Search results

Title: Delta Shelter (sequence unknown), IPRO 311 - Deliverables: 311
Creator: Schug, Timothy, Bradley, Joshua, Cahan, Noah, Dobbin, Dan, Hallenbeck, Jeff, Jordan, Davyd, Strandquist, Brad, Dohm, Jacob, Hoffman, Kent, Lee, Woong-kyo, Waisath, Nathan
Date: 2009-12
Description: The Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects...
Show moreThe Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects of the DTD house and their operations to create a more energy efficient fraternity. During the term, the team will consider possible alternatives to many issues including but not limited to: mechanical heating system, building envelope, thermal properties of buildings perimeter, roofing materials, air infiltration, ventilation, and occupancy trends.
Deliverables for IPRO 311: Delta Shelter for the fall 2009
Show less

Title: Impacts of Sulfur Capture Technology in Coal Power Plants (sequence unknown), IPRO 302 - Deliverables: IPRO 302 Poster F09
Creator: Contreras, Abraham, Dickman, Justin, Enadeghe, Gregory, Garcia Rodriguez, Hector, Haddad, Michael, Kyle, Ryan, Mongillo, Michael, Murphy, Ryan, Shonubi, Oluwaseun, Swillum, Bryce, Wolber, Brian, Worthon, Terrika
Date: 2009-12
Description: The IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United...
Show moreThe IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United States. It planned to use this knowledge to determine which sulfur capture technologies produce the greatest benefit for industry and society and to find the marketability of the sulfur byproducts created in these power plants.
Sponsorship: Sargent & Lundy, LLC
These are the deliverables for IPRO 302: Impacts of Sulfur Capture Technology in Coal Power Plants from the Fall 2009 semester.
Show less

Title: Agricultural Rehabilitation Tower: Thesis Project_RGG_JYL
Creator: Garcia, Rodrigo, Lee, Jennifer
Date: 5/4/2011, 2011-05
Description: to create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to...
Show moreto create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to create a ‘vertical façade farm’ capable of producing 156 tons of vegetables (predominantly lettuce, tomatoes, peppers, and strawberries) and 200 tons of fish per year to create a mental health sanctuary (or sanatorium) that provides short term (days), midterm (months) and long term (years) residence and care for people with mental health issues that may require physical operations and/or psychological care. to actively engage the mental health residents in aspects of the agricultural production to draw on research showing that engagement with plants/nature assists in mental healing. to create a large multi-purpose space at the ground floor of the building which will largely serve as a farmer’s market for sale of the agricultural produce and engagement between the community residents and the public to create a series of gardens/green spaces at height within the complex, as well as vertical green walls, for healing (residents and urban issues) to use the double-skin ‘façade farm’ for assisting in passive natural ventilation of internal spaces
Show less

Title: Orthotics and Prosthetics in Latin America (sequence unknown), IPRO 309 - Deliverables: IPRO 309 Midterm Presentation F09
Creator: Ashley, Trevor, Claxton, Matt, Conover, Stephen, Gotanco, Francis, Mathai, Alexander, Nizich, Adam, Park, Yong, Quikr, Kerry, Ray, Monmayuri, Vasquez, Raul
Date: 2009-12
Description: The overall goal of our IPRO team is to create a program for delivering orthotics and prosthetics that is sustainable. This will be...
Show moreThe overall goal of our IPRO team is to create a program for delivering orthotics and prosthetics that is sustainable. This will be accomplished by improving the quality of the product by increasing availability of funding, improving cost effectiveness of prosthetics, and promoting awareness of treatment available.
Deliverables for IPRO 309: Orthotics and Prosthetics in Latin America for the fall 2009 semester.
Show less

Title: Cure for the IKIA Syndrome : presented at IACRL 2008 conference
Creator: Uth, Charles, Link, Jeanne
Date: 2008-02
Description: Informal observations of a practical and creative approach piloting Blended Library Instruction for undergraduate Civil Architecture and...
Show moreInformal observations of a practical and creative approach piloting Blended Library Instruction for undergraduate Civil Architecture and Engineering students, in collaboration with faculty. At Illinois Institute of Technology students don’t receive library instruction as a required class or in tandem with a composition class. Faculty will schedule one-time sessions, which ideally should be planned with a class assignment in mind, but students are rarely engaged with a one time instruction. Many have IKIA syndrome or I Know It Already syndrome. The Millennials are a group that has integrated technology into every aspect of their lives and they assume that retrieving useful or necessary information will be easy. When they discover this isn’t the case lack of time, heightened anxiety, and increased frustration can prevent them from doing their best work. By intentionally creating a similar crisis prior to library instruction, students were more interested in what they stood to gain during pending library instruction. In this presentation we will discuss: 1) A creative means of delivering library instruction to a traditionally challenging population: engineering undergraduate students 2) Qualitative information collected via multiple assignments and interpreted in a quantitative fashion, as well as our observations. 3) A method for preparing students for library instruction that can be applied in almost any discipline without asking the instructor to sacrifice class time.
Show less

Title: Computational Aeroacoustics
Creator: Raman, Ganesh
Date: 2008
Publisher: Multi-Science Pub.

Title: Cure for the IKIA Syndrome : presented at IACRL 2008 conference: revised_assignment1for approval
Creator: Uth, Charles, Link, Jeanne
Date: 2008-02
Description: Informal observations of a practical and creative approach piloting Blended Library Instruction for undergraduate Civil Architecture and...
Show moreInformal observations of a practical and creative approach piloting Blended Library Instruction for undergraduate Civil Architecture and Engineering students, in collaboration with faculty. At Illinois Institute of Technology students don’t receive library instruction as a required class or in tandem with a composition class. Faculty will schedule one-time sessions, which ideally should be planned with a class assignment in mind, but students are rarely engaged with a one time instruction. Many have IKIA syndrome or I Know It Already syndrome. The Millennials are a group that has integrated technology into every aspect of their lives and they assume that retrieving useful or necessary information will be easy. When they discover this isn’t the case lack of time, heightened anxiety, and increased frustration can prevent them from doing their best work. By intentionally creating a similar crisis prior to library instruction, students were more interested in what they stood to gain during pending library instruction. In this presentation we will discuss: 1) A creative means of delivering library instruction to a traditionally challenging population: engineering undergraduate students 2) Qualitative information collected via multiple assignments and interpreted in a quantitative fashion, as well as our observations. 3) A method for preparing students for library instruction that can be applied in almost any discipline without asking the instructor to sacrifice class time.
Show less

Title: reVOLT: An Electric Vehicle Charging Station Prototype: Bristow_Abby_EVStation
Creator: Bristow, Abby
Date: 5/4/2011, 2011-05
Description: An electric vehicle charging station prototype. The project proposes coupling vehicle charging with other revenue generating program that...
Show moreAn electric vehicle charging station prototype. The project proposes coupling vehicle charging with other revenue generating program that grows and shrinks according to site restrictions. A small, medium, and large prototype are developed.
Show less

Title: Sloan Valve Company (sequence unknown), IPRO 306 - Deliverables
Creator: Delahanty, Sean, Jaouen, Julien, Thakkar, Hetul, Jones, Santiago Guerrero, Kim, Sung, Toor, Hammad, Jalan, Arjun, Soleja, Sikander, Zhang, Yayan
Date: 2009-12
Description: Sloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to...
Show moreSloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to pay' process and also assist in the development of a new warehouse management module.
Sponsorship: Sloan Valve Company
Deliverables for IPRO 306: Sloan Valve for the fall 2009 semester.
Show less

Title: ENABLING TOOLS FOR SINGLE CELL ANALYSIS
Creator: Li, Zhaoxia
Date: 2011-07, 2011-07
Description: Cells are basic functional units of life. A cell function is mediated by proteins and genes, whose distribution and expression level depends...
Show moreCells are basic functional units of life. A cell function is mediated by proteins and genes, whose distribution and expression level depends remarkably on the microenvironment. In the native environment, individual cells behave differently but communicate with surrounding cells. It is imperative to investigate proteins and genes at the single cell level in their native environment. The current representative single cell analysis methods, fluorescent techniques, are the most direct tools to study a single cell. The commonly used methods to measure protein and gene expression levels in single cells are on the basis of fluorescence labeling, such as fluorescence-activated cell sorting and live cell microscopy. They become more powerful when combine with the use of microfluidic devices. The disadvantages of these methods are, (1) their limited sensitivity doesn’t allow the detection of low-abundance proteins and genes; (2) they are unable to detect the cell-to-cell difference within a population; (3) the cell-sorting based method is lack of spatial resolution since the isolation of cells from the natural environment is required for analysis. To tackle these challenges, we established atomic force microscopy based approaches for in-situ gene and protein analysis on a target single live cell. The methods provide the spatial and quantitative information of cells in their native culture environment. They are effective and sensitive to detect low-abundant proteins and genes. In this thesis work, we developed a novel immunofluorescence assisted affinity mapping (IF-AM) method, in which immunofluorescence provides the guidance to locate a desired type of cell in a cell community for performing affinity mapping to quantify the local protein density at a high spatial resolution. Due to the ability of directly assessing proteins of individual cells, the IF-AM method is shown to be a sensitive tool for xiii resolving subtle differences in the local expression of membrane proteins even at low abundance. In the following work, we improved the accuracy of protein quantification by adapting the separation work based calculation rather than the previously used maximum adhesion force based calculation, and established a practical model to analyze the data systematically. We applied the methods to investigate the membrane proteins TRA-1-81 and E-cadherin on human embryonic stem cells. The heterogeneous distribution of TRA- 1-81 and the homogeneous distribution of E-cadherin as well as the quantitative measurement of the protein local abundance provided comprehensive information in understanding the strategy of hES cells to maintain the stemness during cell proliferation and to initiate the differentiation. An mRNA retrieval method was also developed to perform the gene expression analysis on a single cell of a desired type in a cell community. This was achieved by using a functionalized AFM tip as a bait to bind and retrieve mRNA from a desired single cell, followed by sensitive Quantitative Polymerase Chain Reaction (Q-PCR) analysis. The extraction of mRNA from live cells was performed with non/negligible damage to the cells. The established method here enabled the gene expression analysis of individual live cells at the original sites without disrupting the cell context. Thus the gene expression of a target cell and its surrounding cells can be analyzed in parallel, deriving concrete data for understanding the behavior of one cell in concert with that of the surrounding cells in the same or different cell population. The method was successfully applied in the study of side population cells in ovarian cancer cells. The methods developed in this thesis are versatile, and can be broadly applied to the study of different membrane proteins and genes of various cell types.
Ph.D. in Chemistry, July 2011
Show less

Title: FORCED PERIODIC CONTROL OF AN EXOTHERMIC CSTR WITH MULTIPLE INPUT OSCILLATIONS
Creator: Rigopoulos, K., Shu, X. S., Cinar, A.
Date: 1988-12
Publisher: AMER INST CHEMICAL ENGINEERS
Description: Interaction among various oscillating inputs may result in significant modifications in the behavior of a system under forced periodic control...
Show moreInteraction among various oscillating inputs may result in significant modifications in the behavior of a system under forced periodic control. Forced oscillations in the input flow rate and input concentrations of an exothermic continuous stirred tank reactor enable the stabilized operation of the CSTR in the unstable steady state region. Reactor temperature oscillations under forced periodic control are similar to the oscillations resulting from proportional-integral feedback or nonlinear (push-pull) feedback control, and under some operating conditions the oscillation amplitude is significantly lower. Theoretical and experimental studies illustrate the effects of forcing frequency and phase shift on reactor behavior.
Endnote format citation
Show less

Title: PEGYLATION OF FIBRONECTIN AND ITS FUNCTIONAL DOMAINS: EFFECT ON STABILITY AND BIOLOGICAL ACTIVITY
Creator: Zhang, Chen
Date: 2013, 2013-07
Description: Delayed wound healing in many chronic wounds has been linked to the lack of extracellular matrix (ECM) support and the degradation of...
Show moreDelayed wound healing in many chronic wounds has been linked to the lack of extracellular matrix (ECM) support and the degradation of fibronectin (FN) by an abnormally high protease level. The ECM is important in wound healing because it provides physical and chemical cues that direct tissue growth and development. FN is a key ECM protein that attracts and binds different molecules and cells and thereby supports biological responses associated with wound healing. The goal of my study is two fold: (1) To create an ECM analogue based on a composite of polyethylene glycol (PEG) hydrogels and FN binding domains and (2) To stabilize FN against proteolytic degradation by conjugating it to PEG. To address the first goal, I used Michael addition chemistry to covalently link the cell-binding domain of FN, III9−10, to PEG diacrylate and cross-linked the conjugate to PEG hydrogels. The conjugation of PEG to III9−10 was through cysteines in the affinity tag Glutathione S Transferase (GST). The conjugate of GST-III9−10 and PEG was characterized by: (i) Circular dichroism studies to determine secondary structure, (ii) Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) to determine molecular weight, and (iii) Ellmans reagent to determine the efficiency of PEG conjugation to GST-III9−10. The conjugate of PEG and GST-III9−10 had comparable secondary structure to GST-III9−10. SDS-PAGE studies showed that up to three PEG molecules were attached to one GST-III9−10 molecule. The efficiency of PEG conjugation was greater than 90% and occurred within 30 minutes after PEG diacrylate addition. Adhesion assays were used as a metric of biological activity. These assays demonstrated that on a molar basis cell adhesion and spreading were significantly higher on PEG hydrogels with GST-III9−10 than those with the commonly used arginine-glycine-aspartic acid (RGD) peptide. Scaffold rigidity is an important biological cues that influence xi cell responses. However, a comparative study of rigidity on GST-III9−10 and RGD functionalized PEG hydrogels demonstrated that differences in rigidity could not account for differences in cell adhesion and spreading between RGD and GST-III9−10 functionalized PEG hydrogels. Thus as ECM analogues, GST-III9−10 functionalized hydrogels provide more robust biochemical cues than RGD functionalized hydrogels. Studies of PEG hydrogel composites with mixtures of III9−10 and a fibronectin binding domain demonstrated that biological responses of adhesion and spreading and extracellular matrix assembly could be controlled by varying the ratio of these two domains and the rigidity of the PEG hydrogels. FN was stabilized against proteolytic degradation by covalent attaching it to PEG or by PEGylating it. FN was first isolated from human plasma by gelatin affinity chromatography and then PEGylated using two methods. The first method is to PEGylate human plasma fibronectin (HPFN) at cysteine residues with 3.4 kDa PEG diacrylate. The second method is to PEGylate HPFN at lysine residues on the surface with 2-10 kDa PEG Succinimidyl carboxy methyl esters. Cysteine PEGylation of HPFN was first carried out because cysteines are concentrated in the amino- terminus of HPFN which leaves two-thirds of the molecule, including the cell-binding domain, unperturbed. PEGylation of HPFN on cysteines resulted in a molecule that supported cell adhesion, spreading, focal adhesion formation and cell migration in a comparable manner to native HPFN. Moreover, PEGylated HPFN was incorporated into the ECM in a similar manner to native HPFN when present in the culture media but not when coated on a surface indicating that PEGylation on cysteines modified some biological activity of HPFN. Additionally, HPFN PEGylated by this manner could not bind denatured collagen or gelatin. The gelatin-binding domain is at the site of cysteine PEGylation. The second approach for PEGylation of HPFN was through lysine residues xii on the surface of the protein. This approach was used because it targeted different amino acid residues in FN. The length of PEG and extent of PEGylation have been reported to influence biological activity of proteins. In the second approach, both PEG length and extent were varied. HPFN completely PEGylated on lysines residues was significantly more proteolytically stable than native HPFN but had reduced cell attachment and spreading. Furthermore, cell spreading and attachment on surfaces conjugated with this lysine PEGylated HPFN decreased with increasing PEG length. Partially PEGylated HPFN was synthesized by masking the cell and gelatin binding domains during PEGylation. The partially PEGylated HPFN supported cell adhesion and spreading in a similar manner to native HPFN and was more proteolytically stable. For the partially PEGylated HPFN, the size of PEG poly had no significant influence on the attachment and spreading of cells. These studies are the first attempt by any laboratory to stabilize FN against proteolytic degradation while retaining activity and show the feasibility of this approach as a potential therapeutic approach. The work presented here shows a two-prong approach by which the problem of ECM degradation and deficiency chronic wound healing can be addressed. The first approach for addressing ECM deficiency is through a scaffold design methodology. The novelty of the scaffold approach is that it uses the cell-binding domains of FN instead of the often-used RGD peptide. I demonstrate that a PEG hydrogel with the cell-binding domain produces a more robust biological response in cells than a PEG hydrogel with the RGD peptide. I also demonstrate that varying different functional domains of fibronectin can be used to controllably stimulate multiple biological responses. The second approach demonstrates a method by which FN, a key ECM protein, is stabilized against proteolytic degradation without perturbing its activity. These studies of creating PEG-FN conjugates are the first of their kind. Collectively, the data that I present in this thesis will lead to novel therapeutic methods for treating chronic wounds.
PH.D in Chemical Engineering, December 2012
Show less

Title: Kaon Freeze-out Dynamics in √sNN=200 GeV Au+Au Collisions at RHIC, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
Creator: Šumbera, Michal
Date: 2013-09-15, 2013-09-15
Publisher: IIT Press
Description: Measurements of three-dimensional correlation functions of like-sign low transverse momentum kaon pairs from Au+Au collisions at top RHIC...
Show moreMeasurements of three-dimensional correlation functions of like-sign low transverse momentum kaon pairs from Au+Au collisions at top RHIC energy √sNN =200 GeV are presented. The extracted kaon source function is narrower than the pion one and does not have the long tail along the pair transverse momentum direction. This indicates a much smaller role of long-lived resonance decays and/or of the emission duration on kaon emission. Three-dimensional Gaussian shape of the kaon source function can be adequately reproduced by Therminator simulations with resonance contributions taken into account. Comparison to pion data at the same energy reveals that the kaon Gaussian radii in the outward and sideward directions scale with the transverse mass mT. In the longitudinal direction, unlike at lower SPS energies, the Gaussian radii do not seem to follow the exact mT scaling between kaons and pions.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less

Title: A STEP TOWARD SUPPORTING LONG-RUNNING APPLICATIONS WITH REAL-TIME CONSTRAINTS ON HYBRID CLOUDS
Creator: Wu, Hao
Date: 2017, 2017-05
Description: The advancement of computer and network technology has brought the world into a new computer cloud era. The ”pay-as-you-go” business model and...
Show moreThe advancement of computer and network technology has brought the world into a new computer cloud era. The ”pay-as-you-go” business model and the service oriented models allow users to have ”unlimited” resources if needed and free from infrastructure maintenance and software upgrades. Cloud services are currently among the top-ranked high growth areas in computing and are seeing an acceleration in enterprise adoption with the worldwide market predicted to reach more than $270b in 2020. According to Google, currently more than 95% of the web services are deployed on cloud.Many di↵erent types of applications are deployed on computer clouds. However, due to inherent performance uncertainty within computer clouds, as of today, applications with real-time and high QoS constraints still operate on traditional computer systems and are not able to benefit from elastic computer clouds.. The thesis focuses on both theoretical analysis and real system implementation on the problem of guaranteeing real-time application’s deadline requirement while minimizing the application’s execution cost on hybrid clouds. Four major problems have been addressed towards moving applications with real-time constraint on hybrid computer clouds. 1). A minimal slack time and minimal distance (MSMD) scheduling algorithm is developed to minimize the resources needed to guarantee an application’s end-to-end deadline requirement using computer clouds. 2). A VM Instance Hour Minimization (IHM) algorithm is developed to reduce the application’s execution cost for given schedules. The proposed IHM algorithm can be integrated with common scheduling algorithm used in the literature. In addition, we also evaluated the feasibility of utilizing spot instance to further reduce the application’s execution cost while not sacrificing QoS guarantees. 3). A reference model for virtual machine launching overhead is developed to predict both system utilization and timing overhead during the VM launching process. 4). A hybrid cloud management tool that integrates the developed algorithms and reference model is developed to support running long-running applications with real-time constraints on hybrid clouds.
Ph.D. in Computer Science, May 2017
Show less

Title: PERFORMANCE ANALYSIS AND OPTIMIZATION OF LARGE-SCALE SCIENTIFIC APPLICATIONS
Creator: Wu, Jingjin
Date: 2013, 2013-07
Description: Scientific applications are critical for solving complex problems in many areas of research, and often require a large amount of computing...
Show moreScientific applications are critical for solving complex problems in many areas of research, and often require a large amount of computing resources in terms of both runtime and memory. Massively parallel supercomputers with ever increasing computing power are being built to satisfy the need of large-scale scientific applications. With the advent of petascale era, there is an enlarged gap between the computing power of supercomputers and the parallel scalability of many applications. To take full advantage of the massive parallelism of supercomputers, it is indispensable to improve the scalability of large-scale scientific applications through performance analysis and optimization. This thesis work is motivated by cell-based AMR (Adaptive Mesh Refinement) cosmology simulations, in particular, the Adaptive Refinement Tree (ART) application. Performance analysis is performed to identify its scaling bottleneck, a performance emulator is designed for efficient evaluation of different load balancing schemes, and topology mapping strategies are explored for performance improvements. More importantly, the exploration of topology mapping mechanisms leads to a generic methodology for network and multicore aware topology mapping, and a set of efficient mapping algorithms for popular topologies. These have been implemented in a topology mapping library – TOPOMap, which can be used to support MPI topology functions.
PH.D in Computer Science, July 2013
Show less

Title: Children's Center for Learning and Joy - Final Presentation
Creator: Rao, Sijun
Date: 5/13/2011, 2011-05
Description: This project provide children with the learning chance they can not get in regular schools. The environment help them develop multiple...
Show moreThis project provide children with the learning chance they can not get in regular schools. The environment help them develop multiple intelligences.
Show less

Title: High Performance Green Homes (sequence unknown), IPRO 317 - Deliverables
Creator: Bhat, Adnan, Campbell, Brittanie, Cink, Jefferey, Gutstein, Yehuda, Hadi, Shuaib, Hafdi, Kamal, Hasan, Hasan, Kenig, Elezar, Lipski, Brian, Lollino, Luca, Margolis, Jordan, Nigamatzyanov, Tagir, Patel, Hiren, Patel, Neal, Shehada, Hazem, Toops, Melissa, Trauner, Crystal, Zgourdah, Mourad
Date: 2009-12
Description: The purpose of this project is to show how a team committed to helping people help save the world can leapfrog today's best designs. As...
Show moreThe purpose of this project is to show how a team committed to helping people help save the world can leapfrog today's best designs. As opposed to the tradition of minimum design standards that just meeting the building code, highest practical design standards are the focus. True sustainability is the goal of this project, including; Zero Carbon Emissions, Net Zero Energy, 100% Solar Power, 10 times the traditional design life, 1/10th the maintenance, rot proof, termite proof, fire proof, hurricane and earthquake resistant. The project team, using cutting edge technology, will develop all aspects of a start-up design and build company to promote High Performance Green Homes. This project will provide a great opportunity for IIT students to experience a challenging and interesting project and to significantly contribute to a better world.
Sponsorship: Jimmy Eng
Show less

Title: Orthotics and Prosthetics in Latin America (sequence unknown), IPRO 309 - Deliverables: IPRO 309 Poster F09
Creator: Ashley, Trevor, Claxton, Matt, Conover, Stephen, Gotanco, Francis, Mathai, Alexander, Nizich, Adam, Park, Yong, Quikr, Kerry, Ray, Monmayuri, Vasquez, Raul
Date: 2009-12
Description: The overall goal of our IPRO team is to create a program for delivering orthotics and prosthetics that is sustainable. This will be...
Show moreThe overall goal of our IPRO team is to create a program for delivering orthotics and prosthetics that is sustainable. This will be accomplished by improving the quality of the product by increasing availability of funding, improving cost effectiveness of prosthetics, and promoting awareness of treatment available.
Deliverables for IPRO 309: Orthotics and Prosthetics in Latin America for the fall 2009 semester.
Show less

Title: Gerry-meandering: An Assessment of the Congressional District Model of Depository Allocation (preprint): AhrensGriffinfinalpreprint
Creator: Ahrens, Aric G., Griffin, Luke A.
Date: 2003-06
Description: The preprint of a published article dealing with the effect of allocating Federal Depositories by Congressional district. Conclusions drawn...
Show moreThe preprint of a published article dealing with the effect of allocating Federal Depositories by Congressional district. Conclusions drawn include the fact that due to redistricting that occurs after each decennial census, over time some districts may have within their boundaries a greater number than the two depositories that Congressional district allocation was intended to produce. Likewise, over time shifting boundaries of districts have created districts that have no depositories whatsoever.
Show less

Title: Measurement of the strong coupling αS from the 3-jet rate in e⁺ e⁻ annihilation using JADE data, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
Creator: Kluth, S.
Date: 2013-09-15, 2013-09-15
Publisher: IIT Press
Description: We describe a measurement of the strong coupling αS(MZ₀ ) from the 3-jet rate in hadronic final states of e⁺ e⁻ annihilation recorded with the...
Show moreWe describe a measurement of the strong coupling αS(MZ₀ ) from the 3-jet rate in hadronic final states of e⁺ e⁻ annihilation recorded with the JADE detector at centre-of-mass energies of 14 to 44 GeV. The jets are reconstructed with the Durham jet clustering algorithm. The JADE 3-jet rate data are compared with QCD predictions in NNLO combined with resummed calculations. We find good agreement between the data and the prediction and extract αS(MZ₀ ) = 0.1199±0.0010(stat.)±0.0021(exp.)±0.0054(had.)±0.0007(theo.) .
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of