Search results
(21 - 40 of 4,486)
Pages
- Title
- SEARCHING ENCRYPTED CLOUD DATA
- Creator
- Urs, Karthik Mahendra Raje
- Date
- 2011-05-04, 2011-05
- Description
-
The major setback of the cloud is its inability to induce strong trust in its users. For us, the users of the cloud, to be sure of the...
Show moreThe major setback of the cloud is its inability to induce strong trust in its users. For us, the users of the cloud, to be sure of the security of the data from other users, we have to trust cloud. In most of the cases, say if the data were to be hosted on Microsoft’s servers, we can trust Microsoft in its policies to prevent unauthorized access to it from other users (via hacking). But, the issue that is haunting the cloud is this - ”How can we be sure that our data is safe from Cloud service providers themselves?” The most intuitive solution for the cloud service provider to gain trust is to insist we encrypt our data. That is an irrefutable act of honesty from the cloud. But this has some obvious setbacks, few of which would negate the very advantages of cloud. One such issue that dictates the scope of this thesis is this - Typical cryptographic algorithms are not amenable to search. Now, if we were to implement a search engine on cloud (which has the data encrypted), the native search techniques have to be extended on to the cryptographic domain so that the cloud can perform the tasks of a search engine. This thesis explores the solutions to the above mentioned problem of searching over encrypted data, specifically using a secure pre-processed index approach. Though significant ideas have been proposed in the area, there is no concrete implementation to analyze if it can be used in the industrial setting. The main goal of the thesis is to implement a system which supports a variety of searching techniques. We make use of Amazon EC2 and test out the designed systems to evaluate how feasible they are for immediate consumption by the industry.
M.S. in Computer Engineering, May 2011
Show less
- Title
- CONTROLLER DESIGN AND DISTRIBUTED CONTROL WITHIN MULTI-AGENT SYSTEMS
- Creator
- Shao, Quan Min
- Date
- 2013, 2013-12
- Description
-
None
PH.D in Chemical and Biological Engineering, December 2013
- Title
- Screech Tones from Rectangular Jets with Spanwise Oblique Shock-cell Structures
- Creator
- Raman, G.
- Date
- 1997-01-10
- Publisher
- Cambridge Univ Press
- Description
-
Understanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft...
Show moreUnderstanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft structures. Although the connection between shock-cell spacing and screech frequency is well understood, the relation between non-uniformities in the shock-cell structures and the resulting amplitude, mode, and steadiness of screech have remained unexplored. This paper addresses the above issues by intentionally producing spanwise (larger nozzle dimension) variations in the shock-cell structures and studying the resulting spanwise screech mode. The spanwise-oblique shock-cell structures were produced using imperfectly expanded convergent-divergent rectangular nozzles (aspect ratio = 5) with non-uniform exit geometries. Three geometries were studied: (a) a nozzle with a spanwise uniform edge, (b) a nozzle with a spanwise oblique (single-bevelled) edge, and (c) a nozzle that had two spanwise oblique (double-bevelled) cuts to form an arrowhead-shaped nozzle. For all nozzles considered, the screech mode was antisymmetric in the transverse (smaller nozzle dimension) direction allowing focus on changes in the spanwise direction. Three types of spanwise modes were observed: symmetric (I), antisymmetric (II), and oblique (III), The following significant results emerged: (i) for all cases the screech mode corresponds with the spanwise shock-cell structure, (ii) when multiple screech modes are present, the technique presented here makes it possible to distinguish between coexisting and mutually exclusive modes, (iii) the strength of shocks 3 and 4 influences the screech source amplitude and determines whether screech is unsteady. The results presented here offer hope for a better understanding of screech and for tailoring shock-containing jets to minimize fatigue failure of aircraft components.
Show less
- Title
- VALIDATION OF BAKING TO INACTIVATE SALMONELLA IN HIGH-PROTEIN AND HIGH-FAT MODEL FOODS
- Creator
- Wang, Wenqian
- Date
- 2017, 2017-07
- Description
-
Baked food products, such as dry pet foods, undergo changes of temperature and water activity (aw) during forced hot air processes. As one of...
Show moreBaked food products, such as dry pet foods, undergo changes of temperature and water activity (aw) during forced hot air processes. As one of the most thermal resistant microorganisms in low-moisture/intermediate moisture foods, Salmonella’s thermal inactivation kinetics during these processes is not well understood and difficult to predict. The objective of this study was to evaluate thermal inactivation kinetics of Salmonella enterica serovar Agona 447967 in model high-protein (HP) and high-fat (HF) multiple-component foods baked in a laboratory-scale oven, as influenced by oven temperature and relative humidity (RH). Model high-protein and high-fat foods, formulated with wheat flour, soy protein and soy oil, were inoculated with Salmonella Agona to a level of ~9 log CFU/g, and mixed to form a homogenous dough. Dough samples (57 mm diameter x 6 mm thick) were baked (3 samples per dwell time, 6 dwell times per condition) in a lab-scale oven at 120°C (10% RH) and 85°C (20%, 35% RH, 50% RH), respectively. Temperature and aw were measured at the surface and geometric center of the product during baking. Processed samples were collected in sterile bags and immediately cooled in an ice-water bath. Salmonella was enumerated on trypticase soy agar supplemented with yeast extract and incubated at 37°C for 24 h. Similar reductions (p>0.05) of 5.12-, 5.11-, 4.55-, and 4.78-log CFU/g were achieved after 40 min at 120°C/10% RH, 90 min at 85°C/20% RH, 50 min at 85°C/35% RH, 8 min at 85°C/50% RH, respectively, in the high-protein model food. Similar results were achieved in the high-fat matrix. The aw at the geometric center of the product (initially at aw =0.98) did not change appreciably during baking, while the aw at the product surface, the location of least lethality, decreased significantly (p<0.05) during baking; the decreases were more pronounced at lower oven RH. The results indicate that thermal inactivation of Salmonella Agona was driven by temperature and relative humidity in the oven. Higher temperature and higher relative humidity level led to greater Salmonella inactivation.
M.S. in Food Process Engineering, July 2017
Show less
- Title
- NUMERICAL SIMULATION OF AIR FLOW OVER A THIN OIL FILM
- Creator
- Dziedzic, William M.
- Date
- 2014, 2014-12
- Description
-
Turbulent boundary layer flow research uses oil film and oil drop interferometry to measure wall shear stress of air flows. Oil film...
Show moreTurbulent boundary layer flow research uses oil film and oil drop interferometry to measure wall shear stress of air flows. Oil film interferometry determines the rate oil decreases on a surface as the function of the shear stress magnitude. Current traditional methods have proven to be accurate but the solution is obtained by assuming a linear height distribution [3]. This assumes a constant shear stress along the oil drop and assures that there is no effect of the oil drop on the incoming boundary layer [3]. This effect maintains the continuity of shear stress at the air/oil interface, but the stream-wise velocity at the interface is discontinuous. It is thought that these approximations contain small errors but this has not been verified for zero pressure gradient turbulent boundary layer [3]. A computational fluid dynamics numerical study was performed to simulate the two-dimensional (2D) and three-dimensional (3D) effects of air flow over an oil drop and the drop’s movement across the channel surface.
M.S. in Mechanical and Aerospace Engineering, December 2014
Show less
- Title
- Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King (sequence unknown), IPRO 314 - Deliverables: IPRO 314 Final Report F09
- Creator
- O’leary, Kevin, Petty, Sonya, Qi, Tianshu, Tan, Sophia, Noor, Nashrah, Schleich, Kenneth, Akhtar, Ayesha, Cheng, Eric, Kim, James, Parker, Joseph, Saha, Sougata
- Date
- 2009-12
- Description
-
The objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Spo...
Show moreThe objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Sponsorship: Gage Park High School
Deliverables for IPRO 314: Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King for the fall 2009 semester.
Show less
- Title
- EARTH ORIENTATION PARAMETER FAULT MONITOR FOR HIGH INTEGRITY GNSS AVIATION APPLICATIONS
- Creator
- James Meno, Joel Patrick
- Date
- 2013-05-01, 2013-05
- Description
-
This paper develops threat models and mitigation techniques for mutually consistent satellite faults that are not detectable using Advanced...
Show moreThis paper develops threat models and mitigation techniques for mutually consistent satellite faults that are not detectable using Advanced Receiver Autonomous Integrity Monitoring (ARAIM) methods but are potentially hazardous to aviation users. Faults in the generation of Earth Orientation Parameters (EOPs), EOP Predictions (EOPPs) and their subsequent processing by the GPS Operational Control Segment (OCS) are of particular interest. In principle, if such faults are not detected by OCS, GPS satellite ephemerides could be corrupted constellation-wide in a consistent way, rendering existing ARAIM algorithms ineffective. The initial credibility of the EOP threat is established by the fact that it is explicitly listed as a potential integrity failure mode in the current GPS Standard Positioning Service Performance Standard (GPS SPS). Additionally, an observed EOP fault occurred on June 17, 2012. The dynamics of EOP faults can be reliably modeled as an initial bias with additive linear time variations. An initial broadcast ephemeris (A) is assumed to be EOP fault free and is verified as such via a ground monitor. If the second ephemeris (B) contains an EOP fault, then all satellite positions computed using ephemeris (B) would be rotated with respect to satellite positions obtained from ephemeris (A). Using the difference between the two computed satellite positions as the monitor 'measurement' in conjunction with the dynamic fault model, the parameters defining the EOP fault can be estimated using weighted least squares estimation. The two monitor components (airborne and ground) are bridged together by an Integrity Support Message (ISM). The ISM is needed to provide airborne users with essential information to bound nominal error distributions and fault prior probabilities. xiii The ISM also provides a means to inform airborne users of which ephemerides have passed civil ground monitor validation. The frequency of ISM updates needed to protect airborne GNSS users from the EOP threat is specified. Finally, global availability analysis show that the inclusion of the EOP fault detection algorithms does not cause any availability loss for LPV-200 aircraft precision approach applications.
M.S. in Mechanical and Aerospace Engineering, May 2013
Show less
- Title
- Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry (sequence unknown), IPRO 333 - Deliverables: IPRO 333 Project Plan F09
- Creator
- Bonesz, Andrew, Clark, Howard, Douglas, Carlie, Gajdorus, Michael, Gottschall, Keenan, Hendricks, Rachel, Kimball, Clayton, Linares, Jared, Marks, Paul, Mellom, James, Oblenida, Cindy, Pop, Sabina, Stelcel, Carl, Young, Jeremy, Zhou, Raymond
- Date
- 2009-12
- Description
-
The primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the...
Show moreThe primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the resources of the Museum of Science and Industry (MSI) in Chicago. This partnership endeavors to help the museum's Fabrication Laboratory (Fab Lab) maximize its potential as a resource for museum guests, young and old, as well as for IIT students, staff, and faculty.
Sponsorship: Museum of Science and Industry. Steven Willis- Director, Fabrication Lab
Deliverables for IPRO 333: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry for the fall 2009 semester
Show less
- Title
- Our Energy Future: Lessons in Sustainability AND IPRO Teams for K-12: The Education Outreach Service Learning Cluster (sequence unknown), IPRO 332 - Deliverables: IPRO 332 Poster F09
- Creator
- Chavez, Jorge, Johnson, Ross, Chin, Jason, Grande, Gina, Lay, Livia, Mccloat, Declain, Nguyen, Nam, Olechno, Patrick, Randle, Jennifer, Tyler Ii, Micheal, Vega, Mayra, Weiner, Andrew, Zajac, Gregory
- Date
- 2009-12
- Description
-
The mission of the IPRO is to educate the community, focusing mainly on elementary and high school students, on the issues of sustainability...
Show moreThe mission of the IPRO is to educate the community, focusing mainly on elementary and high school students, on the issues of sustainability and energy conservation. The group looks to expand on the work that has been completed in previous semesters, by adding multi-media presentations to enhance the current teaching modules. Previous modules have presented to classrooms simply with information, and the team looks to add upon this by adding interactive and entertaining materials to intrigue the audience.
Deliverables for IPRO 332: IOur Energy Future: Lessons in Sustainability AND IPRO Teams for K-12: The Education Outreach Service Learning Cluster for the fall 2009 semester
Show less
- Title
- VIBRATIONAL CONTROL OF AN EXOTHERMIC CSTR - PRODUCTIVITY IMPROVEMENT BY MULTIPLE INPUT OSCILLATIONS
- Creator
- Shu, X. S., Rigopoulos, K., Cinar, A.
- Date
- 1989-02
- Publisher
- IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
- Description
-
A. Cinar et al. (1987) have shown that vibrational control of an exothermic continuous stirred tank reactor (CSTR) by vibrating the total flow...
Show moreA. Cinar et al. (1987) have shown that vibrational control of an exothermic continuous stirred tank reactor (CSTR) by vibrating the total flow rate modifies its behavior and leads to stabilized operation in its unstable steady-state region. Here, the effect of multiple vibrating inputs and the contribution of their phase shift are investigated. Theoretical and experimental results indicate productivity improvement and amplitude reduction in reactor temperature swings by vibrating both input flow rate and input concentrations.
Endnote format citation
Show less
- Title
- Automated control of high temperature short time pasteurization
- Creator
- Negiz, A., Cinar, A., Schlesser, J. E., Ramanauskas, P., Armstrong, D. J., Stroup, W.
- Date
- 1996-12
- Publisher
- ELSEVIER SCI LTD
- Description
-
Cascade and multivariable control of a high temperature shot? time (HTST) pasteurization system were tested and compared with the performance...
Show moreCascade and multivariable control of a high temperature shot? time (HTST) pasteurization system were tested and compared with the performance of single-loop feedback control. Multivariable control was implemented on the basis of computations of product temperatures that yield equivalent lethality at a residence time of 15 s at 161 degrees F in the holding tube. Both cascade and multivariable controllers reduced product temperature fluctuations and overshoot compared to single-loop feedback control. Multivariable control was based on on-line computation of equivalent total lethality and it permitted operation at variable flow rates or at the most desirable temperatures for product quality and functionality. Copyright (C) 1996 Elsevier Science Ltd.
Endnote format citation
Show less
- Title
- Some experiments on heat transmission
- Creator
- Ruef, J. E.
- Date
- 2009, 1912
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/someexperimentso00ruef
Thesis (B.S.)--Armour Institute of Technology
- Title
- The synchronous motor
- Creator
- Sleezer, Frank W., Williams, Wallace, Kelkenney, Artemas A.
- Date
- 2009, 1907
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/synchronousmotor00slee
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaves 35-37
- Title
- Hostile Spaces and Hostel Spaces: Re-Visioning Highway Infrastructure
- Creator
- Smith, Kevin
- Date
- 2010-07-30
- Title
- Polarised Drell-Yan physics at COMPASS, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
- Creator
- Franco, Celso
- Date
- 2013-09-15, 2013-09-15
- Publisher
- IIT Press
- Description
-
The COMPASS experiment at CERN is one of the leading experiments studying the spin structure of the nucleon. Until now, the Parton...
Show moreThe COMPASS experiment at CERN is one of the leading experiments studying the spin structure of the nucleon. Until now, the Parton Distribution Functions (PDFs) and the Transverse Momentum Dependent Parton Distribution Functions (TMD PDFs) of protons and deuterons have been studied in Semi-Inclusive Deep Inelastic Scattering (SIDIS) measurements. The polarised Drell-Yan (DY) process is a complementary way to access the TMD PDFs, as it allows us to measure convolutions of only PDFs without involving fragmentation functions (FFs). COMPASS aims to perform the first ever polarised DY experiment in the world, which is foreseen to start in late 2014. By detecting dimuons from DY events we will be able to extract azimuthal spin asymmetries, each containing a convolution of two TMD PDFs, one from a negative pion beam with a momentum of 190 GeV/c and the other one from a transversely polarised proton target (NH₃). After their disentangling we can access four of the eight TMD PDFs needed to describe the nucleon structure at leading twist, like the Sivers and the Boer-Mulders functions. The opportunity to study, in the same experiment, the TMD PDFs from both SIDIS and DY processes is unique at COMPASS. Therefore, we are in privileged conditions to confirm or to deny the expected sign change in Sivers and Boer-Mulders functions when accessed via DY or SIDIS processes. An overview of the preparation and future measurements of the polarised DY experiment will be provided.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less
- Title
- POLYMER ELECTROLYTE MEMBRANES FOR ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE SYSTEMS: FUEL CELLS AND REDOX FLOW BATTERIES
- Creator
- Yun, Sukhwan
- Date
- 2014, 2014-12
- Description
-
Direct methanol fuel cells (DMFCs) and redox flow batteries (RFBs) are well-known electrochemical energy conversion/storage systems that...
Show moreDirect methanol fuel cells (DMFCs) and redox flow batteries (RFBs) are well-known electrochemical energy conversion/storage systems that utilize redox reactions to convert or store electricity. Ion exchange membranes (IEMs) are used in DMFCs and RFBs as electrolyte separators. The critical requirements for IEMs in these applications are high ionic conductivity, low electrolyte permeability, high stability, and low cost. Silsesquioxane (SQO)-based sulfonated poly(etheretherketone) composite membranes were synthesized. Morphological changes in the composite membranes resulting from the introduction of SQO were studied using small-angle x-ray scattering. A sharp decrease in proton conductivity with SQO loading (> 20 wt%) was attributed to morphological changes in the membrane, including agglomeration and inhomogeneous dispersion of SQO particles within the ionic domains. Anion exchange membranes (AEMs) based on quaternized cardo-poly(etherketone) (QPEK-C) were prepared and evaluated for all-vanadium RFB (VRFB) applications. The QPEK-C AEMs with different degrees of functionalization (0.9–1.6) exhibited sulfate ion conductivities ranging between 5.6 and 15.2 mS cm-1 at 30 oC. The AEM had a lower VO2+ permeability (2.8×10-8 cm2 s-), compared to that of Nafion® 212 (2.9±0.2 ×10-7 cm2 s-1), which was attributed to the Donnan exclusion effect. The mechanical strength of QPEK-C AEM degraded by 35% after exposure to a 1.5 M VO2+ solution for 1500 hours due to the oxidation of aromatic rings. A single-cell VRFB employing the AEM separator yielded current and energy efficiencies (at 30 mA cm-2) of 97-99% and 80-82 %, respectively. Enhanced sulfate ion conductivity (8.4 ± 0.2 mS cm-1) and decreased VO2+ permeability (0.53×10-9 cm2 s-1) were achieved by incorporating 20 wt% of n-(trimethoxysilylpropyl)-n,n,n-trimethylammonium additives into QPEK-C, (the pristine QPEK-C AEM yielded corresponding values of 4.5 ± 0.5 mS cm-1 and 1.09×10-9 cm2 s-1). About 99% coulombic efficiency was achieved with the VRFBs employing the composite AEM. However, a rapid reduction of the ionic conductivity down to the value of the pristine membrane was observed when the composite AEM was immersed in 1.5 M VO2+ solution for 3 days. Vanadium-cerium RFBs (V-Ce RFBs) evaluated with QPEK-C AEM separators yielded identical energy efficiency (84%) to corresponding RFBs evaluated with Nafion® 212. However, after over 20 charge-discharge cycles, the V-Ce RFB with the AEM separator yielded unchanged efficiency and capacity, while a 50% loss of capacity was observed with the Nafion® separator. This suggested that QPEK-C AEMs are promising candidates for RFB separators when different cations are used in the two electrolyte solutions, in that they act as efficient barriers that preclude the intermixing of the cations due to the Donnan exclusion effect.
Ph.D. in Chemical Engineering, December 2014
Show less
- Title
- Test and report of a modern ice plant
- Creator
- Heim, Karl, Fitch, Joseph E, Jones, Charles H, Hirschfeld, George
- Date
- 2009, 1909
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/testreportofmode00heim
Thesis (B.S.)--Armour Institute of Technology
- Title
- Church & School Energy Efficiency and Financing Program (sequence unknown), IPRO 328 - Deliverables: IPRO 328 IPRO Day Presentation F09
- Creator
- Ciuffini, Kathryn, Kim, Ja Young, Knapczyk, Robert, Mckinley, Matthew, O'brien, Patrick, Maddamma, Todd, Schafer, Michael, Soderling, Philip, Wedster, Bonnie
- Date
- 2009-12
- Description
-
The Fall 2009 IPRO 328 team envisions the development and ultimately execution of a volunteer program which would facilitate the...
Show moreThe Fall 2009 IPRO 328 team envisions the development and ultimately execution of a volunteer program which would facilitate the implementation of energy saving improvements in a church and/or parochial school within the surrounding neighborhoods of IIT campus.
Sponsorship: Vince Cushing of Clean Urban Energy
Deliverables for IPRO 328: Church & School Energy Efficiency and Financing Program for the fall 2009 semester
Show less
- Title
- THERMAL STABILITY OF FOOD ALLERGENS AND NONALLERGENIC PROTEINS: A COMPARATIVE STUDY
- Creator
- Wu, Yan
- Date
- 2015, 2015-07
- Description
-
Thermal stability has been proposed as a criterion to assess the allergenic potential of genetically modified foods, but there is a lack of...
Show moreThermal stability has been proposed as a criterion to assess the allergenic potential of genetically modified foods, but there is a lack of information on the relative thermal stability of food allergens vs. nonallergenic proteins. This study compared the thermal stability of several paired food allergens and nonallergenic proteins by measuring the changes in their solubility, antigenicity and thermodynamic properties after thermal treatment using BCA total protein assay, inhibition ELISA assay, Differential Scanning Calorimetry and Far-UV Circular Dichroism Spectroscopy. The selected protein pairs included bovine α-lactalbumin (allergen) vs. human α-lactalbumin (nonallergen), peanut lectin (allergen) vs. concanavalin A (nonallergen), soybean trypsin inhibitor (allergen) vs. lima bean trypsin inhibitor (nonallergen). With respect to protein solubility, a greater thermal stability was observed for: (1) bovine α-lactalbumin (bovine ALA) when it was autoclaved in water compared with human α-lactalbumin (human ALA) (2) peanut lectin when it was boiled or autoclaved in water compared with concanavalin A (ConA) and (3) soybean trypsin inhibitor (STI) when it was boiled in water or PBS, or autoclaved in water compared with lima bean trypsin inhibitor (LTI). Regarding TM values determined by DSC: (1) bovine ALA was more thermally stable than human ALA under both dry-heat treatment and moist-heat treatment (2) ConA was more thermally stable than peanut lectin during moist-heat treatment, while a greater thermal stability was observed for peanut lectin when the protein was under dry-heat treatment (3) LTI was more thermally stable than STI during heating in water or under dry-heat treatment, while a greater thermal stability was observed for STI when the protein was heated in PBS. Based on CD analyses, (1) bovine ALA was more thermally stable than human ALA (2) peanut lectin was more thermally stable than ConA (3) STI and LTI showed similar thermal stability. With respect to antigenicity, a greater thermal stability was observed for: (1) human ALA when it was autoclaved in water compared with bovine ALA (2) ConA when it was boiled or autoclaved in water, or under dry-heat treatment at 176℃ compared with peanut lectin (3) STI when it was autoclaved in PBS compared with LTI. In summary, allergens tended to be more thermally stable than nonallergenic proteins with respect to solubility, but there was no consistent trend in the relative thermal stability of these protein pairs regarding the antigenicity or the TM values. No correlation between thermal stability of the proteins and their allergenic potential was observed.ConA (3) STI and LTI showed similar thermal stability. With respect to antigenicity, a greater thermal stability was observed for: (1) human ALA when it was autoclaved in water compared with bovine ALA (2) ConA when it was boiled or autoclaved in water, or under dry-heat treatment at 176℃ compared with peanut lectin (3) STI when it was autoclaved in PBS compared with LTI. In summary, allergens tended to be more thermally stable than nonallergenic proteins with respect to solubility, but there was no consistent trend in the relative thermal stability of these protein pairs regarding the antigenicity or the TM values. No correlation between thermal stability of the proteins and their allergenic potential was observed.
M.S. in Food Safety and Technology, July 2015
Show less
- Title
- Delta Shelter (sequence unknown), IPRO 311 - Deliverables: IPRO 311 Final Report F09
- Creator
- Schug, Timothy, Bradley, Joshua, Cahan, Noah, Dobbin, Dan, Hallenbeck, Jeff, Jordan, Davyd, Strandquist, Brad, Dohm, Jacob, Hoffman, Kent, Lee, Woong-kyo, Waisath, Nathan
- Date
- 2009-12
- Description
-
The Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects...
Show moreThe Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects of the DTD house and their operations to create a more energy efficient fraternity. During the term, the team will consider possible alternatives to many issues including but not limited to: mechanical heating system, building envelope, thermal properties of buildings perimeter, roofing materials, air infiltration, ventilation, and occupancy trends.
Deliverables for IPRO 311: Delta Shelter for the fall 2009
Show less