Search results
(521 - 540 of 4,268)
Pages
- Title
- ADVANCING DESIGN SIZING AND PERFORMANCE OPTIMIZATION METHODS FOR BUILDING INTEGRATED THERMAL AND ELECTRICAL ENERGY GENERATION SYSTEMS
- Creator
- Zakrzewski, Thomas
- Date
- 2017, 2017-07
- Description
-
Combined electrical and thermal energy systems (i.e., cogeneration systems) will play an integral role in future energy supplies because they...
Show moreCombined electrical and thermal energy systems (i.e., cogeneration systems) will play an integral role in future energy supplies because they can yield higher overall system fuel utilization and efficiency, and thus produce fewer greenhouse gas emissions, than traditionally separate systems. However, methods for both design sizing and performance optimization for cogeneration systems and commercial buildings lag behind the tremendous advancements that have been made in building performance simulation methods. Therefore, the overall goal of this research is to develop and apply novel cogeneration system modeling techniques for optimizing design sizing and dispatch of generation sets that reduce energy use, energy costs, and greenhouse gas emissions. This research is divided into four main research objectives: (1) generalizing cogeneration performance of lean burn natural gas spark ignition reciprocating engines, (2) developing a new Design and Optimization of Combined Heat and Power (DOCHP) systems optimization tool for improving design-sizing of building-integrated and grid-tied CHP systems, (3) demonstrating the utility of the DOCHP tool with several practical applications, and (4) integrating on-site intermittent renewable energy systems into the DOCHP tool to analyze micro-grid applications. This research leverages recent developments in multiple areas of building and system simulation methods. DOCHP advances design sizing and performance optimization methods for building integrated thermal and electrical energy generation systems through the application of an evolutionary artificial intelligence-based genetic algorithm and its ability to resolve to non-linear optimization with discrete constraints while considering non-linear part-load generation set performance curves.
Ph.D. in Civil Engineering, July 2017
Show less
- Title
- Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 Brochure F08
- Creator
- Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
- Date
- 2008, 2008-12
- Description
-
The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less
- Title
- ULTRALOW POWER SRAM DESIGN IN NEAR THRESHOLD REGION USING 45NM CMOS TECHNOLOGY
- Creator
- Chen, Yinhui
- Date
- 2011-05-10, 2011-05
- Description
-
With the development of CMOS technology, the performance including power dissipation and operation speed is highly concerned for SRAM design....
Show moreWith the development of CMOS technology, the performance including power dissipation and operation speed is highly concerned for SRAM design. Desirable low power consumption while operating fast is the goal of design and improvement. However, the tradeoff between performance and speed is one of the most challenging obstacles that engineers are facing. Along with continuously scaling in the process technology, the concern for stability of Static Random Access Memories (SRAMs) is increasing in the design and test. Maintaining an acceptable Static Noise Margin (SNM) as well as scaling the minimum feature sizes and supply voltages of the Systems-on-a-Chip (SoC) becomes more and more challenging. Subthreshold leakage, dynamic power consumption and delay are major issues for circuits design, especially for SRAM design. Subthreshold leakage and dynamic power consumption can be decreased while supply voltage is scaled down. However, this may dramatically increase the circuit delay (Lindert, 1999) (Wang, 2004) (Zhai, 2004). In this dissertation, we first prepared fundamental knowledge of the CMOS technology as well as SRAM. According to the current researches on SRAM (Chang, 2005) (Chen, 2010), we proposed a novel 6t SRAM design which operates in near threshold region to optimize leakage power and speed. Negative word line is introduced to reduce the leakage current. A novel Latch-type voltage sense amplifier is proposed to improve the read speed of the proposed SRAM cell. The proposed SRAM design is implemented in 45nm technology and achieves more than 50% for power reduction, 68% for leakage reduction, 90% for write delay reduction and 78% for read delay reduction compared to traditional 6T SRAM in near threshold region. Although the proposed 6T SRAM inherit the disadvantage of 4T schematic in data retention, the operation stability is still respectable.
M.S. in Electrical Engineering, May 2011
Show less
- Title
- Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King (sequence unknown), IPRO 314 - Deliverables: IPRO 314 Project Plan F09_redacted
- Creator
- O’leary, Kevin, Petty, Sonya, Qi, Tianshu, Tan, Sophia, Noor, Nashrah, Schleich, Kenneth, Akhtar, Ayesha, Cheng, Eric, Kim, James, Parker, Joseph, Saha, Sougata
- Date
- 2009-12
- Description
-
The objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Spo...
Show moreThe objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Sponsorship: Gage Park High School
Deliverables for IPRO 314: Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King for the fall 2009 semester.
Show less
- Title
- Jet Aeroacoustics
- Creator
- Raman, Ganesh
- Date
- 2008
- Publisher
- Multi-Science Pub.
- Title
- SURVIVAL AND ATTACHMENT OF SALMONELLA ENTERICA ON ALMOND, HAZELNUT, AND BLACK PEPPER
- Creator
- Zhai, Yang
- Date
- 2016, 2016-05
- Description
-
S. Enteritidis (SE) and S. Typhimurium (ST) are the two most common Salmonella enterica serovars that cause foodborne illnesses in U.S....
Show moreS. Enteritidis (SE) and S. Typhimurium (ST) are the two most common Salmonella enterica serovars that cause foodborne illnesses in U.S. Outbreaks of these serovars have been attributed to low moisture foods such as nuts and spices. However, little is known about the mechanisms of attachment on low moisture food surfaces. This study evaluated the associations between attachment and survival of Salmonella enterica serovars, storage temperatures, and surface characteristics of selected food samples. In the study, S. Enteritidis PT4 and S. Typhimurium LT2 were inoculated onto the surfaces of black peppercorns, almonds and hazelnuts at ~108 CFU/g. After 2 h air-drying, samples were stored at 4 and 25°C with 58 ± 2% relative humidity for up to 14 d. At specific time points, the food sample were washed two times in 1 × Phosphate Buffered Saline (PBS) to remove attached bacterial cells. The bacterial suspensions were serially diluted and plated on Brain Heart Infusion (BHI) and Xylose Lysine Deoxycholate (XLD) agar plates for enumeration. Significant differences (P<0.05) were found in the survival and attachment of SE and ST under all the conditions. ST can survive and attach better than SE at both 4 and 25°C. The decline rates on almonds, hazelnuts, and black peppercorns at 25°C were 0.348 ± 0.017, 0.273 ± 0.015, and 0.196 ± 0.017 log CFU/g per day for SE and 0.077 ± 0.008, 0.157 ± 0.008, and 0.048 ± 0.005 log CFU/g per day for ST, respectively. The attachment rates on almonds, hazelnuts and black peppercorns at 25°C were 18.71 ± 14.38, 1.56 ± 1.50, and 4.68 ± 0.76% for SE and 38.46 ± 11.32, 18.45 ± 7.73, and 56.30 ± 14.72% for ST, respectively. In addition, low temperature (i.e. 4°C) may contribute more to the survival of Salmonella than ambient temperature (i.e. 25°C). Certain surface characteristics (roughness & hydrophobicity) of hazelnut may probably result in weaker attachment of both Salmonella serovars. The results can be used to better understand the physiology of Salmonella enterica on low moisture foods and aid in developing effective control measures to reduce pathogen contamination.
M.S. in Food Safety and Technology, May 2016
Show less
- Title
- DEVELOPMENT OF AN IMPLICITLY COUPLED ELECTROMECHANICAL AND ELECTROMAGNETIC TRANSIENTS SIMULATOR FOR POWER SYSTEMS
- Creator
- Abhyankar, Shrirang
- Date
- 2011-11, 2011-11
- Description
-
The simulation of electrical power system dynamic behavior is done using tran- sient stability simulators (TS) and electromagnetic transient...
Show moreThe simulation of electrical power system dynamic behavior is done using tran- sient stability simulators (TS) and electromagnetic transient simulators (EMT). A Transient Stability simulator, running at large time steps, is used for studying rela- tively slower dynamics e.g. electromechanical interactions among generators and can be used for simulating large-scale power systems. In contrast, an electromagnetic transient simulator models the same components in finer detail and uses a smaller time step for studying fast dynamics e.g. electromagnetic interactions among power electronics devices. Simulating large-scale power systems with an electromagnetic transient simulator is computationally inefficient due to the small time step size in- volved. A hybrid simulator attempts to interface the TS and EMT simulators which are running at different time steps. By modeling the bulk of the large-scale power system in a transient stability simulator and a small portion of the system in an electromagnetic transient simulator, the fast dynamics of the smaller area could be studied in detail, while providing a global picture of the slower dynamics for the rest of power system. In the existing hybrid simulation interaction protocols, the two simulators run independently, exchanging solutions at regular intervals. However, the exchanged data is accepted without any evaluation, so errors may be introduced. While such an explicit approach may be a good strategy for systems in steady state or having slow variations, it is not an optimal or robust strategy if the voltages and currents are varying rapidly, like in the case of a voltage collapse scenario. This research work proposes an implicitly coupled solution approach for the combined transient stability and electromagnetic transient simulation. To combine the two sets of equations with their different time steps, and ensure that the TS and EMT solutions are consistent, the equations for TS and coupled-in-time EMT equations are solved simultaneously. While computing a single time step of the TS equations, a simultaneous calculation of several time steps of the EMT equations is proposed. Along with the implicitly coupled solution approach, this research work also proposes to use a three phase representation of the TS network instead of using a positive-sequence balanced representation as done in the existing transient stability simulators. Furthermore a parallel implementation of the three phase transient stability simulator and the implicitly coupled electromechanical and electromagnetic transients simulator, using the high performance computing library PETSc, is presented. Re- sults of experimentation with different reordering strategies, linear solution schemes, and preconditioners are discussed for both sequential and parallel implementation.
Ph.D. in Electrical Engineering, December 2011
Show less
- Title
- VIBRATIONAL STABILIZATION OF A CHEMICAL REACTOR - AN EXPERIMENTAL-STUDY
- Creator
- Cinar, A., Deng, J., Meerkov, S. M., Shu, X. S.
- Date
- 1987-04
- Publisher
- IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
- Description
-
Vibrational control is a method for modification of dynamic properties of linear and nonlinear systems by introduction of fast, zero-average...
Show moreVibrational control is a method for modification of dynamic properties of linear and nonlinear systems by introduction of fast, zero-average oscillations in a system's parameters. It has been previously shown that forced oscillations introduced in the reactant flow rates to a continuous stirred tank reactor (CSTR) cause a modification of theS- shaped steady-state curve. In the present note experimental evidence is given to show that this modification leads to the operation the CSTR at an asymptotically stable periodic regime located near an unstable steady-state of the reactor system having fixed flow rates. For a given average stabilized state, such a stabilizing mechanism results in a higher production rate or lower energy expenditure compared to a steady operation with shifted input conditions.
Endnote format citation
Show less
- Title
- IMPROVED SPATIAL-TEMPORAL RECONSTRUCTION FOR CARDIAC AND RESPIRATORY GATED SPECT
- Creator
- Qi, Wenyuan
- Date
- 2014, 2014-12
- Description
-
Myocardial perfusion single photon emission computed tomography (SPECT) is an important imaging technique for evaluating coronary artery...
Show moreMyocardial perfusion single photon emission computed tomography (SPECT) is an important imaging technique for evaluating coronary artery disease. It can provide information of both myocardial perfusion and ventricular function. However, SPECT images su er from both cardiac and respiratory motion blur. In order to reduce the motion degrading, cardiac and respiratory gated SPECT imaging is used. In gated SPECT imaging, due to the lowered counts, the gated images will be more noisy than the ungated ones. Spatiotemporal (4D) processing is often used to reduce the noise level in gated images. In this thesis, we aim to investigate spatial and temporal processing techniques for improving the quality in cardiac and respiratory gated SPECT imaging. First, we will investigate a piecewise spatial smoothing prior based on totalvariation (TV) in 4D cardiac SPECT image reconstruction. In previous studies, it was found that spatial smoothing could adversely a ect the accuracy of 4D reconstruction in cardiac gated SPECT when temporal smoothing was applied, even though it could suppress the noise level. Our goal is to explore whether a piecewise spatial smoothing prior will improve the image accuracy while reducing the noise. Toward this goal, we will compare TV based piecewise spatial smoothing with quadratic spatial smoothing with simulated imaging, in which we will evaluate the lesion detectability. Clinical data will also be used to compare the results as a preliminary test. Motion-compensated temporal smoothing is known to play a key role in 4D cardiac gated SPECT reconstruction. Next, we will investigate whether better motion estimation could further improve the accuracy of reconstructed images. We will consider two di erent motion estimation models and the known motion in simulated experiments. The motion estimation methods are the classic optical ow estimation (OFE) and a periodic motion estimation method. We will evaluate the reconstruction from di erent motion models using several numerical quanti cation metrics. Furthermore, we will demonstrate reconstruction with the two motion estimation models using clinical acquisitions. Respiratory motion is known to cause motion blur in SPECT image reconstruction, and respiratory gated SPECT imaging can be e ective to combat its e ect. We will develop reconstruction techniques in respiratory gated SPECT. We will consider two reconstruction schemes for respiratory gated SPECT. The rst scheme is a post motion compensated reconstruction, in which images at di erent respiratory phases are reconstructed seperately, and afterwards are averaged over all the respiratory gates by motion compensation. The second scheme is a model based motion compensated reconstruction approach, in which one reference gate is used to describe the acquisition data of all the respiratory gates. Due to irregular respiratory motion, the data acquisition in each respiratory gate is not uniformly distributed among the acquisition angles, which would lead to limited-angle artifacts. To correct such artifacts, we propose an angle compensation method in the reconstruction. In order to deal with both cardiac and respiratory motion, we will investigate a 4D reconstruction approach for dual cardiac-respiratory gated SPECT reconstruction. This approach can accommodate the acquired data simultaneously from di erent cardiac and respiratory gates. It can exploit the correlation in the signal component among both the cardiac and respiratory phases. Both simulated experiments and clinical reconstruction will be used for evaluating this reconstruction approach. Due to the radiation risk of myocardial perfusion imaging (MPI) scans, there is an urgent need to lower the radiation dose used in SPECT. However, lower radiation dose will lead to more noisy reconstruction, which is even more serious in gated SPECT. We would explore the potential of using 4D reconstruction for lowering the dose in dual cardiac-respiratory gated SPECT.
Ph.D. in Electrical and Computer Engineering, December 2014
Show less
- Title
- Sloan Valve Company (sequence unknown), IPRO 306 - Deliverables: IPRO 306 IPRO Day Presentation F09
- Creator
- Delahanty, Sean, Jaouen, Julien, Thakkar, Hetul, Jones, Santiago Guerrero, Kim, Sung, Toor, Hammad, Jalan, Arjun, Soleja, Sikander, Zhang, Yayan
- Date
- 2009-12
- Description
-
Sloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to...
Show moreSloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to pay' process and also assist in the development of a new warehouse management module.
Sponsorship: Sloan Valve Company
Deliverables for IPRO 306: Sloan Valve for the fall 2009 semester.
Show less
- Title
- USING CONFIDENCE INTERVALS WITH A SMALL SAMPLE SIZE ADJUSTMENT TO ASSESS ADVERSE IMPACT
- Creator
- May, Jill L.
- Date
- 2012-03-27, 2012-05
- Description
-
With increased diversity in the U.S. workforce, there has become a greater need for organizations to defend against accusations of...
Show moreWith increased diversity in the U.S. workforce, there has become a greater need for organizations to defend against accusations of discrimination and thus a need to produce more accurate adverse impact statistics in discrimination cases. The purpose of the present study is to investigate two adjustments to a confidence interval procedure for calculating adverse impact to see if they give more adequate performance over the unadjusted Morris and Lobsenz (2000) confidence interval procedure. A Monte Carlo simulation revealed that using an adjustment for small sample sizes alleviates some of the problems found for the confidence interval procedure found in previous research. Specifically, adding a 0.5 adjustment to the confidence interval procedure increases the accuracy over the unadjusted procedure and the Agresti and Caffo (2000) procedure. Implications for practioners and researchers are included in the discussion.
M.S. in Psychology, May 2012
Show less
- Title
- Smart Binoculars for Military & Civilian Use (sequence unknown), IPRO 350 - Project Plan: IPRO%20350%20Project%20Plan%20F09_redacted
- Creator
- Bubert, Casey, Fairall, Earl, Hopkins, Dong, Hutchins, Sarah, Kobayashi, Jonathan, Mccluskey, John, Pain, Muhammad, Patel, Purvag, Roa, Carlos, Spitler, Noah
- Date
- 2009-12
- Description
-
GPS modules and tracking devices have influenced many advances in modern technology. The data GPS provides has replaced the map and compass,...
Show moreGPS modules and tracking devices have influenced many advances in modern technology. The data GPS provides has replaced the map and compass, and can be crucial in many situations. Its current platform for use however requires the user to utilize a handheld device and direct his/her frame of view to a screen. In many situations there is a need to have eyes on and full awareness of surroundings, something that simply can't be done while holding and viewing a handheld device. To solve this dilemma, team Smart Specs has integrated ideas of GPS, heads-up displays, and datalink technology to form a design that will give the user full hands free capabilities. This device, worn like glasses, allows the user to track objects and even designate objects to be tracked, which are all shown through heads-up display.
Project plan for IPRO 350: Smart Binoculars for Military & Civilian Use for the fall 2009 semester
Show less
- Title
- DIFFERENT EXPLORATION ACTIVITY AND DETECTION THRESHOLD TOWARDS ODOR SETS BETWEEN CONNEXIN 36 KNOCKOUT MICE AND WILD-TYPE MICE
- Creator
- Chai, Xiaomeng
- Date
- 2012-04-16, 2012-05
- Description
-
The sense of smell allows an organism to be aware of the chemical information of the external world. In most land animals, the olfactory...
Show moreThe sense of smell allows an organism to be aware of the chemical information of the external world. In most land animals, the olfactory system enables the perception of both volatile chemicals, as well as pheromones--chemicals released by animals that regulate their social activities. Among several factors that mediate olfaction, connexin 36 (Cx36), a subunit of gap junctions, has been suggested to play a crucial role in the olfactory system. In the research presented herein, I performed habituation/dishabituation studies on both Cx36 knockout (Cx36 KO) and wild-type mice to determine their exploration patterns towards four odorants. The results indicate that Cx36 KO and wild-type mice behaved differently when they were given defined odorants. In general, Cx36 KO mice spent more time exploring odorants. Cx36 KO and wild-type mice also exhibited different detection threshold towards given odorants. Moreover, cross-habituation between benzaldehyde and octaldehyde was established in Cx36 KO mice at the concentration of 10-4%, which was different from that in wild-type mice. These results may suggest important functions of Cx36 gap junctions in odor detection and integration in mammals. Keywords: Connexin 36, gap junction, olfactory system, habituation/dishabituation
M.S. in Biology, May 2012
Show less
- Title
- A study of the "cracking" of petroleum
- Creator
- Heritage, Clark Cable, Hook, Frank William.
- Date
- 2009, 1914
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/studyofcrackingo00heri
Thesis (B.S.)--Armour Institute of Technology, 1914 B.S. in Chemical Engineering, 1914
- Title
- Using Assessment Data to Improve Library Services : presented at ILA 2007 conference: 2007program
- Creator
- Stewart, Christopher, Uth, Charles
- Date
- 2007-10
- Description
-
IIT Libraries conducted LibQUAL+ service quality assessment in 2004 and 2006. This presentation will outline strategies we undertook to...
Show moreIIT Libraries conducted LibQUAL+ service quality assessment in 2004 and 2006. This presentation will outline strategies we undertook to address issues identified in the 2004 assessment, and evaluate their success based on assessment results in 2006. We will also discuss the importance of measuring academic library effectiveness in higher education’s emerging outcomes-based culture.
Show less
- Title
- ADVANCED TRACER KINETIC MODELS FOR IMPROVED TUMOR MARGIN DETECTION AND GUIDING THERAPY
- Creator
- Sinha, Lagnojita
- Date
- 2014, 2014-07
- Description
-
Cancer continues to be the second leading cause of death in the world with one in two individuals suffering from some form of cancer within...
Show moreCancer continues to be the second leading cause of death in the world with one in two individuals suffering from some form of cancer within their lifetimes [1]. The main objective in most cancer therapies is to achieve a complete resection of the cancerous cells, which in surgical approaches is evident from the diagnosis of positive resection margins during postoperative pathology. However, pathological analysis is performed after the patient has been discharged. Thus technologies capable of identifying tumor margins in resected samples intraoperatively could substantially reduce the psychological and economical burden of “call-back” surgeries. As a step in this direction, a wide-field Raman spectroscopy system was employed, which has the capacity to discriminate between tumor and healthy tissue through a “dual-tracer” staining approach within the surgical window. The approach entails dipping the resected tissue in two tracers: one targeted to a cancer specific cell-surface receptor, and another left “untargeted”. In this experiment human glioma (U251) and human epidermoid (A431) tumors were grown subcutaneously in ten nude athymic mice. The data obtained from the Raman spectra of different tissue specimens were then analyzed through tracer kinetic modeling to quantify cancer molecule abundance as a surrogate of cancer presence. The salient finding in this study was that the model was able to predict the expected differences in EGFR concentration amongst the healthy tissue, U251, and A431. Kinetic model estimation of the ratio of EGFR concentration in U251 and A431 cell lines were in the ratio of 2:1, which correlates, with the expected ratio of EGFR concentration determined by flow cytometry which was close to 4:1. This technology not only promises to xii highlight tumor margins on a molecular level but can also be leveraged to analyze the molecular environment of the tumor to guide adjuvant precision therapies. Tracer kinetic modeling approaches were also applied to a guided precision therapy called Photodynamic therapy. Not only could the analysis of data provide parameter values for the tracer kinetics but an approach was also developed which with only a few initial data points could predict the time optimal for therapy in advance of the drug concentration maximum.
M.S. in Electrical Engineering, July 2014
Show less
- Title
- Large x physics: recent results and future plans, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
- Creator
- Holt, Roy J.
- Date
- 2013-09-15, 2013-09-15
- Publisher
- IIT Press
- Description
-
The valence region is exceedingly important in hadron physics since this region not only defines a hadron but also is an excellent...
Show moreThe valence region is exceedingly important in hadron physics since this region not only defines a hadron but also is an excellent discriminator of nucleon structure models. Present uncertainties in light quark distribution functions at high x could also impact high energy physics. Here we will describe a new generation of experiments at Jefferson Lab that is aimed at the high x region of the nucleon. It is noted that the proposed Electron Ion Collider could explore the high x regime.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less
- Title
- IN-PACKAGE DECONTAMINATION OF SALMONELLA MONTEVIDEO ON BLACK PEPPER USING PULSED LIGHT TECHNOLOGY
- Creator
- Xu, Xinran
- Date
- 2016, 2016-07
- Description
-
This study evaluated the efficacy of three pulsed light systems (1.8, 3 and 100 Hz) for inactivation of Salmonella Montevideo on the surface...
Show moreThis study evaluated the efficacy of three pulsed light systems (1.8, 3 and 100 Hz) for inactivation of Salmonella Montevideo on the surface of black pepper. The impact of frequency, treatment time and distance from the lamp on the rate of inactivation was studied. A reduction of 4.21 1og10 CFU/g was achieved with a 35 s treatment at 16.6-cm from lamp at 1.8 Hz. Similarly, reductions of 4.72 CFU/g and 4.70 CFU/g were obtained at 14.1-cm after 35 s treatment at 3 Hz and 100 Hz, respectively. Temperature measurement of packed and unpacked black pepper indicated that packaging material absorbed a small amount of energy. Measurement of surface and internal temperature suggested that temperature below the surface increased far less than surface temperature. For instance, temperature on the surface of the black pepper can go up to 200 °C as measured by the infrared camera within 30 to 40 s treatment. However, the temperature at 1 mm below the surface was up to 100 °C depending upon the distance from the lamp. The color of the black pepper did not change after pulsed light treatment (p>0.05). These results suggest that pulsed light can potentially be used to inactivate pathogens on black pepper surface without adversely affecting its quality.
M.S. in Food Safety and Technology, July 2016
Show less
- Title
- Sloan Valve Company (sequence unknown), IPRO 306 - Deliverables: IPRO 306 Abstract F09
- Creator
- Delahanty, Sean, Jaouen, Julien, Thakkar, Hetul, Jones, Santiago Guerrero, Kim, Sung, Toor, Hammad, Jalan, Arjun, Soleja, Sikander, Zhang, Yayan
- Date
- 2009-12
- Description
-
Sloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to...
Show moreSloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to pay' process and also assist in the development of a new warehouse management module.
Sponsorship: Sloan Valve Company
Deliverables for IPRO 306: Sloan Valve for the fall 2009 semester.
Show less
- Title
- TASK/STAFFING-TECHNOLOGY FIT IN CONSTRUCTION SCHEDULING
- Creator
- Yang, Juneseok
- Date
- 2015, 2015-07
- Description
-
Construction managers use scheduling methods such as the critical path method (CPM) and linear scheduling methods (LSM) to improve the outcome...
Show moreConstruction managers use scheduling methods such as the critical path method (CPM) and linear scheduling methods (LSM) to improve the outcome of their project. CPM is a popular scheduling method that is mostly based on precedence relationships and the identification of the longest path through a network. LSMs are based on a continuous flow of resources and are used mostly on projects that exhibit repetitive characteristics. Despite the many obvious advantages of CPM, its use in construction has been limited. LSMs are much less frequently used than CPM, although the general consensus is that LSMs are quite effective in projects composed of activities of repetitive nature. Understanding the reasons why these methods are not used as extensively as expected could improve their level of acceptance in the construction industry. The link between construction scheduling methods and the tasks expected to be performed by schedulers has been an on-going concern in the construction industry. The link between construction scheduling methods and the capabilities of the scheduling staff has also been an important issue. This study proposes a combined task/staffing-technology fit model to understand why CPM and LSM are not used as extensively as expected in construction scheduling: (1) a task-technology fit model that aims to measure the extent to which a construction scheduling method functionally matches the tasks expected to be performed by the scheduling staff; (2) a staffing-technology fit model that aims to measure the extent to which a construction scheduling method matches the staff`s experience, know-how and capabilities. The models that are proposed are an answer to the lack of proper instruments for evaluating the extent to which scheduling methods are used in the industry. A questionnaire survey was administered to professionals listed in the directory of the Construction Management Association of America (CMAA) who have many years of experience in construction scheduling. Statistical analyses were performed to determine statistical significance of the differences between the level of agreement concerning task-technology fit and staffing-technology fit for CPM and LSM applications. Findings indicate that there are significant differences between the opinions of CPM users and LSM users. This means that task-technology fit is much different in CPM and LSM applications. Similarly, staffing-technology fit is also quite different in CPM and LSM applications.
M.S. in Civil Engineering, July 2015
Show less