Search results

Title: Cities on the Move: Envisioning Cityscape in the Autonomous Vehicle Era
Creator: Lee, Hyo Eun
Date: 2023
Description: As cities have developed in response to a rapidly changing environment since the industrial revolution, a variety of circumstances and issues...
Show moreAs cities have developed in response to a rapidly changing environment since the industrial revolution, a variety of circumstances and issues have arisen. In cities, technological development and the rise of private automobiles have been related to urban sprawl, traffic congestion, environmental degradation, and mobility inequalities. Currently, autonomous vehicles are bringing a paradigm shift in mobility as technological innovations accompany the fourth industrial revolution. As cities undergo renewal through new mobility, recent developments in driverless technologies should be considered for their long-term impact on the built environment. The purpose of this thesis is to propose a design, along with a set of scenarios, for a transportation hub in the era of autonomous vehicles to address today's complex mobility requirements. Through bringing together existing case studies, research on autonomous vehicles, and drawing conclusions regarding the relationship between mobility and urban landscapes, this thesis explores how autonomous vehicles will affect the future built environment in a set of timelines. Considering the future transportation hub will require programs and infrastructure to support autonomous vehicles, this thesis also provides a vision of the future of transportation modes and how they interact. Finally, a transportation hub design model and an automation city model for the AV era will be proposed.
Show less

Title: Simulation and Experimental Testing of High-Gradient Dielectric Disk Accelerating Cavities
Creator: Weatherly, Sarah K.
Date: 2022
Description: Structure-based wakefield acceleration can be accomplished using either Collinear Wakefield Acceleration (CWA) where the drive beam and the...
Show moreStructure-based wakefield acceleration can be accomplished using either Collinear Wakefield Acceleration (CWA) where the drive beam and the witness beam are located on the same beamline or Two Beam Acceleration (TBA) where the RF power generated by the drive beam is extracted and transferred to the witness beam line. A Dielectric Disk Accelerator (DDA) is an accelerating structure that is utilized by TBA that uses dielectric disks to improve the structure's shunt impedance and accelerate the witness beam. Dielectric based accelerators studied in this thesis are X-Band structures (have a working frequency between 8 and 12 GHz) that can use any pulse length but in this study utilize short (<20 ns) traveling wave pulses. Short pulse lengths are used to decrease breakdown probability and allow for a large gradient. DDAs have a higher group velocity and a larger shunt impedance compared to traditional metallic accelerating structures while maintaining a large accelerating gradient. DDAs are a strong candidate for use in the Argonne Wakefield Accelerator’s 500 MeV Demonstrator. Recent experimental results of a clamped single cell structure demonstrated a >100 MV/m accelerating gradient with no evidence of breakdown in the RF volume. Additional structures, including a brazed single cell model and a multicell structure, have been designed and are now being fabricated for high power testing.
Show less

Title: ESTIMATING PM2.5 INFILTRATION FACTORS FROM REAL-TIME OPTICAL PARTICLE COUNTERS DEPLOYED IN CHICAGO HOMES BEFORE AND AFTER MECHANICAL VENTILATION RETROFITS
Creator: Wang, Mingyu
Date: 2021
Description: PM2.5 are fine inhalable particles that are 2.5 micrometers or smaller in size. Indoor PM2.5 consists of outdoor PM2.5 (ambient PM2.5) that is...
Show morePM2.5 are fine inhalable particles that are 2.5 micrometers or smaller in size. Indoor PM2.5 consists of outdoor PM2.5 (ambient PM2.5) that is infiltrated into the indoor environment and indoor generated PM2.5 (non-ambient PM2.5). As people spend nearly 90% of their lifetimes indoors, with most of that time in their homes, PM2.5 exposure in homes results in severe health effects such as asthma. One strategy increasingly being used to dilute air pollutants generated indoors and improve indoor air quality (IAQ) in homes is the introduction of mechanical ventilation systems. However, mechanical ventilation systems also have the potential to introduce more ambient PM2.5 than relying on infiltration alone, although limited data exist to demonstrate the magnitude of impacts in occupied homes. The objective of this paper is to estimate the infiltration factor (Finf) of PM2.5 before and after installing mechanical ventilation systems in a subset of occupied homes. The data source utilized comes from the Breathe Easy Project, a more than 2-year-long study conducted in 40 existing homes in Chicago, IL aiming to explore the effects of three different types of mechanical ventilation system retrofits on IAQ and asthma. An automated algorithm was developed to remove indoor PM2.5 peaks in time-series data collected from optical particle counters deployed inside and outside of each home. The Finf was estimated using the resulting indoor/outdoor ratio with indoor peaks removed. Before mechanical ventilation retrofits, the weekly median Finf was 0.29 (summer median = 0.41, fall median = 0.26, winter median = 0.29, spring median = 0.30); after mechanical ventilation retrofits, the median Finf was 0.34 (winter median= 0.28, spring median = 0.45, summer median = 0.54, fall median = 0.20). Differences in Finf between pre- and post-intervention periods were not statistically significant (p = 0.23 from Wilcoxon signed rank tests). The median PM2.5 infiltration factor increased ~22% (from 0.27 to 0.33) with the installation of balanced ventilation systems with energy recovery ventilators (ERV), although differences were not statistically significant (Wilcoxon signed rank p = 0.35). The median PM2.5 infiltration factor decreased ~4% (from 0.28 to 0.27) after installing intermittent CFIS systems, which intermittently supply ventilation air through the existing central air handling units and associated filters (which were upgraded to a minimum of MERV 10 in all CFIS homes), although differences were not statistically significant (Wilcoxon signed rank p = 0.24). The median PM2.5 infiltration factor increased ~26% (from 0.35 to 0.44) with the installation of continuous exhaust-only systems, and differences were significant (Wilcoxon signed rank p = 0.04). These results suggest that the filtration mechanisms used on the CFIS and balanced systems were adequate for maintaining similar distributions of Finf values pre- and post-interventions whereas the increased delivery of outdoor air via the building envelope by exhaust-only systems significantly increased Finf following retrofits.
Show less

Title: Architecture as a Communicator of Values and Identity Spaces for Public Safety and Community Benefits
Creator: Waidele Arteaga, Nicolas
Date: 2022
Description: Urban segregation, violence, and crimes are linked to drug trafficking. El Castillo Social Factory is an urban strategy that aims to recover...
Show moreUrban segregation, violence, and crimes are linked to drug trafficking. El Castillo Social Factory is an urban strategy that aims to recover the El Castillo neighborhood and prevent drug trafficking from advancing, understanding that police action is necessary but insufficient.This neighborhood is located on the southern periphery of Santiago in a commune called La Pintana and aspires to make its neighborhoods “more livable, healthy, and economically viable.” This proposal explores how investing in civic commons can make these goals a reality. First, it is essential to increase the presence of the State, strengthening existing services and adding new ones, with a focus on the care of children and young people. The second is to recover vacant lots and public spaces in poor condition or deteriorated through an “urban acupuncture” strategy based on the construction of many small or medium-sized projects. Art and sports are fundamental, allowing us to protect children and young people and offer them horizons of recreation and hope. The public buildings, institutions, land, water bodies, and infrastructure inherited from earlier generations are ready for us to see anew—as a robust network of civic assets ready to be activated for the current needs, desires, and dreams of all the people who share and shape them. El Castillo Social Factory offers a fresh look at our community anchors and the vibrant hubs our public spaces can become when we invest in collective urban life. Its vision focuses on positive transformation at the architectural scale—where personal experience and aspirations meet broad, long-range planning efforts—to spark the imagination and spur us to work together toward realizing the abundant potential of what we hold in common.
Show less

Title: Automated Successive Baseline Schedule Model
Creator: Patel, Mihir Prakashbhai
Date: 2021
Description: The construction project involves many stakeholders and diverse phases. Usually, a construction schedule is initially set up as a simple ideal...
Show moreThe construction project involves many stakeholders and diverse phases. Usually, a construction schedule is initially set up as a simple ideal case scenario, but then, during construction, the project faces modifications such as delay, acceleration, and change in logic caused by the project’s complexity and inherent risk. To recover the damage(s) caused by these modifications, the parties responsible for them should be identified accurately. Researchers and practitioners developed and used various delay analysis models to quantify delays, but the selection of the model depends on the time of analysis, available information, and expertise of the analyst. So, the results can be biased. The general problem is that most delay analysis models consider only delays in quantifying impacts rather than every type of modification that impacted the project, including CPM logic changes and adding/removing activities during construction. This study proposes a new successive baseline model to enable the precise analysis of the impacts of all sorts of modifications that occur during construction. This model can achieve unbiased and accurate results. The analysis process can also be computerized into a web application to improve efficiency and productivity. The fundamental concepts of the various modifications that can occur in the work schedule during construction and the analysis of the modifications’ impacts are presented in this study. Issues related to concurrency, float ownership, type of modification, selection of delay analysis model, and challenges with automation are also highlighted to broaden the understanding disagreements of the parties to a construction contract. A case example is presented to prove the accuracy and usefulness of the proposed model and web application.
Show less

Title: SAFETY AND MOBILITY IMPACTS ASSESSMENT OF THE CHICAGO BIKE LANE PROGRAM
Creator: Zhao, Yu
Date: 2021
Description: In recent years, bike as a travel mode is getting increasingly popular among large cities in the U.S. These cities also found promoting bike...
Show moreIn recent years, bike as a travel mode is getting increasingly popular among large cities in the U.S. These cities also found promoting bike mode can potentially mitigate traffic congestion issues, reduce carbon emission and improve the quality of life for residents. Therefore, many cities-initiated bike-related programs promote the bike mode from all aspects, such as establishing a shared bike system and developing bike-related facilities. Specifically, bike lane installation is widely seen in large cities as a pivot component of bike promotion programs. Due to the installation of bike lanes on the existing network, vehicles’ safety and mobility performance may be affected due to the variation of facilities. This study attempts to propose a methodology to quantify the safety and mobility impacts on vehicles brought by bike lane installation. The proposed method accounts for safety impact by using predicted crashes in conjunction with field observed crash data for empirical Bayes (EB) before-after comparison group analysis. The mobility impact is captured by comparing the segment average travel time before and after the bike lane installation. Further, vehicle volume information is involved in the consumer surplus computation to quantify the variation in vehicle safety, and mobility performance resulting from the bike lane installation. A case study is conducted using a real data set from the city of Chicago bike lane program. The results reveal that the safety and mobility impacts vary mainly depending on the type of bike lane installed and location.
Show less

Title: Reconditioning Dharavi: A Toolkit of Strategies for Incremental Development
Creator: Bhogle, Saylee Deepak
Date: 2022
Description: The 2003 Global Report on Human Settlements (Un-Habitat, 2003) defines a "slum" as a densely populated metropolitan area that is distinguished...
Show moreThe 2003 Global Report on Human Settlements (Un-Habitat, 2003) defines a "slum" as a densely populated metropolitan area that is distinguished by a variety of low-income settlements, subpar housing, and squalor. Dharavi, on the other hand, is far more than a "slum." In the heart of Mumbai, Dharavi is an economically prosperous and socially active informal town. Mumbai is a thriving metropolis with many different realities and patterns, even though it appears to be a slum filled with squatters. However, the region has recently become a hub for informal settlements and urban problems associated with poor hygiene in developing countries. People’s misconceptions about Dharavi stem from a failure to recognize its social capital and economic power: the area encompasses a variety of economic networks, production types, income levels, land tenure arrangements, and religious activities and festivities. Dharavi is made up of 85 separate groups with a strong feeling of belonging and high expectations for stability and improved economic position and living standards. It is also clear that these folks are capable of building and enhancing their shelter if they have the resources to do so. To develop all these qualities, Dharavi's Social Capital must be recognized and promoted as an asset to the city of Mumbai. A community such as Dharavi requires ‘urban acupuncture’; where mediation of the littlest kind will have the greatest effect. Dharavi, like any other "Informal" city, requires rigorous examination to be fully comprehended. It is a unique location where a large flood of migrants has managed to build jobs and their city. My underlying attitude to this location is a conflicting desire to save and replace it. The desire to save is linked to the aesthetic of informality as well as the intense sociality, diversity, and production of the streets and lanes - a fascinating and diversified urban ensemble. The desire to eliminate stems from hopeless states of sterilization, ventilation, light, open space, and congested areas. As a result, a reliable strategy for combining the two methodologies and locating a functioning arrangement should be developed. The government has been trying to redevelop this area for the past 50 years but hasn’t been successful in doing so. In contrast to the existing redevelopment plan, which promotes uniform top-down development, my concept anticipates techniques for progressive self-development, including "bottom-up" finance models and architectural approaches. After identifying various patterns and carefully examining behavior patterns, production systems, and existing community facilities, a toolkit of methods can be built that can be used in various places and "outboxes." The simple homogeneity of solutions for Dharavi's changing conditions has been avoided. Dharavi's current identity and "mixed-use" paradigm have been respected, with Home recognized as an instrument of production. The proposed design has been tested for various environmental factors using different tools for natural lighting and ventilation. The outdoor areas are also analyzed for thermal comfort since a lot of social activities take place in these areas. Communal areas have been designed to accommodate micro infrastructure systems while also increasing productivity. As a result, a system of self-development triggers has been created that can improve present conditions while also supporting the community's need for stability. Simultaneously, by focusing on property ownership as an economic driver, the proposed approach can provide a type of "social mobility" for Dharavi's residents.
Show less

Title: Carrier phase multipath characterization and frequency-domain bounding
Creator: Benz, Chloe
Date: 2022
Description: Safely relying on Global Navigation Satellite Systems (GNSS) measurements for position estimation using multi-sensor navigation algorithms,...
Show moreSafely relying on Global Navigation Satellite Systems (GNSS) measurements for position estimation using multi-sensor navigation algorithms, especially in critical phases of flight – such as takeoff or landing – requires precise knowledge of the errors affecting position estimates and their extrema values at any time. This work investigates a method for characterization and power-spectral density (PSD) bounding of GNSS carrier phase multipath error intended for use in sensor fusion for aircraft navigation. In this dissertation, two methods of GNSS carrier phase multipath characterization are explored: single frequency dual antenna (DA) and single antenna dual frequency (DF). However, since not all aircraft are equipped with multiple GNSS antennas, because the DA method entails a meticulous tracking of the lever arm between the two antennas, and as multipath seen by two antennas in a short baseline configuration may cancel out, the DF method is preferred and is the main emphasis of this work. By subtracting carrier phase measurements collected by a receiver overtwo distinct frequencies, a composite measurement containing ionospheric delay and carrier phase multipath is obtained. The ionospheric delay has slower dynamics than multipath, so it is removed using a high pass filter. The filter cutoff frequency is carefully picked based on a study of ionospheric delay dynamics. The DF method is validated on a rooftop GPS carrier phase dataset, and finally, directions and considerations for its ultimate intended use on airborne collected GNSS carrier phase data are provided.
Show less

Title: ESTIMATES OF AIR EXCHANGE RATES THROUGH THE USE OF TOTAL VOLATILE ORGANIC COMPOUND DECAY MEASUREMENTS
Creator: Bradley, Christopher
Date: 2021
Description: Indoor air exchange rates are commonly used to assess the overall fitness of a building and assess its performance. More recently, air...
Show moreIndoor air exchange rates are commonly used to assess the overall fitness of a building and assess its performance. More recently, air exchange has become a concern due to the COVD-19 pandemic, requiring replacement air to ensure safety; especially so considering that humans spend much of their time indoors. Building science has focused on air exchange to quantify needs for thermal loads, balancing the overall tightness of a building with the amount of energy consumed. Moreover, guidelines have been created by several different organizations to maintain adequate ventilation to remove indoor air pollution, replacing it with clean outdoor air. Research focuses on how to maintain a comfortable and safe quality of indoor air while balancing the needs of the energy crisis.When installed with proper HVAC systems, air exchange rates can be set to a recommended value based upon the conditions of the environment. Buildings without mechanical ventilation face another issue, mainly that they only rely on natural ventilation and the infiltration rate. Temperature differences between the indoor and outdoor environment and the condition of wind speed and direction create pressure differences across the building envelope, influencing the infiltration rate, which can change the amount of air exchange in buildings with natural or mechanical ventilation. Currently, air exchange rates are commonly measured using tracer gases. More frequently used gases have included perfluorocarbon, sulfur hexafluoride, and carbon dioxide, though none of these have proven to be ideal tracers. Alongside this, cost and burden on the participants of these studies often limit the amount of measurements made. Numerous studies have been conducted on how to model the air exchange rate by the changes in concentrations, but accuracy depends on the amount of information available. Other attempts have been made to characterize buildings by their infiltration rate to make estimations, but other questions have arisen about the accuracy of these methods. Due to their ubiquity in indoor environments, volatile organic compounds have been suggested as a plausible tracer gas for measuring air exchange rates. The plausibility of this method raises questions, such as their behavior within the indoor environment, their ability to be measured and the cost to measure concentrations, and the analytical requirements to characterize the rates of removal as air exchange rates. However, due to the rapid increase of available technology in low cost, lightweight, high-resolution sensors, this novel method of using VOCs, especially indicators of total VOCs (TVOCs), may prove fruitful in measuring air exchange within specific microenvironments. Analysis of time-series TVOC concentration measurements taken from a study conducted in multiple residences was conducted to investigate the feasibility of using these measurements, and especially naturally occurring elevation and decay periods, as a proxy for calculating air exchange rates. Though the removal rates of these compounds fell within the range of typical air exchange rates for residential spaces, the results of this analysis suggest the method has potential but with limitations, including the unknown behavior of the individual compounds comprising TVOC measurements within the space, proximity and mixing effects, and potentially invalid comparisons to air exchange rates given from a LBLX model rather than simultaneous tracer gas tests. Future work should explore simultaneous use of TVOC measurements alongside conventional tracer gas testing to further explore the potential utility of such methods.
Show less

Title: INTELLIGENT STREET LIGHTING AND REMOTE POWER UNITS AS CASE STUDIES FOR CITIES TO DECARBONIZE
Creator: Burgess, Patrick G.
Date: 2022
Description: There is a scientific consensus that atmospheric warming caused by the release of emissions will reach critical levels in our lifetime if...
Show moreThere is a scientific consensus that atmospheric warming caused by the release of emissions will reach critical levels in our lifetime if significant efforts are not made to decarbonize our buildings and power grid. The City of Los Angeles is a prime example of the challenges of decarbonizing, balancing global, federal, and state policies and issues and addressing environmental justice. The first research case studies of the details and challenges of decarbonization efforts include the implementation of the first networked light-emitting diode (LED) streetlights in the city of Chicago on IIT’s campus to improve the reliability and economics of its main campus, 2.5 mi south of downtown Chicago. Research shows that these networked LED streetlights greatly reduce a city's rising energy costs, but the CSMART project team has set out to prove the benefits of integrating an intelligent communications and control system with an existing smart grid infrastructure, such as an existing network and supervisory control and data acquisition (SCADA) systems. In addition to assessing the economic and environmental drivers for the intelligent streetlight solution, the project team is dedicated to assessing the potential cybersecurity vulnerabilities of such a system and working to mitigate or eliminate them. The second research case study covers off-grid remote power units providing continuous illumination for safer streets and safer driving that is unaffected by power outages. Thanks to individual lighting control potentially allowing for dimming, blinking, and even color changing, streetlights powered by RPUs can be used as emergency signaling devices, directing traffic during a city evacuation or other emergency. The RPU control and monitoring can be accessed through the cloud, thereby avoiding reliance on local servers.
Show less

Title: Examining Associations Between Discrimination, Social Cohesion, and Health among White and POC LGBT Chicagoans
Creator: Kannout, Lynn
Date: 2022
Description: Consistent with the minority stress perspective, lesbian/gay, bisexual, and transgender (LGBT) individuals on average report worse health than...
Show moreConsistent with the minority stress perspective, lesbian/gay, bisexual, and transgender (LGBT) individuals on average report worse health than heterosexual individuals in several domains, e.g., general health, mental health, physical health, and health care access. Intersectionality-based research shows that LGBT-POC are, on average, at even greater risk for adverse health outcomes compared to their White LGBT counterparts. Discrimination and social cohesion may be two mechanisms underlying these between- and within-group disparities, given their broader relations to health and their relatively high frequency within marginalized populations. This study used data from the Chicago Department of Public Health to examine broad health differences between LGBT White and LGBT-POC individuals, and to test specific mediations models in which social cohesion mediated links between discrimination and health. LGBT-POC reported experiencing worse general health, lower access to health care, more experiences of discrimination, and lower feelings of social cohesion than did White LGBT individuals. No mediation effects emerged, however there was a direct effect of experiencing discrimination on mental health distress. Further, discrimination exposure related inversely to feelings of social cohesion. Study strengths, limitations, and implications are discussed.
Show less

Title: SYSTEMATIC ANALYSIS OF THE MCENTER BEAMLINE AT THE FERMILAB TEST BEAM FACILITY FOR THE NOVA TEST BEAM EXPERIMENT
Creator: Temizel, Buse Naz
Date: 2021
Description: This thesis presents a systematic analysis of the MCenter beamline at the Fermilab Test Beam Facility to help to generate improved beam...
Show moreThis thesis presents a systematic analysis of the MCenter beamline at the Fermilab Test Beam Facility to help to generate improved beam profiles for the NOvA Test Beam Experiment. Several studies were carried out to understand beam transport to the experiment, including optics calculations and computer simulations using a novel procedure for incorporating the acceptance of the channel. Data from beam profile monitors was used to trace the beam phase space and compared to simulation results. Detailed analysis revealed that the beam sizes on the NOvA target were large compared to its transverse size. New tunes were proposed for a detailed beam optics study. Analysis of the new tunes shows that the new optics produce two components corresponding to two different peaks at different energies in the horizontal profile at the NOvA target.
Show less

Title: Biophysical and Computational Characterization of CinDel Edits of Dystrophin
Creator: Stojkovic, Vladimir
Date: 2022
Description: Duchenne muscular dystrophy (DMD) is a degenerative genetic disease caused by a genetic defect that results in the absence of dystrophin, a...
Show moreDuchenne muscular dystrophy (DMD) is a degenerative genetic disease caused by a genetic defect that results in the absence of dystrophin, a protein with an important stabilizing role in muscle cells. DMD causes progressive muscle degeneration leading to the loss of ambulation, and typically results in death before the third decade of life. Treatments for DMD aim to restore dystrophin expression and typically do so by producing edited or modified dystrophins. The only FDA approved therapy, exon skipping, produces dystrophin edits at exon boundaries but emerging therapeutic approaches like gene replacement therapy and CRISPR-Cas9-based gene editing techniques like CinDel allow for greater flexibility and are not constrained to exon boundary edits. However, understanding of what makes a “good”, functional edit is limited so it is not clear how to make use of this increased flexibility to produce optimal edits which are believed to be necessary for robust treatment. In an effort to improve understanding of the biophysics of these non-exon edits, we have embarked on a mixed experimental and computational study of a set of CinDel edits in the D19-D21 region of the dystrophin central rod domain. First, we have conducted an Alphafold structure prediction-based screen of a subset of possible edits in this region and selected one edit for follow-up characterization. We then compared this computationally-selected edit to three other heuristically designed edits experimentally and computationally by molecular dynamics simulations. We found that the computationally selected edit is significantly more thermodynamically stable than the other edits in the cohort. This edit also generally exhibited more favorable properties in MD simulations across multiple measures such as helicity, STR-junction unwinding and conformational variability.
Show less

Title: Health Information Seeking, Depression, and Satisfaction with Life in Racial/ethnic Minority vs. White individuals with Spinal Cord Injuries
Creator: Stipp, Kelsey
Date: 2022
Description: Health information is available both traditionally by conversations with health care professionals, and non-traditionally via use of the...
Show moreHealth information is available both traditionally by conversations with health care professionals, and non-traditionally via use of the Internet and other media sources. Health information is crucial to individuals with chronic health conditions and/or disabilities, such as spinal cord injury (SCI), to promote health, minimize comorbidities, and improve quality of life (QOL). Methods of health information seeking have been shown to differ between individuals who are racial/ethnic minority individuals and individuals who are White. Existing research appears to show health information seeking may increase QOL in populations with chronic health conditions and/or disabilities. However, it is unclear how aspects of QOL differ between individuals within the SCI population by race/ethnicity. The present study used Chi Square analyses to test racial/ethnic group differences in health information seeking and multiple analysis of covariance (MANCOVA) to test whether method of health information seeking and aspects of QOL, specifically depression and satisfaction with life, were moderated by race/ethnicity. An adult sample of 9,403 individuals with SCI who completed a survey on their injury, health, and QOL between 2011 and 2016 was used. Participants identified their source of health information as traditional (i.e., conversations with health care professionals) or non-traditional (e.g., newspaper, television, radio, etc.). Results indicated non-traditional sources of health information were utilized more frequently regardless of race/ethnicity. Unexpectedly, moderation results suggested that associations between source of health information and depression and satisfaction with life did not differ by race/ethnicity. However, source of health information was associated with satisfaction with life and depression for the entire sample. Study findings demonstrate the shift towards non-traditional (e.g., newspaper, television, radio, etc.) health information seeking within the SCI population. Further, findings support previous empirical work demonstrating the association between method of health information seeking and depression and satisfaction with life. These findings can be used to improve dissemination of accurate health information to the SCI population via non-traditional sources. Further research should include more diverse samples of individuals to better understand health information seeking as well as depression and satisfaction with life within the SCI population.
Show less

Title: A Functionalized 2D Boron Nitride Electrode for Rechargeable Batteries
Creator: Tatagari, Vignyatha Reddy
Date: 2021
Description: Motivated by the great performance of the graphene oxide battery and its poor safety, in the present work, an attempt is made to fabricate an...
Show moreMotivated by the great performance of the graphene oxide battery and its poor safety, in the present work, an attempt is made to fabricate an alternative battery from functionalized 2-dimensional (2D) boron nitride. The expectation is that functionalized boron nitride can exhibit the same great electrochemical performance as graphene oxide while it would be much more thermally stable. Toward this goal, synthetic opportunities were explored to realize -OBF3 functionalized hexagonal boron nitride. Both top-down and bottom-up synthetic approaches were considered and implemented. In the top-down methods, commercially available bulk hexagonal boron nitride (h-BN) is reacted with functionalization agents such as LiOBF3 and LiOH.BF3. Synthesis of these functionalization agents and their reactions with h-BN were carried out in several different ways. Bottom-up synthetic approach using Boric Acid and Urea was utilized to synthesize turbostratic boron nitride (t-BN), which is an intermedier in the commercial synthesis of hexagonal boron nitride. Turbostratic boron nitride contains exfoliated and -OH functionalized monolayers of boron nitride. An attempt is made to esterify the -OH groups of turbostratic boron nitride to obtain the desired -OBF3 functionalized monolayers of h-BN. Initial electrochemical tests on turbostratic boron nitride and its esterified form are carried out along with ionic conductivity measurements. Only a very limited electrochemical activity was observed due to a low degree of functionalization in these materials, indicating the need for improved synthetic procedures to achieve the desired target materials.
Show less

Title: PIMMINER: A HIGH-PERFORMANCE PIM ARCHITECTURE-AWARE GRAPH MINING FRAMEWORK
Creator: Su, Jiya
Date: 2022
Description: Graph mining applications, such as subgraph pattern matching and mining, are widely used in real-world domains such as bioinformatics, social...
Show moreGraph mining applications, such as subgraph pattern matching and mining, are widely used in real-world domains such as bioinformatics, social network analysis, and computer vision. Such applications are considered as a new class of data-intensive applications that generate massive irregular computation workloads and memory accesses, which degrade the performance and scalability significantly. Leveraging emerging hardware, such as process-in-memory (PIM) technology, could potentially accelerate such applications. In this paper, we propose PIMMiner, a high-performance PIM architecture graph mining framework. We first identify that current PIM architecture cannot be fully utilized by graph mining applications. Next, we propose a set of optimizations that enhance the locality, and internal bandwidth utilization and reduce remote bank accesses and load imbalance through cohesive algorithm and architecture co-designs. We compare PIMMiner with several state-of-the-art graph mining frameworks and show that PIMMiner is able to outperform all of them significantly.
Show less

Title: DESIGN FOR COMFORT: DESIGN BUILDING ENVELOPE TO IMPROVE THERMAL COMFORT FOR RESIDENTIAL BUILDINGS IN AL-MUKALA, YEMEN
Creator: Bakarmom, Aamena Mubarak Saeed
Date: 2021
Description: This thesis is about the research into the design of building envelopes to reduce energy consumption and moderate thermal performance of the...
Show moreThis thesis is about the research into the design of building envelopes to reduce energy consumption and moderate thermal performance of the residential buildings in Yemen, which is in an arid climate. A suitable building envelope is important because of the building occupants’ thermal comfort. The most important question is how architects could implement high-performance envelope technologies in their designs, especially in residential buildings. These technologies have some basic principles which are applied differently from one region to another. One of the most promising strategies applied to house envelopes in a hot-dry climate is the passive cooling design. This thesis reviews the results of other research in the same region that discuss proper parameters of building envelopes such as form, width, climate, walls, materials, and windows design. Passive cooling strategies will be the key to providing potential design building envelopes that provide thermal comfort and reduce energy use. This study applies the natural ventilation principle (single-sided, cross- or stack ventilation), thermal mass, and shaded devices. The research methods were to collect data and create quantitative models to analyze the data. From this analysis, I suggest specific architecture guidelines for design in residential buildings which could improve comfort in indoor spaces for occupants.
Show less

Title: SEPARATING NOBLE GASES SUCH AS KRYPTON AND XENON FROM NUCLEAR POWER PLANTS OFF-GAS USING DD3R ZEOLITIC MEMBRANES: A COMPUTATIONAL MOLECULAR DYNAMICS STUDY
Creator: BASHMMAKH, BANDAR JAMAL S.
Date: 2021
Description: Noble gas fission products generated within nuclear power reactors, such as Kr and Xe, are currently discharged into the atmosphere. This...
Show moreNoble gas fission products generated within nuclear power reactors, such as Kr and Xe, are currently discharged into the atmosphere. This practice has a major economic drawback because of the high value associated with some of these gases. Zeolites, nanoporous materials suitable for gas separation processes, have become of major interest due to the potentially high selectivity for such separations. We have used nonequilibrium molecular dynamics to investigate the separation performance of DD3R framework zeolitic membranes (using LAMMPS software package) for such separations. Our studies have shown that the DD3R membrane shows promise for high selectivity ratios of Kr over Xe. The effects of pressure, temperature and pure vs. mixture gas feed conditions are studied in this work to understand at the molecular level the mechanisms of these (Kr/Xe) separations. MD runs show an agreement with most experimental trends in the permeation of Kr/Xe pure and mixed gases using DD3R zeolite with high separation factor, despite the absence of Xe complete permeation through the membrane because of MD timescale limitation, signaling much slower diffusion in comparison to Kr which is a desired trend in looking for high separation factors.
Show less

Title: INFORMAL AREAS UPGRADING STRATEGIES: THE CASE OF ADEN CITY-YEMEN
Creator: Ba Tis, Ahmed Abdullah Obaid
Date: 2022
Description: Informal areas are global problems that pose a threat to the urban environment and their consequences prompted urgently to search for...
Show moreInformal areas are global problems that pose a threat to the urban environment and their consequences prompted urgently to search for solutions and methods to address these problems and limit their effects. This thesis examines the issue of informal areas in Yemen. Informal areas are houses built on illegal public or private real estate. In Yemen, these illegal areas began as a relatively new phenomenon and since then have grown at an extremely rapid rate. Increasing rates of urbanization, poverty, and unemployment have led to the rapid rise of slums and informal housing in Yemen. The UN-Habitat database of global urban indicators estimates that 60% of Yemen's urban population lives in informal settlements. The cities most affected by the rapid growth of informal settlements include Taiz, Al Hudaydah, Sana'a, and Aden. The Yemeni government has done little to address the growth of informal areas. However, there was growing concern about this issue, and governmental and non-state actors alike began to consider new approaches to urban policy development and implementation. The importance of the thesis is that it will limit the spread of slums in Aden in the future, and it will also be a good starting point for further research and studies on the issue of developing the problem of informal areas in Yemen. There are many ways to deal with the problem of informal areas, including demolition and resettlement, and development upgrading and each method differs according to the region’s conditions, whether the urban, social economic, location of the area. This study focuses on urban upgrading to clarify its concepts, types and strategies, because it has become one of the most appropriate ways to deal with informal areas and to reach a sustainable urban environment. The thesis aims to find solutions for informal areas in Yemen and limit their growth in the future by preparing a new strategy for dealing with informal areas, in light of the experiences of other countries, and in line with the reality of Yemen.
Show less

Title: CHARACTERIZATION OF HERBS AND SPICES PHYTOCHEMICALS AND PHARMACOKINETIC PROFILE OVER 24-HOUR AFTER CONSUMPTION IN OVERWEIGHT/OBESE ADULTS
Creator: Huang, Yudai
Date: 2022
Description: The health benefits of herbs and spices (H/S) have been known since ancient times. They are a rich source of phytochemicals, such as phenolic...
Show moreThe health benefits of herbs and spices (H/S) have been known since ancient times. They are a rich source of phytochemicals, such as phenolic compounds and terpenoids. However, there is limited information on their absorption and metabolism in humans. Therefore, the primary objective of this study is to identify and characterize phytochemical compounds in H/S mixtures and their absorption and metabolism in the human body over 24 h. H/S and plasma samples used in this study were from a randomized, single-blinded, 4-arm, 24 h, multi-sampling, single-center crossover clinical trial (Clincaltrials.gov NCT03926442) conducted in obese or overweight adults (n=24, aged 37 ± 3 years, BMI=28.4 ± 0.6 kg/m2). Plasma samples were collected at baseline (t=0 h), 0.5, 1, 2, 4, 5.5, 7, and 24 h after consuming a high-fat high-carbohydrate (HFHC) meal with salt and pepper (control) or the control meal with 6 g of three different H/S mixtures (Italian herb: rosemary, basil, thyme, oregano, and parsley in the same ratio; cinnamon; and pumpkin pie spice containing cinnamon, ginger, nutmeg and allspice, the ratio unknown). The phytochemical compounds in the H/S mixtures and their metabolites in human plasma were tentatively identified and quantified by dynamic multiple reaction monitoring transitions on UHPLC-QQQ-MS/MS. Statistical analysis was conducted on SAS-PC 9.4 using non-parametric test via NPAR1WAY procedure. A total of 79 phytochemical compounds were quantified from samples of three H/S mixtures and pepper, of which 36 were flavonoids conpounds, 8 were terpenoids, 27 phenolic acids, and 9 were identified as other compounds. Acetone showed the highest extraction ability for both (poly)phenols and terpenoids in H/S compared to other organic solvents (50% and 80% methanol, ethyl acetate and chloroform). Italian herb contains 763.1 mg/100 g flavonoids, 879 mg/100 g phenolic acids, and 498.6 mg/100g terpenoids; cinnamon contains 981 mg/100 g flavonoids, 11.2 mg/100g phenolic acids, 292.3 mg/100g coumarin, and 1977.1 mg/100 g cinnamaldehyde; pumpkin pie spice contains 655.8 mg/100 g flavonoids, 17.1 mg/100 g phenolic acids, 226.5 mg/100 g coumarin, and 1633 mg/100 g cinnamaldehyde. A total of 47 metabolites were tentatively identified and quantified in plasma samples after H/S consumption over 24 h. Plasma concentrations of carnosic acid derivatives and the glucuronidation products increased after intake of Italian herb, and the Area under the curve (AUC0-24h) was significantly different from control (all P < 0.05) except carnosol glucuronide. Carnosic acid and carnosol had Tmax at 3.4±1.1 and 1.8±0.3 h, respectively, while both of their conjugated glucuronides kept increasing until 24 h. Coumarin glucuronide was increased by cinnamon and pumpkin pie spice consumption with peak concentrations reached at between 1.5-1.6 h. The AUC0-24h after both meals were significantly different from control meal, both P < 0.05. Our results suggest that H/S contain diverse categories of phytochemical compounds that are absorbed and metabolized in the human body into various metabolites in response to 3 different H/S test meals and their appearance in the blood starts as early as around 0.5 h and extends to as long as 24 h for select metabolites.
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Date

Academic status of creator

Department

Subject

Creator