Search results

Title: Innovative Uses of Native CAD Files Progress Report June 2011
Creator: Kleps, Stephen M., Menches, Cindy
Date: 2013-09-18, 2011-06
Description: This publication presents an literature review, progress of an environmental scan, and preliminary findings of research for the project...
Show moreThis publication presents an literature review, progress of an environmental scan, and preliminary findings of research for the project entitled Innovative Uses of Native CAD Files.
Sponsorship: Electri International
Show less

Title: OPTIMAL SIGNAL TIMING DESIGN FOR URBAN STREET NETWORKS UNDER USER EQUILIBRIUM BASED TRAFFIC CONDITIONS
Creator: Liu, Yi
Date: 2015, 2015-05
Description: In the ever-growing travel demand, traffic congestion on freeways and expressways recurs more frequently at a higher number of locations and...
Show moreIn the ever-growing travel demand, traffic congestion on freeways and expressways recurs more frequently at a higher number of locations and for longer durations with added severity. This becomes especially true in large metropolitan areas. Particular to the urban areas, excessive crowdedness caused by inefficient traffic control also results in urban street networks operating in near or over-saturated conditions, leading to unpleasant travel experience due to long delays at intersections. As a consequence, the recurrent traffic congestion on roadway segments and vehicle delays at intersections inevitably compromise energy efficiency, traffic mobility improvement, safety enhancement, and environmental impacts mitigation. All too often, neither restraining travel demand nor expanding system capacity is desirable and practical. Conversely, effectively utilizing the capacity of the existing transportation system has been increasingly thought of as the solution to congestion relief. With respect to the urban street networks, developing effective means for urban intersection signal optimization becomes essential to reduce intersection delays. Conventional signal timing optimization methods use historical traffic data and assume that traffic flows will remains unchanged after the implementation of new signal timing plans. Traffic flows are assumed to be constant, but in fact, when signal timing plans change, travel times for some travel routes will alter, which requires drivers in the network to adjust their choice of travel routes to arrive at the destinations, and result in redistribution of traffic in the network. Therefore, the effects of interactions between signal timing plans and traffic flows need to be explicitly taken into consideration. This study introduces a new methodology that jointly considers signal timing optimization and traffic assignment in an overall analytical framework that contains model formulations under assumptions consistent with real world situations. Such a framework is well suited for applications in real world cases. Specifically, the overall optimization framework is formulated as a bilevel optimization problem. In the proposed basic model, at the upper level, a traffic signal timing optimization problem for urban network is introduced to minimize system total travel time by optimizing signal green splits. At the lower level, a static user equilibrium problem is formulated for networkwide traffic assignment. In the vehicle delay estimation, the time-dependent stochastic delay model in the 2010 Highway Capacity Manual (HCM 2010) is employed and formulated as Variational Inequality constraints, what allow the state-of-the-art MPEC solver, GAMS/NLPEC, to solve the problem for a local optimal effectively and efficiently. The bi-level optimization model is first tested using a small network (the test network) and a computational experiment using a subarea network in the Chicago central district is conducted to assess the practicality of the model formulation in real world applications. In order to import more reality to the basic model and also consider the potential system benefit that comes from different signal phasing design, an enhanced model is developed based on the basic model by employing integer and binary variables. Formulating the problem with binary variables allows for the selection of proper phasing design. Heuristic solution methods are proposed and tested using the test network.
Ph.D. in Civil Engineering, May 2015
Show less

Title: Understanding Construction Workers’ Risk Decisions Using Cognitive Continuum Theory
Creator: Menches, Cindy L., Saxena, Jaya
Date: 2013-09-19, 2013-09-19
Description: The goal of the research presented in this article was to construct a theory about the influence of decision cues on intuitive and...
Show moreThe goal of the research presented in this article was to construct a theory about the influence of decision cues on intuitive and deliberative decision-making in high-hazard construction environments. Drawing from Cognitive Continuum Theory, the article specifies a framework for understanding why and how construction workers make decisions that lead to taking or avoiding physical risks when they encounter daily hazards. A secondary aim of the research was to construct a set of hypotheses about how specific decision cues influence whether a worker is more likely to engage their intuitive impulses or to use careful deliberation when responding to a hazard. These hypotheses are described in this article, and the efficacy of the hypotheses was evaluated using cross-tabulations and nonparametric measures of association. While most of the associations between decision cues and decision mode (i.e., intuition or deliberation) identified in this data set were generally modest, none of the associations were statistically zero, thus indicating that further research is warranted based on theoretical grounds. A rigorous program of theory testing is the next logical step to the research, and the article thus concludes with numerous suggestions for extending the research and testing the proposed hypotheses.
Show less

Title: DEGRADATION RATE MODEL TO ESTIMATE SOIL CARBON SEQUESTRATION
Creator: Zhai, Wenjuan
Date: 2016, 2016-05
Description: Concern over climate change as a consequence of carbon dioxide (CO2) emissions from human activities has resulted in efforts to better...
Show moreConcern over climate change as a consequence of carbon dioxide (CO2) emissions from human activities has resulted in efforts to better understand potential mitigation measures such as carbon sequestration in soils. Processes shaping natural carbon sequestration may be used to remove excess CO2 from combustion and other anthropogenic sources of carbon, and, alleviate concerns over climate change. Land application of biosolids is a process that increases the amount of soil carbon sequestration and may produce carbon credits in accordance with the definition of UN Climate Change Convention. A dynamic degradation rate model (DRM) has been developed based on a mass balance and first order kinetics to describe the soil organic carbon (SOC) decomposition process, which provides insights on carbon sequestration due to microbial biomass, SOC, CO2 emission rates, residence time of sequestered carbon, and biomass to biosolids ratios. A curve fitting approach was used to produce a best fit average degradation rate for biosolids degradation and microbial biomass yield. This study employed a 34-year biosolids application database from the literature to determine the amount of carbon sequestered in 41 strip-mined Illinois fields. The DRM application identifies two SOC phases in soil. Soil organic carbon gain in phase one (first 10 yrs) is primarily due to biosolids C application remaining and accumulation while in phase two, SOC gain is due to biomass or C sequestration. Carbon sequestration changes with time relate to variations in biosolids application amounts (10 and 18 Mg ha-1 yr-1), different degradation rate constants (0.04yr-1 to 0.16yr-1), and biomass yields (35 to 40%). Additionally, comparison between model simulation results and laboratory resultsdetermine the amount of carbon sequestered in 41 strip-mined Illinois fields. The DRM application identifies two SOC phases in soil. Soil organic carbon gain in phase one (first 10 yrs) is primarily due to biosolids C application remaining and accumulation while in phase two, SOC gain is due to biomass or C sequestration. Carbon sequestration changes with time relate to variations in biosolids application amounts (10 and 18 Mg ha-1 yr-1), different degradation rate constants (0.04yr-1 to 0.16yr-1), and biomass yields (35 to 40%). Additionally, comparison between model simulation results and laboratory resultsdetermine the amount of carbon sequestered in 41 strip-mined Illinois fields. The DRM application identifies two SOC phases in soil. Soil organic carbon gain in phase one (first 10 yrs) is primarily due to biosolids C application remaining and accumulation while in phase two, SOC gain is due to biomass or C sequestration. Carbon sequestration changes with time relate to variations in biosolids application amounts (10 and 18 Mg ha-1 yr-1), different degradation rate constants (0.04yr-1 to 0.16yr-1), and biomass yields (35 to 40%). Additionally, comparison between model simulation results and laboratory resultsdetermine the amount of carbon sequestered in 41 strip-mined Illinois fields. The DRM application identifies two SOC phases in soil. Soil organic carbon gain in phase one (first 10 yrs) is primarily due to biosolids C application remaining and accumulation while in phase two, SOC gain is due to biomass or C sequestration. Carbon sequestration changes with time relate to variations in biosolids application amounts (10 and 18 Mg ha-1 yr-1), different degradation rate constants (0.04yr-1 to 0.16yr-1), and biomass yields (35 to 40%). Additionally, comparison between model simulation results and laboratory results provided by a yearlong study indicates that higher temperatures and moisture content and finer soils are related to larger degradation rates. To summarize, this study has the following contributions: (1) developed a degradation rate model which simulates the biosolids degradation process in soil and identifies two SOC phases in soil, and quantifies the biosolids degradation rate constant, biomass yield, and the C sequestered amount for multiple and long term soil application; (2) assessed the effect of changes in the amount of biosolids applied, soil type, and weather conditions on the C degradation rate by comparing model results to laboratory data; and (3) provides an easy quantitative method for predicting C sequestration from biosolids added to soil.
Ph.D. in Environmental Engineering, May 2016
Show less

Title: EFFECT OF TEMPERATURE, MOISTURE CONTENT AND SOIL SURFACE AREA ON THE BIOLOGICAL DEGRADATION OF BIOSOLIDS ADDED TO SOIL
Creator: Wen, Dongqi
Date: 2016, 2016-05
Description: The objective is to develop and apply an organic matter degradation model (OMDM) that predicts changes in the biological degradation of...
Show moreThe objective is to develop and apply an organic matter degradation model (OMDM) that predicts changes in the biological degradation of organic matter added to soils as a function of soil temperature, moisture content and mineral surface area using data from field and laboratory measurements. A one year long laboratory study was conducted to determine biosolids microbial degradation rates (21 ˚C and 20% moisture content) for soils from eight different fields Biosolids microbial degradation rates were also determined for the eight soils under field condition (10 ˚C and 10% moisture content) by applying a degradation rate model (DRM). The total mineral surface areas for 27 soil samples were also determined. Regression analysis revealed that the degradation rate was positively associated with mineral soil surface area (R2=0.85) and that the biosolids application rate is not significantly associated with the biosolids degradation rate (p value =0.35>0.01). The OMDM determines a decomposition rate of 1.04 yr-1 at 30 ˚C, 20% moisture content, and 10 m2/g soil and provides correction factors for changes in soil temperature, moisture, and mineral surface area. The model predicted in changes of the biological degradation rate of biosolids added to soils with mineral surface areas that vary from 1 to 10 m2/g soil under laboratory and field conditions. A comparison of the measured and simulated degradation rates for eight different soils produced R2 = 0.87 for field data. The model was also able to predict the degradation rate of biosolids for 19 additional soils under field conditions (R2=0.89). The model was also applied to agricultural plant litter. The estimated degradation rates are 0.45 yr-1 corn stover, 0.35 yr-1 oats, 0.26 yr-1 wheat, and 0.13 yr-1 millet at 30 ˚C, 20% moisture content and 10 m2/g. This study demonstrates that the effects of environmental conditions and soil mineral surface area have a significant impact on degradation rates of organic matter and must be considered when assessing degradation rates for organic matter added to soil. Higher temperatures and moisture content and finer soils are related to larger degradation rates.
Ph.D. in Environmental Engineering, May 2016
Show less

Title: Jobsite Characteristics that Influence Improvised Decision-making on Construction Sites
Creator: Kleps, Stephen M., Menches, Cindy
Date: 2013-10-07, 2013-10-07
Description: This article examines the relationship between specific construction project characteristics and the degree and speed that the foremen are...
Show moreThis article examines the relationship between specific construction project characteristics and the degree and speed that the foremen are able to improvise in response to disruptive events on the jobsite. Specifically, characteristics such as the number of crew members working under the supervision of a foreman, the occupancy status of the project (i.e., occupied or unoccupied) during construction, the stage of completion of the project, and the levels of turbulence, time pressure, cooperation, collaboration, and organization, were examined. Using a multilevel regression modeling approach, an analysis of 244 disruptions reported by 50 foremen was conducted to determine whether the construction project characteristics could predict more or less improvisation and faster or slower improvisation by the foreman. The findings indicate that on construction projects that are rated by the foremen as more organized, the foremen can make more modest improvised decisions to resolve a disruption, but that on construction projects that were rated by the foremen as more collaborative (i.e., involved joint decision-making), a greater degree of improvisation was deployed. In addition, it was found that on sites that were rated by the foremen as more cooperative (i.e., involved greater willingness to help each other), the foremen required more time to improvise their decisions.
Sponsorship: National Science Foundation
Show less

Title: DEVELOPMENT OF A NEW EMERGENCY EVACUATION SYSTEM FOR MINES
Creator: Qian, Qingyi
Date: 2011-08, 2011-07
Description: Underground mining is a very high risk industry. There are many potential hazards in the underground mining these include fire, explosion,...
Show moreUnderground mining is a very high risk industry. There are many potential hazards in the underground mining these include fire, explosion, inundation, roof collapse, toxic gases, chemical pollution, etc. Over past centuries, in US alone, more than 100,000 miners lost their life in different accidents. The primary safety methods used in underground mines concentrate on the monitoring of the hazardous gases, fire detection and ventilation. Using advanced instruments and monitoring techniques have significantly reduced the accidents in the modern mines. However despite the advancement of these monitoring facilities, accidents still occur in underground mining annually around the world, and many miners were killed because they were trapped and unable to escape due to blocked of exit access. This thesis describes a new development of an emergency evacuation system in underground mines and analyzes the advantages and disadvantages of the system. It is expected that the new system will greatly improve the emergency exit methods and save more lives in the future. The new emergency evacuation system consists of vertical concrete mineshaft, high capacity mineshaft elevators, surface terminal and underground support structures. In addition, the study of numerical simulation was carried out to observe the ground response during excavation. A typical ground profiles for underground mining in south part of China was used in this analysis. The results selected from shaft excavation simulation indicate that fluid drilling method effectively prevents the soil around mineshaft from collapse hazard. Compared to soil strength, soil stiffness has a significant influence on the soil response induced by excavating shafts.
Ph.D. in Civil Engineering, July 2011
Show less

Title: A diary study of the disruption experiences of crew members on a jobsite (Working Paper)
Creator: Menches, Cindy L., Chen, Juan
Date: 2012-06-01, 2012-06-01
Description: This article demonstrates the use of a diary technique in a construction setting. The advantage of a diary study over other methods for...
Show moreThis article demonstrates the use of a diary technique in a construction setting. The advantage of a diary study over other methods for capturing subjective experience is its ability to capture the thoughts, decisions, actions, and emotions of individuals in situ – while they are working in their natural setting – at multiple points in time during an individual’s workweek. Hence, the diary method is uniquely designed to answer questions about group-level trends as well as individual behavior. The specific goal of the study reported in this article was to derive an understanding of the types of fast decisions and actions that are made following a workflow disruption and how the disruption impacts the worker’s state of mind. The analyses revealed that there was a group-level positive correlation between experiencing a disruption and initiating a fast improvised decision and action. However, some workers tended to improvise frequently when disrupted while others did not. The analyses also revealed that the workers’ emotions fluctuated throughout the week, and two emotions – determined and interested – tended to decline following a disruption. But, some of the workers also experienced increases in their negative emotions while others did not, suggesting that not all workers react in the same way to disruptions. Consequently, the diary technique provides a novel way to identify the impact of disruptive events on worker decision-making and performance.
Sponsorship: National Science Foundation
Show less

Title: OPTIMAL DECISION-MAKING OF INTERDEPENDENT TRANSPORTATION INVESTMENT ALTERNATIVES UNDER RISK AND UNCERTAINTY
Creator: Zhou, Bei
Date: 2012-07-12, 2012-07
Description: With increasing demand for a more efficient transportation system and decreasing budget levels, transportation investment decision-making that...
Show moreWith increasing demand for a more efficient transportation system and decreasing budget levels, transportation investment decision-making that aims to select the optimal project portfolio which yields maximized overall networkwide benefits in terms of economy, society and environment has increasingly become important. This dissertation has conducted an in-depth investigation into project evaluation and project selection that are crucial steps of transportation decision-making. It begins with information search through a review of existing methods for project evaluation and selection. Several limitations of existing methods have been revealed. In particular, they are in lack of considerations in network impacts of a single investment project, interdependencies of simultaneously implementing multiple projects, and restrictions of total risk of overall benefits of selected projects within an acceptable level. Then, a new methodology is proposed for networkwide traffic assignments, project evaluation, and project selection. A state-of-art large scale transportation simulation software, the TRansportation ANalysis and SIMulation System (TRANSIMS) toolbox, is utilized to perform networkwide dynamic traffic assignments to general redistributed traffic volumes after project implementation needed as inputs for project evaluation. For project evaluation, a life-cycle cost analysis approach is developed to consider all agency costs and user costs in the service life-cycle of two primary categories of highway facilities: pavements and bridges. In order to enhance the robustness of analytical results, risk and uncertainty of input factors concerning traffic volumes, project costs, and discount rates are incorporated into the life-cycle cost computation using @Risk Palisade software, Version 5.5. For project selection, two-stage enhanced Knapsack model, hypergraph Knapsack, and two-stage hypergraph Knapsack model are proposed to choose the best sub-collection of interdependent projects to yield maximized overall benefits at various budget levels, while controlling the total risk within an acceptable level. In terms of two-stage Knapsack model, the Markowitz mean-variance model is utilized for stage-one optimization to generate minimized total risk of all projects subject to constraints of available budget and minimum benefits to be expected for individual projects. At the second stage, the Knapsack model is enhanced by adding stage-one optimization solution as one more constraint. Such a treatment could help control the total risk of overall benefits of all selected projects at a desirable level. Moreover, a hypergraph Knapsack model is introduced to capture project network impacts and interdependency relationships. In order to simultaneously address issues of networkwide project impacts, interdependencies, and total risk levels, a two-stage hypergraph Knapsack model is developed. Efficient solution algorithms are developed and coded to Frontline Solver Xpress V55 software to solve the two-stage Knapsack model, hypergraph Knapsack model, and two-stage hypergraph Knapsack model, respectively. Three computational studies are performed to apply the proposed methodology using two sets of data, including six-year data on 672 candidate projects proposed by Indiana Department of Transportation for state highway programming and 6 mega projects proposed by Illinois State Toll Highway Authority for tollway network major capital improvements. It has generally found that the use of two-stage Knapsack model could readily control the total risk of overall benefits of selected projects at a desirable level, but it may result in significant changes in the overall benefits for different budget levels where significant differences in risks are associated with individual projects. The hypergraph Knapsack model could effectively handle issues of networkwide project impacts and interdependency relationships. However, the two-stage hypergraph Knapsack model appears to be most robust in that it could simultaneously resolve the issues of networkwide project impacts, interdependency relationships, and total risks of overall project benefits, thus generating most reliable information to support rational transportation investment decision-making.
Ph.D. in Civil Engineering, July 2012
Show less

Title: MONITORING, MODELING, AND TREATMENT OF ODORS/ODORANTS AT WATER RECLAMATION PLANTS
Creator: Zhang, Yanming
Date: 2012-04-23, 2012-05
Description: A thorough study including odor monitoring, modeling and treatment as three important aspects of odor control in WRPs has been performed in...
Show moreA thorough study including odor monitoring, modeling and treatment as three important aspects of odor control in WRPs has been performed in this research. Measurement of H2S emissions from odor sources was proven to be an essential step in odor monitoring program. The H2S emission rates were measured from various sources throughout a WRP for 9 sampling events during winter and summer. During summer, both the average and the maximum emission rates of H2S from liquid treatment processes increased significantly compared to those measured during winter. However, for solids-handling processes, the emission rates remained constant because sludge characteristics did not vary throughout the year. The total sulfide concentrations present in liquid treatment processes were higher than those in preliminary and primary treatment units but at much lower levels in secondary treatment. Rates of H2S emission from the headworks were correlated to daily average wastewater temperature, TKN concentration, and flow rate. AERMOD was used as the modeling tool to evaluate the odor impact of Egan WRP on the surrounding communities. The emission rates could significantly affect the modeling results. Long-term H2S monitoring increases the possibility of developing the proper emission rate for the worst-case scenario. Excluding the modeling during the night would avoid overestimation of odor impact and excessive odor control. In the laboratory-scale study of O3 oxidation of H2S, O3 oxidation was proven to be a fast and effective method to remove H2S from the odorous air emitted from wastewater treatment processes. The increased initial ratio of O3/H2S enhances the removal rate of H2S. The consumption ratio of O3/H2S is a function of input reactant ratios. A multiple linear regression model (R2=0.84) has been developed to predict the H2S residual for given initial H2S and O3 concentrations and reaction time. The increased moisture content of the odorous air enhanced the H2S removal while DMS and DMDS inhibit H2S removal by competing for the limited O3 supply.
Ph.D. in Environmental Engineering, May 2012
Show less

Title: Development and Application of an Occupational Odor Hazard Index
Creator: Wang, Tingting
Date: 2011-04-24, 2011-05
Description: Odors emitted from wastewater treatment and sludge processing facilities may lead to employee complaints regarding discomfort, stress or...
Show moreOdors emitted from wastewater treatment and sludge processing facilities may lead to employee complaints regarding discomfort, stress or disease, and affect productivity and worker turnover in Water Reclamation Plants (WRPs). This study reports and assesses a comprehensive method that estimates the odor perception and associated hazards from exposures to odors in a post-digestion dewatering building in a WRP and its vicinity areas. An Odor Reference Concentration (ORfC) is developed as an index of acceptable odor level. This index is applied to ensure that the majority of building occupants (80 percent or more) do not perceive the odor. This index is developed to fill the lack of a uniform standard and method to assess hazard of exposed individuals to odors in occupational environments and to regulate odor exposures.
A comprehensive odor and odorant concentration database was formulated by a monitoring study in the occupational environment of a post-digestion dewatering building. The presence of odorants in the building are at concentrations below occupational exposure limits but higher than odor detection threshold values. This finding indicates that reducing odorant concentrations below exposure limits does not assure an odor-free environment. A model is formulated and validated for this dewatering building associating odor perception with concentrations of total sulfur compounds and relative humidity and is used for prediction of indoor odor concentrations under various conditions. Odor and odorant emission rates as the strength of sources are input variables of the indoor air quality model. In this study, odor and odorant emission rates from freshly dewatered biosolids in a dewatering building were measured using two widely used dynamic methods: the USEPA flux chamber and wind tunnel, and results from the two methods are not significantly different. Comparison of the two methods indicates that both methods can be used to estimate odor and odorant emission rates but the most effective and efficient method depends on prevailing environmental conditions. The ORfC established based on the comprehensive odor and odorant concentration database for this dewatering building is 13D/T (dilution to threshold). This index is used to evaluate seven control strategies recommended to reduce odor levels. If indoor odor concentrations in the occupational environment exceed the ORfC, then the hazard of odor exposures is unacceptable. Deterministic results of this study indicate that if appropriate control strategy is applied, odor concentration in the dewatering building would reach to below levels that cause unnecessary stress and other effects. The control strategy focus of this work is reduction of the indoor odor perception. But indoor control strategies must not cause outdoor odor problems to surrounding residential areas. Therefore, the potential impact of the control strategy recommended is also investigated in this thesis using the US EPA recommended air dispersion modeling AERMOD. Predictions of hydrogen sulfide concentrations at surrounding areas of the plant indicate that only one strategy, which proposes to add a new exhaust system in the dewatering building, would cause the ambient hydrogen sulfide concentration to be 7% higher than the odor detection threshold; other six strategies would not induce odor annoyance to surrounding areas. Acute and long-term ambient hydrogen sulfide exposure limits based on human health and irritation effects would not be violated under any of the seven control strategies.
Ph.D. in Environmental Engineering, May 2011
Show less

Title: Emotional reactions to variations in contract language
Creator: Menches, Cindy L., Dorn, Lawrence
Date: 2012-07-20, 2012-07-25
Description: This article introduces a theory of emotion-driven behavior in construction contracting and provides support for this theory by presenting the...
Show moreThis article introduces a theory of emotion-driven behavior in construction contracting and provides support for this theory by presenting the quantitative results of a study on the emotional reaction of individuals to the language in contract clauses. Four different versions of the standard Delay Clause found in most construction contracts were extracted from four different contracts and were presented to a group of 27 individuals. Participants rank ordered the clause versions from 1 (most negative) to 4 (most positive). Overall, Clause Version 2 was ranked as having the most negative contract language, with nearly 75% of the participants ranking it as most negative. In contrast, Clause Version 4 was ranked as having the most positive contract language, with over 50% of the participants ranking it as most positive. Participants likewise selected negative emotion words to describe their reaction to Clause Version 2 and positive emotion words to describe their reaction to Clause Version 4. The findings suggest that contract clauses that contain negative language do tend to generate negative emotional reactions while positive contract language do tend to generate positive emotional reactions.
Show less

Title: NSF Annual Report 2012 on Flexible Decision-making in Response to Disruptive Events on Construction Sites
Creator: Menches, Cindy L., Chen, Juan
Date: 2012-06-29, 2012-06-29
Description: This 2012 annual research report submitted to the National Science Foundation describes: (1) involved people, (2) research activities, (3)...
Show moreThis 2012 annual research report submitted to the National Science Foundation describes: (1) involved people, (2) research activities, (3) research findings, (4) training and development, (5) outreach activities, (6) publications, and (7) contributions for rant number CMMI-1100514, Flexible Decision-making in Response to Disruptive Events on Construction Sites.
Sponsorship: National Science Foundation Award Number: CMMI-1100514
Show less

Title: PIEZO-BARKHAUSEN PULSE SIGNAL ANALYSES (BPSA) AND DETERMINATION OF THE FATIGUE LIFE OF AISI-1018 STEEL NEAR THE ENDURANCE LIMIT
Creator: Nunez-moreno, Federico Alejandro
Date: 2014, 2014-05
Description: A series of fatigue tests were performed on two different types of steels named Steel A (annealed and decarbed AISI-1018 steel), and Steel B ...
Show moreA series of fatigue tests were performed on two different types of steels named Steel A (annealed and decarbed AISI-1018 steel), and Steel B (annealed and polished AISI-1018 steel), carried out to separation or to a maximum of 10,000,000 cycles (which was taken to be equivalent to infinite life). Strain levels ranging from 0.0014 in/in (0.0014mm/mm) down to 0.0008in/in (0.0008mm/mm) were used to execute all experimental load tests at a stress ratio R=-1 (complete reversal). An MTS machine was used for these trials. At the same time, magnetic fields and piezo-Barkhausen pulses were recorded by means of a flux gate magnetometer and a copper coil connected to a series of signal filters and amplifiers. Results were used to construct the classical S-N Whöler curve for both steels, as well as in exhibiting the behavior of the magnetic parameters (magnetic excursions, dominant frequencies of the magnetic signals) coupled to the fatigue lives of the samples tested. To describe such couplings, a set of correlations were introduced among the monitored variables as functions of testing time and applied strain. Also, a fractography analysis of the crack patterns using a scanning electron microscope was performed to represent statistically the geometry of “dimples” and fatigue striations from the inception of the crack, until the formation of a shear lip at the final stages of the crack. It was found that the magnitude of the mean amplitude of the piezo-Barkhausen pulses at early stages of the test is correlated to a mid-level energy of cracking, and thus explains the geometry of fatigue striations near the initiation of the crack at higher strain levels, compared to the geometry of the fatigue striations at lower strain levels. x xvi A joint analysis of the amplitudes of the magnetic excursions recorded in time, and the dominant frequencies of the magnetic signals were found to be discriminators of the elastic and plastic behavior of both types of steel. Furthermore the observed magnetic parameter variations determined in a clear way the endurance limit for each type of steel; these values also are in agreement with the strain level for which fatigue lives were greater than 10,000,000 cycles. Based on these results a “bell analogy” for interpreting the fatigue behavior is introduced. Bridge engineering applications and further research is also discussed.
PH.D in Civil Engineering, May 2014
Show less

Title: CYBER-PHYSICAL SYSTEM FOR A WATER RECLAMATION PLANT: BALANCING AERATION, ENERGY, AND WATER QUALITY TO MAINTAIN PROCESS RESILIENCE
Creator: Zhu, Junjie
Date: 2015, 2015-07
Description: Aeration accounts for a large fraction of energy consumption in conventional water reclamation plants (WRPs). Although process operations at...
Show moreAeration accounts for a large fraction of energy consumption in conventional water reclamation plants (WRPs). Although process operations at older WRPs can satisfy effluent permit requirements, they typically operate with excess aeration. More effective process controls at older WRPs can be challenging as operators work to balance higher energy costs and more stringent effluent limitations while managing fluctuating loads. Therefore, understandings of process resilience or ability to quickly return to original operation conditions at a WRP are important. A state-of-art WRP should maintain process resilience to deal with different kinds of perturbations even after optimization of energy demands. This work was to evaluate the applicability and feasibility of cyber-physical system (CPS) for improving operation at Metropolitan Water Reclamation District of Greater Chicago (MWRDGC) Calumet WRP. In this work, a process model was developed and used to better understand the conditions of current Calumet WRP, with additional valuable information from two dissolved oxygen field measurements. Meanwhile, a classification system was developed to reveal the pattern of historical influent scenario based on cluster analysis and cross-tabulation analysis. Based on the results from the classification, typical process control options were investigated. To ensure the feasibility of information acquisition, the reliability and flexibility of soft sensors were assessed to typical influent conditions. Finally, the process resilience was investigated to better balance influent perturbations, energy demands, and effluent quality for long-term operations. These investigations and evaluations show that although the energy demands change as the influent conditions and process controls, in general, aeration savings could be up to 50% from the level of current consumption; with a more xix complex process controls, the saving could be up to 70% in relatively steady-state conditions and at least 40% in relatively challenging transient conditions. The soft sensors can provide reliable and flexible performance on target predictions. The plant can still maintain at a similar level of process resilience after 50% aeration saving, even during long-term perturbations. Overall, this work shows that it is well feasible to provide more cost-effective operations at the Calumet WRP, and meanwhile influent perturbations, effluent quality, and process resilience are well in balance. Keywords: Energy, aeration, effluent quality, perturbation, resilience, water reclamation plant.
Ph.D. in Environmental Engineering, July 2015
Show less

Title: Using ecological momentary assessment to understand a construction worker’s daily disruptions and decisions (Working Paper)
Creator: Menches, Cindy L., Chen, Juan
Date: 2012-06-01, 2012-06-01
Description: Capturing the momentary decisions and actions made by construction workers in response to workflow disruptions is challenging because, until...
Show moreCapturing the momentary decisions and actions made by construction workers in response to workflow disruptions is challenging because, until now, there has not been a minimally-disruptive data collection method that allows workers to identify their decision process “in the moment.” However, an Ecological Momentary Assessment (EMA) method – designed to capture momentary work experiences in natural settings – can provide researchers with detailed information about the daily challenges experienced by workers during the course of performing their tasks. An explanation of the method is provided, along with examples of the types of research questions that can be addressed and appropriate analysis techniques. The EMA method is being used on a federally-funded research program in the United States that is investigating how construction workers adapt to workflow disruptions by improvising their decisions and actions. Consequently, this article demonstrates the use of the method by presenting an idiographic study of William, an electrical construction worker. The evaluation of William’s disruptions, decisions, and actions elucidated an important relationship: every one of William’s disruptions required an improvisational action in order to continue working. The EMA method opens the door to the development of new theories about rapid decisions and subsequent actions on construction sites.
Sponsorship: National Science Foundation
Show less

Title: AN INTRINSICALLY CONDUCTING POLYMER-BASED COATING SYSTEM FOR CORROSION PROTECTION OF STEELS
Creator: Yu, Qifeng
Date: 2016, 2016-12
Description: Among the various corrosion protection strategies for structural steels, coating techniques provide the most cost-effective protection and...
Show moreAmong the various corrosion protection strategies for structural steels, coating techniques provide the most cost-effective protection and have been used as the primary mode for corrosion protection. Existing coating techniques have been used mainly for their barrier capability and all have a limited service life. In this research work, a waterborne two-strand polyaniline: poly (acrylic acid) complex was synthesized and utilized to fabricate the primer layer of a two-layer coating system. The techniques of Scanning Kelvin Probe Force Microscopy (SKPFM) and Electrochemical Impedance Spectroscopy (EIS) were used to evaluate the anti-corrosion capability of the polymeric complex when mixed in an epoxy matrix and coated on steel samples as the primer layer. The evaluation results show that coating systems including a PANi-based primer has measurable anticorrosion capability and the anti-corrosion capability of PANi-based primer depends on the usage of PANi and the type of matrix material of the primer layer. In the laboratory condition, a prototype two-layer coating system including the PANi-based primer and a polyurethane topcoat was manufactured. The ASTM Salt-Spray Test and EIS were used to prove the anti-corrosion performance of the prototype using a two-layer, polyurethane-over-epoxy system (no PANi) as the control system. After the proof of concept, a non-waterborne epoxy was used to fabricate a different PANi-based primer. The two types of primers and two other commercial primers (a zinc-rich primer and an epoxy-only primer) were used to make a total of eight two-layer coating systems using two widely used topcoats. Salt-Spray Test, Cyclic Salt Fog/UV Exposure Test, Pull- Off Adhesion Test, and the techniques of EIS, SKPFM, and Scanning Electron Microscope (SEM) were used to evaluate the long-term performance of the eight systems. Based on the laboratory-based recommendations, six groups of two-layer coating systems were then subjected to the outdoor-exposure test to evaluate their anti-corrosion durability at two testing sites. The field durability of the coating systems was evaluated in terms of their surface gloss reduction, color change, adhesion change and surface deteriorations. The matrix material in which the PANi is mixed plays an important role in the longterm anti-corrosion performance of coatings. The waterborne epoxy is effective in dispersing PANi nano-particles and has zero VOC; however, it does not bond to the steel surface as strongly as the regular non-waterborne epoxy. The topcoat material also plays an important role in the long-term anti-corrosion performance of coatings; polyurethane has higher durability than epoxy as a topcoat material. The PANi-based systems possess long-term corrosion protection comparable to the performance of the conventional zincrich three-layer system based on the one-year field evaluation.
Ph.D. in Civil Engineering, December 2016
Show less

Title: AUTOMATED PROGRESS CONTROL USING LASER SCANNING TECHNOLOGY
Creator: Zhang, Chengyi
Date: 2013, 2013-05
Description: Assessing progress in different construction activities at the end of every payment period is time consuming and requires specialized...
Show moreAssessing progress in different construction activities at the end of every payment period is time consuming and requires specialized personnel employed by the contractor and the owner. Automatic progress control that requires a minimum amount of human involvement could reduce the time spent on this activity, reduce the number of personnel used, reduce the cost involved, reduce disagreements between contractor and owner, and add to the overall efficiency of project management. Attempts have been made in the past to resolve this issue using image processing and other techniques but the results have not been satisfactory. A new attempt was made to set up a system that can assess progress control with minimum human input and the results are presented in this paper. The experiment made use of laser scanning technology and was conducted both in laboratory conditions and construction sites. The initial results from laboratory condition appear to be promising but there are still obstacles to surmount. The system is robust and accurate in laboratory conditions and constitutes proof of concept. Improvements are made to accelerate the registration process of multiple scans, to reduce the noise data, to recognize objects of irregular shape, and to assess the practicality and economic feasibility of such a system when applying this system in real construction sites. Keywords: Construction scheduling, progress control, laser scanning
PH.D in Civil Engineering, May 2013
Show less

Title: LONG-TERM AEROBIC AND ANAEROBIC TRANSFORMATIONS OF ORGANIC MATTER IN ANAEROBICALLY DIGESTED BIOSOLIDS
Creator: Lukicheva, Irina
Date: 2012-12-05, 2012-12
Description: Long-term anaerobic storage of biosolids in a lagoons type of system as a post-treatment to anaerobic digestion is a proven process for...
Show moreLong-term anaerobic storage of biosolids in a lagoons type of system as a post-treatment to anaerobic digestion is a proven process for further pathogen reduction to produce Class A biosolids. At the same time, final biosolids product could develop odors during storage and handling, limiting the flexibility of biosolids utilization. The goal of this research was to study properties of biosolids under different lengths of aging time to determine the stability of final product for its odor potential. Field lagoons of Metropolitan Water Reclamation District of Greater Chicago were sampled to estimate the spatial and temporal variations in the physical-chemical properties and biological stability indicators, namely, total solids, volatile solids, pH, electric conductivity, total Kjeldahl nitrogen, ammonia-N, nitrite/nitrate-N, accumulated oxygen uptake for the 20-hour respirometric test, soluble protein concentration and headspace concentrations of volatile sulfur compounds. The sampling campaign was performed in October 2009. Two types of lagoons were assessed in this study- high-solids lagoons that are loaded with sludge that was previously anaerobically digested and dewatered on the centrifuges, and low-solids lagoons that are loaded with sludge that was previously digested but not dewatered. The analysis of collected data suggested that for the high-solids lagoons the surface layer biosolids (depth of above 0.15 m) undergo long-term aerobic oxidation resulting in higher degree of final product stabilization. The subsurface layers (depth below 0.15 m) are subjected to anaerobic environment where the conditions allow only the initial rapid organic matter degradation approximately within the first year, followed xii by very slow degradation. In addition, microbiological analyses using Fluorescent in situ Hybridization did not indicate active microbial communities in aged biosolids. The performance of low-solids lagoons in the reduction of the biodegradability parameters was shown to be similar to that of the high-solids lagoons. Low-solids lagoons were shown to perform the dewatering function reducing moisture in the digested sludge from initial 2-3% TS to up to 16% TS. Although the lagoon aged biosolids were found to be stable in comparison with other products, such as composts, further aerobic processes taking place after lagoons, such as air-drying and stock-piling could induce further active biological activity. This could potentially result in the odor formation from the air-dried final product. For these reasons, more research is required on the mechanisms promoting further product degradation after lagoons aging.
PH.D in Environmental Engineering, December 2012
Show less

Title: ADVANCING DESIGN SIZING AND PERFORMANCE OPTIMIZATION METHODS FOR BUILDING INTEGRATED THERMAL AND ELECTRICAL ENERGY GENERATION SYSTEMS
Creator: Zakrzewski, Thomas
Date: 2017, 2017-07
Description: Combined electrical and thermal energy systems (i.e., cogeneration systems) will play an integral role in future energy supplies because they...
Show moreCombined electrical and thermal energy systems (i.e., cogeneration systems) will play an integral role in future energy supplies because they can yield higher overall system fuel utilization and efficiency, and thus produce fewer greenhouse gas emissions, than traditionally separate systems. However, methods for both design sizing and performance optimization for cogeneration systems and commercial buildings lag behind the tremendous advancements that have been made in building performance simulation methods. Therefore, the overall goal of this research is to develop and apply novel cogeneration system modeling techniques for optimizing design sizing and dispatch of generation sets that reduce energy use, energy costs, and greenhouse gas emissions. This research is divided into four main research objectives: (1) generalizing cogeneration performance of lean burn natural gas spark ignition reciprocating engines, (2) developing a new Design and Optimization of Combined Heat and Power (DOCHP) systems optimization tool for improving design-sizing of building-integrated and grid-tied CHP systems, (3) demonstrating the utility of the DOCHP tool with several practical applications, and (4) integrating on-site intermittent renewable energy systems into the DOCHP tool to analyze micro-grid applications. This research leverages recent developments in multiple areas of building and system simulation methods. DOCHP advances design sizing and performance optimization methods for building integrated thermal and electrical energy generation systems through the application of an evolutionary artificial intelligence-based genetic algorithm and its ability to resolve to non-linear optimization with discrete constraints while considering non-linear part-load generation set performance curves.
Ph.D. in Civil Engineering, July 2017
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Subject

Creator

Rights