Search results
(1,181 - 1,200 of 1,234)
Pages
- Title
- Child Temperament, Attachment, and Loneliness: The Mediating Effects of Social Competence
- Creator
- Evans, Lindsey M
- Date
- 2021
- Description
-
Chronic loneliness is a risk factor associated with adverse psychological, physical, and academic outcomes. Converging evidence suggests that...
Show moreChronic loneliness is a risk factor associated with adverse psychological, physical, and academic outcomes. Converging evidence suggests that young children experience and can reliably report on their own loneliness. Due to the significant negative sequalae associated with childhood loneliness, it is critically important to examine risk factors for child loneliness. The aims of this study were two-fold: (a) to examine if temperament (i.e., negative affect, effortful control, and inhibitory control) and attachment security assessed at 4 years of age predict loneliness at age 6; and (b) to determine if social competence at age 5 mediates the relation between temperament and attachment security at age 4 and loneliness at age 6. Participants included a diverse sample of 796 4-year old children, about half of whom were male. At age 4, temperament was assessed with the Rothbart Child Behavior Questionnaire and three inhibitory control tasks, and attachment security was assessed with the Attachment Q-Sort. At age 5, the Social Skills Rating Scale was used to assess social competence, and, at age 6, loneliness was assessed with the Loneliness and Social Dissatisfaction Questionnaire. Results of hierarchical regression analyses indicated that lower levels of effortful control and inhibitory control at age 4 significantly predicted higher levels of loneliness at age 6. Also, lower levels of negative affect and higher levels of effortful control and attachment security at age 4 significantly predicted higher levels of social competence at age 5. However, social competence at age 5 did not predict loneliness at age 6. There was no evidence that social competence at age 5 mediated the relation between age 4 temperament, attachment security and age 6 loneliness. These findings reveal that early self-regulation is associated with later child-reported loneliness and that intervention for children who struggle with cognitive regulation may be effective in decreasing risk for later loneliness.
Show less
- Title
- Improvement and Validation of Multiyear Auroral Analysis to Categorize Scintillation Event Layer
- Creator
- English, Breanna R.
- Date
- 2022
- Description
-
Ionospheric irregularities scintillate electromagnetic waves, such as Global Positioning System (GPS) signals, as they pass through the...
Show moreIonospheric irregularities scintillate electromagnetic waves, such as Global Positioning System (GPS) signals, as they pass through the ionosphere, especially in auroral zones. A previous method was developed to determine which layer of the ionosphere these scintillation events occurred in by analyzing optical all sky images (ASI). The results of determining the ionospheric scattering layer using the ratio of 630 nm (red) intensity to 428 nm (blue) intensity were compared to a radar-based method of determining the scintillation layer, and it was found that the results disagreed. In this work, the ASI method is critically analyzed to identify possible errors or sensitivities in the original method that might resolve the discrepancy. This is done by improving and validating the nighttime auroral cloud detection method by comparing to National Oceanic and Atmospheric Administration (NOAA) satellite cloud data. Then a sensitivity analysis is performed on the ASI method to determine which parameters of the method the results are sensitive to. The keogram cloud detection method is improved by automating the selection of the keogram time points that are used to calculate a flat-field gain correction, and by calculating the flat field gain for each year rather than calculatingit once and using it for all years of the study. Keogram cloud detection using the coefficient of variation is verified by comparing the keogram results to true sky conditions based on NOAA cloud mask data, and using detection theory to determine the optimal coefficient of variation threshold. We find that the ideal keogram threshold was 0.37 producing a disagreement rate of 22.4%. The ASI image analysis criteria tested are: the ASI azimuth and elevation mapping files, the magnetic zenith limit, the number of pixels of the ASI that are being analyzed, the duration of the scintillation event that is analyzed, and the red-to-blue ratio threshold. It is found that only changing the red-to-blue ratio threshold has a significant effect on the ASI method, with the red-to-blue ratio that minimizes the number of misattributed layers found to be 1.43.
Show less
- Title
- TOPICDP – ENSURING DIFFERENTIAL PRIVACY FOR TOPIC MINING
- Creator
- Sharma, Jayashree
- Date
- 2021
- Description
-
Topic mining enables applications to recognize patterns and draw insights from text data, which can be used for applications such as sentiment...
Show moreTopic mining enables applications to recognize patterns and draw insights from text data, which can be used for applications such as sentiment analysis, building of recommender systems and classifiers. The text data can be a set of documents or emails or product feedback and reviews. Each document is analysed using probabilistic models and statistical analysis to discover patterns that reflects underlying topics.TopicDP is a differentially private topic mining technique, which injects well-calibrated Gaussian noise into the matrix output of the topic mining model generated from LDA algorithm. This method ensures differential privacy and good utility of the topic mining model. We derive smooth sensitivity for the Gaussian mechanism via sensitivity sampling, which resses the major challenges of high sensitivity in case of topic mining for differential privacy. Furthermore, we theoretically prove the differential privacy guarantee and utility error bounds of TopicDP. Finally, we conduct extensive experiments on two real-word text datasets (Enron email and Amazon Product Reviews), and the experimental results demonstrate that TopicDP can generate better privacy preserving performance for topic mining as compared against other state-of-the-art differential privacy mechanisms.
Show less
- Title
- PARENTAL RELATIONSHIP FACTORS, ACADEMIC EXPECTATIONS, AND MENTAL HEALTH OUTCOMES IN INDIVIDUALS WITH ADHD
- Creator
- Small, Eva E.
- Date
- 2022
- Description
-
Individuals with Attention Deficit Hyperactivity Disorder (ADHD) are at a higher risk for developing comorbid psychological conditions...
Show moreIndividuals with Attention Deficit Hyperactivity Disorder (ADHD) are at a higher risk for developing comorbid psychological conditions including depression and anxiety by the time they reach adulthood. While there has been some research on potentially beneficial aspects of parent-child relationships that can help to improve the mental health of pediatric populations with ADHD, less work has been done to assess the long-term influence of the parent -child relationship in adults with ADHD. The purpose of this study was to add to previous research by utilizing the National Longitudinal Study of Adolescent to Adult Health (Add Health) to investigate how parenting relationship and family factors (i.e., parental warmth, behavioral autonomy, family cohesion, and parental academic expectations) predict symptoms of stress and depression in adults with ADHD. Using data from Waves I, III, and IV of the Add Health study, analyses examined whether positive parenting relationship factors were related to levels of depression symptoms and stress in a sample of participants with self-reported ADHD (N = 316). Results indicated that higher levels of family cohesion experienced in adolescence were associated with lower depression symptoms reported in adulthood, thus suggesting that family cohesion is a beneficial for individuals with ADHD. Future research should continue to examine the role that child-relationship factors can have on long term mental health outcomes in individuals with ADHD
Show less
- Title
- ELECTROSPUN SILKWORM SILK FIBROIN - INDOCYANINE GREEN BIOCOMPOSITE FIBERS: FABRICATION, CHARACTERIZATION AND APPLICATION TOWARDS HEMORRHAGE CONTROL
- Creator
- Siddiqua, Ayesha
- Date
- 2022
- Description
-
Silk fibroin (SF), a structural protein found in the Bombyx mori cocoons has gained attention in several biomedical applications as tissue...
Show moreSilk fibroin (SF), a structural protein found in the Bombyx mori cocoons has gained attention in several biomedical applications as tissue engineering scaffolds and wound dressings owing to its properties such as biocompatibility, water vapor permeability and biodegradability. Indocyanine Green (ICG) is an FDA approved tricarbocyanine dye used in medical diagnostics due to its unique photothermal and fluorescent properties. Electrospinning is a highly efficient, easy, and inexpensive technique used to generate nanometer to micrometer thick fibers. In this study, SF and ICG were co-spun to generate flexible microfibers with high surface area to volume ratios. Pure silk, SF-ICG (0.1%) and SF-ICG (0.4%) were chosen for the purpose of this study. Since, as-spun fibers are unstable in aqueous solutions, post treatment methods were explored to enhance the durability of the fibers and to minimize ICG leaching. It was found that ethanol vapor treatment (EVT) not only induced β-sheet formation in SF but also improved the SF-ICG interaction thereby reducing ICG leaching from the composite fibers. Ethanol vapor treated SF-ICG fibers showed less ICG leaching than liquid ethanol treated (LET) SF-ICG fibers indicating the efficacy of the EVT. The increase in SF solution viscosity with ICG concentration suggested a strong silk-ICG interaction which was further confirmed by DSC. The 1h water uptake and the three-day mass loss experiments indicated that the fibers are stable and highly absorbent material. Heat evolution was evaluated by measuring the temperature change in water of a fixed volume after irradiation with a 500 mW, 808 nm diode laser. The heat evolved by the flat fiber scaffolds was higher than the 3D fiber balls, indicating improved light penetration in the former. Pure silk produced negligible heat and it was used as a control. With 14.9 W/cm2 irradiation, the post-treated SF-ICG (0.4%) 3D fibrous ball of 2-3 mg dry weight, solidified a drop of bovine blood in 40 s. In contrast, a single layer fiber matrix required 3 min. to achieve the same clotting effect. Fibers folded into flat scaffolds were able to solidify a blood drop in 25 s. Pure silk fibers in all the cases showed negligible change after irradiation. The results suggest that a larger contact area of fibers is desirable for faster blood clotting, and EVT prompted better ICG retention in SF fibers. Based on the above results, SF-ICG (0.4%) fibers were utilized in a device developed to mimic blood flowing at a rate of 0.5 mL/h through a damaged blood vessel. It was found that irradiation of SF-ICG locally placed at the “damage” region effectively stopped “bleeding” whereas irradiated pure silk was unable to control the blood flow, which demonstrated the success of our SF-ICG fibers towards hemorrhage control.
Show less
- Title
- Toward an Extraordinary Ecotourism Destination on The Shoreline of Aseer Region, Kingdom Of Saudi Arabia
- Creator
- Saleh, Abdulmalik Mohammad S.
- Date
- 2022
- Description
-
Since the dawn of the Anthropocene epoch, human activities have been adversely influencing our globe and becoming a controversial phenomenon....
Show moreSince the dawn of the Anthropocene epoch, human activities have been adversely influencing our globe and becoming a controversial phenomenon. However, as a counterforce, multiple adoptions of sustainable green movements worldwide are continually attempting alternate resolutions to preserve nature. As the tourism industry grows, ecotourism, for instance, is a specific eco-friendly approach that asserts minimizing human impacts and conserving captivating nature, improving the livelihood of local communities, and involving interpretation and education. A demi-decade ago, Saudi Arabia’s 2030 vision (the post-oil plan) was launched to diversify its GDP and develop public service sectors such as tourism. This thesis investigates the relationship between architecture and the possibilities of ecotourism principles, besides the governmental program, under multiple tourism indicators along the untouched Aseer shoreline, which has valuable attractions and amenities; it is faced with several issues, including informal planning, limited infrastructure, and low-income community. We built a suggested project based on a collection of written materials on the area’s environmental and culturally diverse aspects and case studies; architecture-to-ecotourism is thriving, but there is still potential for methodological development. The thesis findings demonstrate that architecture can immensely contribute to sustainable development through the ecotourism concept and can have a tangible impact on the project. Simultaneously, architecture, through ecotourism, is successful by improving the economic aspect of the host societies, reducing environmental consequences, and strengthening heritage identity. This research needs further studies on the correlation, which remains highly debated, between architecture and ecotourism norms to sustain nature.
Show less
- Title
- Effect of heat treatment on microstructure and electrochemical behavior of laser powder bed fusion hydride- dehydride ti-6al-4v alloy
- Creator
- Delpazir, Melody Honardan
- Date
- 2022
- Description
-
In powder bed additive manufacturing, feedstock and processing have an impact onfinal microstructure and properties of 3D-printed parts. While...
Show moreIn powder bed additive manufacturing, feedstock and processing have an impact onfinal microstructure and properties of 3D-printed parts. While numerous studies have evaluated 3D-printing of spherical powder, very limited research has been carried out on the processing of the non-spherical feedstock. This study is targeted specifically to the use of non-spherical Ti-6Al-4V powders in the laser powder bed fusion (L-PBF) process. Two different post-heat-treatments including hot isostatic pressing and solution treatment are applied. The microstructure evaluation, potentiodynamic polarization, and electrochemical impedance spectroscopy methods are used to characterize L-PBF processed and post- treated specimens. Though as-built part exhibits anisotropic microstructure containing acicular α′ martensite with trace amount of β phase, the heat-treated parts are composed of α+β in which length and thickness of the α-lath depends on the treatment. The below β transus heat treatment leads to the formation of a homogenized grain structures composed of α+β. Electrochemical results show that the below β transus heat-treatment had a slight positive effect on the improvement of corrosion resistivity (corrosion rate of 4.2×10-6 mmy- 1 , which is classified as an excellent ) compared to other conditions, which would be associated to the natural excellent corrosion resistance of Ti-6Al-4V alloy. This slight improvement can be ascribed by the slightly faster formation of a passive layer and its enhanced efficiency because of the presence of the fine-structured β phase in post heat- treated L-PBF processed Ti-6Al-4V alloy.
Show less
- Title
- Keeping the Spark Alive: Examining Associations Between Technology Use For Cybersex, Health and Relationship Satisfaction In Long-Distance Relationships
- Creator
- Khan, Humza
- Date
- 2022
- Description
-
Background: Technology is important to many romantic relationships, especially long-distance relationships (LDR), insofar as technology can...
Show moreBackground: Technology is important to many romantic relationships, especially long-distance relationships (LDR), insofar as technology can minimize the impact of the lack of proximity that is characteristic to LDR. Cybersex, a specific use of technology within romantic relationships, is associated with increased relationship satisfaction among partners in proximal relationships. Cybersex also relates to health broadly, and to anxiety and depression specifically, with mixed associations. Despite LDR lending themselves to cybersex, associations between cybersex, relationship satisfaction, and health have not been studied in LDR. This study has three aims: (1) to provide the first descriptive data related to cybersex behavior, relationship satisfaction and health in LDR; (2) to examine associations between cybersex behaviors and relationship satisfaction, and cybersex and health in LDR; and, (3) to test whether biological sex moderates cybersex-relationship satisfaction and cybersex-health associations among those in LDR. We predicted that cybersex behaviors would relate positively to relationship satisfaction for both males and females, although we predicted males would report stronger associations than females. We predicted cybersex behaviors would relate positively to health for both males and females, although we predicted females would report weaker associations than males. Methods: Participants (N = 146; 18 years or older; English speaking; in LDR for 3+ months) completed a paid online survey on relational experiences and health/well-being. Cybersex behaviors were assessed through an internally created “sex and cybersex behaviors” scale. Relationship satisfaction was assessed via the Couples Satisfaction Index (CSI). Both broad health, and anxiety and depression, were assessed with the PROMIS-29. Correlations were assessed between key study variables. Regression analyses were used first to test associations between cybersex and relationship satisfaction, then cybersex and health, and finally, the moderation effect of biological sex in these associations. Results: The average member of our sample was White, college aged, had no children, a full-time undergraduate student and low SES. Correlation analyses show significant correlations between core study variables (relationship satisfaction, global health, cybersex behavior, depression & anxiety) at some level. Sex-level analyses show that when compared to males, females reported significantly higher average anxiety scores, and more texting sex behavior. Linear regressions established cybersex behavior as a negative predictor of global health and a positive predictor of depression and anxiety, but not relationship satisfaction. Moderation analyses indicated that biological sex moderated the cybersex behavior-global health association such that more cybersex behavior negatively predicted global health for males but not females. Discussion: These differences among sexes and health in LDR observed within our findings may be explained by the social role theory, in which females have worse health than males however, males having worse overall physical health than females may be due to a lack of copresence from their partner. In addition, females engaging in higher levels of texting cybersex may be related to sociocultural factors. Conclusion: Overall, our study contributes to the understanding of cybersex behavior, relationship satisfaction and health outcomes by among males and females in LDR. Our findings suggest that this sample of LDR females engage in more texting cybersex, have higher anxiety symptom severity, and have equal levels of relationship satisfaction.
Show less
- Title
- Efficacy of Organic Acid Treatments for the Reduction of Listeria Monocytogenes on Hard Boiled Eggs
- Creator
- Khouja, Bashayer
- Date
- 2022
- Description
-
Ready-to-eat hard-boiled eggs (HBEs) are a popular and convenient choice for consumers and food servicers. Recentrecalls of hard-boiled eggs...
Show moreReady-to-eat hard-boiled eggs (HBEs) are a popular and convenient choice for consumers and food servicers. Recentrecalls of hard-boiled eggs have highlighted the susceptibility of contamination with Listeria monocytogenes. HBEs are generally treated with antibacterials to ensure the safety and quality of the product. While citric acid is often used, research has determined it is not effective in some situations; therefore, the assessment of additional organic acids is necessary. This study examined the efficacy of acetic, lactic, and malic acid on the reduction of L. monocytogenes on HBEs after a 24- hour treatment trials and 28 days storage trials. Fresh eggs were cooked in boiling water, peeled, and stored at 4°C for 24h before use. For treatment trials, HBEs were dip- inoculated with a 4-strain cocktail of rifampicin resistant L. monocytogenes, resulting in 8 log CFU/egg. Following air drying, hard-boiled eggs were treated at 5 or 25°C with 2% acetic, lactic, or malic acid. L monocytogenes populations were enumerated in intervals up to 24h by homogenization of HBEs with BLEB and cultivation on BHIrif. For pre- treatment storage trials, HBEs were first dip- inoculated with a rifampicin- resistant 4- strain L. monocytogenes cocktail for 20 min, resulting in 1 log CFU/egg, air dried for 10 min, followed by treatment with 2% acetic, lactic, or malic acid for 24 h at either 5 or 25°C. For post- treatment inoculation trials, HBEs were first soaked in 2% acetic, lactic, or malic acid for 24 h at either 5 or 25°C, air dried for 10 min, spot-inoculated at 1 log CFU/egg, and then dried for 20 min. All HBEs were individually stored in bags at 5°C for up to 28 days. The presence of L. monocytogenes was determined at intervals during storage by enrichment with BLEB on BHIrif and Brilliance Listeria Agar. Triplicate eggs were assessed for each timepoint, and three independent trials were conducted. Data were analyzed by Student’s T-test, ANOVA, and Fisher’s exact test, p≤0.05. The initial inoculation level of L. monocytogenes on HBEs was 8.27±0.37 log CFU/egg. After 24 h treatment, all L. monocytogenes populations were significantly reduced on HBEs. At 5°C, populations were reduced by 3.15±0.70, 3.46±0.02, and 4.78±0.23 log CFU/egg. Compared to 5°C, a significantly higher population reduction occurred with acetic and lactic acid when treatment occurred at 25°C. The inactivation of L. monocytogenes on HBEs for the storage trials was associated with the order of the contamination: pre-or post-the acid treatment. Prior storage, L. monocytogenes was detected on 100% of the HBEs. Malic acid pre-treatment was significantly effective in eliminating L. monocytogenes on HBEs at 5 and 25°C, while acetic acid was effective only at 5°C. All acids did not eliminate L. monocytogenes in the case of post-treatment contamination at any tested temperature. The results of this study aid in understanding the efficacy of organic acid treatments against L. monocytogenes on HBEs. Results are useful in the development of preventive controls and guidelines to ensure the safety of HBEs.
Show less
- Title
- ANALYTICAL APPROACH TO ESTIMATE ROTOR TEMPERATURE IN SWITCHED RELUCTANCE MOTOR
- Creator
- Koujalagi, Shweta Manohar
- Date
- 2022
- Description
-
Motors contribute most of the loads. Motors find major applications in automobile industries, household appliances, industrial equipment, and...
Show moreMotors contribute most of the loads. Motors find major applications in automobile industries, household appliances, industrial equipment, and other areas. With the time, engineers and industries found some of the drawbacks or disadvantages of using induction motors in certain applications. They started developing other types of motors that are more efficient than existing ones. Among those, switched reluctance motor, referred as SRM is the one. SRMs are simple in construction, rugged and highly efficient motors.Even though SRM has higher efficiency, it still contribute some losses in the form of heat which will increase the temperature of SRM. If the temperature increases beyond certain limit, cable insulation fails, degrades rotor capability of aligning characteristics, damages bearings, etc. Therefore, it is important to understand the flow of heat in SRM. This thesis focuses on heat transfer analysis from stator coil to rotor of SRM using analytical method and numerical method such as finite element analysis from available coil temperature without using any kind of sensors. Analytical and FEA models are built separately to obtained rotor temperatures at various coil temperatures and rotor speeds. Finally, analytical results are validated with FEA model results. Therefore, once the rotor temperature is estimated accurately, model can be implemented in automotive and other industrial applications to continuously monitor the rotor temperature. It is important to monitor temperature to avoid damage of SRM by thermal effects.
Show less
- Title
- SYNTHESIS AND CHARACTERIZATION OF MG, NB, TI-DOPED LINIO2 CATHODE MATERIAL FOR LI-ION BATTERIES
- Creator
- Tian, Yiwen
- Date
- 2022
- Description
-
In this project, the influence of several metal doping on the electrochemical properties of LiNiO2 materials was analyzed. The doping method...
Show moreIn this project, the influence of several metal doping on the electrochemical properties of LiNiO2 materials was analyzed. The doping method is aiming to improve the stability of the layered structure and inhibit the mixing of nickel and lithium by enhancing the structural stability of the layered material and replacing part of Ni with other metals in the process of intercalation/deintercalation, thereby promoting the cyclic performance and reversible capacity. The LiNiO2 powder doped with Nb, Ti and Mg is denoted as Li0.96Ni0.9Nb0.06Ti0.04Mg0.02O2 or, in short, metal-doped LiNiO2. The synthesis of the metal-doped LiNiO2 powder consists of mixing the lithium and nickel sources with various metal oxides and then being subjected to high-energy ball milling for 10 hours, followed by heating for 20 h in a metallic tube furnace at 680℃ with flowing oxygen atmosphere. The undoped LiNiO2 powder synthesized using the same process and conditions was compared with the doped LiNiO2 powder. In order to understand the doping mechanism, field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) were used to analyze the morphology, composition and crystal structure of the final product. Benefiting from the Mg, Nb, and Ti doping, the doped LiNiO2 exhibited a high reversible capacity of 130.56 mAh g-1, higher than that of undoped LiNiO2 (95.02 mAh g-1) under the 0.1C charge/discharge rate in the voltage window between 2.5 and 4.2 V. Further, the doped LiNiO2 has 86% of capacity retention over 100 cycles, better than undoped LiNiO2 (only 44% of capacity retention) under the 0.5C charge/discharge rate between 2.5 and 4.2 V.
Show less
- Title
- Child and Family Outcomes Associated with Specific Maryland ASD Waiver Services and Choice and Control as Mediators of These Outcomes
- Creator
- Turchmanovych-Hienkel, Nataliya
- Date
- 2022
- Description
-
Autism spectrum disorder (ASD) is a neurodevelopmental condition that affects 1in 44 children and is characterized by impairments in cognitive...
Show moreAutism spectrum disorder (ASD) is a neurodevelopmental condition that affects 1in 44 children and is characterized by impairments in cognitive, behavioral, and social domains of functioning. Literature suggests that ASD not only impacts the quality of life of the individuals diagnosed with this condition, but also has a negative impact on family quality of life (FQoL). Interventions and services offered through the Medicaid 1915(c) Home and Community-Based Services waiver programs can enhance child and family outcomes. The present study looked at one specific waiver program, the Maryland ASD waiver, and examined the frequency at which families received different waiver services and the associations between those service frequencies and child (i.e., academic performance, independent living skills, social communication and interaction skills, stereotypic and repetitive behavior, and aggressive behavior) and family (i.e., FQoL) outcomes, as well as explored whether the family’s perception of choice and control mediate these child and family outcomes. Results suggest that frequencies of some waiver services are associated with progress in some child outcomes, but not in FQoL. This study also suggests that the choice and control that families have over services do not mediate the relation between frequency of waiver services and child and family outcomes. Overall, results suggest that the Maryland ASD waiver program may help improve some domains of child functioning.
Show less
- Title
- Choice-Distinguishing Colorings of Cartesian Products of Graphs
- Creator
- Tomlins, Christian James
- Date
- 2022
- Description
-
A coloring $f: V(G)\rightarrow \mathbb N$ of a graph $G$ is said to be \emph{distinguishing} if no non-identity automorphism preserves every...
Show moreA coloring $f: V(G)\rightarrow \mathbb N$ of a graph $G$ is said to be \emph{distinguishing} if no non-identity automorphism preserves every vertex color. The distinguishing number, $D(G)$, of a graph $G$ is the smallest positive integer $k$ such that there exists a distinguishing coloring $f: V(G)\rightarrow [k]$ and was introduced by Albertson and Collins in their paper ``Symmetry Breaking in Graphs.'' By restricting what kinds of colorings are considered, many variations of distinguishing numbers have been studied. In this paper, we study proper list-colorings of graphs which are also distinguishing and investigate the choice-distinguishing number $\text{ch}_D(G)$ of a graph $G$. Primarily, we focus on the choice-distinguishing number of Cartesian products of graphs. We determine the exact value of $\text{ch}_D(G)$ for lattice graphs and prism graphs and provide an upper bound on the choice-distinguishing number of the Cartesian products of two relatively prime graphs, assuming a sufficient condition is satisfied. We use this result to bound the choice distinguishing number of toroidal grids and the Cartesian product of a tree with a clique. We conclude with a discussion on how, depending on the graphs $G$ and $H$, we may weaken the sufficient condition needed to bound $\text{ch}_D(G\square H)$.
Show less
- Title
- H1 LUBRICANT TRANSFER FROM A HYDRAULIC PISTON FILLER INTO A SEMI-SOLID FOOD SYSTEM
- Creator
- Chao, Pin-Chun
- Date
- 2020
- Description
-
The machinery used to prepare, and process food products need grease and oil for the lubrication of machine parts. H1 (food-grade) lubricants...
Show moreThe machinery used to prepare, and process food products need grease and oil for the lubrication of machine parts. H1 (food-grade) lubricants commonly used in the food industry are regulated as indirect additives by the FDA because they may become components of food through transfer due to incidental contact between lubricants and foods. The maximum level of H1 lubricants currently permitted in foods is 10 ppm, which was derived from FDA data gathered over 50 years ago. Although modern equipment has been designed to minimize the transfer of lubricants during processing and packaging, incidental food contact can still occur resulting from leaks in lubrication systems or over-lubrication. However, there is a lack of data for the FDA to evaluate and determine whether safety issues in the aspect of chemical contamination should be addressed concerning the use of food-grade lubricants in the production of foods. This research was conducted to determine the transfer of an H1 lubricant (Petrol-Gel) into a semi-solid model food from a hydraulic piston filler during conventional operating conditions at 25°C and 50°C. Xanthan gum solutions with concentrations of 2.3% at 25°C and 1.9% at 50°C were used to simulate the viscosity of ketchup at 50°C (970 cP). Petrol-Gel H1 lubricant with a viscosity grade of 70 cSt at 40°C was selected and the aluminum (Al) in the lubricant was targeted as a tracer metal. Analytical methods to quantify Al in both Petrol-Gel and xanthan gum solutions were successfully developed and validated by using inductively coupled plasma – mass spectrometry (ICP-MS) combined with microwave-assisted acid digestion technique. The concentration of Al in the Petrol-Gel was determined to be 3103 ± 26 μg/g. A total of 1.35 g of Petrol-Gel was applied to four ring gaskets in the filler, and 50 g samples of xanthan gum solution were collected into a 100-mL polypropylene tube (DigiTube) with low leachable metals during 500 filling cycles (the full capacity of the piston filler hopper).Results showed that the concentrations of Petrol-Gel transferred into 2.3% xanthan gum solution at 25°C ranged from 1.6 to 63.5 μg/g. A total of 64.47 mg of the applied Petrol-Gel (1.35 g) was transferred into 25 liters of the solution. The average concentration of Petrol-Gel in 2.3% xanthan gum solution was calculated to be 2.84 μg/g, which was lower than the current regulatory limit of 10 ppm. In general, the transfer of Petrol-Gel during the first 100 filling cycles was higher at 50°C than at 25°C. The concentration of Petrol-Gel transferred into 1.9% xanthan gum solution at 50°C for the first 100 filling cycles ranged from 1.6 to 35.06 μg/g and was 6.37 μg/g on average. This research will help FDA to calculate more realistic limits of the H1 lubricants permissible in foods at modern food processing conditions as well as estimate consumer dietary exposure to these indirect food additives.
Show less
- Title
- AMPLIFICATION AND PURIFICATION OF RECOMBINANT PRO-DEATH BAXΔ2 PROTEINS FOR STRUCTURE ANALYSIS
- Creator
- Zhou, Yi
- Date
- 2020
- Description
-
BaxΔ2 is an isoform of the pro-apoptotic Bax family of proteins, which is an important anti-cancer protein. BaxΔ2 behaves differently from...
Show moreBaxΔ2 is an isoform of the pro-apoptotic Bax family of proteins, which is an important anti-cancer protein. BaxΔ2 behaves differently from Baxα to induce apoptosis. The current computationally predicted model of BaxΔ2 is based on known Baxα structure, which is considered biased. Therefore, the elucidation of the BaxΔ2 crystal structure is critical. The goal of this project was to obtain a sufficient amount of purified recombinant Bax∆2 protein for crystallization. We cloned full-length BaxΔ2 fused with a poly-histidine tag on either N-terminus (His-Bax∆2) or C-terminus (Bax∆2-His) into an inducible bacterial expression vector. We found that His-Bax∆2 proteins were expressed better than Bax∆2-His, which totally inhibit host growth. However, the protein concentration of His-Bax∆2 was still too low to be detected by Coomassie blue staining. To increase His-Bax∆2 expression and avoid cytotoxicity, we further tested different bacterial host cells and applied the chaperone system. However, all attempts could not overcome Bax∆2 cytotoxicity and the protein expression levels were not high enough to be feasible for further large-scale purification. The mechanism underlying how Bax∆2 inhibits bacterial growth is still a mystery because Bax∆2 eukaryotic targets (mitochondria and caspases) do not exist in bacteria. Further experiments are required to explore the mechanism of Bax∆2 cytotoxicity in bacteria, so as to finally optimize and elevate the BaxΔ2 protein yields.
Show less
- Title
- IMAGE-ANALYSIS WITH FIJI PROGRAM ON PERIPHERAL BLOOD MONOCULAR CELLS AFTER CONSUMPTION OF HIGH-FAT, HIGH CARBOHYDRATE MEAL WITH OR WITHOUT ADDITION OF SPICES – A SINGLE-CENTER RANDOMIZED, BLINDED, PLACEBO-CONTROLLED, 4-ARM, 24HR ACUTE CROSSOVER STUDY
- Creator
- Tsai, Meng Fu
- Date
- 2020
- Description
-
Chronic low-grade inflammation plays a significant role in developing various chronic diseases, such as cardiovascular disease and type II...
Show moreChronic low-grade inflammation plays a significant role in developing various chronic diseases, such as cardiovascular disease and type II diabetes. Western-type diets characterized by high-fat (saturated fat) and high-carbohydrate (HFHC) calories induce oxidative stress leading to inflammation. Polyphenol rich foods, such as berries, tea, and herbs and spices, have antioxidant properties. Spices have been shown to have anti-inflammatory effects in cell and animal studies; however, data are limited in humans. In the present study, we hypothesized that bioactive polyphenolic compounds in herbs and species would reduce diet-induced inflammation in overweight and obese (OW/OB) individuals. In a randomized, single-blinded 4-arm, 24-h, crossover clinical trial, sixteen OW/OB adults consumed an HFHC meal with and without three herbs and spices combinations, including Italian herbs (rosemary, basil, thyme, oregano, and parsley), cinnamon and pumpkin pie spice (cinnamon, ginger, nutmeg, and allspice) on four separate occasions at least three days apart. Markers of inflammation were assessed before and at 2, 4, 5.5, and 7 hours after meal consumption by tracking nuclear translocation of nuclear factor kappa B (NF-κB), a transcription factor in inflammatory signaling, in human peripheral blood monocular cells (PBMCs) and by measuring plasma interleukin-6 (IL-6), a pro-inflammatory cytokine. Nuclear translocation of NF-κB and the proportion of PBMCs activated were estimated through a new method leveraging machine-learning immunofluorescence image analysis. Metabolic markers were also investigated by RX Daytona automated clinical chemistry analyzer. Statistical analysis was conducted using a statistical package for the social sciences (SPSS) (α<0.05, significance). Preliminary results suggested the pumpkin pie spice mixture may improve inflammatory status. Compared to the control meal, the meal with pumpkin spice reduced nuclear translocation of NF-κB and proportion of PBMCs activation, p=0.007, and p=0.005, respectively. The addition of herbs/spices in HFHC meal had no apparent effect on postprandial glucose, insulin, or IL-6 concentrations compared to the control meal. Increased triglyceride concentrations were suggested after consuming the meal with Italian herbs compared to control (p=0.004). Overall, the results of this research suggested the potential of pumpkin pie spice as having anti-inflammatory effects in the context of a typical western-style eating pattern. A major component of this research was to develop a new method for assessing real-time inflammation in the human body. While the method and data are encouraging, upgrading image resolution and programming will be the subject of future research.
Show less
- Title
- High-latitude plasma drift structuring from a first principles ionospheric model
- Creator
- Kim, Heejin
- Date
- 2020
- Description
-
In the high-latitude ionosphere dense plasma formations called polar cap patches are sometimes observed. These patches are often associated...
Show moreIn the high-latitude ionosphere dense plasma formations called polar cap patches are sometimes observed. These patches are often associated with ionospheric scintillation, a rapid fluctuation in the amplitude and phase of a radio signal that degrades communications and navigation systems. Predicting polar cap patch movement across the polar cap is an important subject for enabling forecasting of the scintillation.Lagrangian coherent structures (LCSs) are ridges indicating regions of maximum fluid separation in a time-varying flow. In previous studies, the Ionosphere-Thermosphere Algorithm for Lagrangian Coherent Structures (ITALCS) predicted the location of LCSs. These LCSs were shown to constrain polar cap patch source and transport regions for flow assumed to due to $\vec{E} \times \vec{B}$ plasma drift. The LCSs were predicted based on an empirical model of the high-latitude electric field for $\vec{E}$. In this thesis, the LCSs are generated using the first principles ionospheric model SAMI3 (SAMI3 is Another Model of the Ionosphere) as the model for electric field. The work relies on an understanding of various magnetic coordinate systems in space science, and includes three different approaches for attempting to generate the $\vec{E} \times \vec{B}$ drift as the flow fields that are to input to ITALCS. Finally, a representative LCS result is obtained with SAMI3 and shown to be at the high latitudes on the dayside, similar to prior work, but spanning a shorter longitudinal range.
Show less
- Title
- APPLICATIONS OF INTEGRATED DESIGN METHODOLOGIES: HYBRID AUTOMATION OF DESIGN SEQUENCING AND ITS INFLUENCE ON COMPLEX DESIGN PROJECTS
- Creator
- Elshanshoury, Waleed Farouk Omar
- Date
- 2020
- Description
-
After the early development of Sketchpad in 1963 by Ivan Sutherland at MIT, the first system permitted drawing geometries parametrically;...
Show moreAfter the early development of Sketchpad in 1963 by Ivan Sutherland at MIT, the first system permitted drawing geometries parametrically; computation and algorithm aided design have significantly influenced the design practice. Computation and AAD are design approaches in which the medium of expression is logic instead of geometry. These approaches raised the curtain to various utilities, including but not limited to form-finding, automation, optimization, and robotic fabrication. Computational design and algorithm aided design are becoming fundamental approaches in most design practices because of their capability to solve complex problems.This thesis begins with a timeline presenting the evolution in design derivers and manifests how designers considered ideal design throughout history. This timeline starts with architecture approaches in ancient times when beauty, durability, and functions were the first principles to identify good architecture. It ends with the creation of computational technologies, which affected the design process and its logic. It will also investigate relations between software engineering and building design, where both fields intertwine with each other in general methodologies.This research examines how computation can generate integrated design systems to approach city planning and architectural design. IDS employs data, forces, and algorithms to construct a design system instead of solid geometries. This system combines the different design processes and chronological phases in interconnected blocks. This approach manages big data and assists in decision-making using automation, optimization, and machine learning technologies.This paper examines existing precedents, applications, and design projects that utilize IDS, including form-finding, materials, and energy. It will establish how evaluation criteria, simulations, solution optimizations, and processes automation play a vital role in integrated design systems. IDS is a dynamic workflow centered on principles and consists of components and aiding tools. This research explores technological aiding tools for these systems that help increase design performance and efficiencies using voice commands and automated functions.
Show less
- Title
- Estimation of Platinum Oxide Degradation in Proton Exchange Membrane Fuel Cells
- Creator
- Ahmed, Niyaz Afnan
- Date
- 2024
- Description
-
The performance and durability of Proton Exchange Membrane Fuel Cells (PEMFCs) can be significantly hampered due to the degradation of the...
Show moreThe performance and durability of Proton Exchange Membrane Fuel Cells (PEMFCs) can be significantly hampered due to the degradation of the platinum catalyst. The production of platinum oxide is a major cause of the degradation of the fuel cell system, negatively affecting its performance and durability. In order to predict and prevent this degradation, this research examines a novel method to estimate degradation due to platinum oxide formation and predict the level of platinum oxide coverage over time. Mechanisms of platinum oxide formation are outlined and two methods are compared for platinum oxide estimation. Linear regression and two Artificial Neural Network (ANN) models, including a Recurrent Neural Network (RNN) and Feed-forward Back Propagation Neural Network (FFBPNN), are compared for estimation. The estimation model takes into account the influence of cell temperature and relative humidity.Evaluation of relative errors (RE) and root mean square error (RMSE) illustrates the superior performance of RNN in contrast to GT-Suite and FFBPNN. However, both RNN and GT-Suite showcase an average error rate below 5% while the FFBPNN had a higher error rate of approximately 7%. The RMSE of RNN shows mostly less compared to FFBPNN and GT-Suite, however, at 50% training data, GT-Suite shows lowest RMSE. These findings indicate that GT-Suite can be a valuable tool for estimating platinum oxide in fuel cells with a relatively low RE, but the RNN model may be more suitable for real-time estimation of platinum oxide degradation in PEM fuel cells, due to its accurate predictions and shorter computational time. This comprehensive approach provides crucial insights for optimizing fuel cell efficiency and implementing effective maintenance strategies.
Show less
- Title
- The Voderettes: Gender, Labor, and Techno-Utopia at the 1939 New York World's Fair
- Creator
- Simon, Sara M. B.
- Date
- 2024
- Description
-
This thesis explores the labor demands of the Voder, the electrical speech synthesis machine developed by Bell Labs to be a major component of...
Show moreThis thesis explores the labor demands of the Voder, the electrical speech synthesis machine developed by Bell Labs to be a major component of AT&T's 1939 New York World's Fair exhibit. With the United States emerging from the Great Depression, and with political tensions escalating across the globe, the paper situates the Voder's labor demands within the historical context of the fair. Specifically, I explore the decision to have young women operate the Voder, the intricacies of the machine cloaked by the warm presence of its highly-skilled female operator. Using archival records from Bell Labs engineers, the paper exposes the previously unacknowledged engineering contributions of Voder operators in the years before the fair. These young women not only influenced major decisions about the Voder's mechanics but also gave early credence to the notion that developing a performance with the machine could make for a thrilling fair exhibit. Moreover, the paper argues that at the fair itself, AT&T and Bell Labs executives used the Voder operators to normalize a new vision of a technological utopia that relied heavily and conspicuously on the infrastructural labor of women. Given the Voder's legacy, as a tool that laid critical groundwork for voice encryption technology, the paper adds important context to the historical record, highlighting the young women at the heart of the machine.
Show less