Search results

Title: A test of an evaporative condenser to determine the coefficient of heat transmission
Creator: Evans, Robert T.
Date: 2009, 1909
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testofevaporativ00evan
Thesis (B.S.)--Armour Institute of Technology

Title: Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 Ethics F08
Creator: Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
Date: 2008, 2008-12
Description: The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less

Title: A study of motor cycle engine characteristics
Creator: Ott, C. L., Pimstein, S.
Date: 2009, 1916
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofmotorcycl00ottc
Thesis (B.S.)--Armour Institute of Technology

Title: Volumes of Light - A School of the Performing and Visual Arts, Brooklyn.
Creator: Cabal González, Sara
Date: 2012, 2012-05
Description: The school is a proposal for high-level academic performance in the form of an art condenser that will also be used after hours to house...
Show moreThe school is a proposal for high-level academic performance in the form of an art condenser that will also be used after hours to house community art events. Thus, it will act as a catalyst for future college students and serve as a magnet for neighborhood residents. As the art disciplines require, the classroom and their respective studio are integrated and considered as the basic unit that define different volumes for each art form. The massing, orientation, and materiality bring a unique quality of light to those “volumes of light”.
Show less

Title: Center for Interdisciplinary Education: tA_Final Book
Creator: Alvarez, Tomas
Date: 4/20/2011, 2011-05
Description: This project consists of developing an efficient collegiate building in which the disciplines of Business, Mathematics, and Science can...
Show moreThis project consists of developing an efficient collegiate building in which the disciplines of Business, Mathematics, and Science can interact, collaborate, and ultimately create new knowledge by merging existing information. "All disciplines have imported aspects of other fields to clarify their own disciplinary perspectives."
Show less

Title: Sustainable Theme Park and Museum
Creator: Fujishima, Kenta
Date: 5/4/2011, 2011-05
Description: An indoor facility consisting of both theme park and museum components with the integration of green and sustainable elements.

Title: Devices that Assist Blind & Visually-Impaired Individuals in Swimming and Other Exercise Activities (sequence unknown), IPRO 310 - Deliverables: IPRO 310 IPRO Day Presentation F09
Creator: Dykeman, Kimberly, Healton, Michaela, Lipman, Timothy, Ludwig, Ross, Park, Jay, Reilly, Jeffrey, Sarkar, Smita, Sirk, Phillip, Toro, Branden
Date: 2009-12
Description: The objective is to develop, test, and implement assistive technology with the community that promotes safety and improves independence of...
Show moreThe objective is to develop, test, and implement assistive technology with the community that promotes safety and improves independence of blind and visually impaired (BVI) swimmers.
Sponsorship: Chicago Lighthouse for the Blind & Visually-Impaired. Notre Dame University
Deliverables for IPRO 310:Devices that Assist Blind & Visually-Impaired Individuals in Swimming and Other Exercise Activities for the fall 2009 semester.
Show less

Title: SEARCHING ENCRYPTED CLOUD DATA
Creator: Urs, Karthik Mahendra Raje
Date: 2011-05-04, 2011-05
Description: The major setback of the cloud is its inability to induce strong trust in its users. For us, the users of the cloud, to be sure of the...
Show moreThe major setback of the cloud is its inability to induce strong trust in its users. For us, the users of the cloud, to be sure of the security of the data from other users, we have to trust cloud. In most of the cases, say if the data were to be hosted on Microsoft’s servers, we can trust Microsoft in its policies to prevent unauthorized access to it from other users (via hacking). But, the issue that is haunting the cloud is this - ”How can we be sure that our data is safe from Cloud service providers themselves?” The most intuitive solution for the cloud service provider to gain trust is to insist we encrypt our data. That is an irrefutable act of honesty from the cloud. But this has some obvious setbacks, few of which would negate the very advantages of cloud. One such issue that dictates the scope of this thesis is this - Typical cryptographic algorithms are not amenable to search. Now, if we were to implement a search engine on cloud (which has the data encrypted), the native search techniques have to be extended on to the cryptographic domain so that the cloud can perform the tasks of a search engine. This thesis explores the solutions to the above mentioned problem of searching over encrypted data, specifically using a secure pre-processed index approach. Though significant ideas have been proposed in the area, there is no concrete implementation to analyze if it can be used in the industrial setting. The main goal of the thesis is to implement a system which supports a variety of searching techniques. We make use of Amazon EC2 and test out the designed systems to evaluate how feasible they are for immediate consumption by the industry.
M.S. in Computer Engineering, May 2011
Show less

Title: CONTROLLER DESIGN AND DISTRIBUTED CONTROL WITHIN MULTI-AGENT SYSTEMS
Creator: Shao, Quan Min
Date: 2013, 2013-12
Description: None
PH.D in Chemical and Biological Engineering, December 2013

Title: Screech Tones from Rectangular Jets with Spanwise Oblique Shock-cell Structures
Creator: Raman, G.
Date: 1997-01-10
Publisher: Cambridge Univ Press
Description: Understanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft...
Show moreUnderstanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft structures. Although the connection between shock-cell spacing and screech frequency is well understood, the relation between non-uniformities in the shock-cell structures and the resulting amplitude, mode, and steadiness of screech have remained unexplored. This paper addresses the above issues by intentionally producing spanwise (larger nozzle dimension) variations in the shock-cell structures and studying the resulting spanwise screech mode. The spanwise-oblique shock-cell structures were produced using imperfectly expanded convergent-divergent rectangular nozzles (aspect ratio = 5) with non-uniform exit geometries. Three geometries were studied: (a) a nozzle with a spanwise uniform edge, (b) a nozzle with a spanwise oblique (single-bevelled) edge, and (c) a nozzle that had two spanwise oblique (double-bevelled) cuts to form an arrowhead-shaped nozzle. For all nozzles considered, the screech mode was antisymmetric in the transverse (smaller nozzle dimension) direction allowing focus on changes in the spanwise direction. Three types of spanwise modes were observed: symmetric (I), antisymmetric (II), and oblique (III), The following significant results emerged: (i) for all cases the screech mode corresponds with the spanwise shock-cell structure, (ii) when multiple screech modes are present, the technique presented here makes it possible to distinguish between coexisting and mutually exclusive modes, (iii) the strength of shocks 3 and 4 influences the screech source amplitude and determines whether screech is unsteady. The results presented here offer hope for a better understanding of screech and for tailoring shock-containing jets to minimize fatigue failure of aircraft components.
Show less

Title: VALIDATION OF BAKING TO INACTIVATE SALMONELLA IN HIGH-PROTEIN AND HIGH-FAT MODEL FOODS
Creator: Wang, Wenqian
Date: 2017, 2017-07
Description: Baked food products, such as dry pet foods, undergo changes of temperature and water activity (aw) during forced hot air processes. As one of...
Show moreBaked food products, such as dry pet foods, undergo changes of temperature and water activity (aw) during forced hot air processes. As one of the most thermal resistant microorganisms in low-moisture/intermediate moisture foods, Salmonella’s thermal inactivation kinetics during these processes is not well understood and difficult to predict. The objective of this study was to evaluate thermal inactivation kinetics of Salmonella enterica serovar Agona 447967 in model high-protein (HP) and high-fat (HF) multiple-component foods baked in a laboratory-scale oven, as influenced by oven temperature and relative humidity (RH). Model high-protein and high-fat foods, formulated with wheat flour, soy protein and soy oil, were inoculated with Salmonella Agona to a level of ~9 log CFU/g, and mixed to form a homogenous dough. Dough samples (57 mm diameter x 6 mm thick) were baked (3 samples per dwell time, 6 dwell times per condition) in a lab-scale oven at 120°C (10% RH) and 85°C (20%, 35% RH, 50% RH), respectively. Temperature and aw were measured at the surface and geometric center of the product during baking. Processed samples were collected in sterile bags and immediately cooled in an ice-water bath. Salmonella was enumerated on trypticase soy agar supplemented with yeast extract and incubated at 37°C for 24 h. Similar reductions (p>0.05) of 5.12-, 5.11-, 4.55-, and 4.78-log CFU/g were achieved after 40 min at 120°C/10% RH, 90 min at 85°C/20% RH, 50 min at 85°C/35% RH, 8 min at 85°C/50% RH, respectively, in the high-protein model food. Similar results were achieved in the high-fat matrix. The aw at the geometric center of the product (initially at aw =0.98) did not change appreciably during baking, while the aw at the product surface, the location of least lethality, decreased significantly (p<0.05) during baking; the decreases were more pronounced at lower oven RH. The results indicate that thermal inactivation of Salmonella Agona was driven by temperature and relative humidity in the oven. Higher temperature and higher relative humidity level led to greater Salmonella inactivation.
M.S. in Food Process Engineering, July 2017
Show less

Title: NUMERICAL SIMULATION OF AIR FLOW OVER A THIN OIL FILM
Creator: Dziedzic, William M.
Date: 2014, 2014-12
Description: Turbulent boundary layer flow research uses oil film and oil drop interferometry to measure wall shear stress of air flows. Oil film...
Show moreTurbulent boundary layer flow research uses oil film and oil drop interferometry to measure wall shear stress of air flows. Oil film interferometry determines the rate oil decreases on a surface as the function of the shear stress magnitude. Current traditional methods have proven to be accurate but the solution is obtained by assuming a linear height distribution [3]. This assumes a constant shear stress along the oil drop and assures that there is no effect of the oil drop on the incoming boundary layer [3]. This effect maintains the continuity of shear stress at the air/oil interface, but the stream-wise velocity at the interface is discontinuous. It is thought that these approximations contain small errors but this has not been verified for zero pressure gradient turbulent boundary layer [3]. A computational fluid dynamics numerical study was performed to simulate the two-dimensional (2D) and three-dimensional (3D) effects of air flow over an oil drop and the drop’s movement across the channel surface.
M.S. in Mechanical and Aerospace Engineering, December 2014
Show less

Title: Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King (sequence unknown), IPRO 314 - Deliverables: IPRO 314 Final Report F09
Creator: O’leary, Kevin, Petty, Sonya, Qi, Tianshu, Tan, Sophia, Noor, Nashrah, Schleich, Kenneth, Akhtar, Ayesha, Cheng, Eric, Kim, James, Parker, Joseph, Saha, Sougata
Date: 2009-12
Description: The objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Spo...
Show moreThe objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Sponsorship: Gage Park High School
Deliverables for IPRO 314: Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King for the fall 2009 semester.
Show less

Title: EARTH ORIENTATION PARAMETER FAULT MONITOR FOR HIGH INTEGRITY GNSS AVIATION APPLICATIONS
Creator: James Meno, Joel Patrick
Date: 2013-05-01, 2013-05
Description: This paper develops threat models and mitigation techniques for mutually consistent satellite faults that are not detectable using Advanced...
Show moreThis paper develops threat models and mitigation techniques for mutually consistent satellite faults that are not detectable using Advanced Receiver Autonomous Integrity Monitoring (ARAIM) methods but are potentially hazardous to aviation users. Faults in the generation of Earth Orientation Parameters (EOPs), EOP Predictions (EOPPs) and their subsequent processing by the GPS Operational Control Segment (OCS) are of particular interest. In principle, if such faults are not detected by OCS, GPS satellite ephemerides could be corrupted constellation-wide in a consistent way, rendering existing ARAIM algorithms ineffective. The initial credibility of the EOP threat is established by the fact that it is explicitly listed as a potential integrity failure mode in the current GPS Standard Positioning Service Performance Standard (GPS SPS). Additionally, an observed EOP fault occurred on June 17, 2012. The dynamics of EOP faults can be reliably modeled as an initial bias with additive linear time variations. An initial broadcast ephemeris (A) is assumed to be EOP fault free and is verified as such via a ground monitor. If the second ephemeris (B) contains an EOP fault, then all satellite positions computed using ephemeris (B) would be rotated with respect to satellite positions obtained from ephemeris (A). Using the difference between the two computed satellite positions as the monitor 'measurement' in conjunction with the dynamic fault model, the parameters defining the EOP fault can be estimated using weighted least squares estimation. The two monitor components (airborne and ground) are bridged together by an Integrity Support Message (ISM). The ISM is needed to provide airborne users with essential information to bound nominal error distributions and fault prior probabilities. xiii The ISM also provides a means to inform airborne users of which ephemerides have passed civil ground monitor validation. The frequency of ISM updates needed to protect airborne GNSS users from the EOP threat is specified. Finally, global availability analysis show that the inclusion of the EOP fault detection algorithms does not cause any availability loss for LPV-200 aircraft precision approach applications.
M.S. in Mechanical and Aerospace Engineering, May 2013
Show less

Title: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry (sequence unknown), IPRO 333 - Deliverables: IPRO 333 Project Plan F09
Creator: Bonesz, Andrew, Clark, Howard, Douglas, Carlie, Gajdorus, Michael, Gottschall, Keenan, Hendricks, Rachel, Kimball, Clayton, Linares, Jared, Marks, Paul, Mellom, James, Oblenida, Cindy, Pop, Sabina, Stelcel, Carl, Young, Jeremy, Zhou, Raymond
Date: 2009-12
Description: The primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the...
Show moreThe primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the resources of the Museum of Science and Industry (MSI) in Chicago. This partnership endeavors to help the museum's Fabrication Laboratory (Fab Lab) maximize its potential as a resource for museum guests, young and old, as well as for IIT students, staff, and faculty.
Sponsorship: Museum of Science and Industry. Steven Willis- Director, Fabrication Lab
Deliverables for IPRO 333: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry for the fall 2009 semester
Show less

Title: Innovative Uses of Native CAD Files Progress Report June 2011
Creator: Kleps, Stephen M., Menches, Cindy
Date: 2013-09-18, 2011-06
Description: This publication presents an literature review, progress of an environmental scan, and preliminary findings of research for the project...
Show moreThis publication presents an literature review, progress of an environmental scan, and preliminary findings of research for the project entitled Innovative Uses of Native CAD Files.
Sponsorship: Electri International
Show less

Title: Our Energy Future: Lessons in Sustainability AND IPRO Teams for K-12: The Education Outreach Service Learning Cluster (sequence unknown), IPRO 332 - Deliverables: IPRO 332 Poster F09
Creator: Chavez, Jorge, Johnson, Ross, Chin, Jason, Grande, Gina, Lay, Livia, Mccloat, Declain, Nguyen, Nam, Olechno, Patrick, Randle, Jennifer, Tyler Ii, Micheal, Vega, Mayra, Weiner, Andrew, Zajac, Gregory
Date: 2009-12
Description: The mission of the IPRO is to educate the community, focusing mainly on elementary and high school students, on the issues of sustainability...
Show moreThe mission of the IPRO is to educate the community, focusing mainly on elementary and high school students, on the issues of sustainability and energy conservation. The group looks to expand on the work that has been completed in previous semesters, by adding multi-media presentations to enhance the current teaching modules. Previous modules have presented to classrooms simply with information, and the team looks to add upon this by adding interactive and entertaining materials to intrigue the audience.
Deliverables for IPRO 332: IOur Energy Future: Lessons in Sustainability AND IPRO Teams for K-12: The Education Outreach Service Learning Cluster for the fall 2009 semester
Show less

Title: VIBRATIONAL CONTROL OF AN EXOTHERMIC CSTR - PRODUCTIVITY IMPROVEMENT BY MULTIPLE INPUT OSCILLATIONS
Creator: Shu, X. S., Rigopoulos, K., Cinar, A.
Date: 1989-02
Publisher: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Description: A. Cinar et al. (1987) have shown that vibrational control of an exothermic continuous stirred tank reactor (CSTR) by vibrating the total flow...
Show moreA. Cinar et al. (1987) have shown that vibrational control of an exothermic continuous stirred tank reactor (CSTR) by vibrating the total flow rate modifies its behavior and leads to stabilized operation in its unstable steady-state region. Here, the effect of multiple vibrating inputs and the contribution of their phase shift are investigated. Theoretical and experimental results indicate productivity improvement and amplitude reduction in reactor temperature swings by vibrating both input flow rate and input concentrations.
Endnote format citation
Show less

Title: New Housing Model "Flexible Housing Components: IMG_7337_EDIT_Crop"
Creator: Quinn, Aidan
Date: 2012-05-02, 2012-05
Description: This project is a focus on spatial flexibility. The idea is to generate housing components that focuses on flexibility in order to create...
Show moreThis project is a focus on spatial flexibility. The idea is to generate housing components that focuses on flexibility in order to create space that is defined by the user.
Show less

Title: Chicago Intermodal Commuter Transit Development: Strailman_Chris_MastersProject_2011
Creator: Strailman, Chris
Date: 4/27/2011, 2011-05
Description: This project focuses on the connectivity of different forms of transit and different neighborhoods in Chicago. Starting at the scale of city...
Show moreThis project focuses on the connectivity of different forms of transit and different neighborhoods in Chicago. Starting at the scale of city wide transit systems, it narrows down to a specific node and deals with the design and planning of a transit oriented development.
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of

Rights