Search results
(481 - 500 of 4,585)
Pages
- Title
- ANTENNA LOCATION DESIGN IN DOWNLINK DISTRIBUTED ANTENNA SYSTEM
- Creator
- Zhang, Peng
- Date
- 2015, 2015-07
- Description
-
In recent years, Wireless cellular network design with distributed antenna system (DAS) has received much attention for its ability to extend...
Show moreIn recent years, Wireless cellular network design with distributed antenna system (DAS) has received much attention for its ability to extend the cell coverage, improve spectral efficiency and increase the system capacity. Instead of locating all antennas at the cell center in the centralized antenna systems (CAS), distributed antenna basements in the DAS are separated geographically, which has been wide implemented to cover the dead spots and improve the system efficiency in wireless communication systems The mainly purpose of this research is to find optimal antenna locations that maximize the cell average ergodic capacity for the distributed-antenna system in downlink applied condition. Squared distance criterion (SDC) will be considered to offer an object function to maximize the lower bound of the cell average ergodic capacity. Existed analyses for location design in distributed antenna system are based on the uniform distribution without considering other cell interference. Considering other cell interference, I derive the analytical antenna location position for the infinite uniform distribution linear cell. For multi-cell applied condition implementation, I get reasonable locations of the applied condition by applying K-means algorithm to generating the initial values and find the optimal location. In order to solve the multi-cell scenario considering other-cell interference, I change the existed algorithm and simulation results show the performance of the obtained antenna location with changed algorithm offer a higher performance than the original one. I propose a circle initial setup to generate the initial points for relative location and converge fitting. The simulation has showed the initial setup I proposed significant reduce the computation in the antenna location design in applied downlink scenario.
M.S. in Electrical Engineering, July 2015
Show less
- Title
- Space|Place: CharlottePage_Master's Project_Booklet
- Creator
- Page, Charlotte
- Date
- 5/4/2011, 2011-05
- Description
-
A commentary on Education: examination of the experience of the subject (space) in relation to the object (place).
Sponsorship: Conger-Austin,...
Show moreA commentary on Education: examination of the experience of the subject (space) in relation to the object (place).
Sponsorship: Conger-Austin, Susan
Show less
- Title
- A study of water distribution from automatic sprinklers
- Creator
- Schmidt, J. L., Alling, C. R
- Date
- 2009, 1907
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/studyofwaterdist00schm
Thesis (B.S.)--Armour Institute of Technology, 1907 B. S. in Fire Protection Engineering,...
Show morehttp://www.archive.org/details/studyofwaterdist00schm
Thesis (B.S.)--Armour Institute of Technology, 1907 B. S. in Fire Protection Engineering, 1907
Show less
- Title
- Controller performance assessment by frequency domain techniques
- Creator
- Kendra, S. J., Cinar, A.
- Date
- 1997-06
- Publisher
- ELSEVIER SCI LTD
- Description
-
A system identification based method for assessing the performance of closed-loop systems is proposed, utilizing measures which coincide...
Show moreA system identification based method for assessing the performance of closed-loop systems is proposed, utilizing measures which coincide naturally with classical and modern frequency domain design specifications. Standard robust control system design methodologies seek to maximize closed-loop performance, subject to strict robustness requirements and include specifications for bandwidth and peak magnitude of the sensitivity and complementary sensitivity functions. Estimates of these transfer functions can be obtained by exciting the reference input with a zero mean, pseudo random binary sequence, observing the process output and error response, and developing a closed-loop model. Performance assessment is based on the comparison between the observed frequency response characteristics and the design specifications. Selection of appropriate model structures, experiment design, and model validation which will ensure reasonable estimates of the closed-loop transfer functions are considered in this paper. A case study involving the performance assessment of a packed bed tubular reactor control system is presented.
Endnote format citation
Show less
- Title
- Resonant interaction of a linear array of supersonic rectangular jets: An experimental study
- Creator
- Raman, G, Taghavi, R
- Date
- 1996-11-10
- Publisher
- CAMBRIDGE UNIV PRESS
- Title
- Using Assessment Data to Improve Library Services : presented at ILA 2007 conference: ILA_presentation_07_revised_final: ILA_presentation_07_revised_final
- Creator
- Stewart, Christopher, Uth, Charles
- Date
- 2007-10
- Description
-
IIT Libraries conducted LibQUAL+ service quality assessment in 2004 and 2006. This presentation will outline strategies we undertook to...
Show moreIIT Libraries conducted LibQUAL+ service quality assessment in 2004 and 2006. This presentation will outline strategies we undertook to address issues identified in the 2004 assessment, and evaluate their success based on assessment results in 2006. We will also discuss the importance of measuring academic library effectiveness in higher education’s emerging outcomes-based culture.
Show less
- Title
- A system of automatic train control
- Creator
- Morgan, Charles Woodward
- Date
- 2009, 1911
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/systemofautomati00morg
Thesis (B.S.)--Armour Institute of Technology, 1911 Includes bibliographical references...
Show morehttp://www.archive.org/details/systemofautomati00morg
Thesis (B.S.)--Armour Institute of Technology, 1911 Includes bibliographical references and index B.S. in Mechanical Engineering, 1911
Show less
- Title
- Proton structure from multiparticle contribution to elastic pp-scattering at 7 TeV, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
- Creator
- Dremin, I. M.
- Date
- 2013-09-15, 2013-09-15
- Publisher
- IIT Press
- Description
-
The parton content of protons gets strong peripheral contribution at 1 fm from multiparticle dynamics as revealed by the overlap function in...
Show moreThe parton content of protons gets strong peripheral contribution at 1 fm from multiparticle dynamics as revealed by the overlap function in the unitarity condition for elastic pp-scattering at 7 TeV.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less
- Title
- The synthetic manufacture of phenol
- Creator
- Parrot, Raymond D.
- Date
- 2009, 1919
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/syntheticmanufac00parr
Thesis (B.S.)--Armour Institute of Technology
- Title
- THERMAL AND FLUID FLOW FEASIBILITY STUDY OF A CIRCULAR COUETTE FLOW REACTOR VIA PLANAR LASER-INDUCED FLUORESCENCE IMAGING
- Creator
- Bittner, Peter R.
- Date
- 2012-04-28, 2012-05
- Description
-
Liquid fueled microcombustors face many challenges in their development, the most prominent being high temperature gradients and radiative...
Show moreLiquid fueled microcombustors face many challenges in their development, the most prominent being high temperature gradients and radiative effects. Because the walls of microcombustors are thin, they offer very little resistance to conductive heat transfer, regardless of the materials used. This can cause very high heat losses that lead to large temperature gradients in the gas compared to nearly uniform temperatures inside conventional combustion chambers. In this investigation a circular Couette flow reactor (CCFR) and planar laser induced fluorescence (PLIF) are used to examine the feasibility of studying vapor distributions of a monodisperse acetone droplet stream, formed by a vibrating orifice aerosol generator (VOAG), exposed to combinations of varying velocity gradients, temperature gradients and radiant heating. The acetone droplets are injected through various ports on the CCFR to vary the time for vaporization of the droplets inside the reactor. Initial results of the operating CCFR uses acetone droplets seeded into the test section to demonstrate the fluorescence of the liquid and vapor acetone within the test section.
M.S. in Mechanical, Materials, and Aerospace Engineering, May 2012
Show less
- Title
- Easy Access, Early Exit? The Internet and the FDLP (preprint)
- Creator
- Griffin, Luke A., Ahrens, Aric G.
- Date
- 2004-07
- Description
-
The article presents information on Federal Depository Library Program (FDLP). The majority of the twentieth century saw a marked growth in...
Show moreThe article presents information on Federal Depository Library Program (FDLP). The majority of the twentieth century saw a marked growth in the number of libraries participating in FDLP. The FDLP was established by Congressional resolution on December 27, 1813. On December 1, 1814, the American Antiquarian Society of Worcester, Massachusetts received the first documents distributed to a non-governmental body and became the first depository library. The primary purpose of the program was preservation of the historical record, not dissemination. Staff and funding issues and the availability of resources via the Internet points to the weight that libraries may be placing on the ability to provide information via the Internet on their decisions to remain in or to leave the FDLP. In today's work environment, in which increased productivity is expected and doing more with less is essential, the Internet can be an obvious alternative to physical collections, which require space and greater staff time and resources. In the last decade, the essential association between the ability to provide access to government information and participation in the FDLP has broken down.
Show less
- Title
- EFFICIENT AND FAIR RESOURCE ALLOCATION FOR OFDMA NETWORKS
- Creator
- Alavi, Seyed Mohamad
- Date
- 2012-11-26, 2012-12
- Description
-
In Orthogonal Frequency Division Multiple Access (OFDMA) systems, resources, including subcarriers, bits and power, need to be adaptively...
Show moreIn Orthogonal Frequency Division Multiple Access (OFDMA) systems, resources, including subcarriers, bits and power, need to be adaptively allocated to users in order to improve spectral efficiency, increase capacity, and reduce power consumption, while satisfying the Quality of Service (QoS) requirements for users. Most of the previous works concentrate on satisfying rate and power requirements, however providing delay requirement is also necessary, especially with increasing demand on delay-sensitive applications. We first model the resource allocation problem as a cross-layer optimization problem considering the constraints on bit error rate (BER), data rate, total power, as well as delay. We first develop a nonlinear optimization model, which generally requires high computation complexity. To consider a more realistic scenario, we take into account imperfect Channel State Information (CSI) due to estimation errors or channel feedback delay, and incorporate the imperfect CSI into the optimization problem formulation. We then derive the solution through a dual decomposition method. Due to the duality gap between the original and dual optimizations, we convert the non-linear optimization to an equivalent linear formulation so that an exact solution can be obtained. To further reduce the complexity, we develop a heuristic algorithm to provide a solution close to the optimum. Then, we study the notion of fairness in the context of resource allocation. In particular, cooperative game theory can be applied to OFDMA networks for fair resource allocation. We apply two cooperative games, Non-Transferable Utility (NTU) game and Transferable Utility (TU) game, to provide fairness in OFDMA networks. In NTU game, fairness is achieved by defining appropriate objective function, while in TU game, fairness is provided by forming the appropriate network structure. For NTU game, we analyze the Nash Bargaining Solution (NBS) as a solution of NTU game taking into account CSI and Queue State Information (QSI). In a TU game, we show that coalition among subcarriers to jointly provide rate requirements leads to better performance in terms of power consumpviii tion. We show that although NTU and TU games are modeled as rate adaptive and margin adaptive problems, respectively, but both solutions provide a fair distribution of resources with minimum fairness index of 0.8. Although NBS can provide fairness, the fairness is not from user perspective. In competitive fairness, which is based on auction theory, each user is responsible for his/her own action. A distributed allocation of resources in OFDMA networks is studied through auction theory. A combinatorial auction is formulated in which the users’ utility enforce the truthful resource demands. Since the original problem is NP hard, a method based on simulated annealing applied to find near-optimum results. Then, we turn our attention toward a more complicated scenario of multicell OFDMA networks. A combinatorial auction, which takes into account the interference from adjacent cells is presented. Auction objective is to minimize the interference, while power of users is limited. Due to the complexity of original problem, we apply a heuristic approach, in which the bids are ordered based on the linear programming approximation of combinatorial auction, and then local improvements are made in the order of bids. Our iterative approach along with the proposed load control scheme provides fair distribution of resources to the users, regardless of their position in the cell. Finally, we propose a comprehensive auction in OFDMA network. We present an auction framework for allocation of subcarriers, in which winner pays monitoring and entry fees, in addition to the price which he is paying for the allocated subcarrier. We prove that in our framework users will avoid bidding for the subcarriers where they have a relatively low chance of winning. We obtain optimal bidding strategy based on Bayesian Nash Equilibrium (BNE) in which users are maximizing their net profit. In a Fractional Frequency Reuse (FFR) implementation of frequency planning, we will find a focal distance which classifies the users into cell-center and cell-edge users. It is shown that the focal distance increases as the interference decreases.
PH.D in Electrical Engineering, December 2012
Show less
- Title
- Finding Uses for Alternative Fuels in Intermodal Transportation Hubs (sequence unknown), IPRO 307 - Deliverables
- Creator
- Balakirev, Konstantin, Beau‐luby, Ryan, Bouikidis, John, Cargill, Matthew, Dziuba, David, Kehoe, Matthew, Slonski, Bryan, Tesfaye, Melat, Wiese, Matthew, Wiseman, Christopher, Zook, Joel
- Date
- 2009-12
- Description
-
Chicago, being the third largest freight hub in the world, needs an efficient movement of goods for the increasing freight shipments.
Sponsorsh...
Show moreChicago, being the third largest freight hub in the world, needs an efficient movement of goods for the increasing freight shipments.
Sponsorship: Mi-Jack
Deliverables for IPRO 307: Finding Uses for Alternative Fuels in Intermodal Transportation Hubs for the fall 2009 semester.
Show less
- Title
- Static and dynamic behavior of autocatalytic replicators in reactor networks
- Creator
- Tatara, E., Birol, I., Teymour, F., Cinar, A.
- Date
- 2004-07-07
- Publisher
- AMER CHEMICAL SOC
- Description
-
The static and dynamic behavior of the autocatalytic reaction R + 2P --> 3P with decay P --> D is studied in networks of coupled continuous...
Show moreThe static and dynamic behavior of the autocatalytic reaction R + 2P --> 3P with decay P --> D is studied in networks of coupled continuous stirred tank reactors (CSTRs). Numerical bifurcation studies of the system are performed, resulting in rich steady-state bifurcation structures with multiple steady states and isolas. The heterogeneity of the networks is influenced by the number of reactors as well as the network topology. It is shown that the number of steady states of the network increases with heterogeneity, thereby allowing those autocatalytic species to exist in the network that would normally not exist in the homogeneous environment of a single CSTR. Spatial patterns of stable steady states are evident in reactor networks. Dynamic simulation studies are performed to illustrate the transition from one stable state configuration to another or from stable steady states to periodic regimes.
Endnote format citation for DOI:10.1021/ie030802d
Show less
- Title
- EFFECTIVENESS OF CLEANING REGIMENS FOR REMOVING PEANUT, MILK AND EGG RESIDUE FROM PILOT-SCALE CEREAL BAR AND MUFFIN PROCESSING LINES
- Creator
- Zhang, Xi
- Date
- 2014, 2014-07
- Description
-
Allergen cross-contact can be caused by inadequate cleaning of shared processing equipment. The objectives of this project were to evaluate...
Show moreAllergen cross-contact can be caused by inadequate cleaning of shared processing equipment. The objectives of this project were to evaluate the effectiveness of cleaning regimens on removing allergenic food residue from a pilot-scale cereal bar and muffin processing lines and measure the levels of allergens (peanut, milk and egg) transferred into allergen-free (control) cereal bars and muffins processed on an inadequately cleaned processing line. Another object was to investigate the analytical methods used (conventional ATP, sensitive ATP, total protein and lateral flow) to evaluate the effectiveness of allergen cleaning procedures. Cereal bars and muffins containing peanut flour, nonfat dry milk and egg powder (1000 or 5000 g/g for cereal bar and 100 or 5000 g/g for muffin) were manufactured on a pilot-scale processing line followed by one of four cleaning regimens: 1) push-through with control cereal bar dough or muffin batter, 2) scraping the equipment surfaces with rubber scrapers, 3) a rinse with hot (54-60°C) water until “visibly clean” and 4) a full cleaning cycle with alkaline detergent followed by use of a sanitizer. The adequacy of the cleaning treatments was assessed by swabbing locations (3 swabs/location) on the processing lines (cereal bar: mixer, depositor, conveyor belt; muffin: mixer, depositor, nozzle) followed by analysis of swabs with peanut-, milk-, and egg-specific lateral flow devices (LFDs). The cereal bar crosscontact study involved obtaining samples of the sheeted control dough transferred over the conveyor belt at 2 min intervals over a 30 min time span, or after approximately 100 kg of cereal bar dough was processed over the line previously contaminated with 5000 g/g allergen-incurred cereal bars. Similarly, allergen cross-contact from the contaminated muffin processing line into control muffins was measured by collecting xi 750g of control muffin batter until a total of 36 kg of batter were deposited. This was followed by allergen analysis of cereal bar and muffin samples (before and after baking) using quantitative ELISA kits. Results of LFD tests indicated that hot water rinse was effective for cereal bar processing line but not for the muffin line. Only the full cleaning cycle was effective at removing allergenic food residues for both processing lines. During the cross-contact study, substantial levels of peanut, milk and egg were detected in samples obtained both before and after baking. Cereal bar dough produced on the contaminated lines contained up to 71.9 ± 48.9 μg/g egg, 23.3 ± 1.3 μg/g milk, and 5.0 ± 0.4 μg/g peanut and as high as 2929.7 ± 98.8 μg/g egg, 1894.9 ± 87.7 μg/g milk, and 193.2 ± 20.6 μg/g peanut in muffin batter. Overall, these results illustrate the importance of validated cleaning protocols for preventing allergen cross-contact on shared processing lines.
M.S. in Food Safety and Technology, July 2014
Show less
- Title
- A study of a suction gas producer
- Creator
- Hoffman, Balthasar
- Date
- 2009, 1907
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/studyofsuctionga00hoff
Thesis (B.S.)--Armour Institute of Technology
- Title
- Cohousing Dallas
- Creator
- Justin, Vaughan
- Date
- 2010-05-01, 2010-05-01
- Description
-
20 Households participated in the process of creating this Cohousing proposal. Cohousing is a type of collaborative housing in which residents...
Show more20 Households participated in the process of creating this Cohousing proposal. Cohousing is a type of collaborative housing in which residents actively participate in the design and operation of their own neighborhoods. The interactions with the participants included conversations and questionnaires aimed at bringing forth desired qualities of a residence and a larger community. The design proposal of this project attempts to reflect the individualities and shared qualities of its future cohabitants.
Show less
- Title
- AN ANALYTICAL MODEL FOR SWITCHED RELUCTANCE MACHINE WITH HIGHER NUMBER OF ROTOR POLES
- Creator
- Jia, Yijiang
- Date
- 2012-05-08, 2012-05
- Description
-
With growing interest in renewable energy technology and hybrid electric vehi- cle systems owing to environmental concerns and depleting...
Show moreWith growing interest in renewable energy technology and hybrid electric vehi- cle systems owing to environmental concerns and depleting fossil fuel reserves, electric machines have received widespread attention as a key component in the successful im- plementation of high efficiency drives. Towards this goal, the last two years have seen a significant increase in research in permanent magnet-alternative machine topologies. This has primarily been because of growing concerns over foreign dependence for rare- earth materials and a dramatic increase in the cost of permanent magnets. Switched Reluctance Machine (SRM) has been one of the leading contenders in this category. It does not require any permanent magnets, and is very suitable for operation in harsh operating environments. Furthermore, this machine has simple construction and is highly fault-tolerant with one of the widest operating speed ranges. Nowadays, it has found wide application in the automotive, aerospace as well as domestic area. How- ever conventional SRM suffers from modeling complexity and torque ripple during the phase commutation with the same origin. Using the novel PD formula proposed at the Illinois Institute of Technology, a new family of machines has been developed with a significant improvement in torque ripple. Owing to its novel configuration, analytical models for the design of advanced driver system design have also not been developed. In this study, an analytical model for the novel 6/10 SRM has been proposed. The machine model is characterized using an inductance model utilizing truncated Fourier series as well as multi-order polynomial curve-fitting algorithm. The induc- tance model is extended to back-EMF and electromagnetic torque models on purpose of obtaining the whole information for every single operating point of the machine during dynamic operation. The effectiveness of the proposed concept has analyzed for a prototype machine in the laboratory and verified using Finite Element Analysis. From this study, an algorithm has been proposed to develop the analytical model for the family of SRMs with higher number of rotor poles.
M.S. in Electrical Engineering, May 2012
Show less
- Title
- Washington Park Center for Improvisational Music
- Creator
- White, Kellen
- Date
- 2010-07-30
- Title
- Power Measurement for Road Bicycles: Towards a Universal Solution (sequence unknown), IPRO 324 - Deliverables: IPRO 324 Midterm Presentation F09
- Creator
- Adrianzen, Luis, Allen, Ross, Antonio, Chris, Callan, Mark, Claxton, Sara, Diesse, Patrick, Gaylord, Matthew, Herbert, Greg, Shaffer, Dan, Wegrzyn, Celeste
- Date
- 2009-12
- Description
-
The goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with...
Show moreThe goal of the IPRO is to try to find an inexpensive, but accurate way of measuring the power output of a rider on a bicycle. Problems with systems currently available are: some products are not compatible with all bike systems causing the need to purchase new parts, the cost of the available products is expensive, and some of the available measuring systems are not very accurate.
Deliverables for IPRO 324: Power Measurement for Road Bicycles: Towards a Universal Solution for the fall 2009 semester
Show less