Search results

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Midterm Report Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Final Presentation Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: Disaster Recovery: DIY Home Building (semester?), IPRO 324: DIY Home Building IPRO 324 Project Plan Sp07
Creator: Chacko, Serena, Dakowisz, Dukasz, Diaz De Leon Orraca, Federico, Dilger, Andrew, Dolejs, Martina, Grosse, Christopher, Kim, Jung-jae, Kirsch, Joseph, Navarro, Jonathan, Peck, Edward, Ray, Monmayuri, Rios, Homero, Rogers, Eric, Rotella, James, Thompson, Sean T.
Date: 2007-05, 2007-05
Description: IPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new...
Show moreIPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new buildings. The objectives of this group are to continue the efforts made from the previous semester. This includes the creation of a manual illustrating how to build the design, design for handicap accessibility as a provision to the current design, to market this manual to a disaster relief organization that would be responsible for the distribution, to find a new client who would be interested in having this project built, and to find funding in order to build the design. Over the course of this semester, the team will be focusing on creating the manual and attempting to build the design at a site either in New Harmony, Louisana or Gulfport, Mississippi where potential clients are. The house at a bare minimum consists of a multipurpose room, a kitchen, and a bathroom; and will cost approximately $17,000. This is an affordable home/structure considering the cost of building a house now. The team is aware that some families are not fortunate enough to have a savings of $20,000 when these unexpected disasters occur. For this reason, it is an objective of the team to obtain funding.
Deliverables for IPRO 324: Disaster Recovery: DIY Home Building for the Spring 2007 semester
Show less

Title: Disaster Recovery: DIY Home Building (semester?), IPRO 324
Creator: Chacko, Serena, Dakowisz, Dukasz, Diaz De Leon Orraca, Federico, Dilger, Andrew, Dolejs, Martina, Grosse, Christopher, Kim, Jung-jae, Kirsch, Joseph, Navarro, Jonathan, Peck, Edward, Ray, Monmayuri, Rios, Homero, Rogers, Eric, Rotella, James, Thompson, Sean T.
Date: 2007-05, 2007-05
Description: IPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new...
Show moreIPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new buildings. The objectives of this group are to continue the efforts made from the previous semester. This includes the creation of a manual illustrating how to build the design, design for handicap accessibility as a provision to the current design, to market this manual to a disaster relief organization that would be responsible for the distribution, to find a new client who would be interested in having this project built, and to find funding in order to build the design. Over the course of this semester, the team will be focusing on creating the manual and attempting to build the design at a site either in New Harmony, Louisana or Gulfport, Mississippi where potential clients are. The house at a bare minimum consists of a multipurpose room, a kitchen, and a bathroom; and will cost approximately $17,000. This is an affordable home/structure considering the cost of building a house now. The team is aware that some families are not fortunate enough to have a savings of $20,000 when these unexpected disasters occur. For this reason, it is an objective of the team to obtain funding.
Deliverables for IPRO 324: Disaster Recovery: DIY Home Building for the Spring 2007 semester
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: Disaster Recovery: DIY Home Building (semester?), IPRO 324: DIY Home Building IPRO 324 IPRO Day Presentation Sp07
Creator: Chacko, Serena, Dakowisz, Dukasz, Diaz De Leon Orraca, Federico, Dilger, Andrew, Dolejs, Martina, Grosse, Christopher, Kim, Jung-jae, Kirsch, Joseph, Navarro, Jonathan, Peck, Edward, Ray, Monmayuri, Rios, Homero, Rogers, Eric, Rotella, James, Thompson, Sean T.
Date: 2007-05, 2007-05
Description: IPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new...
Show moreIPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new buildings. The objectives of this group are to continue the efforts made from the previous semester. This includes the creation of a manual illustrating how to build the design, design for handicap accessibility as a provision to the current design, to market this manual to a disaster relief organization that would be responsible for the distribution, to find a new client who would be interested in having this project built, and to find funding in order to build the design. Over the course of this semester, the team will be focusing on creating the manual and attempting to build the design at a site either in New Harmony, Louisana or Gulfport, Mississippi where potential clients are. The house at a bare minimum consists of a multipurpose room, a kitchen, and a bathroom; and will cost approximately $17,000. This is an affordable home/structure considering the cost of building a house now. The team is aware that some families are not fortunate enough to have a savings of $20,000 when these unexpected disasters occur. For this reason, it is an objective of the team to obtain funding.
Deliverables for IPRO 324: Disaster Recovery: DIY Home Building for the Spring 2007 semester
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Project Plan Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Poster1 Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Brochure Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: Disaster Recovery: DIY Home Building (semester?), IPRO 324: DIY Home Building IPRO 324 Midterm Report Sp07
Creator: Chacko, Serena, Dakowisz, Dukasz, Diaz De Leon Orraca, Federico, Dilger, Andrew, Dolejs, Martina, Grosse, Christopher, Kim, Jung-jae, Kirsch, Joseph, Navarro, Jonathan, Peck, Edward, Ray, Monmayuri, Rios, Homero, Rogers, Eric, Rotella, James, Thompson, Sean T.
Date: 2007-05, 2007-05
Description: IPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new...
Show moreIPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new buildings. The objectives of this group are to continue the efforts made from the previous semester. This includes the creation of a manual illustrating how to build the design, design for handicap accessibility as a provision to the current design, to market this manual to a disaster relief organization that would be responsible for the distribution, to find a new client who would be interested in having this project built, and to find funding in order to build the design. Over the course of this semester, the team will be focusing on creating the manual and attempting to build the design at a site either in New Harmony, Louisana or Gulfport, Mississippi where potential clients are. The house at a bare minimum consists of a multipurpose room, a kitchen, and a bathroom; and will cost approximately $17,000. This is an affordable home/structure considering the cost of building a house now. The team is aware that some families are not fortunate enough to have a savings of $20,000 when these unexpected disasters occur. For this reason, it is an objective of the team to obtain funding.
Deliverables for IPRO 324: Disaster Recovery: DIY Home Building for the Spring 2007 semester
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Ethics Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: Disaster Recovery: DIY Home Building (semester?), IPRO 324: DIY Home Building IPRO 324 Abstract Sp07
Creator: Chacko, Serena, Dakowisz, Dukasz, Diaz De Leon Orraca, Federico, Dilger, Andrew, Dolejs, Martina, Grosse, Christopher, Kim, Jung-jae, Kirsch, Joseph, Navarro, Jonathan, Peck, Edward, Ray, Monmayuri, Rios, Homero, Rogers, Eric, Rotella, James, Thompson, Sean T.
Date: 2007-05, 2007-05
Description: IPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new...
Show moreIPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new buildings. The objectives of this group are to continue the efforts made from the previous semester. This includes the creation of a manual illustrating how to build the design, design for handicap accessibility as a provision to the current design, to market this manual to a disaster relief organization that would be responsible for the distribution, to find a new client who would be interested in having this project built, and to find funding in order to build the design. Over the course of this semester, the team will be focusing on creating the manual and attempting to build the design at a site either in New Harmony, Louisana or Gulfport, Mississippi where potential clients are. The house at a bare minimum consists of a multipurpose room, a kitchen, and a bathroom; and will cost approximately $17,000. This is an affordable home/structure considering the cost of building a house now. The team is aware that some families are not fortunate enough to have a savings of $20,000 when these unexpected disasters occur. For this reason, it is an objective of the team to obtain funding.
Deliverables for IPRO 324: Disaster Recovery: DIY Home Building for the Spring 2007 semester
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Poster2 Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

Title: Disaster Recovery: DIY Home Building (semester?), IPRO 324: DIY Home Building IPRO 324 Final Report Sp07
Creator: Chacko, Serena, Dakowisz, Dukasz, Diaz De Leon Orraca, Federico, Dilger, Andrew, Dolejs, Martina, Grosse, Christopher, Kim, Jung-jae, Kirsch, Joseph, Navarro, Jonathan, Peck, Edward, Ray, Monmayuri, Rios, Homero, Rogers, Eric, Rotella, James, Thompson, Sean T.
Date: 2007-05, 2007-05
Description: IPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new...
Show moreIPRO 324, Disaster Recovery: Do-It-Yourself Home Building, is focused on designing a building manual to aid disaster victims in building new buildings. The objectives of this group are to continue the efforts made from the previous semester. This includes the creation of a manual illustrating how to build the design, design for handicap accessibility as a provision to the current design, to market this manual to a disaster relief organization that would be responsible for the distribution, to find a new client who would be interested in having this project built, and to find funding in order to build the design. Over the course of this semester, the team will be focusing on creating the manual and attempting to build the design at a site either in New Harmony, Louisana or Gulfport, Mississippi where potential clients are. The house at a bare minimum consists of a multipurpose room, a kitchen, and a bathroom; and will cost approximately $17,000. This is an affordable home/structure considering the cost of building a house now. The team is aware that some families are not fortunate enough to have a savings of $20,000 when these unexpected disasters occur. For this reason, it is an objective of the team to obtain funding.
Deliverables for IPRO 324: Disaster Recovery: DIY Home Building for the Spring 2007 semester
Show less

Title: Solid Fuel from Biomass for Cogeneration (Semester Unknown) IPRO 349: Solid Fuel from Biomass for Cogeneration IPRO 349 Final Report Sp08
Creator: Mikesell, Jonathan, Dlugosz, Anna, Heffernan, Joseph, James, Joshua, Vassi, Anna, Yap, Ying Bing, Yeap, Xin Yi, Chacko, Serena, Ruidera, Ryan, Stanfield, Terrance
Date: 2008, 2008-05
Description: Renewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from...
Show moreRenewable energy is one of the most important and widely researched topics today. It is classically defined as any form of energy coming from any naturally replenish-able source. This may include everything from solar to wind power, as well as biomass or biofuels. When considering biomass, or any (living or recently-dead) biological material, the chemical energy of the molecules is generally collected through combustion. The area of liquid fuels from biomass has especially gained much notoriety and support in recent years. This is due to the lower emissions and clean-burning nature of these fuels when compared to more traditional approaches, as well as the obvious renewable nature of the starting material. While vegetable oils or animal fats can be used as a replacement for diesel fuels, corn, switchgrass, or other grains are more widely used to produce ethanol for use in common combustion engines. Today’s E85 fuel is sold to customers with a chemical makeup of 85% ethanol and 15% gasoline. The use of solid biomass as a direct supplier of energy, however, is an area still left relatively unexplored in this growing field. In theory, and as preliminary research suggests, harvesting energy directly from solid biomass may be considerably more efficient than gathering it from its processed liquid counterpart. In fact, some studies suggest that the energy acquired from burning ethanol is up to 67% lower than is contained in the plant cellulose from which it is derived.[1] There are, however, several other factors besides energy projections to consider when looking at the economic and market viability of such an approach. For example, one of the main advantages of liquid fuels over solid is the ease of transportation and storage. Additionally, the feasibility of developing a whole new process of biomass collection and processing must be balanced with economic and logistical constraints. This includes not only careful analysis of energy and cost balances, but also in-depth examination of all equipment, manpower and environmental limitations. IPRO 349 was established to examine these (and many more) considerations in the viability of sold fuel from biomass. Specifically, we have narrowed the scope of our research to biomass derived from corn stover (leaves and stalk left in the ground after harvesting) within the state of Illinois. Illinois was chosen because it is currently the largest producer of corn in the nation.[2] Corn stover has been shown to have an energy content of 5,290 Btu/lb. wet, and 7,560 Btu/lb. dry.[2]With such an approach, it may be possible to utilize what would otherwise be considered “waste” to produce useable, renewable energy. For the purposes of this project, cogeneration, or the simultaneous generation of both electricity and useful heat will be examined.
Deliverables
Show less

repository.iit

Search the repository

Enabled Filters

Refine Results

Type

Date

Department

Subject

Creator

Rights