THERMAL AND FLUID FLOW FEASIBILITY STUDY OF A CIRCULAR COUETTE FLOW REACTOR VIA PLANAR LASER-INDUCED FLUORESCENCE IMAGING

Access to IIT electronic theses and dissertations is restricted to IIT community members with a valid iit.edu email address. Please log in using your iit.edu email address and password. Requests for external users are handled through inter-library loan and can be emailed to iitmyillms@iit.edu.

Description

Liquid fueled microcombustors face many challenges in their development, the most prominent being high temperature gradients and radiative effects. Because the walls of microcombustors are thin, they offer very little resistance to conductive heat transfer, regardless of the materials used. This... Show moreLiquid fueled microcombustors face many challenges in their development, the most prominent being high temperature gradients and radiative effects. Because the walls of microcombustors are thin, they offer very little resistance to conductive heat transfer, regardless of the materials used. This can cause very high heat losses that lead to large temperature gradients in the gas compared to nearly uniform temperatures inside conventional combustion chambers. In this investigation a circular Couette flow reactor (CCFR) and planar laser induced fluorescence (PLIF) are used to examine the feasibility of studying vapor distributions of a monodisperse acetone droplet stream, formed by a vibrating orifice aerosol generator (VOAG), exposed to combinations of varying velocity gradients, temperature gradients and radiant heating. The acetone droplets are injected through various ports on the CCFR to vary the time for vaporization of the droplets inside the reactor. Initial results of the operating CCFR uses acetone droplets seeded into the test section to demonstrate the fluorescence of the liquid and vapor acetone within the test section.
M.S. in Mechanical, Materials, and Aerospace Engineering, May 2012 Show less

Details
Department

MMAE / Mechanical, Materials, and Aerospace Engineering

Title

THERMAL AND FLUID FLOW FEASIBILITY STUDY OF A CIRCULAR COUETTE FLOW REACTOR VIA PLANAR LASER-INDUCED FLUORESCENCE IMAGING

Institution

Illinois Institute of Technology

Creator(s)

Bittner, Peter R.

Advisor(s)

Clack, Herek

Date

2012-04-28
2012-05

Description

Liquid fueled microcombustors face many challenges in their development, the most prominent being high temperature gradients and radiative effects. Because the walls of microcombustors are thin,... Show moreLiquid fueled microcombustors face many challenges in their development, the most prominent being high temperature gradients and radiative effects. Because the walls of microcombustors are thin, they offer very little resistance to conductive heat transfer, regardless of the materials used. This can cause very high heat losses that lead to large temperature gradients in the gas compared to nearly uniform temperatures inside conventional combustion chambers. In this investigation a circular Couette flow reactor (CCFR) and planar laser induced fluorescence (PLIF) are used to examine the feasibility of studying vapor distributions of a monodisperse acetone droplet stream, formed by a vibrating orifice aerosol generator (VOAG), exposed to combinations of varying velocity gradients, temperature gradients and radiant heating. The acetone droplets are injected through various ports on the CCFR to vary the time for vaporization of the droplets inside the reactor. Initial results of the operating CCFR uses acetone droplets seeded into the test section to demonstrate the fluorescence of the liquid and vapor acetone within the test section. Show less

Type

Thesis

File type

application/pdf

Access

Restricted Access

Rights

In Copyright
http://rightsstatements.org/page/InC/1.0/

Identifier

http://hdl.handle.net/10560/2829

<p></p><p></p>