications, medical equipments, space industry and military applications. However, with CMOS technology scales down to nanometer region, the VLSI circuits can also be affected by soft errors at ground level which features low radiation energy. In this thesis, totally 5 soft error tolerant latch designs are proposed including HLR-1, HLR-2, HLR-CG1, HLR-CG2, and HLR-CG3. All the proposed designs protect internal nodes as well as output node for soft error regardless the radiation energy. The proposed HLR-1 and HLR-2 latch circuits tolerate soft error for non-CG systems. Since the proposed HLR-1 and HLR-2 designs take advantages of floating node to tolerate soft error, these two designs cannot be applied with clock gating techniques and the minimum clock frequency of these two designs should be greater than 16MHz in order to maintain correct logic at the floating node. The power consumption and circuit delay between the proposed HLR-1 and HLR-2 designs are very close. The proposed HLR-1 design achieves a small amount of benefits in terms of power and delay compared with the proposed HLR-2 design. But the proposed HLR-2 circuit reduces area 3.5% compared to the proposed HLR-1 circuit. The proposed HLR-CG1, HLR-CG2 and HLR-CG3 latch designs fully tolerate soft error regardless of radiation energy for both CG and non-CG systems. Due to the auto correction mechanism embedded in the proposed HLR-CG1, HLR-CG2 and HLRCG3 designs, any soft error at any location will be automatically corrected without generating any floating nodes. The proposed HLR-CG3 features the smallest power consumption and delay but it has the largest area overhead compared to HLR-CG1 and HLR-CG2 circuits. The proposed HLR-CG1 design features the smallest area compared with HLRCG2 and HLR-CG3 designs. The design cost of HLR-CG2 design is between the proposed HLR-CG1 and HLR-CG3 designs. All the proposed designs achieve faster speed and smaller PDP compared to previous hardening techniques. Compared to the proposed HLR-1 design, previous designs increases power 3.77% on average, delay 272.74% on average, PDP 300.29% on average and decreases area 7.09% on average. Compared to the proposed HLR-2 design, previous designs increases power 3.77% on average, delay 272.40% on average, PDP 299.89% on average and decreases area 3.93% on average. Compared to the proposed HLR-CG1 design, previous designs increases area 19.65% on average, delay 213.14% on average, PDP 203.78% on average and decreases power 5.82% on average. Compared to the proposed HLR-CG2 design, previous designs increase area 6.49% on average, delay 193.28% on average, PDP 223.45% on average and power 6.51% on average. Compared to the proposed HLR-CG3 design, previous designs increases delay 272.18% on average, PDP 314.38% on average, power 8.01% on average and area 2.93% on average.
Ph.D. in Electrical and Computer Engineering, May 2012
Show less
- Title
- IMPACT OF WORK FLOW DISRUPTIONS, PROJECT CHARACTERISTICS AND FOREMEN CHARACTERISTICS ON IMPROVISATIONAL DECISIONS AND ACTIONS ON CONSTRUCTION SITES
- Creator
- Kleps, Stephen M.
- Date
- 2013, 2013-12
- Description
-
Disruptions on construction sites are a constant issue and unfortunately can have negative impacts on the workflow and productivity of the...
Show moreDisruptions on construction sites are a constant issue and unfortunately can have negative impacts on the workflow and productivity of the impacted crews. As a result of these disruptions, foremen must quickly generate improvised solutions to the disruptions to keep the work of their crew progressing. Yet the mechanics of how exactly this improvisational decision making is occurring has not been previously studied. To address this void in the literature, this study examined the factors that may influence a foremen's ability to improvise, such as the type of disruption, the jobsite characteristics, and the personality, experience, and education of the foremen, in relation to the level of improvisation occurring. To accomplish this, this study collected data from 50 foremen within the electrical construction industry to measure to what degree they improvised and with what speed they improvised in response to their daily disruptions, resulting in 244 recorded disruption incidents. In analyzing these incidents with multilevel modeling analysis techniques, it was determined that the type of disruption did not have as large of an effect on the degree and speed of the resulting improvisation as originally hypothesized. In addition, it was found that factors such as the level of cooperation on the job site, the time pressure on the foremen, and the level of collaboration on the job site influenced the degree and speed of the improvisation. Yet the factors that explained the largest total variance in both the degree and speed of improvisation were the personality traits of the foremen. Thus, these findings emphasize the importance of foremen on job sites, while also documenting how improvisation is occurring on job sites.
PH.D in Civil Engineering, December 2013
Show less
- Title
- Selecting a Compensation Strategy to Control Project Duration: Empirical Comparison of Lump Sum and Reimbursable Strategies (Working Paper)
- Creator
- Chen, Juan, Menches, Cindy L.
- Date
- 2012-05-01, 2012-05-01
- Description
-
Reducing project duration is a significant concern for many industries in the speed-to-market era. Numerous studies have examined the effects...
Show moreReducing project duration is a significant concern for many industries in the speed-to-market era. Numerous studies have examined the effects of project delivery methods on speeding up the process of construction. However, no study has quantitatively compared the effect of using different compensation strategies on schedule duration and schedule reduction. Using the data obtained from 175 international construction projects, this paper focuses on examining the influence of compensation strategy (lump sum versus reimbursable) on project duration while specifically taking into account the industry sector (heavy industrial versus light industrial). The results of the study provide empirical evidence that using a reimbursable compensation strategy can potentially shorten the procurement duration, construction duration, and overall project duration of heavy industrial projects. However, reimbursable contracting did not appear to reduce the project duration on light industrial projects.
Show less
- Title
- Power Measurement for Road Bicycles: Towards a Universal Solution (sequence unknown), IPRO 324 - Deliverables: IPRO 324 IPRO Day Presentation F09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available measuring systems are not very accurate.
Deliverables for IPRO 324: Power Measurement for Road Bicycles: Towards a Universal Solution for the fall 2009 semester
Show less
- Title
- Green Building Design Concept & Integration (sequence unknown), IPRO 335 - Deliverables: IPRO 335 Midterm Presentation F09
- Creator
- Avanessian, Aris, Banda, Justine, Bergerson, Joshua, Burke, Jeffrey, Christo, Robert, Dexter, Eric, Kim, Kibum, Mey, Andrew, Okunaga, Jonathan, Razeq, Ali, Schaefer, Jacqueline, Thovar Leon, Adrian, Um, Hye
- Date
- 2009-12
- Description
-
The scope of this IPRO project spans structural, architectural, foundation, HVAC, lighting and electric system designs, as well as building...
Show moreThe scope of this IPRO project spans structural, architectural, foundation, HVAC, lighting and electric system designs, as well as building cost estimating and professional ethics. The IPRO team will become informed about and apply principles associated with green design concepts, energy sustainability, post occupancy comfort, acoustic design issues, smart building concepts, health issues (abatement of mold- and allergy-causing agents), and safety considerations.
Deliverables for IPRO 335: Green Building Design Concept & Integration for the fall 2009 semester
Show less
- Title
- TRACK on Devon Avenue
- Creator
- Kohn, Adi
- Date
- 2011, 2011-05
- Description
-
This project encourages innovative design and planning concepts that further the development of a better, healthier and more active lifestyle...
Show moreThis project encourages innovative design and planning concepts that further the development of a better, healthier and more active lifestyle through the infusion of activities into everyday practices in a space inhabited daily. It is not about encouraging us to go to the gym and workingout more. It’s about giving citizens a workout through their interactions with this environment on a daily basis.
Show less
- Title
- Improving Efficiency Through Advanced Technology for Electrical Construction (sequence unknown), IPRO 338 - Project Plan: IPRO 338 Project Plan F09
- Creator
- Kyung Cho, Bum, Crites, Sarah, Czapla, Sarah, Guerrero, Jose, Kim, Yoosuk, Malawski, Frank, Maloney, Michael, Pedrina, Kaleo, Qiu, Li, Yi, Jennifer
- Date
- 2009-12
- Description
-
The team is to improve the efficiency of electrical contracting projects through new software and technology, communications, and project...
Show moreThe team is to improve the efficiency of electrical contracting projects through new software and technology, communications, and project management techniques, especially through Building Information Modeling (BIM) utilization.
Sponsorship: Electrical Contractor's Association
Project Plan for IPRO 338: Improving Efficiency Through Advanced Technology for Electrical Construction for the fall 2009 semester
Show less
- Title
- DEVELOPMENT AND ANALYSIS OF A SECURE AND EFFICIENT VEHICULAR AD HOC NETWORK
- Creator
- Hao, Yong
- Date
- 2012-07-06, 2012-07
- Description
-
Vehicular ad hoc networks (VANETs) enable vehicles to communicate with each other by equipping every vehicle with an on board unit (OBU). Many...
Show moreVehicular ad hoc networks (VANETs) enable vehicles to communicate with each other by equipping every vehicle with an on board unit (OBU). Many interesting and promising functionalities can be achieved in the VANETs, such as safety related application and data downloading application. In this thesis, we focus on the security and privacy provision as well as efficiency improvement of above two applications in the VANETs. In the safety related application, each vehicle periodically broadcasts messages including its current position, direction and velocity (which can be generated by a global positioning system (GPS) device) to inform its geographic data to its neighbors. Privacy is an important issue in VANETs. Meanwhile, some important security functionalities such as message authentication, integrity and non-repudiation should be integrated into the VANETs. In this thesis, we propose a distributed key management protocol based on group signature to provide security and privacy for vehicles. Distributed key management is expected to facilitate the revocation of malicious vehicles, verification efficiency, maintenance of the system and heterogeneous security policies, compared with the centralized key management assumed by the existing group signature schemes. In our framework, each road side unit (RSU) acts as the key distributor for the group, where a new issue incurred is that the semi-trust RSUs may be compromised. Therefore, we develop security protocols which are able to detect compromised RSUs and their malicious accomplices. Moreover, we address the issue of large computation overhead due to the group signature implementation. A practical cooperative message authentication protocol (CMAP) is thus proposed to alleviate the verification burden for vehicles. In the CMAP, on average, each vehicle just needs to verify a very small amount of received geographic messages. Compared with the existing probabilistic verification protocol, CMAP can save at least 40 % computation resource for vehicles. In the data downloading application, we propose a secure cooperative data downx loading framework for payment services in VANETs. In our framework, vehicles download data when they pass by an RSU and then share the data after they travel out of the RSU’s coverage. A fundamental issue of our framework is how vehicles share data with each other. Thus, we develop an application layer data sharing protocol (DSP) in which vehicles share their downloaded data one by one in sequence according to their positions. A better performance can be achieved by the proposed protocol because it is able to avoid medium access control (MAC) layer collisions and the hidden terminal effect. Analytical models are derived to quantitatively evaluate the impact of the distance between RSUs on the amount of data that vehicles can download in a drive through. The simulation results show that our protocol can download 87.4% more data for vehicles than the existing scheme “VC-MAC” when the distance between two consecutive RSUs reaches 10 kilometers. Moreover, we also address security and privacy issues in the process of data downloading and sharing. Both applicants’ exclusive access to the applied data and vehicles’ privacy are ensured by our framework. Compared with the communication overhead in the intuitive method, the communication overhead in our framework will be reduced to 50%. We also propose a security protocol to detect sybil attacks in privacy preserved VANETs. In the above two applications, vehicles’ location information is utilized to facilitate the efficiency. However, if malicious vehicles launch the sybil attack by forging several fake entities and claim they are at some certain positions. The overall performance of the applications will be compromised greatly. So, we propose a security protocol to detect sybil attacks by examining the rationality of vehicles’ positions. The attack detection utilizes the characteristics of communication. No extra hardware and little communication and computation overhead will be introduced to vehicles. Moreover, a smart attacker scenario in which a malicious vehicle may adjust its communication range to avoid detection and the malicious vehicles’ collusion scenario are also considered.
Ph.D. in Computer Engineering, July 2012
Show less
- Title
- STUDIES ON RING OPENING REACTIONS AND SYNTHETIC APPLICATIONS OF AZIRIDINIUM IONS
- Creator
- Sun, Xiang
- Date
- 2013, 2013-12
- Description
-
Aziridinium ions are valuable and important intermediates to prepare complex nitrogen containing compounds. Various enantiomerically enriched ...
Show moreAziridinium ions are valuable and important intermediates to prepare complex nitrogen containing compounds. Various enantiomerically enriched -haloamines were synthesized as precursors to generate aziridinium ions in situ. Optically active aziridinium perchlorates or triflates were prepared and characterized using 1H and 13C NMR. Regioselective and enantioselective ring opening reactions of aziridinium ions with diverse nucleophilies including cyanide, azide, amines, hydride and water were extensively studied. An efficient one-pot synthetic route to enantiomerically enriched alcohols and amine precursors was developed. Development of the adequate bifunctional chelators is a critical step for radioimmunotherapy (RIT) of cancer. The practical and scalable regiospecific ring opening reactions of aziridinium ions with macrocyclic amines were utilized for synthesis of a series of bifunctional ligands including 3p-C-NETA, C-NE3TA, 3p-C-NE3TA, 3p-C-DECA, 3p-C-DE4TA, an optically active (S)-C-NE3TA, and bifunctional DTPA analogues for RIT using 90Y and 177Lu. Preparation of bifunctional chelators that can rapidly form 64Cu complexes with high stability is an imminent goal for effective PET imaging. A series of NOTA and NE3TA-based chelators were prepared. NE3TA-based bile acid conjugates and NE3TA- based dual receptor-targeted conjugates were synthesized and possess potential for application of targeted PET imaging with 64Cu.
PH.D in Chemistry, December 2013
Show less
- Title
- Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 Abstract F08
- Creator
- Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
- Date
- 2008, 2008-12
- Description
-
The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less
- Title
- Overlap Overlay
- Creator
- Wankel, Jordan
- Date
- 5/4/2011, 2011-05
- Description
-
The purpose of this overlay is to provide the proper mechanics which allows a new type of home ownership while addressing current urban...
Show moreThe purpose of this overlay is to provide the proper mechanics which allows a new type of home ownership while addressing current urban vacancy. The overlay attempts to be democratic. It establishes basic rules based on the existing block requirements, while also providing flexibility within. Residents voluntarily participate in the system, benefiting from the whole. Social interactions, block orientated activities, and housing arrangements expand and contract over time.
Sponsorship: Goodman, David
Show less
- Title
- Our Energy Future: Lessons in Sustainability AND IPRO Teams for K-12: The Education Outreach Service Learning Cluster (sequence unknown), IPRO 332 - Deliverables: IPRO%20332%20Final%20Report%20F09_redacted
- Creator
- Chavez, Jorge, Johnson, Ross, Chin, Jason, Grande, Gina, Lay, Livia, Mccloat, Declain, Nguyen, Nam, Olechno, Patrick, Randle, Jennifer, Tyler Ii, Micheal, Vega, Mayra, Weiner, Andrew, Zajac, Gregory
- Date
- 2009-12
- Description
-
The mission of the IPRO is to educate the community, focusing mainly on elementary and high school students, on the issues of sustainability...
Show moreThe mission of the IPRO is to educate the community, focusing mainly on elementary and high school students, on the issues of sustainability and energy conservation. The group looks to expand on the work that has been completed in previous semesters, by adding multi-media presentations to enhance the current teaching modules. Previous modules have presented to classrooms simply with information, and the team looks to add upon this by adding interactive and entertaining materials to intrigue the audience.
Deliverables for IPRO 332: IOur Energy Future: Lessons in Sustainability AND IPRO Teams for K-12: The Education Outreach Service Learning Cluster for the fall 2009 semester
Show less
- Title
- Innovative Mapping (sequence unknown), IPRO 303 - Deliverables: IPRO 303 Project Plan F09
- Creator
- Komoroski, Aaron, Mora, Andres, Sarraf, Basel, Kemp, Brandon, Duong, Cindy, Woodward, Frank, Suwada, Jerry, Michael, Mark, Sinha, Piyush, Glover, Richard, Mandrekar, Urba
- Date
- 2009-12
- Description
-
The team worked to target the majority of mobile device users and give them an outlet to report any changes, mistakes or developments that...
Show moreThe team worked to target the majority of mobile device users and give them an outlet to report any changes, mistakes or developments that have been overlooked by NAVTEQ in the company's mobile mapping solutions. The team also worked to develop a solution that enables the average map user – men and women ages 18-35, students and tourists – to address these alterations in a simple, hassle-free way.
Sponsorship: NAVTEQ
Deliverables for IPRO 303: Innovative Mapping for the fall 2009 semester.
Show less
- Title
- Protecting the Artists' Social Construct in a Mutually Beneficial Developer Environment: DSheen_ProtectingArtistSocialConstruct_Board
- Creator
- Sheen, Daniel
- Date
- 2011, 2011-05
- Description
-
This project is a mixed-use high rise which will incorporate the program of the newly constructed high rise buildings of retail, hotel, and...
Show moreThis project is a mixed-use high rise which will incorporate the program of the newly constructed high rise buildings of retail, hotel, and condominiums with the program of the existing Powerhouse Arts District, art gallery, auction house, art work spaces, and artist lofts. In order for this combination of program to occur and to retain developer interest in this high rise tower, relationships between the program were investigated. Typical “inefficient” or unleasable spaces in a traditional high rise were used as opportunities to incorporate these art district programs into the site. Artist lofts were design on the perimeter of the mechanical floors to take advantage of double height spaces as well as privacy. Art galleries, and an auction house was incorporated on the lower service level in order to take advantage of loading/unloading access. Art work spaces were designed around program which required column free spacing and a sunken art plaza was designed to add additional frontage to different retail and art programs located below grade. The design of both the high rise and its program intends to restore the deteriorating identity of the Powerhouse Arts District in Jersey City, NJ.
Show less
- Title
- Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 Project Plan F08
- Creator
- Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
- Date
- 2008, 2008-12
- Description
-
The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less