Search results

Title: Stress-Induced Habitual Responding as a Maintenance Factor in Bulimia Nervosa Spectrum Disorders
Creator: Dougherty, Elizabeth Nash
Date: 2022
Description: Individuals with bulimia nervosa spectrum disorders often compulsively engage in binge eating and purging, despite life threatening...
Show moreIndividuals with bulimia nervosa spectrum disorders often compulsively engage in binge eating and purging, despite life threatening consequences. Little is known about factors that contribute to compulsivity in these conditions. The purpose of this study was to investigate whether stress and habitual control over bulimic behaviors play a role in maintaining symptoms in these disorders, using ecological momentary assessment. Women with bulimia nervosa spectrum disorders (N = 81) completed self-report baseline questionnaires and a 14-day EMA protocol which involved daily assessments of stress, negative affect, bulimic behaviors, and contextual antecedents to bulimic behaviors. The results indicated that baseline habitual control over binge eating and purging were not associated with global eating pathology or eating disorder-related clinical impairment. However, exploratory analyses revealed that habitual control over binge eating and purging were associated with more frequent engagement in these behaviors during the previous four weeks. Neither stress appraisal nor stressor frequency were associated with habitual control over bulimic behavior during the EMA period. In terms of affect trajectories surrounding bulimic behaviors, negative affect increased in the hours leading up to these behaviors, decreased in the hours following these behaviors, and was higher immediately after these behaviors compared to before. Habitual control over binge eating and purging did not moderate temporal relations between negative affect and bulimic behaviors during the EMA period. Overall, the findings suggest that habit may play a role in maintaining binge eating and purging.
Show less

Title: ENGAGEMENT FRAMEWORK FOR SERIOUS THERAPEUTIC GAMES FOR HEALTH
Creator: Damarjian, Alex G.
Date: 2022
Description: The conventional treatment of amblyopia in pediatric patients routinely experience low patient compliance due toits limitations. Therapeutic...
Show moreThe conventional treatment of amblyopia in pediatric patients routinely experience low patient compliance due toits limitations. Therapeutic games that utilize VR technology have the potential to open new avenues of medical research and treatment. A review of the prevailing literature shows the effectiveness of VR based games for therapeutic applications and the potential for increased patient compliance. A strong component of the literature is grounded in the medical humanities, specifically the way in which thought patterns, cognitive development, and perceived social rejection affect patient engagement and treatment efficacy. In order to increase the effectiveness of therapeutic games and streamline their development, a new framework has been created using existing research into therapeutic games. This framework ensures that all therapeutic games meet certain criteria within ethics, immersion, active learning, universal accessibility, aesthetics, and medicine. When applied to game development, specifically virtual and extended reality games, it can be used to transform existing therapeutic or diagnostic models into games operating as health care tools. The result is a more effective, lower cost, more accessible treatment option with increased patient compliance and greater overall outcomes.
Show less

Title: Effect of heat treatment on microstructure and electrochemical behavior of laser powder bed fusion hydride- dehydride ti-6al-4v alloy
Creator: Delpazir, Melody Honardan
Date: 2022
Description: In powder bed additive manufacturing, feedstock and processing have an impact onfinal microstructure and properties of 3D-printed parts. While...
Show moreIn powder bed additive manufacturing, feedstock and processing have an impact onfinal microstructure and properties of 3D-printed parts. While numerous studies have evaluated 3D-printing of spherical powder, very limited research has been carried out on the processing of the non-spherical feedstock. This study is targeted specifically to the use of non-spherical Ti-6Al-4V powders in the laser powder bed fusion (L-PBF) process. Two different post-heat-treatments including hot isostatic pressing and solution treatment are applied. The microstructure evaluation, potentiodynamic polarization, and electrochemical impedance spectroscopy methods are used to characterize L-PBF processed and post- treated specimens. Though as-built part exhibits anisotropic microstructure containing acicular α′ martensite with trace amount of β phase, the heat-treated parts are composed of α+β in which length and thickness of the α-lath depends on the treatment. The below β transus heat treatment leads to the formation of a homogenized grain structures composed of α+β. Electrochemical results show that the below β transus heat-treatment had a slight positive effect on the improvement of corrosion resistivity (corrosion rate of 4.2×10-6 mmy- 1 , which is classified as an excellent ) compared to other conditions, which would be associated to the natural excellent corrosion resistance of Ti-6Al-4V alloy. This slight improvement can be ascribed by the slightly faster formation of a passive layer and its enhanced efficiency because of the presence of the fine-structured β phase in post heat- treated L-PBF processed Ti-6Al-4V alloy.
Show less

Title: WIDE BANDGAP FRACTIONAL POWER PROCESSING
Creator: Kundu, Aritra
Date: 2022
Description: The adoption of wide bandgap (WBG) power semiconductors can improve the performance of power converters at the expense of significantly higher...
Show moreThe adoption of wide bandgap (WBG) power semiconductors can improve the performance of power converters at the expense of significantly higher cost than Si at present time. In this thesis, an innovative Wide bandgap Fractional Power Processing (WFPP) design concept is introduced where silicon devices process the base power at a low switching frequency (2kHz or lower) while WBG devices are judiciously used to process only a fraction of the total power at a much higher frequency (tens of kHz). WFPP inverter is a design concept that splits the power processing into a low frequency Si base power processor and a high-frequency WBG fractional power processor. WBG devices are therefore judiciously used to process only a fraction of the total power to achieve both high-efficiency and lower cost than a full-WBG converter design. This thesis investigates an optimization strategy to minimize the total power loss while maintaining a reasonable THD and cost for a hybrid inverter design with comprehensive power loss analysis and calculation on fundamental and harmonics currents. Optimal selection of power sharing between the Si and WBG inverters and switching frequency are discussed in the thesis. The circulating current paths in topology with hybrid switching frequencies are also analyzed and presented in this thesis. Experimental results on a 9kW SiC/Si hybrid inverter prototype with isolated and non-isolated DC power supplies are presented to validate the design concept.
Show less

Title: STRUCTURE AND DYNAMICS OF MODIFIED NUCLEOSOMES UNDER EPIGENETIC REGULATION
Creator: Kohestani, Havva
Date: 2022
Description: Epigenetic regulations are critical in inducing heritable phenotype changes in biological systems without alternating their core genetic DNA...
Show moreEpigenetic regulations are critical in inducing heritable phenotype changes in biological systems without alternating their core genetic DNA sequences. In vivo, reversible epigenetic mechanisms engage various molecular structures from RNAs to larger proteins. The present thesis investigates the influence of epigenetic regulatory factors such as histone protein variants and small non-coding RNAs on the dynamics and structure of nucleosome core particles. Our results show that a histone substitution is an efficient tool in increasing or decreasing the exposure of DNA to post-translational modification (PTMs) factors or larger molecular assembly elements. Substitution of canonical H2A with H2A.B alters DNA-dimer interface resulting in increased breathing and accessibility of DNA. Replacement of canonical H3 with CENP-A variant impacts the overall core-DNA dynamics with flexibility of DNA entry/ exit sites and more rigid tetramer structure. Histone substitution also affects the micro to macro level molecular communication in the nucleosome system. The long-range correlated motions are weakened in H2A.B compared to canonical NCP. We observed a reduction in effective long-range DNA-DNA and DNA-core allosteric pathways in CENP-A NCP compared to canonical and Widom NCPs. Non-coding RNAs increase the tendency of the H3 tail histones to interact with DNA and induce the structural changes in the initial ideal B-DNA of NCP. Overall, the interaction of epigenetic regulatory factors in the form of protein or nucleic acids shifts the energetic and structural properties of the original nucleosome system. As a result, the chromatin structure is prepared to generate the proper biological response throughout spermatogenesis, chromosome segregation, or PTMs assembly.
Show less

Title: PREDICTING AND SIMULATING OUTDOOR THERMAL COMFORT-BASED HUMAN BEHAVIOR IN URBAN ENVIRONMENTS
Creator: Khan, Zahida Marzaban
Date: 2022
Description: Rapid urban growth due to a constant rise in world population has amplified the need for sustainable design development of cities. Human...
Show moreRapid urban growth due to a constant rise in world population has amplified the need for sustainable design development of cities. Human behavior, a key performance metric of sustainable design, can be rewarding for urban policies and city planning. Due to its complex nature, human behavior prediction and simulation are increasingly challenging. Complexity is associated with multiple factors, among which social and environmental factors are critical, especially in urban conditions with tall buildings that create unique microclimates. Human behavior in this study referred to human spatial behavior. This research hypothesized that the microclimatic variations at seasonal and diurnal levels affect people’s behavior in outdoor urban environments. Additionally, interdisciplinary crossover studies on novel methodologies to predict human behavior is becoming popular. Moreover, architects and urban designers are interested in human behavior simulation tools that can help them make informed design decisions through ‘what-if’ scenarios and assess their designs before execution. This doctoral research investigated the inter-relationship between Outdoor Thermal Comfort (OTC), human behavior, and urban morphology for Plazas in urban conditions with tall buildings and within a specific climate zone. The study focused on two overarching objectives: (1) to present a novel research methodology to investigate and predict OTC-based human behavior in urban conditions; and (2) to develop HuBeSIM - a human behavior simulation framework using an agent-based model (ABM) to simulate OTC integrated human behavior in outdoor spaces. Daley Plaza – an urban public space built-in 1965 in downtown Chicago — was used as (1) a case study to test the feasibility of this research methodology and (2) a pilot study to demonstrate the HuBeSIM framework. The outcome of this study shows a significant impact in the outdoor urban environments with design goals that use human behavior as a key performance indicator. The research contributes to the modeling and simulation of OTC-based human behavior in urban environments to nurture livable communities and sustainable cities. The first part of the dissertation presented a novel research methodology involving data collection through an on-site observational study for behavioral mapping, and microclimatic CFD simulations for OTC index - Physiological Equivalent Temperature (PET). The sample data consisted of two seasons, namely summer and fall, with more than 600 observations collected during the three-hour lunchtime period. The second part of the dissertation involved developing a Human Behavior SIMulation (HuBeSIM) framework in the popular computer aided design platform Rhino® and Grasshopper® (GH). This part integrated OTC using physics-based modeling and human behavior using mathematical agent-based modeling to develop a simulation framework for outdoor urban space design. The findings from the observational study revealed a moderate relationship between microclimate and human behavior in the fall, and a weak correlation in summer. The results showed that people’s behavior is not affected by PET values above 35°C. The proposed Human Behavior SIMulation framework has a high potential to develop into a comprehensive model by incorporating other behavioral factors. This study contributes to the sustainable built environment design that leads to the environmental, social, and economic upliftment of a city.
Show less

Title: The Feasibility of Double-Skin Façades to Provide Natural Ventilation in Tall Office Buildings
Creator: Kim, Yohan
Date: 2022
Description: Many tall office buildings (i.e., buildings of or taller than 656 ft (200 m)) are on the rise around the world. The energy efficiency and...
Show moreMany tall office buildings (i.e., buildings of or taller than 656 ft (200 m)) are on the rise around the world. The energy efficiency and healthy environment of tall office buildings has become an important concern, given the current environmental challenges and health considerations. Natural ventilation has proven to be an effective passive strategy in improving energy efficiency and providing healthy environments given environmental challenges. However, such a strategy has not been commonly adopted to tall office buildings that traditionally rely on single-skin façades (SSFs), due to the high wind pressure that creates excessive air velocities and occupant discomfort at upper floors. Double-skin façades (DSFs) can provide an opportunity to facilitate natural ventilation in tall office buildings, as the fundamental components such as the additional skin and openings create a buffer to regulate the direct impact of wind pressure and the airflow around the buildings. Wind-driven natural ventilation has not been fully studied in DSFs as most previous studies focused on the stack effect. Moreover, the studies assumed that the indoor spaces are mechanically ventilated without regard to airflow behavior between the air cavities and the indoor spaces. This study investigates the impact of modified multi-story type DSFs on indoor airflow in a 60-story, 780-foot (238 m) naturally ventilated tall office building under isothermal conditions. Therefore, the performance of wind effect related components was assessed based on the criteria (e.g., air velocity and airflow distribution), with respect to opening size, number of openings per floor, cavity depth, and cavity segmentation. Computational fluid dynamics (CFD) software was utilized to simulate outdoor airflow around the tall office building, and indoor airflow at various heights in case of various DSF configurations. Two sequential CFD simulations were carried out not only to reduce computational time, but also to comprehensively analyze the impact of DSFs responding to positive and negative wind pressures on indoor airflow behavior. The CFD simulation results indicate that the outer skin opening is the more influential parameter than the others on indoor airflow behavior. On the other hand, variations of inner skin opening size help improve the indoor airflow, with respect to the desired air velocity and distributions. Despite some air vortexes observed in the indoor spaces, cross ventilation can occur as positive pressure on the windward side and negative pressure on the other sides generate a productive pressure differential. The results also demonstrate that DSFs with smaller openings suitably reduce not only the impact of wind pressure, but also the concentration of high air velocity near the windows on the windward side, compared to single-skin façades. Further insight on indoor airflow behaviors depending on various DSF configurations leads to a better understanding of the DSF design strategies for effective natural ventilation in tall office buildings. This study aims to develop a performance-based DSF design guideline to assist architects in their design of DSF components in the early design stage.
Show less

Title: Efficacy of Organic Acid Treatments for the Reduction of Listeria Monocytogenes on Hard Boiled Eggs
Creator: Khouja, Bashayer
Date: 2022
Description: Ready-to-eat hard-boiled eggs (HBEs) are a popular and convenient choice for consumers and food servicers. Recentrecalls of hard-boiled eggs...
Show moreReady-to-eat hard-boiled eggs (HBEs) are a popular and convenient choice for consumers and food servicers. Recentrecalls of hard-boiled eggs have highlighted the susceptibility of contamination with Listeria monocytogenes. HBEs are generally treated with antibacterials to ensure the safety and quality of the product. While citric acid is often used, research has determined it is not effective in some situations; therefore, the assessment of additional organic acids is necessary. This study examined the efficacy of acetic, lactic, and malic acid on the reduction of L. monocytogenes on HBEs after a 24- hour treatment trials and 28 days storage trials. Fresh eggs were cooked in boiling water, peeled, and stored at 4°C for 24h before use. For treatment trials, HBEs were dip- inoculated with a 4-strain cocktail of rifampicin resistant L. monocytogenes, resulting in 8 log CFU/egg. Following air drying, hard-boiled eggs were treated at 5 or 25°C with 2% acetic, lactic, or malic acid. L monocytogenes populations were enumerated in intervals up to 24h by homogenization of HBEs with BLEB and cultivation on BHIrif. For pre- treatment storage trials, HBEs were first dip- inoculated with a rifampicin- resistant 4- strain L. monocytogenes cocktail for 20 min, resulting in 1 log CFU/egg, air dried for 10 min, followed by treatment with 2% acetic, lactic, or malic acid for 24 h at either 5 or 25°C. For post- treatment inoculation trials, HBEs were first soaked in 2% acetic, lactic, or malic acid for 24 h at either 5 or 25°C, air dried for 10 min, spot-inoculated at 1 log CFU/egg, and then dried for 20 min. All HBEs were individually stored in bags at 5°C for up to 28 days. The presence of L. monocytogenes was determined at intervals during storage by enrichment with BLEB on BHIrif and Brilliance Listeria Agar. Triplicate eggs were assessed for each timepoint, and three independent trials were conducted. Data were analyzed by Student’s T-test, ANOVA, and Fisher’s exact test, p≤0.05. The initial inoculation level of L. monocytogenes on HBEs was 8.27±0.37 log CFU/egg. After 24 h treatment, all L. monocytogenes populations were significantly reduced on HBEs. At 5°C, populations were reduced by 3.15±0.70, 3.46±0.02, and 4.78±0.23 log CFU/egg. Compared to 5°C, a significantly higher population reduction occurred with acetic and lactic acid when treatment occurred at 25°C. The inactivation of L. monocytogenes on HBEs for the storage trials was associated with the order of the contamination: pre-or post-the acid treatment. Prior storage, L. monocytogenes was detected on 100% of the HBEs. Malic acid pre-treatment was significantly effective in eliminating L. monocytogenes on HBEs at 5 and 25°C, while acetic acid was effective only at 5°C. All acids did not eliminate L. monocytogenes in the case of post-treatment contamination at any tested temperature. The results of this study aid in understanding the efficacy of organic acid treatments against L. monocytogenes on HBEs. Results are useful in the development of preventive controls and guidelines to ensure the safety of HBEs.
Show less

Title: ANALYTICAL APPROACH TO ESTIMATE ROTOR TEMPERATURE IN SWITCHED RELUCTANCE MOTOR
Creator: Koujalagi, Shweta Manohar
Date: 2022
Description: Motors contribute most of the loads. Motors find major applications in automobile industries, household appliances, industrial equipment, and...
Show moreMotors contribute most of the loads. Motors find major applications in automobile industries, household appliances, industrial equipment, and other areas. With the time, engineers and industries found some of the drawbacks or disadvantages of using induction motors in certain applications. They started developing other types of motors that are more efficient than existing ones. Among those, switched reluctance motor, referred as SRM is the one. SRMs are simple in construction, rugged and highly efficient motors.Even though SRM has higher efficiency, it still contribute some losses in the form of heat which will increase the temperature of SRM. If the temperature increases beyond certain limit, cable insulation fails, degrades rotor capability of aligning characteristics, damages bearings, etc. Therefore, it is important to understand the flow of heat in SRM. This thesis focuses on heat transfer analysis from stator coil to rotor of SRM using analytical method and numerical method such as finite element analysis from available coil temperature without using any kind of sensors. Analytical and FEA models are built separately to obtained rotor temperatures at various coil temperatures and rotor speeds. Finally, analytical results are validated with FEA model results. Therefore, once the rotor temperature is estimated accurately, model can be implemented in automotive and other industrial applications to continuously monitor the rotor temperature. It is important to monitor temperature to avoid damage of SRM by thermal effects.
Show less

Title: THE RELATIONSHIP BETWEEN SLUGGISH COGNITIVE TEMPO AND PERFORMANCE ON TASKS OF PROCESSING SPEED: INFLUENCE OF DEPRESSION
Creator: Kim, Jeong Hye
Date: 2021
Description: Sluggish cognitive tempo (SCT) is often associated with reported difficulties in various functional areas, including daily activities,...
Show moreSluggish cognitive tempo (SCT) is often associated with reported difficulties in various functional areas, including daily activities, emotional functioning, cognitive functioning, academic performance, and sleep. However, there are only a handful of research studies on SCT and neurocognitive functioning in adult populations, and the neuropsychological profile of SCT in adults is unclear.The purpose of this research is to investigate the effect of depression on the relationship between a self-reported measure of SCT and objective measures of SCT in adults by focusing on processing speed performance. The result of this research supports the previous notion that SCT is a novel and independent condition distinct from ADHD, and there are significantly positive relationships between symptoms of SCT and Inattention and Hyperactivity/Impulsivity. Furthermore, SCT and depression are also positively associated indicating the people who experience more symptoms of SCT report more symptoms of depression. However, results did not support the hypothesis that SCT significantly contribute to differences in performance on various types of neuropsychological tasks (WAIS PSI, Trail Making Test, and CPT-II Reaction Time) assessing processing speed after controlling for symptoms of ADHD (inattention and hyperactivity/impulsivity) and symptoms of depression. It is notable that the significant model beta weights for SCT in the final regression model suggests that the relationship between SCT and processing speed is worthy of additional investigation.
Show less

Title: MULTICRITERIA DECISION-MAKING METHODOLOGY WITH TRADEOFF ANALYSIS FOR TRANSPORTATION BUDGET ALLOCATION
Creator: Truong, Tung Quoc
Date: 2022
Description: Transportation agencies in the United States nowadays rely on tax dollars for maintaining surface transportation infrastructure, which mainly...
Show moreTransportation agencies in the United States nowadays rely on tax dollars for maintaining surface transportation infrastructure, which mainly comes from fuel tax. However, travel behaviors are changing every day. People and businesses demand better and safer roads. Yet, consumers travel in more fuel-efficient vehicles and buy less gas, which means less revenue for fixing aging roads and highways. Meanwhile, new construction and repair costs increase for our overburdened transportation systems. Transportation agencies, therefore, must use their limited funding more wisely to optimize the service performance and minimize risks (Li, 2018). The budget allocation problem in transportation is not an easy task. The consequences of an ineffective decision in allocating resources are multi-facet both in the short- and long-term, including degrading in the condition of transportation facilities, losing public trust, and increasing backlogs in maintenance and repair. Therefore, transportation agencies are seeking more robust and comprehensive data-driven strategies that take into account of agency’s strategic goals and regulatory requirements, user expectations, nature of the asset, availability of resources, and lifecycle cost analysis in determining the optimal allocation of resources and making the best use of available funds (Li and Sinha, 2004; Sinha and Labi, 2007). The proposed research aims to utilize the concept of multicriteria decision making coupled with a holistic asset management framework to support performance-based allocations of transportation budgets and help transportation agencies achieve the future vision of the nation’s strategic planning requirements to enable sustainable management of the system. A computational study for the real-world dataset obtained by a state Department of Transportation (DOT) is conducted using the proposed budget allocation method. The results from the computational study reveal that the proposed method can derive optimal decision solutions for transportation budget allocation problems and can be utilized by transportation agencies on different scales – urban and rural, in other sectors – public and private, to effectively manage the transportation infrastructure sustainably, by effectively spending transportation budget to maximize service performance and minimize operating costs.
Show less

Title: Towards Understanding the Microstructure and Mechanical Properties of Additively Manufactured Ni-base Superalloys
Creator: Tiparti, Dhruv Reddy
Date: 2022
Description: Nickel-base superalloy components such as turbine discs typically undergo numerous manufacturing steps that contribute to increasing the cost...
Show moreNickel-base superalloy components such as turbine discs typically undergo numerous manufacturing steps that contribute to increasing the cost and the waste of excess materials. With advent of fusion based additive of manufacturing (AM) techniques, such components with complex geometry can be fabricated with great efficiency. However due to characteristically high energy densities, fast cooling rate, and layer-by-layer building process associated with AM; Ni-base superalloys with higher temperature performance are difficult to be fabricated by AM due to susceptibility to composition related defect formation, which is further exacerbated by anisotropic grain structures induced by the large thermal gradients present. Crack-free material can be fabricated but, in most cases, issues such as an anisotropic microstructure will prevail, and the balance of mechanical properties achieved may not be suitable for the desired applications. Several strategies exist to mitigate the challenges posed by additive manufacturing via post-processing such as hot-isostatic processing, annealing heat treatments, application of grain refining inoculants, etc. All these strategies utilized to mitigate issues with AM of Ni-base superalloys still require further study to understand their effects on the microstructure and mechanical properties. This work aims to evaluate the use of inoculant particles, and novel heat treatments on the microstructure and mechanical properties of different superalloys. First, the effect of varying amounts of CoAl2O4 inoculant ranging from 0 to 2 wt.% on the microstructure evolution of Inconel 718(IN718) fabricated by selective laser melting (SLM) was evaluated. The findings from this study indicated that additions of CoAl2O4 only resulted in a minor degree of grain refinement with slight increase in anisotropy; in addition, a CoAl2O4 ¬content above 0.2 wt.% resulted in the formation of agglomerate inclusions; and that to effectively utilize CoAl2O4 as a grain refining inoculant, process parameters must be further optimized while considering the formation of agglomerates, and other defects. Second, the application of CoAl2¬O4 was extended towards the Direct Energy Deposition (DED) of IN718. Here findings indicated that due to the modification of the thermophysical properties of the melt pool by oxide addition, an earlier onset of large columnar extending across multiple layers occurred while counteracting conditions required for equiaxed grain formation; and these CoAl2O4 were also found to exhibit a potent Zenner pinning effect that maintained the as-built grain structure despite application of extreme high treatment condition of 1200oC for 4 hrs. Third, the tensile and fatigue properties of the DED IN718 with CoAl2O4 were evaluated. Here, it was found that the addition of CoAl2O4 leads to a minor increase in tensile strength in the as-built condition attributed primarily to the fine oxide dispersion; a more modest increase in tensile strength in the heat-treated condition due to grain refinement induced by retaining the as-built grain structure; and that despite the increase in tensile strength with CoAl2O4 a corresponding increase in fatigue life did not occur. Lastly, the processing of René 65 conducted by laser-powder bed fusion(L-PBF) was done and compared to the conventionally cast and wrought material. Here, the effect of the difference in processing route in conjunction with heat treatments was evaluated to understand the creep and stress relaxation behavior. It was found that L-PBF of René 65 led to an overall improved resistance to deformation by creep and relaxation mechanism.
Show less

Title: SYNTHESIS AND CHARACTERIZATION OF MG, NB, TI-DOPED LINIO2 CATHODE MATERIAL FOR LI-ION BATTERIES
Creator: Tian, Yiwen
Date: 2022
Description: In this project, the influence of several metal doping on the electrochemical properties of LiNiO2 materials was analyzed. The doping method...
Show moreIn this project, the influence of several metal doping on the electrochemical properties of LiNiO2 materials was analyzed. The doping method is aiming to improve the stability of the layered structure and inhibit the mixing of nickel and lithium by enhancing the structural stability of the layered material and replacing part of Ni with other metals in the process of intercalation/deintercalation, thereby promoting the cyclic performance and reversible capacity. The LiNiO2 powder doped with Nb, Ti and Mg is denoted as Li0.96Ni0.9Nb0.06Ti0.04Mg0.02O2 or, in short, metal-doped LiNiO2. The synthesis of the metal-doped LiNiO2 powder consists of mixing the lithium and nickel sources with various metal oxides and then being subjected to high-energy ball milling for 10 hours, followed by heating for 20 h in a metallic tube furnace at 680℃ with flowing oxygen atmosphere. The undoped LiNiO2 powder synthesized using the same process and conditions was compared with the doped LiNiO2 powder. In order to understand the doping mechanism, field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) were used to analyze the morphology, composition and crystal structure of the final product. Benefiting from the Mg, Nb, and Ti doping, the doped LiNiO2 exhibited a high reversible capacity of 130.56 mAh g-1, higher than that of undoped LiNiO2 (95.02 mAh g-1) under the 0.1C charge/discharge rate in the voltage window between 2.5 and 4.2 V. Further, the doped LiNiO2 has 86% of capacity retention over 100 cycles, better than undoped LiNiO2 (only 44% of capacity retention) under the 0.5C charge/discharge rate between 2.5 and 4.2 V.
Show less

Title: Choice-Distinguishing Colorings of Cartesian Products of Graphs
Creator: Tomlins, Christian James
Date: 2022
Description: A coloring $f: V(G)\rightarrow \mathbb N$ of a graph $G$ is said to be \emph{distinguishing} if no non-identity automorphism preserves every...
Show moreA coloring $f: V(G)\rightarrow \mathbb N$ of a graph $G$ is said to be \emph{distinguishing} if no non-identity automorphism preserves every vertex color. The distinguishing number, $D(G)$, of a graph $G$ is the smallest positive integer $k$ such that there exists a distinguishing coloring $f: V(G)\rightarrow [k]$ and was introduced by Albertson and Collins in their paper ``Symmetry Breaking in Graphs.'' By restricting what kinds of colorings are considered, many variations of distinguishing numbers have been studied. In this paper, we study proper list-colorings of graphs which are also distinguishing and investigate the choice-distinguishing number $\text{ch}_D(G)$ of a graph $G$. Primarily, we focus on the choice-distinguishing number of Cartesian products of graphs. We determine the exact value of $\text{ch}_D(G)$ for lattice graphs and prism graphs and provide an upper bound on the choice-distinguishing number of the Cartesian products of two relatively prime graphs, assuming a sufficient condition is satisfied. We use this result to bound the choice distinguishing number of toroidal grids and the Cartesian product of a tree with a clique. We conclude with a discussion on how, depending on the graphs $G$ and $H$, we may weaken the sufficient condition needed to bound $\text{ch}_D(G\square H)$.
Show less

Title: Synthesis and Photophysical Characterization of Novel Organic Triplet Donor–Acceptor Dyads for Light-Harvesting/Modulation Application
Creator: Yun, Young Ju
Date: 2022
Description: Donor–acceptor chromophoric systems (D–A) are important scaffolds for several light-harvesting/initiated processes and devices, including...
Show moreDonor–acceptor chromophoric systems (D–A) are important scaffolds for several light-harvesting/initiated processes and devices, including light-emitting diodes, photo-catalytic/redox systems, and photovoltaic cells. It has been hypothesized that for efficient photophysical processes (viz. energy/charge-transfer or excited-state interactions); it is ideal to tether the donor and acceptor chromophores into molecular dyads. To this end, I devised and synthesized several dyads by tethering an organic triplet energy donor and various polyaromatic chromophores (e.g., perylene derivatives and anthracene derivatives) onto a conjugated-/non-conjugated-linker (phenylene- and triptycene- linker, respectively). During the 4-5 years of my Ph.D., I synthesized a total of five (5) dyads: o–, p–3, and dyads 3–5. These systems were fully characterized using different spectroscopy tools/techniques. The spectroscopy investigations of the dyads have allowed me to decipher two important energy transfer pathways: through-bond and through-space with the phenylene linker and only through-space energy with the triptycene linker. Furthermore, the investigations led to the discovery that geometrical features such as face-to-face (co-facial) or slip-stacked interactions between the donor and acceptors chromophores might dictate the dynamic/kinetic of light-induced energy transfer in the dyads. Findings from my graduate research project paved the way for developing molecular engineering studies for light-harvesting/modulation applications.Subsequently, I was able to employ the dyads of my interest to achieve intramolecular and intermolecular triplet energy transfer (TEnT) triplet-triplet annihilation-based photon upconversion (TTA-PUC).
Show less

Title: DEFAULT RISK AND MOMENTUM PREMIUM
Creator: Zhang, Yi
Date: 2022
Description: Birge and Zhang (2018) reported that combining common factors models with functions of the default risk improves models' performance to...
Show moreBirge and Zhang (2018) reported that combining common factors models with functions of the default risk improves models' performance to explain stock returns. Default risk contains firm specific information and may help to explain momentum premium that compensates investors for the firm specific risk exposures. In this paper, we confirmed that the forward-looking measure of default risk, as proposed by Birge and Zhang (2018), seems to capture some pricing information in the momentum premium. This provides an alternative to explain the underlying risks associated with the momentum strategy.
Show less

Title: INTEGRATED DECISION SUPPORT SYSTEM FOR THE SELECTION AND IMPLEMENTATION OF DELAY ANALYSIS IN CONSTRUCTION PROJECTS
Creator: Yang, Juneseok
Date: 2022
Description: The goal of this study is to establish an objective, user-friendly, and reliable decision support system, called delay analysis selection and...
Show moreThe goal of this study is to establish an objective, user-friendly, and reliable decision support system, called delay analysis selection and implementation system (DASIS), which allows delay analysts and practitioners in the construction industry to select a type of delay analysis that is most appropriate for given conditions and to perform the selected type of delay analysis. DASIS integrates a delay analysis selection system (DASS) module and an implementation module (DAIS) that performs the type of delay analysis selected by DASS in construction projects.The model that operates the DASS module consists of (1) four different delay analysis approaches currently available to practitioners; (2) a set of 26 attributes that affect the selection of a type of delay analysis; (3) a case-base involving 3,776 cases described by these 26 attributes and their corresponding output values (i.e., the most appropriate delay analysis approach); (4) a set of 7 categories consisting of subsets of attributes; (5) the weights of the attributes and the categories; and (6) a spreadsheet designed in Microsoft Excel that performs the calculations involved in case-based similarity assessment. The implementation module is a computerized analytics and automation platform that performs the type of delay analysis selected by DASS. In developing the DASS module, 26 attributes that influence the selection of the most appropriate type of delay analysis were identified based on a thorough literature review and were organized in seven categories. These attributes were used to evaluate the four types of delay analysis (i.e., static, dynamic, additive, and subtractive analyses). Based on the results of this evaluation, a case-base of 3,776 cases was generated while considering the constraints of each category. The weights of the attributes and categories were determined by using several methods. To determine the best-fit between a target case (defined by its 26 attributes) and the 3,776 cases stored in the case-base were used to perform a case-based similarity assessment to calculate weighted case similarity scores, and to find the best-informed solution to the delay analysis type selection problem. In developing the DAIS module, the four types of delay analysis were coded in Microsoft Excel using macros programmed in Visual Basic for Applications (VBA). This automated tool performs the selected delay analysis by DASS. The fully integrated DASIS model finds the best-fit match between a target case and cases stored in the case-base by means of similarity assessment methods by using weighted case similarity scores, hence identifying the most appropriate type of delay analysis for use in the target case, performs the selected type of delay analysis and generates a report about the results of the delay analysis to the analyst instantaneously, allowing the contractual parties to settle the issues quickly. This study is the first attempt to establish an objective decision support system (DASS) to assist delay analysts by automating the selection of a type of delay analysis using combinations of well recognized and reliable attributes and similarity assessment techniques. In addition, DASS is immediately followed by DAIS in an integrated system (DASIS) that does not only do the selection of the most appropriate type of delay analysis, but that also implements the selected delay analysis, hence providing ease of use and high speed. A case study based on fictitious scenarios is presented to demonstrate and validate the research approach. The use of the entropy weight method to calculate the weights of the attributes can be considered a minor limitation of the study. Finally, DASIS can be reformulated as a web-based application that allows analysts to work online using ordinary browsers anywhere and anytime.
Show less

Title: MEASUREMENT OF ELECTRON NEUTRINO AND ANTINEUTRINO APPEARANCE WITH THE NOνA EXPERIMENT
Creator: Yu, Shiqi
Date: 2020
Description: As a long-baseline neutrino oscillation experiment, the NuMI Off-axis $\nu_e$ Appearance (NOvA) experiment aims at studying neutrino physics...
Show moreAs a long-baseline neutrino oscillation experiment, the NuMI Off-axis $\nu_e$ Appearance (NOvA) experiment aims at studying neutrino physics by measuring neutrino oscillation parameters using the neutrino flux from the Main Injector (NuMI) beam. It has two functionally identical detectors. The near detector is onsite at Fermi National Accelerator Laboratory. The far detector is 810 km away from the source of neutrinos and antineutrinos, at Ash River, Minnesota. At the near detector, muon neutrinos or antineutrinos, before significant oscillations take place, are used to correct the Monte Carlo simulation. At the far detector, the neutrino and antineutrino fluxes after significant oscillations have happened are measured and analyzed to study neutrino oscillation. The NOvA experiment is sensitive to the values of $\sin^2\theta_{23}$, $\Delta m^2_{32}$, and $\delta_{CP}$. The latest values from the NOvA 2020 analysis are as follows: $\sin^2\theta_{23}=0.57^{+0.03}_{-0.04}$, $\Delta m^2_{32}=(2.41\pm0.07)\times10^{-3}$ eV$^2$/c$^4$, and $\delta_{CP}=0.82\pi$ with a wide 1$\sigma$ interval of uncertainty. My study is focused on the neutrino oscillation analysis with NOvA, including detector light model tuning, particle classification with convolutional neural network, electron neutrino and antineutrino energy reconstruction, and oscillation background estimation. Most of my studies have been used in the latest NOvA publication and the NOvA 2020 analysis.
Show less

Title: Towards Trustworthy Multiagent and Machine Learning Systems
Creator: Xie, Shangyu
Date: 2022
Description: This dissertation aims to systematically research the "trustworthy" Multiagent and Machine Learning systems in the context of the Internet of...
Show moreThis dissertation aims to systematically research the "trustworthy" Multiagent and Machine Learning systems in the context of the Internet of Things (IoT) system, which mainly consists of two aspects: data privacy and robustness. Specifically, data privacy concerns about the protection of the data in one given system, i.e., the data identified to be sensitive or private cannot be disclosed directly to others; robustness refers to the ability of the system to defend/mitigate the potential attacks/threats, i.e., maintaining the stable and normal operation of one system.Starting from the smart grid, a representative multiagent system in the IoT, I demonstrate two works on improving data privacy and robustness in aspects of different applications, load balancing and energy trading, which integrates secure multiparty computation (SMC) protocols for normal computation to ensure data privacy. More significantly, the schemes can be readily extended to other applications in IoT, e.g., connected vehicles, mobile sensing systems.For the machine learning, I have studied two main areas, i.e., computer vision and natural language processing with the privacy and robustness correspondingly. I first present the comprehensive robustness evaluation study of the DNN-based video recognition systems with two novel proposed attacks in both test and training phase, i.e., adversarial and poisoning attacks. Besides, I also propose the adaptive defenses to fully evaluate such two attacks, which can thus further advance the robustness of system. I also propose the privacy evaluation for the language systems and show the practice to reveal and address the privacy risks in the language models. Finally, I demonstrate a private and efficient data computation framework with the cloud computing technology to provide more robust and private IoT systems.
Show less

Title: Deep Learning Methods For Wireless Networks Optimization
Creator: Zhang, Shuai
Date: 2022
Description: The resurgence of deep learning techniques has brought forth fundamental changes to how hard problems could be solved. It used to be held that...
Show moreThe resurgence of deep learning techniques has brought forth fundamental changes to how hard problems could be solved. It used to be held that the solutions to complex wireless network problems require accurate mathematical modeling of the network operation, but now the success of deep learning has shown that a data-driven method could generate powerful and useful representations such that the problem could be solved efficiently with surprisingly competent performance. Network researchers have recognized this and started to capitalize on the learning methods’ prowess. But most works follow the existing black-box learning paradigms without much accommodation to the nature and essence of the underlying network problems. This thesis focuses on a particular type of classical problem: multiple commodity flow scheduling in an interference-limited environment. Though it does not permit efficient exact algorithms due to its NP-hard complexity, we use it as an entry point to demonstrate from three angles how the learning-based methods can help improve the network performance. In the first part, we leverage the graphical neural network (GNN) techniques and propose a two-stage topology-aware machine learning framework, which trains a graph embedding unit and a link usage prediction module jointly to discover links that are likely to be used in optimal scheduling. The second part of the thesis is an attempt to find a learning method that has a closer algorithmic affinity to the traditional DCG method. We make use of reinforcement learning to incrementally generate a better partial solution such that a high quality solution may be found in a more efficient manner. As the third part of the research, we revisit the MCF problem from a novel viewpoint: instead of leaning on the neural networks to directly generate the good solutions, we use them to associate the current problem instance with historical ones that are similar in structure. These matched instances’ solutions offer a highly useful starting point to allow efficient discovery of the new instance’s solution.
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of

Rights