Search results

Title: Methods for Multi-User Broadband Wireless Channel Estimation
Creator: Tahat, Ashraf A.
Date: 2012-03-20, 2008-06-10
Description: A system and method of channel estimation for a multi-user broadband wireless channel estimation in multiple antenna receiver systems use a...
Show moreA system and method of channel estimation for a multi-user broadband wireless channel estimation in multiple antenna receiver systems use a specifically selected delay in the pilot symbol sequence portion of the transmission which is a multiple of the minimum Cyclic Prefix delay length. This insures that the time-frequency slot information bursts will always be separated in the time domain. A matched filter output in the receiver is formed by multiplying each pilot symbol by the conjugate of the training symbols of the first user. Estimation of the channel response may include three different versions of the efficient estimation calculations, namely Constrained Inverse Deconvolution, Iterative Low Complexity, and Extrapolated Matched Filter estimations. The first two methods do not require matrix multiplication (using only Fourier transforms), while the third method utilizes a smaller matrix multiplication than previously taught. Hardware considerations are also reduced due to the lack of a need for extensive matrix by matrix calculations.
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: Confinement in Porous Material by Driving Out Water and Substituting Sealent
Creator: Bridges, Jack E.
Date: 2009-05-08, 1990-02-13
Description: To provide confinement in a porous medium in the earth, a limited region of the porous medium is heated to drive substantially all of the free...
Show moreTo provide confinement in a porous medium in the earth, a limited region of the porous medium is heated to drive substantially all of the free water from open spaces of the medium in the region. After heating, liquid material is introduced into the open spaces in the medium, which liquid material will set into a substantially solid structure. The liquid material is then set in the open spaces to form a substantially solid structure in the medium in the region.
Sponsorship: IIT Research Institute
United States Patent
Show less

Title: Test and report of a modern ice plant
Creator: Heim, Karl, Fitch, Joseph E, Jones, Charles H, Hirschfeld, George
Date: 2009, 1909
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testreportofmode00heim
Thesis (B.S.)--Armour Institute of Technology

Title: Winding and Reeling Mechanism
Creator: Zenner, Raymond E.
Date: 2012-03-20, 1951-04-17
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Church & School Energy Efficiency and Financing Program (sequence unknown), IPRO 328 - Deliverables: IPRO 328 IPRO Day Presentation F09
Creator: Ciuffini, Kathryn, Kim, Ja Young, Knapczyk, Robert, Mckinley, Matthew, O'brien, Patrick, Maddamma, Todd, Schafer, Michael, Soderling, Philip, Wedster, Bonnie
Date: 2009-12
Description: The Fall 2009 IPRO 328 team envisions the development and ultimately execution of a volunteer program which would facilitate the...
Show moreThe Fall 2009 IPRO 328 team envisions the development and ultimately execution of a volunteer program which would facilitate the implementation of energy saving improvements in a church and/or parochial school within the surrounding neighborhoods of IIT campus.
Sponsorship: Vince Cushing of Clean Urban Energy
Deliverables for IPRO 328: Church & School Energy Efficiency and Financing Program for the fall 2009 semester
Show less

Title: THERMAL STABILITY OF FOOD ALLERGENS AND NONALLERGENIC PROTEINS: A COMPARATIVE STUDY
Creator: Wu, Yan
Date: 2015, 2015-07
Description: Thermal stability has been proposed as a criterion to assess the allergenic potential of genetically modified foods, but there is a lack of...
Show moreThermal stability has been proposed as a criterion to assess the allergenic potential of genetically modified foods, but there is a lack of information on the relative thermal stability of food allergens vs. nonallergenic proteins. This study compared the thermal stability of several paired food allergens and nonallergenic proteins by measuring the changes in their solubility, antigenicity and thermodynamic properties after thermal treatment using BCA total protein assay, inhibition ELISA assay, Differential Scanning Calorimetry and Far-UV Circular Dichroism Spectroscopy. The selected protein pairs included bovine α-lactalbumin (allergen) vs. human α-lactalbumin (nonallergen), peanut lectin (allergen) vs. concanavalin A (nonallergen), soybean trypsin inhibitor (allergen) vs. lima bean trypsin inhibitor (nonallergen). With respect to protein solubility, a greater thermal stability was observed for: (1) bovine α-lactalbumin (bovine ALA) when it was autoclaved in water compared with human α-lactalbumin (human ALA) (2) peanut lectin when it was boiled or autoclaved in water compared with concanavalin A (ConA) and (3) soybean trypsin inhibitor (STI) when it was boiled in water or PBS, or autoclaved in water compared with lima bean trypsin inhibitor (LTI). Regarding TM values determined by DSC: (1) bovine ALA was more thermally stable than human ALA under both dry-heat treatment and moist-heat treatment (2) ConA was more thermally stable than peanut lectin during moist-heat treatment, while a greater thermal stability was observed for peanut lectin when the protein was under dry-heat treatment (3) LTI was more thermally stable than STI during heating in water or under dry-heat treatment, while a greater thermal stability was observed for STI when the protein was heated in PBS. Based on CD analyses, (1) bovine ALA was more thermally stable than human ALA (2) peanut lectin was more thermally stable than ConA (3) STI and LTI showed similar thermal stability. With respect to antigenicity, a greater thermal stability was observed for: (1) human ALA when it was autoclaved in water compared with bovine ALA (2) ConA when it was boiled or autoclaved in water, or under dry-heat treatment at 176℃ compared with peanut lectin (3) STI when it was autoclaved in PBS compared with LTI. In summary, allergens tended to be more thermally stable than nonallergenic proteins with respect to solubility, but there was no consistent trend in the relative thermal stability of these protein pairs regarding the antigenicity or the TM values. No correlation between thermal stability of the proteins and their allergenic potential was observed.ConA (3) STI and LTI showed similar thermal stability. With respect to antigenicity, a greater thermal stability was observed for: (1) human ALA when it was autoclaved in water compared with bovine ALA (2) ConA when it was boiled or autoclaved in water, or under dry-heat treatment at 176℃ compared with peanut lectin (3) STI when it was autoclaved in PBS compared with LTI. In summary, allergens tended to be more thermally stable than nonallergenic proteins with respect to solubility, but there was no consistent trend in the relative thermal stability of these protein pairs regarding the antigenicity or the TM values. No correlation between thermal stability of the proteins and their allergenic potential was observed.
M.S. in Food Safety and Technology, July 2015
Show less

Title: Delta Shelter (sequence unknown), IPRO 311 - Deliverables: IPRO 311 Final Report F09
Creator: Schug, Timothy, Bradley, Joshua, Cahan, Noah, Dobbin, Dan, Hallenbeck, Jeff, Jordan, Davyd, Strandquist, Brad, Dohm, Jacob, Hoffman, Kent, Lee, Woong-kyo, Waisath, Nathan
Date: 2009-12
Description: The Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects...
Show moreThe Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects of the DTD house and their operations to create a more energy efficient fraternity. During the term, the team will consider possible alternatives to many issues including but not limited to: mechanical heating system, building envelope, thermal properties of buildings perimeter, roofing materials, air infiltration, ventilation, and occupancy trends.
Deliverables for IPRO 311: Delta Shelter for the fall 2009
Show less

Title: DEVELOPMENT OF AN EMBEDDED CONTROLLER FOR TWO QUADRANT OPERATION OF BLDC MOTORS IN AUTOMOTIVE APPLICATIONS
Creator: Liu, Yizhe
Date: 2011-07-06, 2011-07
Description: Due to growing concerns over the availability of non-renewable petroleum products and the increasing emphasis on protecting our environment...
Show moreDue to growing concerns over the availability of non-renewable petroleum products and the increasing emphasis on protecting our environment from green house gas emissions, plug-in hybrid electric vehicle and hybrid electric vehicles have been gaining increasing popularity over recent years. This has led to the design of advanced drive systems using different electric motors such as BLDC, PMSM, IM and SRM. An electric motor/generator requires controller that not only has a strong I/O control function, but also high speed signal processing ability for realizing real time control. Therefore, a DSP (Digital Signal Processors), which integrates flexible multiple PWM signal generator, high speed high precision ADC and encoder interface for motor speed and position feedback, is considered as one of the strongest controllers for electric motor control. Owing to a growing emphasis on identification, interference, and communication of security services of drive train in intelligent PHEVs and HEVs, a DSP can also be used to identify and isolate security issues in the integrity of the drive train in PHEVs and EVs. This thesis has two main contributions: a) it focuses on the development of an embedded controller using TMS320LF2812 DSP to realize two quadrant control of the BLDC; and b) it develops an automotive test bench to identify and investigate some potential security issues using the embedded controller’s eCAN communication function.
M.S. in Electrical Engineering, May 2011
Show less

Title: Bifilar Magnetic Recording System
Creator: Camras, Marvin
Date: 1949-09-13
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Detonator
Creator: Savitt, Jacob, Stresau, Richard H., Weber, John P.
Date: 1962-11-06
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Distributed Feed Fuel Cell Stack
Creator: Al-qattan, Ayman M., Chmielewski, Donald J., Al-hallaj, Said
Date: 2012-03-20, 2009-12-15
Description: A fuel cell having a distributed fuel feed in which the heat generation profile can be better controlled. Fuel channel stack and system...
Show moreA fuel cell having a distributed fuel feed in which the heat generation profile can be better controlled. Fuel channel stack and system efficiency improvements are achieved.
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: Hafnium Base Alloy (Boron)
Creator: Hill, Vernon L., Nichols, Harry R.
Date: 2009-04-27, 1971-11-23
Description: Hafnium tantalum alloy containing about 15 and about 35 weight percent tantalum, between about 0.03 and about 2.0 weight percent boron, and at...
Show moreHafnium tantalum alloy containing about 15 and about 35 weight percent tantalum, between about 0.03 and about 2.0 weight percent boron, and at least one additional alloying agent selected from chromium, silicon and aluminum.
Sponsorship: IIT Research Institute
United States Patent
Show less

Title: Signal Transducer Systems
Creator: Camras, Marvin
Date: 4/24/2009, 1970-04-14
Description: Sponsorship: IIT Research Institute
United States Patent

Title: Two-phase Heat Transport Device using Electrohydrodynamic Conduction Pumping
Creator: Yagoobi, Jamal Seyed, Pearson, Matthew R.
Date: 2013-10-30, 2013-10-29
Description: An electrohydrodynamic conduction liquid pumping system having a vessel configured to contain a liquid therein, a single pair or multi-pairs...
Show moreAn electrohydrodynamic conduction liquid pumping system having a vessel configured to contain a liquid therein, a single pair or multi-pairs of electrodes disposed in a circularly spaced apart relationship to each other inside the vessel and configured to be oriented in the liquid. A power supply is coupled to the electrodes and configured to generate electric fields in-between each electrode pair to induce a net radial pumping of the liquid. A heat source is provided to produce heat sufficient to boil and vaporize the liquid while non-vaporized liquid moving toward the heat source prevents over-heating of the heat source. A heat sink is configured to have a operating temperature below the vaporization temperature of the liquid so that contact of the vapor with the heat sink will condense the vapor into a liquid to replenish the liquid supply moving toward the heat source.
Sponsorship: Illinois Institute of Technology
United States Patent
Primary US Patent Classification 417/48
US Patent Classification 361/700
US Patent Classification 361/702
International Patent Classification F04B 37/00
International Patent Classification H05K 7/20
Show less

Title: Piston_PistonPinManufacturingProcessImprovementIPRO339MidTermPresentationSp11

Title: FORCED PERIODIC OPERATION OF TUBULAR REACTORS
Creator: Ozgulsen, F., Cinar, A.
Date: 1994-10
Publisher: PERGAMON-ELSEVIER SCIENCE LTD
Description: Forced periodic operation of tubular reactors can increase conversion and yield if proper operating conditions and forcing policies are...
Show moreForced periodic operation of tubular reactors can increase conversion and yield if proper operating conditions and forcing policies are selected. A numerical approach is proposed for computing the effects of periodic input forcing by a shooting algorithm. Such computational tools permit the assessment of the benefits of forced periodic operation of a specific reactor system and the identification of the ranges of operating conditions where forced periodic operation is beneficial. This information provides valuable insight for planning detailed experimental studies. Determining the influential input variables and bracketing the ranges of the operating conditions for improving reactor performance will reduce significantly the experiments needed for selecting the most favorable reactor operation policies. The application of the numerical algorithm is illustrated by assessing the benefits of forced periodic operation to a CO oxidation reactor model. The results reveal substantial improvement in performance with slow cycling in feed concentration.
Endnote format citation
Show less

Title: Method and Apparatus for Treating Materials
Creator: Schey, John A.
Date: 2009-04-27, 1971-02-09
Description: Sponsorship: IIT Research Institute
United States Patent

Title: Process to Allocate Channels in a Sectorized Cellular Network
Creator: Nguyen, Vincent Ahndzung, Wan, Peng-jun, Frieder, Ophir
Date: 2012-05-02, 2012-04-24
Description: The invention disclosed is a process to allocate channels in a sectorized cellular network. A system of allocating cellular frequencies ...
Show moreThe invention disclosed is a process to allocate channels in a sectorized cellular network. A system of allocating cellular frequencies (channels) to the sectors among the cells within a tile is disclosed which maximizes channel set usage within the tile while avoiding co-channel interference between cells. According to the present system, no infrastructure rebuild is required. The disclosed approach further supports all currently used cellular technology. By alternating and rotating the channel assignments across sectors, what is a seemingly locally poor algorithm utilizing additional local channels is actually a globally good algorithm which is efficient in terms of the total number of channels used owing to short reuse distance and low number of cell types.
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: STATISTICAL METHODS FOR LARGE-SCALE TRANSPORTATION NETWORK TRAFFIC VOLUME FORECASTING
Creator: Meng, Xiao
Date: 2012-11-27, 2012-12
Description: Forecasting is the procedure of making declarations about future events whose actual outcomes have not yet been observed. A lot of decisions...
Show moreForecasting is the procedure of making declarations about future events whose actual outcomes have not yet been observed. A lot of decisions are made based on predictions of future unknown events. Knowing the essence of forecasting, it is not hard to interpret what traffic volume forecasting is. Traffic volume forecasting is the process of estimating the number of vehicles that will be on a planned highway in the future. It plays important roles in different aspects of transportation and related field, such as highway level of service analysis, measure of effectiveness, highway improvement and expansion, geometric design and air quality analysis, etc. A good forecast is needed for decision making in future land use and transportation planning. City and county planners can provide useful information about land use planning and projected developments. County engineers may provide information about future county projects that may cause detours and changes in traffic patterns along a trunk highway. Highway designers need forecasted traffic volumes to ensure proper geometric designs. Since short term forecasting has been a hot topic on research, many statistical methods have been used, such as the mean, historical moving average, exponential smoothing, and autoregressive integrated moving average. Among them, Box Jenkins method (Autoregressive Integrated Moving Average) has been found as the best model on forecasting of time series data with seasonality and trend.
M.S. in Civil Engineering, December 2012
Show less

Title: DYNAMIC SIMULATION AND LOAD MODELING FOR VOLTAGE RECOVERY STUDIES WITH THREE-PHASE AND SINGLE-PHASE INDUCTION MOTORS
Creator: Zhang, Jingpei
Date: 2017, 2017-05
Description: Transient stability topics have been popular in modern power systems and time domain simulation provides an efficient evaluation for...
Show moreTransient stability topics have been popular in modern power systems and time domain simulation provides an efficient evaluation for correlative studies. So far, we have been working on developing advanced time-domain simulator TS3ph, which implements simulation on electromechanical level but with three-phase completed network model to enable unbalanced modeling and simulation. In this paper, modeling and development work of TS3ph are being introduced. Positive-sequence equivalent and three-phase based models, including static var compensator, governor and three-phase induction motor models, are built and validated to evaluate their dynamic behaviors in transient state. Moreover, research work on single phase induction motor model development, including important motor behaviors such as motor stalling, is also introduced in this paper for voltage collapse and recovery study. This is indeed the first time to apply such model on electromechanical simulator as well.
M.S. in Electrical Engineering, May 2017
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of

Rights