Search results

Title: H1 LUBRICANT TRANSFER FROM A HYDRAULIC PISTON FILLER INTO A SEMI-SOLID FOOD SYSTEM
Creator: Chao, Pin-Chun
Date: 2020
Description: The machinery used to prepare, and process food products need grease and oil for the lubrication of machine parts. H1 (food-grade) lubricants...
Show moreThe machinery used to prepare, and process food products need grease and oil for the lubrication of machine parts. H1 (food-grade) lubricants commonly used in the food industry are regulated as indirect additives by the FDA because they may become components of food through transfer due to incidental contact between lubricants and foods. The maximum level of H1 lubricants currently permitted in foods is 10 ppm, which was derived from FDA data gathered over 50 years ago. Although modern equipment has been designed to minimize the transfer of lubricants during processing and packaging, incidental food contact can still occur resulting from leaks in lubrication systems or over-lubrication. However, there is a lack of data for the FDA to evaluate and determine whether safety issues in the aspect of chemical contamination should be addressed concerning the use of food-grade lubricants in the production of foods. This research was conducted to determine the transfer of an H1 lubricant (Petrol-Gel) into a semi-solid model food from a hydraulic piston filler during conventional operating conditions at 25°C and 50°C. Xanthan gum solutions with concentrations of 2.3% at 25°C and 1.9% at 50°C were used to simulate the viscosity of ketchup at 50°C (970 cP). Petrol-Gel H1 lubricant with a viscosity grade of 70 cSt at 40°C was selected and the aluminum (Al) in the lubricant was targeted as a tracer metal. Analytical methods to quantify Al in both Petrol-Gel and xanthan gum solutions were successfully developed and validated by using inductively coupled plasma – mass spectrometry (ICP-MS) combined with microwave-assisted acid digestion technique. The concentration of Al in the Petrol-Gel was determined to be 3103 ± 26 μg/g. A total of 1.35 g of Petrol-Gel was applied to four ring gaskets in the filler, and 50 g samples of xanthan gum solution were collected into a 100-mL polypropylene tube (DigiTube) with low leachable metals during 500 filling cycles (the full capacity of the piston filler hopper).Results showed that the concentrations of Petrol-Gel transferred into 2.3% xanthan gum solution at 25°C ranged from 1.6 to 63.5 μg/g. A total of 64.47 mg of the applied Petrol-Gel (1.35 g) was transferred into 25 liters of the solution. The average concentration of Petrol-Gel in 2.3% xanthan gum solution was calculated to be 2.84 μg/g, which was lower than the current regulatory limit of 10 ppm. In general, the transfer of Petrol-Gel during the first 100 filling cycles was higher at 50°C than at 25°C. The concentration of Petrol-Gel transferred into 1.9% xanthan gum solution at 50°C for the first 100 filling cycles ranged from 1.6 to 35.06 μg/g and was 6.37 μg/g on average. This research will help FDA to calculate more realistic limits of the H1 lubricants permissible in foods at modern food processing conditions as well as estimate consumer dietary exposure to these indirect food additives.
Show less

Title: WASTEWATER COLLECTION SYSTEM MODELING: TOWARDS AN INTEGRATED URBAN WATER AND ENERGY NETWORK
Creator: Wang, Xiaolong
Date: 2020
Description: Wastewater collection systems, among the oldest features of urban infrastructure, are typically dedicated to collect and transport wastewater...
Show moreWastewater collection systems, among the oldest features of urban infrastructure, are typically dedicated to collect and transport wastewater from users to water resource recovery facilities (WRRFs). Since the 1970s, wastewater engineers and scientists have come to understand that wastewater collection systems can bring benefits for urban water and energy networks, including thermal energy recovery and converting pipelines to bioreactors. However, there is little knowledge about the temporal and spatial changes of collection systems parameters that are important for these applications. Furthermore, the vast majority of existing studies of these applications have focused on laboratory or extremely small-scale systems; there have been few studies about beneficial applications associated with large-scale systems. The purpose of this study is to increase our understanding of how urban wastewater collection systems can bring potential benefits to urban water and energy systems. Models describing wastewater hydraulics, temperature, and water quality can provide valuable information to help evaluate thermal energy recovery and wastewater pretreatment feasibility. These kinds of models, and supporting data from a case study, were used in this study; sizes of the theoretical wastewater collection systems range from 2.6 L/s to 52 L/s, and the sample locations of the case study had flows ranging from 2.3 L/s to 24.5 L/s. A cost-benefit analysis of wastewater source heat pumps was used to evaluate the thermal energy recovery feasibility for different sizes of wastewater collection systems. Results show that the large collection system can support a large capacity heat pump system with a relatively low unit initial cost. Small collection systems have a slightly lower unit operating cost due to the relatively high wastewater temperature. When the heat pump system capacity design was based on the average available energy from the collection system, larger systems have lower payback times; the lowest payback time is about 3.5 years. The wastewater quality model was used to describe the dissolved oxygen (DO) and organic matter concentrations changes in the collection system. The model provides a framework for predicting pretreatment capability. Model results show that DO concentration is the limiting parameter for organic matter removal. Larger collection systems can provide more organic matter removal because they provide relatively longer retention times, and they offer the potential for greater DO reaeration. The model can also be used to identify environmental conditions in sewer pipelines, providing information for potential issues predication.
Show less

Title: COMPREHENSIVE ANALYSIS OF EXON SKIPPING EDITS WITHIN DYSTROPHIN D20:24 REGIONS
Creator: Niu, Xin
Date: 2020
Description: Exon skipping is a disease modifying therapy that operates at the RNA level. In this strategy, oligonucleotide analog drugs are used to...
Show moreExon skipping is a disease modifying therapy that operates at the RNA level. In this strategy, oligonucleotide analog drugs are used to specifically mask specific exons and prevent them from being included in the mature mRNA. Exon skipping can also be used to restore protein expression in cases where a genetic frameshift mutation has occurred, and this how it is applied to Duchenne muscular dystrophy, DMD. DMD most commonly arises as a result of large exonic deletions that juxtapose flanking exons of incompatible reading frame, which abolishes dystrophin protein expression. This loss leads to the pathology of the disease, which is severe, causing death generally in the second or third decade of life. Here, the primary aim of exon skipping is to restore the reading frame by skipping an exon adjacent to the patient’s original. While restoring some protein expression is good, how removing some region from the middle of protein affects its structure and function is unclear. Complicating this in this case is that the dystrophin gene is very large, containing 79 exons. Many different underlying deletions are knowns, and exon skipping can be applied in many ways. It has previously been shown that many exon-skip edits result in structural perturbations of varying degrees. Very few studies are focused on the protein biophysical study and it is still basically unclear whether and how such editing can be done to minimize such perturbations. In order to provide the solid evidences which prove the significant variation among those cases (especially for the clinically relevant cases) and better understanding the general principles of “what makes a good edit”, we examine a systematic and comprehensive panel of possible exon edits in a region of the dystrophin protein. The domain D20:24 of dystrophin rod region are selected for its entirety which is separated by hinge region (mostly random coiled structure) and addition of other STRs will not disrupt the structure stability. Also D20:24 regions lie in the Hot Spot region II (HS2) which holds the most number of DMD patients. During the comprehensive scan, we identify for the first time, exon edits that appear to maintain structural stability similar to wild-type protein and those clinically relevant edits. Then we figure out the factors that appear to be correlated with the degree of structural perturbation, such as the number of cooperative protein domains, as well as how the edited exon structure interacts with the protein domain structure. Our study is the first systematic and comprehensive scan for an entire multiple STRs domain. This would help us understand the protein nature of various exon skipping edits and provide useful target for clinical treatment. Also the knowledge we learned may be applied to produce more sophisticated CRISPR edits in the future work.
Show less

Title: DEVELOPMENT OF FULLY BIOCOMPATIBLE HYDROGEL NANOPARTICLE FORMULATIONS FOR CONTROLLED-RELEASE DELIVERY OF A WIDE VARIETY OF BIOMOLECULES
Creator: Borges, Fernando Tancredo Pereira
Date: 2020
Description: In recent years, our group has focused on the production of PEGDA-based hydrogel scaffolds and nanoparticles for drug delivery of small...
Show moreIn recent years, our group has focused on the production of PEGDA-based hydrogel scaffolds and nanoparticles for drug delivery of small molecules. However, with recent advances in modern therapeutic treatments, such as protein and genetic engineering, there is an increasing need for the development of drug delivery devices that would be able encapsulate larger molecules. Therefore, the goal of this thesis work was to develop a systematic way to produce fully biocompatible PEGDA-based hydrogel nanoparticle formulations that would be able to encapsulate any size molecule, ranging from small ionic molecules, to peptides and proteins, all the way to large nucleic acids, and deliver it in a controlled manner.The first of part of this work consisted of developing a stable and reproducible process for the production of hydrogel PPi-NPs. Initial studies were done in order to assess the influence of phosphate salts in the polymerization system and it was found that both monophosphate and polyphosphate salts significantly damper the NVP homo-polymerization kinetics, but do not affect the co-polymerization of NVP and PEGDA. Then, emulsion stability studies were done to determine whether phosphate salts affected the stability of the minimeulsion system used in the production of the nanoparticles. Cloud point measurements and droplet size screening measurements showed that by transitioning from a Pi-loaded emulsion system to a PPi-loaded emulsion system, the required HLB of the emulsion shifts by 1.5 points. Upon correction for that shift, a reproducible process for production of PPi-loaded nanoparticles was obtained. A parametric study was then performed to see how the different process parameters affected the different properties of the produced particles. The second part of the work consisted in developing a platform for encapsulation of large to very-large molecules within these hydrogel systems. A new set of equations was developed for better estimation of the interstitial space, available for encapsulation of molecules, of crosslinked polymers that used very high molecular weight crosslinkers and/or high amounts of crosslinker. Upon development of this new set of equations, hydrogel discs were made via photopolymerization in order to validate the equations. By introducing a third monomer, EGA, and varying the molecular weight and concentration of the crosslinker, hydrogels with a wide range of mesh dimensions from 25 to 700 were achieved. These gels were then used to encapsulate 4 different sample molecules of varying molecular weights and size. A new heuristic was developed for encapsulation of non-spherical molecules, where the aspect ratios of the molecule and of the polymer network are considered. By varying the size of the ratios of the dimensions of the hydrogel network to the dimensions of the molecule, significantly different release profiles of small molecules, peptides and oligonucleotides were obtained. Finally, in order to explore different administration routes, the process was transitioning into being fully biocompatible. The organic solvent previously used in the emulsion system was replaced by soybean oil and the surfactants were replaced by a food-grade surfactant, PGPR, to form Bio-Compatible Nanoparticle Emulsions (BCNEs). Qualitative release from the BCNEs was shown. A new method for quantitative measuring of release from BCNE was developed. Release from QK-BCNE was observed up to 46 days, which is unprecedented for sustained-release and revolutionary for the field. A BCNE spreadable ointment formulation was also developed.
Show less

Title: Development of Human Brain Atlas Resources
Creator: Qi, Xiaoxiao
Date: 2020
Description: Digital human brain atlases play an increasingly critical role and are widely used in neuroimaging studies such as developing biomarkers,...
Show moreDigital human brain atlases play an increasingly critical role and are widely used in neuroimaging studies such as developing biomarkers, training data for machine learning algorithms, functional connectivity analysis and so on. A brain atlas typically consists of brain templates of different imaging modalities that are representative of individual brains under study in a standard atlas space and semantic labels that delineate brain regions according to the characteristics of the underlying tissue.The IIT Human Brain Atlas project has developed the state-of-the-art diffusion tensor imaging (DTI) template, high angular resolution diffusion imaging (HARDI) template, and anatomical templates for the young adult brain in a standardized space. The probabilistic maps of gray matter (GM) labels and tissue segmentations were also constructed based on the anatomical information of the atlas. This thesis introduced an enhanced T1-weighted template that were developed by combining information from both diffusion and anatomical data. The GM labels and tissue segmentation maps in the standardized space were also improved. Existing white matter (WM) atlases typically lack specificity in terms of brain connectivity. A new approach named regionconnect was developed in this work based on precalculated average healthy adult brain connectivity information stored in standard space in a fashion that allows fast retrieval and integration. This thesis first generated and evaluated the white matter connectome of the IIT Human Brain Atlas v.5.0. Next, the new white matter connectome was used to develop multi-layer, connectivity-based labels for each white matter voxel of the atlas, consistent with the fact that each voxel may contain axons from multiple connections. The regionconnect algorithm was then developed to rapidly integrate information contained in the multi-layer labels across voxels of a white matter region and to generate a list of the most probable connections traversing that region. The regionconnect algorithm as well as the white matter tractogram and connectome, multi-layer, connectivity-based labels, and associated resources developed for the IIT Human Brain Atlas v.5.0 in this work are available at www.nitrc.org/projects/iit. Furthermore, it was well established that use of a young adult atlas in studies of older adults is inappropriate due to the age-related characteristic changes of the brain, resulting in an increasing demand of digital brain atlases for the older adults. To fulfill this demand, a function of fiber orientation distribution (fODF) template that is representative of older adults was developed in a standardized atlas space for studies of white matter of older adult human brains, which built a solid foundation for the development of the white matter resources for the older adults human brain atlas.
Show less

Title: AMPLIFICATION AND PURIFICATION OF RECOMBINANT PRO-DEATH BAXΔ2 PROTEINS FOR STRUCTURE ANALYSIS
Creator: Zhou, Yi
Date: 2020
Description: BaxΔ2 is an isoform of the pro-apoptotic Bax family of proteins, which is an important anti-cancer protein. BaxΔ2 behaves differently from...
Show moreBaxΔ2 is an isoform of the pro-apoptotic Bax family of proteins, which is an important anti-cancer protein. BaxΔ2 behaves differently from Baxα to induce apoptosis. The current computationally predicted model of BaxΔ2 is based on known Baxα structure, which is considered biased. Therefore, the elucidation of the BaxΔ2 crystal structure is critical. The goal of this project was to obtain a sufficient amount of purified recombinant Bax∆2 protein for crystallization. We cloned full-length BaxΔ2 fused with a poly-histidine tag on either N-terminus (His-Bax∆2) or C-terminus (Bax∆2-His) into an inducible bacterial expression vector. We found that His-Bax∆2 proteins were expressed better than Bax∆2-His, which totally inhibit host growth. However, the protein concentration of His-Bax∆2 was still too low to be detected by Coomassie blue staining. To increase His-Bax∆2 expression and avoid cytotoxicity, we further tested different bacterial host cells and applied the chaperone system. However, all attempts could not overcome Bax∆2 cytotoxicity and the protein expression levels were not high enough to be feasible for further large-scale purification. The mechanism underlying how Bax∆2 inhibits bacterial growth is still a mystery because Bax∆2 eukaryotic targets (mitochondria and caspases) do not exist in bacteria. Further experiments are required to explore the mechanism of Bax∆2 cytotoxicity in bacteria, so as to finally optimize and elevate the BaxΔ2 protein yields.
Show less

Title: Development of Microfluidic Platform to Study Insulin Resistance
Creator: Tanataweethum, Nida
Date: 2020
Description: Insulin resistance, a precursor for the development of type 2 diabetes (T2D), propagates among heterologous tissues through dysregulated lipid...
Show moreInsulin resistance, a precursor for the development of type 2 diabetes (T2D), propagates among heterologous tissues through dysregulated lipid flux, as well as dysregulated glucose production, and secretion of cytokines, adipokines and hepatokines. Although T2D is characterized by systemic insulin resistance, disruption of insulin signaling in the liver and adipose tissue recapitulates many aspects of T2D, including enhance endogenous glucose production as well as defects of insulin action. Mechanistic studies often aim to provide fundamental understanding of the observations from human and animal studies. Due to the complexity of animal models and the multifactorial character of T2D, there is a strong need to develop advanced experimental systems such as in vitro models that can enable the recapitulation of the complex physiology of the in vivo system and enable investigation of the pathological pathways as well as identify novel treatment options. The overall goal of this study was to develop insulin resistant models of adipose tissue and liver to study the metabolic function of each organ as well as to the organ-organ crosstalk. To accomplish this goal, four specific aims were pursued: (1) Establish adipose tissue on-a-chip to study the metabolic function of the adipocytes in flow culture; (2) Develop towards an insulin resistant adipose on-a-chip to study the metabolic function of adipocytes in setting of insulin resistance; (3) Develop insulin resistant liver on-a-chip to investigate the metabolic function of hepatocytes in setting of insulin resistance; (4) Develop adipose-liver on-a-chip in setting of insulin resistance to identify the metabolic interaction between organs.
Show less

Title: Exploiting contextual information for deep learning based object detection
Creator: Zhang, Chen
Date: 2020
Description: Object detection has long been an important research topic in computer vision area. It forms the basis of many applications. Despite the great...
Show moreObject detection has long been an important research topic in computer vision area. It forms the basis of many applications. Despite the great progress made in recent years, object detection is still a challenging task. One of the keys to improving the performance of object detection is to utilize the contextual information from the image itself or from a video sequence. Contextual information is defined as the interrelated condition in which something exists or occurs. In object detection, such interrelated condition can be related background/surroundings, support from image segmentation task, and the existence of the object in the temporal domain for video-based object detection. In this thesis, we propose multiple methods to exploit contextual information to improve the performance of object detection from images and videos.First, we focus on exploiting spatial contextual information in still-image based object detection, where each image is treated independently. Our research focuses on extracting contextual information using different approaches, which includes recurrent convolutional layer with feature concatenation (RCL-FC), 3-D recurrent neural networks (3-D RNN), and location-aware deformable convolution. Second, we focus on exploiting pixel-level contextual information from a related computer vision task, namely image segmentation. Our research focuses on applying a weakly-supervised auxiliary multi-label segmentation network to improve the performance of object detection without increasing the inference time. Finally, we focus on video object detection, where the temporal contextual information between video frames are exploited. Our first research involves modeling short-term temporal contextual information using optical flow and modeling long-term temporal contextual information using convLSTM. Another research focuses on creating a two-path convLSTM pyramid to handle multi-scale temporal contextual information for dealing with the change in object's scale. Our last work is the event-aware convLSTM that forces convLSTM to learn about the event that causes the performance to drop in a video sequence.
Show less

Title: IMAGE-ANALYSIS WITH FIJI PROGRAM ON PERIPHERAL BLOOD MONOCULAR CELLS AFTER CONSUMPTION OF HIGH-FAT, HIGH CARBOHYDRATE MEAL WITH OR WITHOUT ADDITION OF SPICES – A SINGLE-CENTER RANDOMIZED, BLINDED, PLACEBO-CONTROLLED, 4-ARM, 24HR ACUTE CROSSOVER STUDY
Creator: Tsai, Meng Fu
Date: 2020
Description: Chronic low-grade inflammation plays a significant role in developing various chronic diseases, such as cardiovascular disease and type II...
Show moreChronic low-grade inflammation plays a significant role in developing various chronic diseases, such as cardiovascular disease and type II diabetes. Western-type diets characterized by high-fat (saturated fat) and high-carbohydrate (HFHC) calories induce oxidative stress leading to inflammation. Polyphenol rich foods, such as berries, tea, and herbs and spices, have antioxidant properties. Spices have been shown to have anti-inflammatory effects in cell and animal studies; however, data are limited in humans. In the present study, we hypothesized that bioactive polyphenolic compounds in herbs and species would reduce diet-induced inflammation in overweight and obese (OW/OB) individuals. In a randomized, single-blinded 4-arm, 24-h, crossover clinical trial, sixteen OW/OB adults consumed an HFHC meal with and without three herbs and spices combinations, including Italian herbs (rosemary, basil, thyme, oregano, and parsley), cinnamon and pumpkin pie spice (cinnamon, ginger, nutmeg, and allspice) on four separate occasions at least three days apart. Markers of inflammation were assessed before and at 2, 4, 5.5, and 7 hours after meal consumption by tracking nuclear translocation of nuclear factor kappa B (NF-κB), a transcription factor in inflammatory signaling, in human peripheral blood monocular cells (PBMCs) and by measuring plasma interleukin-6 (IL-6), a pro-inflammatory cytokine. Nuclear translocation of NF-κB and the proportion of PBMCs activated were estimated through a new method leveraging machine-learning immunofluorescence image analysis. Metabolic markers were also investigated by RX Daytona automated clinical chemistry analyzer. Statistical analysis was conducted using a statistical package for the social sciences (SPSS) (α<0.05, significance). Preliminary results suggested the pumpkin pie spice mixture may improve inflammatory status. Compared to the control meal, the meal with pumpkin spice reduced nuclear translocation of NF-κB and proportion of PBMCs activation, p=0.007, and p=0.005, respectively. The addition of herbs/spices in HFHC meal had no apparent effect on postprandial glucose, insulin, or IL-6 concentrations compared to the control meal. Increased triglyceride concentrations were suggested after consuming the meal with Italian herbs compared to control (p=0.004). Overall, the results of this research suggested the potential of pumpkin pie spice as having anti-inflammatory effects in the context of a typical western-style eating pattern. A major component of this research was to develop a new method for assessing real-time inflammation in the human body. While the method and data are encouraging, upgrading image resolution and programming will be the subject of future research.
Show less

Title: ENLARGED PERIVASCULAR SPACES IN COMMUNITY-BASED OLDER ADULTS
Creator: Javierre Petit, Carles
Date: 2020
Description: Enlarged perivascular spaces (EPVS) have been associated with aging, increased stroke risk, decreased cognitive function and vascular dementia...
Show moreEnlarged perivascular spaces (EPVS) have been associated with aging, increased stroke risk, decreased cognitive function and vascular dementia. Furthermore, recent studies have investigated the links of EPVS with the glymphatic system (GS), since perivascular spaces are thought to play a major role as the main channels for clearance of interstitial solutes from the brain. However, the relationship of EPVS with age-related neuropathologies is not well understood. Therefore, more conclusive studies are needed to elucidate specific relationships between EPVS and neuropathologies. After demonstration of their neuropathologic correlates, detailed assessment of EPVS severity could provide as a potential biomarker for specific neuropathologies.In this dissertation, our focus was twofold: to develop a fully automatic EPVS segmentation model via deep learning with a set of guidelines for model optimization, and to evaluate both manual and automatic assessment of EPVS severity to investigate the neuropathologic correlates of EPVS, and their contribution to cognitive decline, by combining ex-vivo brain magnetic resonance imaging (MRI) and pathology (from autopsy) in a large community-based cohort of older adults. This project was structured as follows. First, a manual approach was used to assess neuropathologic and cognitive correlates of EPVS burden in a large dataset of community-dwelling older adults. MR images from each participant were rated using a semiquantitative 4-level rating scale, and a group of identified EPVS was histologically evaluated. Two groups of participants in descending order of average cognitive impairment were defined based and studied. Elasticnet regularized ordinal logistic regression was used to assess the neuropathologic correlates of EPVS burden in each group, and linear mixed effects models were used to investigate the associations of EPVS burden with cognitive decline. Second, a fully automatic EPVS segmentation model was implemented via deep learning (DL) using a small dataset of 10 manually segmented brain MR images. Multiple techniques were evaluated to optimize performance, mainly by implementing strategies to reduce model overfitting. The final segmentation model was evaluated in an independent test set and the performance was validated with an expert radiologist. Third, the DL segmentation model was used to segment and quantify EPVS. Quantified EPVS (qEPVS) were evaluated by combining ex-vivo MRI, pathology, and longitudinal cognitive evaluation. EPVS quantification allowed to study qEPVS both in the whole brain and regionally. Two different qEPVS metrics were studied. Elastic-net regularized linear regression was used to assess the neuropathologic correlates of qEPVS within each region of interest (ROI) under study, and linear mixed effects models were used to investigate the associations of qEPVS with cognitive decline. Finally, a preliminary study investigated the longitudinal associations of qEPVS with time. The DL segmentation model was re-trained using 4 in-vivo MR images. EPVS were segmented and quantified in a large longitudinal cohort where each participant was imaged at multiple timepoints. Factors that influenced segmentation performance across timepoints were evaluated, and linear mixed effects models controlling for these factors were used to investigate the associations of qEPVS with time.
Show less

Title: Unraveling the Factors Affecting Virus Adhesion to Food Contact Materials and Virus-Virus Interaction – A Nanoscopic Study
Creator: Guo, Ao
Date: 2020
Description: Food safety is a worldwide issue nowadays since pathogens cause diseases, even death. Human enteric viruses are a major cause of non-bacterial...
Show moreFood safety is a worldwide issue nowadays since pathogens cause diseases, even death. Human enteric viruses are a major cause of non-bacterial foodborne gastroenteritis. In the United States, they are the most life-threatening pathogenic agents for the foodborne illnesses. The fecal-oral route is responsible for the attachment and transmission of such foodborne pathogens, which lead to contamination of food-contact materials (FCMs) during food preparation, enhancing the risk of transmission. The interaction between viruses and contact surface is the source of virus adhesion.Due to lack of knowledge on virus adhesion to various FCMs, this thesis aims to reveal the key factors that mediate the virus-FCM and virus-virus interactions in order to effectively prevent virus infection or spread. The objectives are (1) to identify the physical and chemical features of a material surface that affect virus adhesion to determine an optimal FCM, (2) to reduce virus adhesion via nanofabrication of a material’s surface; (3) to investigate the effect of thermal inactivation (heat treatment) on virus-virus interaction toward the establishment of a non-culture-based infectivity assay for laboratory assessment of the effectiveness of disinfection methods. In this study, virus adhesion on various FCMs, including glass, polyvinyl chloride (PVC), polyethylene (PE) and graphite which have been widely used in food storages, food packages and utensil handling during food preparations, was investigated. Male-specific coliphage (MS2) was used as a virus surrogate of the highly infectious human enteric virus with similar physiochemical properties. Atomic force microscopy (AFM) was predominantly used in quantitative analyses of the strength of MS2 adhesion to various food-contact surfaces. Dynamic light scattering (DLS) was applied in MS2 dimensional analysis in aqueous suspension. Moreover, surface modification, such as nanofabrication, was employed to create controllable surface textures to reduce virus adhesion on FCM. Thermal inactivation was employed as a disinfection method. A comparative study was carried out to differentiate the active and inactivated MS2 in the virus-FCM and the virus-virus interactions. The results of this examination indicate that a material’s surface property, such as topography, hydrophobicity and surface charge, contributed to virus adhesion in aqueous phase at neutral pH (=7.4). Each surface feature played a distinctive role; however, the combined effect as well as the chemical signature of a virion’s surface determined the virus-FCM interaction. A delicate control of a surface’s chemical affinity and physical feature is expected to effectively reduce/interfere virus adhesion. It was also discovered that thermally inactivated MS2 particles became larger, softer, and more hydrophobic. These properties can be utilized in developing a non-culture-based assay to assess the effectiveness of disinfection methods for human enteric viruses, which can hardly be cultured in laboratory.
Show less

Title: BIG DATA AS A SERVICE WITH PRIVACY AND SECURITY
Creator: Hou, Jiahui
Date: 2020
Description: With the increase of data production sources like IoT devices (e.g., smartwatches, smartphones) and data from smart home (health sensor,...
Show moreWith the increase of data production sources like IoT devices (e.g., smartwatches, smartphones) and data from smart home (health sensor, energy sensors), truly mind-boggling amounts of data are generated daily. Building a big data as a service system, that combines big data technologies and cloud computing, will enhance the huge value of big data and tremendously boost the economic growth in various areas. Big data as a service has evolved into a booming market, but with the emergence of larger privacy and security challenges. Privacy and security concerns limit the development of big data as a service and increasingly become one of the main reasons why most data are not shared and well utilized. This dissertation aims to build a new incrementally deployable middleware for the current and future big data as a service eco-system in order to guarantee privacy and security. This middleware will retain privacy and security in the data querying and ensure privacy preservation in data analysis. In addition, emerging cloud computing contributes to providing valuable services associated with machine learning (ML) techniques. We consider privacy issues in both traditional queries and ML queries (i.e., ML classification) in this dissertation. The final goal is to design and develop a demonstrable system that can be deployed in the big data as a service system in order to guarantee the privacy of data/ service owners as well as users, enabling secure data analysis and services.Firstly, we consider a private dataset composed of a set of individuals, and the data is outsourced to a remote cloud server. We revisit the classic query auditing problem in the outsourcing scenario. Secondly, we study privacy preserving neural network classification where source data is randomly partitioned. Thirdly, we concern the privacy of confidential training dataset and models which are typically trained in a centralized cloud server but publicly accessible, \ie online ML-as-a-Service (MLaaS). Lastly, we consider the offline MLaaS systems. We design, implement, and evaluate a secure ML framework to enable MLaaS on clients' edge devices, where a ``encrypted'' ML models are stored locally.
Show less

Title: Investigating anti-biofilm and anti-persister activities of natural compounds and antimicrobial proteins
Creator: Jin, Xing
Date: 2020
Description: Bacterial biofilm formation is frequently involved in the development of chronic infectious diseases. Inhibiting biofilms is challenging due...
Show moreBacterial biofilm formation is frequently involved in the development of chronic infectious diseases. Inhibiting biofilms is challenging due to their tolerance against conventional antibiotics which are not effective to penetrating biofilm matrix to kill the cells residing in biofilms. Metabolically dormant cells known as persisters are also not eradicated by antibiotic treatment. Therefore, novel antimicrobial drugs that can kill non-growing persisters or inhibit biofilms are needed urgently. Here, we investigate the anti-biofilm and anti-persister activities of new drug candidates including plant extracts, fatty acids and colicins. We firstly screened 50 different plant extracts on enterohemorrhagic E. coli and Listeria monocytogenes, and identified Cancavalia ensiformis-derived lectin Concanavalin A (ConA) inhibits biofilm formation of enterohemorrhagic E. coli and Listeria monocytogenes by binding to carbohydrates on bacterial cell surface. Biofilm results support that ConA lectin can be applied for developing anti-adherent and anti-biofilm agents to control biofilms. Also, fatty acids may be promising candidates as anti-persister or anti-biofilm agents, because some fatty acids exhibit antimicrobial effects. We screened a fatty acid library consisting of 65 different fatty acid molecules for altered persister formation. We found that undecanoic acid, lauric acid, and N-tridecanoic acid inhibited E. coli persister cell formation including enterohemorrhagic E. coli EDL933. These fatty acids were all medium chain saturated forms. Furthermore, the fatty acids repressed EHEC biofilm formation (for example, by 8-fold for lauric acid) without having antimicrobial activity. This study demonstrates that medium chain saturated fatty acids can serve as anti-persister and anti-biofilm agents that may be applied to treat bacterial infections. Colicins, a type of antimicrobial bacteriocins, are considered as a viable alternative of conventional antibiotics due to their unique cell killing mechanisms that can damage cells by pore-forming on the cell membrane, nuclease activity, and cell wall synthesis inhibition. In this study, we utilized cell-free protein synthesis to produce colicins with different modes of action. We optimized the production yield and activity of colicins in cell-free system. Also, we tested effect of cell-free produced colicins on persister cell formation and biofilm formation. We illustrated that colicins kill persister cells and biofilm cells. Moreover, colicins produced from the engineered probiotic E. coli cells, which can be used as a living medicine, specifically and significantly eradicate target biofilms without affecting other bacterial population. Colicins have great potential to be an antibiotic alternative, and engineered probiotic E. coli is a potential candidate for engineered bacterial therapeutics.
Show less

Title: DIAGNOSING AND TREATING ADHD: CLINICIAN CHARACTERISTICS, METHODS OF DIAGNOSIS, DIAGNOSTIC RATES, AND TREATMENT RECOMMENDATIONS
Creator: Haak, Christopher Luke
Date: 2019
Description: Attention-deficit/hyperactivity disorder (ADHD) is one of the top five most common referrals among all neuropsychologists (Sweet et al. 2015)...
Show moreAttention-deficit/hyperactivity disorder (ADHD) is one of the top five most common referrals among all neuropsychologists (Sweet et al. 2015) and continues to elicit public and professional concern about over-diagnosis in children (Sciutto & Eisenberg, 2007) and under-diagnosis in adults (Asheron et al., 2012; Kooji et al., 2010). In recent years, the prevalence of ADHD has increased (Polanczyk et al., 2007 & 2014, Thomas et al., 2015). It is unclear what is driving these changes though changes in criteria may be playing a role (van de Voort et al., 2014). Further, there has been little research on whether professional training, beliefs, and practice factors can influence the likelihood to diagnose ADHD. The purpose of this study was to examine the extent to which neuropsychologists’ professional characteristics, training, and beliefs about ADHD diagnosis and treatment influence their likelihood to diagnose ADHD. The study also evaluated whether there are differences in assessing and treating ADHD based upon the client population focus (child, lifespan, or adult) of neuropsychologists. Participants in this study were 106 neuropsychologists from across the United States and Canada who were recruited through neuropsychology listservs to participate in an online survey. Results indicated that population focus was associated with significant differences in approach to diagnosing and treating ADHD, with child- and lifespan-focused neuropsychologists reporting higher rates of ADHD diagnosis. Additionally, having a higher percent of clinical cases in which ADHD is a referral question and greater self-reported adherence to following full diagnostic criteria for making a diagnosis were associated with higher ADHD diagnostic rates, controlling for age, gender, ethnicity, and other professional characteristics. This study is among the first to examine specific clinician factors impacting diagnostic rates and its findings have several implications for practice and research.
Show less

Title: Systematic Serendipity: A Study in Discovering Anomalous Astrophysics
Creator: Giles, Daniel K
Date: 2020
Description: In the present era of large scale surveys, big data presents new challenges to the discovery process for anomalous data. Advances in astronomy...
Show moreIn the present era of large scale surveys, big data presents new challenges to the discovery process for anomalous data. Advances in astronomy are often driven by serendipitous discoveries. Such data can be indicative of systematic errors, extreme (or rare) forms of known phenomena, or most interestingly, truly novel phenomena which exhibit as-of-yet unobserved behaviors. As survey astronomy continues to grow, the size and complexity of astronomical databases will increase, and the ability of astronomers to manually scour data and make such discoveries decreases. In this work, we introduce a machine learning-based method to identify anomalies in large datasets to facilitate such discoveries, and apply this method to long cadence light curves from NASA's Kepler Mission. Our method clusters data based on density, identifying anomalies as data that lie outside of dense regions in a derived feature space. First we present a proof-of-concept case study and we test our method on four quarters of the Kepler long cadence light curves. We use Kepler's most notorious anomaly, Boyajian's Star (KIC 8462852), as a rare `ground truth' for testing outlier identification to verify that objects of genuine scientific interest are included among the identified anomalies. Additionally, we report the full list of identified anomalies for these quarters, and present a sample subset of identified outliers that includes unusual phenomena, objects that are rare in the Kepler field, and data artifacts. By identifying <4% of each quarter as outlying data, under 6k individual targets for the dataset used, we demonstrate that this anomaly detection method can create a more targeted approach in searching for rare and novel phenomena.We further present an outlier scoring methodology to provide a framework of prioritization of the most potentially interesting anomalies. We have developed a data mining method based on k-Nearest Neighbor distance in feature space to efficiently identify the most anomalous light curves. We test variations of this method including using principal components of the feature space, removing select features, the effect of the choice of k, and scoring to subset samples. We evaluate the performance of our scoring on known object classes and find that our scoring consistently scores rare (<1000) object classes higher than common classes, meaning that rarer objects are successfully prioritized over common objects. The most common class, categorized as miscellaneous stars without any major variability, and rotational variables compose well over two-thirds of the KIC, yet are considerably underrepresented in the top outliers. We have applied scoring to all long cadence light curves of quarters 1 to 17 of Kepler's prime mission and present outlier scores for all 2.8 million light curves for the roughly 200k objects.
Show less

Title: High-latitude plasma drift structuring from a first principles ionospheric model
Creator: Kim, Heejin
Date: 2020
Description: In the high-latitude ionosphere dense plasma formations called polar cap patches are sometimes observed. These patches are often associated...
Show moreIn the high-latitude ionosphere dense plasma formations called polar cap patches are sometimes observed. These patches are often associated with ionospheric scintillation, a rapid fluctuation in the amplitude and phase of a radio signal that degrades communications and navigation systems. Predicting polar cap patch movement across the polar cap is an important subject for enabling forecasting of the scintillation.Lagrangian coherent structures (LCSs) are ridges indicating regions of maximum fluid separation in a time-varying flow. In previous studies, the Ionosphere-Thermosphere Algorithm for Lagrangian Coherent Structures (ITALCS) predicted the location of LCSs. These LCSs were shown to constrain polar cap patch source and transport regions for flow assumed to due to $\vec{E} \times \vec{B}$ plasma drift. The LCSs were predicted based on an empirical model of the high-latitude electric field for $\vec{E}$. In this thesis, the LCSs are generated using the first principles ionospheric model SAMI3 (SAMI3 is Another Model of the Ionosphere) as the model for electric field. The work relies on an understanding of various magnetic coordinate systems in space science, and includes three different approaches for attempting to generate the $\vec{E} \times \vec{B}$ drift as the flow fields that are to input to ITALCS. Finally, a representative LCS result is obtained with SAMI3 and shown to be at the high latitudes on the dayside, similar to prior work, but spanning a shorter longitudinal range.
Show less

Title: Characterization of turbulent mixing near roadways based on measurements of short-term turbulence kinetic energy and traffic conditions
Creator: Hu, Zhice
Date: 2020
Description: Turbulence determines how vehicle emissions mix with the surrounding air and determine the distribution of pollutants on the roadway and...
Show moreTurbulence determines how vehicle emissions mix with the surrounding air and determine the distribution of pollutants on the roadway and downwind. 600 5-min near roadway simultaneous measurements (2016 to 2018) of turbulent kinetic energy (TKE), meteorological conditions, and traffic information (vehicle flow rate, density, and traffic mix (LDVs & HDVs) were used to characterize TKE. Short-term measurements (5 min.) were required to characterize the large variation in traffic flow rate that occurred in short time periods. Two roadways (Lakeshore Drive (LSD), Dan Ryan Expressway (DRE)) with distinctly different traffic composition (HDV%) and road configurations were selected for monitoring. Results indicate that variations in near-road wind speed (0.5 to 3.5 m s-1) had only a slight influence on TKE measurements. Background contributed 40% of the total measured TKE. The average dissipation rate traffic-induced TKE from on-road to near-road measurement was 90%. The average near roadway TKE (background subtracted) was 0.6 (m2 s-2) (0.2 st. dev) for LDVs only, and 0.8 (m2 s-2) (0.3 st. dev) for mixed fleet traffic flow (HDV averaged 8.4%). The increase in TKE was related to the increase in the HDV flow rate for free-flow traffic conditions but not for congestion conditions. TKE generated by individual HDVs was significantly higher than TKE generated from individual LDVs for free-flow traffic conditions. HDVs represent only a small fraction of the vehicle fleet mix (typical 1 to 10%) so that the overall effect of HDVs in changing vehicle fleet is difficult to quantify. However, the single HDV can induce near 11 times TKE than a single LDV in free-flow condition, which can validate the significant variation in the ensemble mean traffic-induced TKE under the same traffic fleet flow that is due to HDVs.
Show less

Title: APPLICATIONS OF INTEGRATED DESIGN METHODOLOGIES: HYBRID AUTOMATION OF DESIGN SEQUENCING AND ITS INFLUENCE ON COMPLEX DESIGN PROJECTS
Creator: Elshanshoury, Waleed Farouk Omar
Date: 2020
Description: After the early development of Sketchpad in 1963 by Ivan Sutherland at MIT, the first system permitted drawing geometries parametrically;...
Show moreAfter the early development of Sketchpad in 1963 by Ivan Sutherland at MIT, the first system permitted drawing geometries parametrically; computation and algorithm aided design have significantly influenced the design practice. Computation and AAD are design approaches in which the medium of expression is logic instead of geometry. These approaches raised the curtain to various utilities, including but not limited to form-finding, automation, optimization, and robotic fabrication. Computational design and algorithm aided design are becoming fundamental approaches in most design practices because of their capability to solve complex problems.This thesis begins with a timeline presenting the evolution in design derivers and manifests how designers considered ideal design throughout history. This timeline starts with architecture approaches in ancient times when beauty, durability, and functions were the first principles to identify good architecture. It ends with the creation of computational technologies, which affected the design process and its logic. It will also investigate relations between software engineering and building design, where both fields intertwine with each other in general methodologies.This research examines how computation can generate integrated design systems to approach city planning and architectural design. IDS employs data, forces, and algorithms to construct a design system instead of solid geometries. This system combines the different design processes and chronological phases in interconnected blocks. This approach manages big data and assists in decision-making using automation, optimization, and machine learning technologies.This paper examines existing precedents, applications, and design projects that utilize IDS, including form-finding, materials, and energy. It will establish how evaluation criteria, simulations, solution optimizations, and processes automation play a vital role in integrated design systems. IDS is a dynamic workflow centered on principles and consists of components and aiding tools. This research explores technological aiding tools for these systems that help increase design performance and efficiencies using voice commands and automated functions.
Show less

Title: Defense-in-Depth for Cyber-Secure Network Architectures of Industrial Control Systems
Creator: Arnold, David James
Date: 2024
Description: Digitization and modernization efforts have yielded greater efficiency, safety, and cost-savings for Industrial Control Systems (ICS). To...
Show moreDigitization and modernization efforts have yielded greater efficiency, safety, and cost-savings for Industrial Control Systems (ICS). To achieve these gains, the Internet of Things (IoT) has become an integral component of network infrastructures. However, integrating embedded devices expands the network footprint and softens cyberattack resilience. Additionally, legacy devices and improper security configurations are weak points for ICS networks. As a result, ICSs are a valuable target for hackers searching for monetary gains or planning to cause destruction and chaos. Furthermore, recent attacks demonstrate a heightened understanding of ICS network configurations within hacking communities. A Defense-in-Depth strategy is the solution to these threats, applying multiple security layers to detect, interrupt, and prevent cyber threats before they cause damage. Our solution detects threats by deploying an Enhanced Data Historian for Detecting Cyberattacks. By introducing Machine Learning (ML), we enhance cyberattack detection by fusing network traffic and sensor data. Two computing models are examined: 1) a distributed computing model and 2) a localized computing model. The distributed computing model is powered by Apache Spark, introducing redundancy for detecting cyberattacks. In contrast, the localized computing model relies on a network traffic visualization methodology for efficiently detecting cyberattacks with a Convolutional Neural Network. These applications are effective in detecting cyberattacks with nearly 100% accuracy. Next, we prevent eavesdropping by applying Homomorphic Encryption for Secure Computing. HE cryptosystems are a unique family of public key algorithms that permit operations on encrypted data without revealing the underlying information. Through the Microsoft SEAL implementation of the CKKS algorithm, we explored the challenges of introducing Homomorphic Encryption to real-world applications. Despite these challenges, we implemented two ML models: 1) a Neural Network and 2) Principal Component Analysis. Finally, we hinder attackers by integrating a Cyberattack Lockdown Network with Secure Ultrasonic Communication. When a cyberattack is detected, communication for safety-critical elements is redirected through an ultrasonic communication channel, establishing physical network segmentation with compromised devices. We present proof-of-concept work in transmitting video via ultrasonic communication over an Aluminum Rectangular Bar. Within industrial environments, existing piping infrastructure presents an optimal solution for cost-effectively preventing eavesdropping. The effectiveness of these solutions is discussed within the scope of the nuclear industry.
Show less

Title: Estimation of Platinum Oxide Degradation in Proton Exchange Membrane Fuel Cells
Creator: Ahmed, Niyaz Afnan
Date: 2024
Description: The performance and durability of Proton Exchange Membrane Fuel Cells (PEMFCs) can be significantly hampered due to the degradation of the...
Show moreThe performance and durability of Proton Exchange Membrane Fuel Cells (PEMFCs) can be significantly hampered due to the degradation of the platinum catalyst. The production of platinum oxide is a major cause of the degradation of the fuel cell system, negatively affecting its performance and durability. In order to predict and prevent this degradation, this research examines a novel method to estimate degradation due to platinum oxide formation and predict the level of platinum oxide coverage over time. Mechanisms of platinum oxide formation are outlined and two methods are compared for platinum oxide estimation. Linear regression and two Artificial Neural Network (ANN) models, including a Recurrent Neural Network (RNN) and Feed-forward Back Propagation Neural Network (FFBPNN), are compared for estimation. The estimation model takes into account the influence of cell temperature and relative humidity.Evaluation of relative errors (RE) and root mean square error (RMSE) illustrates the superior performance of RNN in contrast to GT-Suite and FFBPNN. However, both RNN and GT-Suite showcase an average error rate below 5% while the FFBPNN had a higher error rate of approximately 7%. The RMSE of RNN shows mostly less compared to FFBPNN and GT-Suite, however, at 50% training data, GT-Suite shows lowest RMSE. These findings indicate that GT-Suite can be a valuable tool for estimating platinum oxide in fuel cells with a relatively low RE, but the RNN model may be more suitable for real-time estimation of platinum oxide degradation in PEM fuel cells, due to its accurate predictions and shorter computational time. This comprehensive approach provides crucial insights for optimizing fuel cell efficiency and implementing effective maintenance strategies.
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of