Search results

Title: The Intrepid Penguin Lodge at Shackleton Station: AAA-Final_x264_001
Creator: Tolsky, Benjamin
Date: 2011, 2011-05
Description: This is a design for a new research station in Antarctica that also includes Antarctica's first hotel as part of the station. The emphasis is...
Show moreThis is a design for a new research station in Antarctica that also includes Antarctica's first hotel as part of the station. The emphasis is on a modular design that is easily expandable and reconfigurable in order to meet the needs of future Antarctic research and tourism demands. The end result of the project is a single 16 minute animation to demonstrate life at the station both as a daily routine and a seasonal routine, as well as the logistics of shipping and constructing the station in Antarctica.
Show less

Title: Planning the 21st Century Urban Farm: From High Rise to Neighborhood (sequence unknown), IPRO 336 - Deliverables: IPRO 336 Project Plan F09
Creator: Bhatti, Talha, Binet, Adrien, Bredau, Jason, Chen, Emily, Davis, Jacob, Gaonkar, Gaurav, Garcia, Raul, Guerrero, Fernando, Gulling, Richard, Kagehiro, Michael, Moshfeghian, Elnaz, Nunez-gimeno, Jose, Phillips, Zachary, Plumb, Isaac, Ryan, Emily, Skaggs, Jake, Sobon, Konrad, Valmores, Travis
Date: 2009-12
Description: The purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. The growing problems regarding the...
Show moreThe purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. The growing problems regarding the traditional methods of agriculture, and the rate of growth of the world population, the team plans to design a method to grow food more efficiently and economically in urban areas. The team is looking at large, industrial warehouse-type buildings that have outlived their primary use, and creating a plan that utilizes these buildings to grow enough food for the surrounding communities.
Sponsorship: John Edel of Bubbly Dynamics, LLC
Deliverables for IPRO 336: Planning the 21st Century Urban Farm: From High Rise to Neighborhood for the fall 2009 semester
Show less

Title: Study of the action of a four inch grinnell variable pressure alarm valve
Creator: Hotchkin, E. W., Pfaelzer, F. M
Date: 2009, 1910
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofactionoff00hotc
Thesis (B.S.)--Armour Institute of Technology, 1910 B.S. in Fire Protection Engineering,...
Show morehttp://www.archive.org/details/studyofactionoff00hotc
Thesis (B.S.)--Armour Institute of Technology, 1910 B.S. in Fire Protection Engineering, 1910
Show less

Title: Pritzker Mediatheque
Creator: Song, Youkeun
Date: 5/4/2011, 2011-05
Description: This project is about Renovation of Pritzker Park with refurbishing an underutilized urban pocket park, by adding a public community facility.
...
Show moreThis project is about Renovation of Pritzker Park with refurbishing an underutilized urban pocket park, by adding a public community facility.
Sponsorship: Denison, Dirk
Show less

Title: Teacher Knowledge Share (Semester Unknown) IPRO 320
Creator: Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
Date: 2008, 2008-12
Description: The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less

Title: Widget Applications to Enhance the Tru2Way Consumer Experience (sequence unknown), IPRO 312 - Deliverables: IPRO 312 Poster F09
Creator: Alsharief, Yagoob, Aulfata, Muluken, Curtis, Christopher, Dhewaju, Anusuya, Mooney, Kevin, Mutyaba, Kevin, Ndoping, Marco, Onaissi, Samah, Peterson, Naomi, Siwek, Steven, Wallace, Sean, Yi, Won-jae
Date: 2009-12
Description: The IPRO teams objectives are to provide Comcast with feedback from an outside perspective, allowing them to see where their Tru2Way system...
Show moreThe IPRO teams objectives are to provide Comcast with feedback from an outside perspective, allowing them to see where their Tru2Way system needs additional attention or support.
Sponsorship: Comcast
Deliverables for IPRO 312: Widget Applications to Enhance the Tru2Way Consumer Experience for the fall 2009 semester
Show less

Title: Green Building Design Concept & Integration (sequence unknown), IPRO 335 - Deliverables: IPRO 335 Final Report F09
Creator: Avanessian, Aris, Banda, Justine, Bergerson, Joshua, Burke, Jeffrey, Christo, Robert, Dexter, Eric, Kim, Kibum, Mey, Andrew, Okunaga, Jonathan, Razeq, Ali, Schaefer, Jacqueline, Thovar Leon, Adrian, Um, Hye
Date: 2009-12
Description: The scope of this IPRO project spans structural, architectural, foundation, HVAC, lighting and electric system designs, as well as building...
Show moreThe scope of this IPRO project spans structural, architectural, foundation, HVAC, lighting and electric system designs, as well as building cost estimating and professional ethics. The IPRO team will become informed about and apply principles associated with green design concepts, energy sustainability, post occupancy comfort, acoustic design issues, smart building concepts, health issues (abatement of mold- and allergy-causing agents), and safety considerations.
Deliverables for IPRO 335: Green Building Design Concept & Integration for the fall 2009 semester
Show less

Title: COATING OF BORON NITRIDE THIN FILM ON TITANIUM
Creator: Huang, Mairui
Date: 2013, 2013-12
Description: To improve the wear resistance of titanium and extend its service life, coating boron nitride thin films on the surface of titanium matrix was...
Show moreTo improve the wear resistance of titanium and extend its service life, coating boron nitride thin films on the surface of titanium matrix was studied in this work. To obtain surface property enhancement, the samples were coated by isothermal sintering at 1000°C – 1400°C in a vacuum furnace for 2h, 4h or 6h. The microstructure of the thin film was investigated employing X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). To identify the composition of interlayers between BN and Ti, EDS analysis was run through the whole reaction zone. It showed that the BN was being consumed, titanium borides (TiB and TiB2), titanium nitride (TiN1-x), and solid solution of nitrogen in titanium (α-Ti (N)) layers formed at the interface between the BN coating and Ti matrix. Correspondingly, the XRD analysis indicated that TiB, TiB2, TiN, and α-Ti(N) phases were presented in good agreement with the EDS result. The layers grew fast in the sintering process which benefited from the fine grain size and highly oriented layers grown in the reaction zone. However, the well-known parabolic diffusional growth is only part of mechanisms for explaining the reactiondiffusion kinetics. The diffusion paths were obtained from the phase sequences at the interface between BN and Ti and thus could be represented on the isothermal section of the B-N-Ti ternary diagram. Moreover, the influence of the sintering temperature and the length of the actual sintering period on the layer sequences and thickness of the reaction zone were investigated. The micro-hardness test results showed that the Ti matrix with deposited BN thin films exhibited significant increased surface hardness. Obviously, the surface hardness xiii rose along with sintering temperature and holding time, and the hardness could be improved over 50%.
M.S. in Materials Science and Engineering, December 2013
Show less

Title: A Video Annotation and Indexing System (sequence unknown), IPRO 327 - Deliverables: IPRO 327 Brochure F09
Creator: Dhagam, Karthik, Donchev, Alexander, Homawoo, Sergio, Litas, Alexander, Orlichenko, Anton, Osswald, Christian, Petsod, Jason, Rawlings, Ori, Shaffer, Joshua, Smith, Antoinette, Yates, Andrew, Yu, Hee Jeoung
Date: 2009-12
Description: Much information available on the Web is in video format. The problem with this medium is users cannot comment on particular scenes within the...
Show moreMuch information available on the Web is in video format. The problem with this medium is users cannot comment on particular scenes within the videos and there is no method of searching for specific content within the videos. The team proposes to develop a system that will allow users to make fine-grained comments on scenes within the video and then to use these comments to aid in search within videos.
Deliverables for IPRO 327: A video annotation and indexing system for the fall 2009 semester
Show less

Title: SIMULATING THE HESTON MODEL VIA THE QE METHOD WITH A SPECIFIED ERROR TOLERANCE
Creator: Zhao, Xiaoyang
Date: 2017, 2017-05
Description: The Quadratic Exponential (QE) model is a market standard simulation method for the Heston stochastic volatility model. We identify certain...
Show moreThe Quadratic Exponential (QE) model is a market standard simulation method for the Heston stochastic volatility model. We identify certain numerical problems with the standard discretization and modify the original method to correct these problems. We implement our modified QE scheme for the Heston model in the Guaranteed Automatic Integration Library (GAIL)|a suite of algorithms that includes Monte Carlo and quasi-Monte Carlo methods for multidimensional integration and computation of means. GAIL computes answers to satisfy user-defined error tolerances. We also implement variance reduction techniques for our modified QE scheme in GAIL. The numerical results show that our modified scheme is fast and accurate, and satisfies the user-defined error tolerances.
M.S. in Applied Mathematics, May 2017
Show less

Title: THE RELATIONSHIP BETWEEN WORK-FAMILY CONFLICT, SOCIAL SUPPORT AND PERFORMANCE AMONG HEALTHCARE MANAGERS
Creator: Hunt, Mary K.
Date: 2011-05-16, 2011-05
Description: As high performers are of great value in all organizations, understanding factors influencing their ability to maintain strong performance can...
Show moreAs high performers are of great value in all organizations, understanding factors influencing their ability to maintain strong performance can have useful implications for leaders. This study examines the relationship between employees’ performance, their stressors and coping approaches as defined by work-family conflict and perception and enactment of social support. Three hundred and twelve managers in a healthcare organization were categorized based on their performance in the year prior to the study. Results showed that high performers had higher satisfaction and use of supervisor support than moderate performers. The more satisfied managers were with support from their supervisor, coworkers, and friends, the less they reported work-family conflict. Satisfaction and use of support from friends influenced both work-to-family and family-to- work conflict.
M.S. in Psychology, May 2011
Show less

Title: SEISMIC STRUCTURAL ANALYSIS USING INTERVAL GROUND MOTION
Creator: Venezia, Adam
Date: 2011-12-05, 2011-12
Description: Seismic analysis is a crucial procedure for the design of a structure subjected to ground motion. In conventional seismic analysis procedures,...
Show moreSeismic analysis is a crucial procedure for the design of a structure subjected to ground motion. In conventional seismic analysis procedures, a structure is subjected to a limited number of earthquake excitations. Moreover, these procedures do not consider the presence of variations and uncertainties in those excitations. Interval analysis is one method capable of accounting for both of these limitations. In this work, a new method for seismic structural analysis, with interval uncertainty in the response spectrum, is developed, which is capable of obtaining the bounds of the dynamic response of a structure. This method is hereinafter referred to as Interval Ground Motion Analysis (IGMA). In this method, first, various response spectra are combined as an interval function, referred to as an interval response spectrum. Then, the response spectrum analysis is performed using the developed interval response spectrum, and the bounds of the dynamic response of the structure are obtained. It is shown that obtaining these bounds is computationally feasible and does not require iterative procedures such as Monte Carlo simulation. Numerical example problems, which illustrate the developed algorithm, are presented, along with a comparison of solutions obtained by another solution method.
M.S. in Civil Engineering, December 2011
Show less

Title: CONGESTION CONTROL AND PACKET REORDERING FOR MULTIPATH TRANSMISSION CONTROL PROTOCOL
Creator: Ghose, Nirnimesh
Date: 2012-04-20, 2012-05
Description: Modern devices are equipped with multiple network interfaces. Traditionally, only one of these is in use at any given time. However,...
Show moreModern devices are equipped with multiple network interfaces. Traditionally, only one of these is in use at any given time. However, simultaneous use of these mul- tiple interfaces will lead to better user experience. Support for this multi-interface scenario has led to the development of Multipath Transmission Control Protocol or MPTCP. MPTCP, as proposed by the IETF working group mptcp, allows a single data stream to be split across multiple paths. This has obvious benefits for reliability, and it can also lead to more efficient use of network resources. But a major problem in MPTCP is the congestion control and the eventual packet reordering at the desti- nation. Various techniques for congestion control for MPTCP have been given, but the packet reordering at the destination is not considered. Efficient packet reordering schemes can drastically improve the throughput for the MPTCP protocol. Therefore, in this work various available packet reordering techniques available for single path TCP are tested in the multipath situation. These algorithms are Duplicate Selective Acknowledgement (DSACK), Eifel and Forward Retransmission Timeout (F RTO). Various network topologies are simulated in a network simulator ns-3 and measure- ments are taken for various path characteristics to see which algorithm works best for the multipath scenario.
M.S. in Electrical Engineering, May 2012
Show less

Title: Design of a Large Scale Structure (sequence 315), IPRO 315 - Deliverables: IPRO 315 Midterm Presentation F09
Creator: Aguilar-wedge, Carmen, Animashaun, Oladipo, Baur, Alex, Cullen, Michael, Hadi, Shuaib, Hedge, Namrata, Kuo, Steve, Lee, Christopher, Lee, Yongdoo, Rybaltowski, Karol, Scully, Dawveed, Shen, Jie-hua, Yousef, Shadi
Date: 2009-12
Description: Located in Oakbrook, IL the architects and engineers of IPRO 315 will design a 22 story hotel. Together architects and engineers will modify...
Show moreLocated in Oakbrook, IL the architects and engineers of IPRO 315 will design a 22 story hotel. Together architects and engineers will modify and re analyze a structure created by pervious designers, and select any new materials for construction. In creating the hotel students will be responsible for the structural analysis of columns, beams, foundation, steel, and concrete design required to insure all serviceability requirements. The students will be required to follow the 2006 International Building Code, and secure the safety of all possible occupants. Management, leadership, ethics, and teamwork will be an integral part of building a large scale structure as students learn to work together on a “real life” project.
Deliverables for IPRO 315: Design of a Large Scale Structure for the fall 2009 semester
Show less

Title: Control of complex distributed systems with distributed intelligent agents
Creator: Tatara, Eric, Cinar, Ali, Teymour, Fouad
Date: 2007-06
Publisher: ELSEVIER SCI LTD
Description: Control of spatially distributed systems is a challenging problem because of their complex nature, nonlinearity, and generally high order. The...
Show moreControl of spatially distributed systems is a challenging problem because of their complex nature, nonlinearity, and generally high order. The lack of accurate and computationally efficient model-based techniques for large, spatially distributed systems leads to challenges in controlling the system. Agent-based control structures provide a powerful tool to manago distributed systems by utilizing (organizing) local and global information obtained from the system. A hierarchical, agent-based system with local and global controller agents is developed to control networks of interconnected chemical reactors (CSTRs). The global controller agent dynamically updates local controller agent's objectives as the reactor network conditions change. One challenge posed is control of the spatial distribution of autocatalytic species in a network of reactors hosting multiple species. The multi-agent control system is able to intelligently manipulate the network flow rates such that the desired spatial distribution of species is achieved. Furthermore, the robustness and flexibility of the agent-based control system is illustrated through examples of disturbance rejection and scalability with respect to the size of the network.
Endnote format citation for DOI:10.1016/j.jprocont.2006.06.008
Show less

Title: Urban Margins : An Architectural Narrative: Phillips - Final Board
Creator: Phillips, Christopher
Date: 2011-04, 2011-05
Description: Manhattan’s expansion is limited by its context; for decades its growth has been upward and inward. It fills the remaining gaps and leftover...
Show moreManhattan’s expansion is limited by its context; for decades its growth has been upward and inward. It fills the remaining gaps and leftover spaces in its own fabric. As time presses on, this layered context grows in density, accumulating a thickness around the alley, the fire escape, and the rooftop. By resisting the city’s tendency to stifle, one can gather these moments of Manhattan’s past, and channel the interplay of space and narrative.
Show less

Title: A PARAMETRIC STUDY OF THE THERMAL PERFORMANCE OF DIFFERENT WALL SYSTEMS AT VARIOUS CLIMATE ZONES
Creator: Lai, Se Yen
Date: 2013, 2013-12
Description: One of the most common energy conservative measures used is designing an air-tight and a well-insulated envelope. While there is an abundance...
Show moreOne of the most common energy conservative measures used is designing an air-tight and a well-insulated envelope. While there is an abundance of high-efficiency building envelope designs in the market which offer low thermal conductivity and high R-values as well as various studies on the thermal performance of various wall constructions, the results were often based on simplified study model and are not incompliance with the current building code. Most studies also focus on only one particular climate zone and one type of wall construction. This research aims to examine the thermal performance of different types of wall construction based on the traditional building envelope design materials in various climate zones based on insulation and air cavity placements on a non-simplified reference model that is used for construction. Study models developed are incompliance with the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE] 90.1-2010 based on U.S. Department of Energy [DOE] Commercial Prototype Building Model. The thermal performance of the wall will be determined using two different methods. The first method will be using Building Energy Modeling [BEM] software where the exterior wall construction will be modified based on DOE reference models where the results for the overall annual energy consumption [AEC] will be compared. AEC results showed small differences between study models which are negligible. The second method is the Total Thermal Constant [TTC] method, where the thermal lag will be compared. The building structures that will be used are a steel-framed structure which represents a medium office and a wood-framed structure which represents a quick service restaurant. TTC results were able to determine the least favorable study model.
M.S. in Civil Engineering, December 2013
Show less

Title: Online batch/fed-batch process performance monitoring, quality prediction, and variable-contribution analysis for diagnosis
Creator: Undey, C., Ertunc, S., Cinar, A.
Date: 2003-10-01
Publisher: AMER CHEMICAL SOC
Description: An integrated online multivariate statistical process monitoring (MSPM), quality prediction, and fault diagnosis framework is developed for...
Show moreAn integrated online multivariate statistical process monitoring (MSPM), quality prediction, and fault diagnosis framework is developed for batch processes. Batch data from I batches, with J process variables measured at K time points generate a three-way array of size I x K x J. Unfolding this three-way array into a two-way matrix of size IK x J by preserving the variable direction is advantageous for developing online MSPM methods because it does not require estimation of future portions of new batches. Two different multiway partial least squares (MPLS) models are developed. The first model (MPLSV) is developed between the data matrix (IK x J) and the local batch time (or an indicator variable) for online MSPM. The second model (MPLSB) is developed between the rearranged data matrix in the batch direction (I x KJ) and the final quality matrix for online prediction of end-of-batch quality. The problem of discontinuity in process variable measurements due to operation switching (or moving to a different phase) that causes problems in alignment and modeling is addressed. Control limits on variable contribution plots are used to improve fault diagnosis capabilities of the MSPM framework. Case studies from a simulated fed-batch penicillin fermentation illustrate the implementation of the methodology.
Endnote format citation for DOI:10.1021/ie0208218
Show less

Title: Center for Interdisciplinary Education: tA_Final Board 2
Creator: Alvarez, Tomas
Date: 4/20/2011, 2011-05
Description: This project consists of developing an efficient collegiate building in which the disciplines of Business, Mathematics, and Science can...
Show moreThis project consists of developing an efficient collegiate building in which the disciplines of Business, Mathematics, and Science can interact, collaborate, and ultimately create new knowledge by merging existing information. "All disciplines have imported aspects of other fields to clarify their own disciplinary perspectives."
Show less

Title: A UNIFIED BOUNDARY CONTROL LAW FOR DC-DC CONVERTERS USING A NORMALIZED STATE PLANE
Creator: Nie, Yue
Date: 2015, 2015-05
Description: This thesis proposes a unified boundary control law for DC-DC converters (Buck, Boost, and Buck-Boost) which improves both the transient and...
Show moreThis thesis proposes a unified boundary control law for DC-DC converters (Buck, Boost, and Buck-Boost) which improves both the transient and steady state response in comparison to boundary control laws using first or second order switching surface. A new set of switching zones on normalized state plane are defined to decide switching behavior every sample period. Additionally, non-ideal operations and a parameter self-adaptive algorithm are proposed and verified in simulation. The parameter self-adaptive algorithm enhances the system robustness and reduces the parameter sensitivity. The transient bandwidth for the load disturbance rejection and command tracking approaches the physical limits of DC-DC converters. Simulation results are presented to illustrate the major benefits of the proposed uni ed boundary control law.
M.S. in Electrical Engineering, May 2015
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of