Search results

Title: POWER ELECTRONIC INTERFACE FOR AN OFF-GRID SOLAR POWERED ENERGY STORAGE SYSTEM
Creator: Mao, Yanwen
Date: 2012-10-17, 2012-12
Description: There are about 1.5 billion people in the world with no access to electricity. Of these, a significant number of people live in rural parts of...
Show moreThere are about 1.5 billion people in the world with no access to electricity. Of these, a significant number of people live in rural parts of Africa and Asia. It is very inconvenient and unhealthy for them to work or study at night with the poor light from a candle or kerosene lamp. Additionally, since they do not have a continuous or predictable supply of power, it can be significantly difficult for them to use modern electronic devices such as cell phones, computers or sometimes even basic amenities such as lights and fans. For such situations, an energy storage system powered by solar energy can be a good solution, while being environmentally friendly and easy to use. In this thesis, the design and analysis of an off-grid solar powered energy storage system is presented. It consists of a solar panel, battery pack, control circuit, bidirectional DC/DC converter, and inverter. Operation of this system can be described in terms of two modes. In the daytime, the solar panel absorbs energy from sun light; the DC/DC converter boosts the voltage to a certain value and charges the battery pack. During the nighttime, the battery pack provides energy to the circuit; the DC/DC converter boosts voltage level and the inverter inverts DC voltage to single phase AC voltage; this output of 110V AC voltage can charge cell phones, run an energy save lamp, a fan, or even power a laptop. Details of the design process, system operation, components used in the system, simulation and experimental results are explained in the thesis. The main contribution of the thesis is the development of a new off-grid solar powered energy storage system control strategy that can store solar energy in the battery and provide regular 110V AC xii voltage output to the load when needed; additionally, the implementation of the concept along with testing on an experimental set-up is discussed.
M.S. in Electrical Engineering, December 2012
Show less

Title: A NUMERICAL-METHOD FOR DETERMINING OPTIMAL PARAMETER VALUES IN FORCED PERIODIC OPERATION
Creator: Ozgulsen, F., Adomaitis, R. A., Cinar, A.
Date: 1992-02
Publisher: PERGAMON-ELSEVIER SCIENCE LTD
Description: A numerical approach for determining values of forcing parameters which maximize performance of a periodically forced system is described....
Show moreA numerical approach for determining values of forcing parameters which maximize performance of a periodically forced system is described. Periodic solutions of the system equations plus a differential form of the time-average performance measure are computed with a shooting algorithm. A nonlinear programming package is used to solve the optimization problem. The algorithm is applied to ethylene oxidation process, using the model of a continuous stirred-tank reactor (CSTR).
Endnote format citation
Show less

Title: Developing a Collaborative On-line Student Research Forum (sequence unknown), IPRO 321 - Deliverables: IPRO 321 Midterm Presentation F09
Creator: Abhay, Anandha, Cornelius, Zachary, Corsus, Tom, De Courten-myers, Maximilian, Eberlin, Adam, Kapaldo, James, Nicholson, Bethany, Sizyuk, Yuriy, Sundberg, Stephen
Date: 2009-12
Description: ResearchWeb is meant to broaden IIT undergraduate participation beyond the existing mechanisms such as fellowships, research and reading...
Show moreResearchWeb is meant to broaden IIT undergraduate participation beyond the existing mechanisms such as fellowships, research and reading courses, and departmental projects. There is also the possibility of broadening this program to other scholarly individuals outside of the IIT undergraduate community. These individuals include IIT graduate students, students from other universities, and promising high school students. ResearchWeb is also meant to improve the transition, and perhaps promote if need be, the transition from undergraduate education to graduate education. This would be fulfilled through practical research experience.
Deliverables for IPRO 321:Developing a Collaborative On-line Student Research Forum for Fall 2009
Show less

Title: B-SPLINE BASED ROBUST FORMULATION IN TOPOLOGY OPTIMIZATION
Creator: Gu, Yu
Date: 2014, 2014-12
Description: In this thesis, we extend the B-spline based density representation to robust topology optimization. The B-spline based representation has...
Show moreIn this thesis, we extend the B-spline based density representation to robust topology optimization. The B-spline based representation has been shown to have the ability of preventing checker-boards. With separate analysis and design mesh, the B-spline based filter is also competitive on computation storage compared with usual density filter. However, the current B-spline based representation is not robust where gray transitions exist. The recent proposed robust formulation highlights the manufacturability that simulates under- or over- etching designs compared with intermediate design. The robustness is demonstrated through three test cases. The minimum length control for quadratic B-splines is analytically derived with respect to knot span size and threshold. Our study about the characteristics of rectangular domain of B-spline based representation, shows that the optimized designs are comparable to those by density filter.
M.S. in Mechanical and Aerospace Engineering, December 2014
Show less

Title: Transmission efficiencies of belting
Creator: Marks, Robert Edward
Date: 2009, 1919
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/transmissioneffi00mark
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaf 29

Title: ENVIRONMENTAL PERFORMANCE VS. FINANCIAL PERFORMANCE, MARKET INEFFICIENCY AND INVESTMENTS
Creator: He, Chaohua
Date: 2014, 2014-07
Description: It is challenging to de ne corporate environmental performance or corporate nancial performance. In this study, a company is considered to...
Show moreIt is challenging to de ne corporate environmental performance or corporate nancial performance. In this study, a company is considered to have good environmental performance (namely, be green, environment-friendly or environmentally responsible) if it is among the Top 100 of the 500 US greenest companies ranked by Newsweek, or has environmental strength(s) and no environmental concern in terms of the KLD ratings. A company is regarded to have good nancial performance if it has a high raw return, Sharpe ratio, and excess (or abnormal) return over various benchmarks. Preference will be given to excess return estimated using the Carhart four-factor model [14]. A previous published longitudinal study, co-authored with my advisor [13], unveils that: 1) environmentally responsible companies tend to experience signi cantly positive abnormal performance in the long horizon (e.g. from the fourth to seventh year after being selected); 2) the value-adding e ect and the market's upward price adjustments on undervalued intangible environmental strength(s) might have resulted in the long-term outperformance. Would environmentally responsible companies still outperform during shorter horizons, such as the event period of an environmental disclosure? Using event study methodologies, this paper investigates market responses to independent Newsweek environmental disclosures by analyzing cross-sectional and time-series abnormal security returns. Results suggest that the Top 100 greenest companies tend to display signi cant abnormal returns within 4 days after a disclosure, and the signi cant abnormal returns generally persist for no more than 3 trade days. e.g., the Carhart four-factor abnormal return, with statistical signi cance, is averaged at 0.50% per day over the four disclosure events. The ndings are robust to di erentmodels of normal return, removal of outliers, elimination of confounding e ects, controlling for characteristic factors, and adjusting for cross-sectional correlation and volatility shift on test statistics using BMP-adjusted technology[56]. Signi cant abnormal returns over the event period may indicate ine ciency of the nancial market. Fama-Macbeth regressions further reveal that short-horizon abnormal returns could be explained by a spectrum of characteristic variables, green investing, arbitrage trading, and/or various psychological biases. Complementing the cited longitudinal study, a portfolio-level comparison reveals that an actively managed green portfolio outperforms an actively managed nongreen portfolio in terms of raw return and risk-adjusted measures such as Sharpe ratio, Jensen's alpha and Fama-French alpha in the long horizon. The results are robust to di erent portfolio weighting technologies and the consideration of turnover costs. In addition, the green portfolio's outperformance is driven by a bunch of small, aggressive and relatively inactive stocks that have better performance than the market predicts. No evidence shows that the ever-increasing demand on green securities leads to the green portfolio's outperformance, because green stocks are actually less actively traded. Panel regressions further indicate that long-horizon corporate economic performance positively correlates to historical corporate environmental performance.
Ph.D. in Management Science, July 2014
Show less

Title: SUSTAINABLE, CONTROLLED, REACTION SYNTHESIS OF METALLIC WIRES AND STRIPS
Creator: Chen, Xin
Date: 2014, 2014-05
Description: The main purpose of this work is to investigate bi and tri-metallic metal com- binations as initiators which require an ability to have a self...
Show moreThe main purpose of this work is to investigate bi and tri-metallic metal com- binations as initiators which require an ability to have a self-sustaining exothermic reaction. Through the reaction, the initiator should achieve a temperature in excess of 500 C when in contact with a thermally conducting surface. Also the initiator must be in the form of a exible wire or strip of the order of one millimeter radius. There are four phases in my MS research project. First was identifying the potential candidate compounds for exothermic reaction. During this phase, I wrote a program using Mathematicar (Appendix A) to calculate the adiabatic temperature resulting from the reaction of di erent binary or ternary elemental combinations. The calculation took into account the speci c heats and any enthalpies of transformation occurring between room temperature and the adiabatic temperature. Based on the results of this program several suitable compositions were selected from three hun- dred candidates. The second phase was determining a methodology to manufacture selfCpropagating thin strips or wires. We attempted several methods including plate rolling, wire twisting, mechanical coating, chemical coating, and powder metallurgy. We successfully obtained self-propagating thin metal strips and wires using powder metallurgy methods. In the third phase, a transparent reaction box was constructed in order to provide a protective atmosphere (Ar gas) and connect to a data acqui- sition system to obtain the reaction temperature, initiation temperature and video materials of reactions. In the last phase, the reacted samples were characterized using Scanning Electron Microscope (SEM), Backscattered Electron detector (BSE), X-ray Di raction (XRD), Di erential scanning calorimeter (DSC), etc.
M.S. in Mechanical, Materials, and Aerospace Engineering, May 2014
Show less

Title: A MODEL OBJECT BASED SUPERVISORY EXPERT SYSTEM FOR FAULT TOLERANT CHEMICAL REACTOR CONTROL
Creator: Basila, M. R., Stefanek, G., Cinar, A.
Date: 1990-05
Publisher: PERGAMON-ELSEVIER SCIENCE LTD
Description: An expert system for real-time control of chemical processes provides an environment for coordination of process fault diagnosis, assessment...
Show moreAn expert system for real-time control of chemical processes provides an environment for coordination of process fault diagnosis, assessment of process behavior, automated controller retuning and/or reconfiguration and consequently enables fault-tolerant process control. A supervisory expert system with object-based knowledge representation and heuristic (shallow) and model-based (deep) knowledge is presented. The expert system resides on a PC/386 and communicates with the control system developed in the form of control blocks residing on a PC/286. The prototype of the expert system is developed for retuning model-based controllers to improve the behavior of a packed-bed tubular CO oxidation reactor under autothermal operation. MOBECS is a supervisory expert system designed to tailor the process control system for a tubular autothermal reactor in response to process or control system faults, and changes in the process behavior. Specific functions include process fault diagnosis, control system performance monitoring and trouble-shooting, controller tuning and control system restructuring. As this work progresses, we will also address the problems of sensor placement, state estimation and process identification. Because of the high degree of coupling and interaction between process and control system entities, objects are the best knowledge representation for a process control expert system. The class—object structures of MOBECS is divided into three orthogonal trees representing the process and control system hierarchies and the topology of the system. Using this structure, knowledge is divided into general knowledge applicable to any process or control system and knowledge that is domain specific. The general knowledge is stored in the class structures and, together with generalized rules, forms a knowledge base kernel. This permits rapid prototyping of other applications of MOBECS. Properties are defined as high as possible in the class tree structure and inherited downwards. Knowledge specific to the process is stored in the objects at the leaves of the trees. Rules form the reasoning portion of the knowledge base and contain the causal relationships, meta-knowledge and performance monitoring functions. Rules that perform general monitoring and troubleshooting are applied at the class level through pattern matching. Rule sets are linked through context relationships to identify indirect relationships to the inference engine. These relationships are used with the process topology tree to reduce the search space when a fault is detected. The process monitoring and instability detection rules have been tested by simulating the inputs to the expert system. At the present time, experimental validation of the MOBECS prototype is being undertaken. Once the MOBECS prototype has been fully tested, the knowledge base will be extended to incorporate more complex fault diagnosis, state estimation, sensor placement and controller restructuring.
Endnote format citation
Show less

Title: Agricultural Rehabilitation Tower
Creator: Garcia, Rodrigo, Lee, Jennifer
Date: 5/4/2011, 2011-05
Description: to create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to...
Show moreto create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to create a ‘vertical façade farm’ capable of producing 156 tons of vegetables (predominantly lettuce, tomatoes, peppers, and strawberries) and 200 tons of fish per year to create a mental health sanctuary (or sanatorium) that provides short term (days), midterm (months) and long term (years) residence and care for people with mental health issues that may require physical operations and/or psychological care. to actively engage the mental health residents in aspects of the agricultural production to draw on research showing that engagement with plants/nature assists in mental healing. to create a large multi-purpose space at the ground floor of the building which will largely serve as a farmer’s market for sale of the agricultural produce and engagement between the community residents and the public to create a series of gardens/green spaces at height within the complex, as well as vertical green walls, for healing (residents and urban issues) to use the double-skin ‘façade farm’ for assisting in passive natural ventilation of internal spaces
Show less

Title: A Video Annotation and Indexing System (sequence unknown), IPRO 327 - Deliverables
Creator: Dhagam, Karthik, Donchev, Alexander, Homawoo, Sergio, Litas, Alexander, Orlichenko, Anton, Osswald, Christian, Petsod, Jason, Rawlings, Ori, Shaffer, Joshua, Smith, Antoinette, Yates, Andrew, Yu, Hee Jeoung
Date: 2009-12
Description: Much information available on the Web is in video format. The problem with this medium is users cannot comment on particular scenes within the...
Show moreMuch information available on the Web is in video format. The problem with this medium is users cannot comment on particular scenes within the videos and there is no method of searching for specific content within the videos. The team proposes to develop a system that will allow users to make fine-grained comments on scenes within the video and then to use these comments to aid in search within videos.
Deliverables for IPRO 327: A video annotation and indexing system for the fall 2009 semester
Show less

Title: Greenweb
Creator: Thomas, Boerman
Date: 2010-07-29

Title: CONSTITUTIVE BEHAVIOR AND MODELING OF AL-CU ALLOY SYSTEMS
Creator: Turkkan, Omer Anil
Date: 2013-05-07, 2013-05
Description: High speed deformation events such as caused by projectile penetration, fragment impact and shock/blast loading are of great importance in...
Show moreHigh speed deformation events such as caused by projectile penetration, fragment impact and shock/blast loading are of great importance in designing materials and structures for army applications. In these events, materials are subjected to large strains, high strain rates and rapid increase in temperature due to thermoplastic heating. In such severe conditions, overall performance is determined by the evolution of flow stress, failure initiation and propagation, and commonly in the form of adiabatic shear banding. Some of 2XXX series aluminum-copper (Al-Cu) alloys are recognized for their decent ballistic properties, and therefore they have been used as an armor material for lightweight U.S. Army vehicles. Most recently, an Al-Cu-Mg-Mn-Ag alloy labeled as Al 2139-T8 has been developed and is evaluated by the U.S. Army Research Labs. because of its better ballistic properties and higher strength than its predecessors. The underlying microstructure is believed to be the key element for this superior performance. The goal of this study is to explore the effect of composition and microstructural features on overall dynamic material behavior by examining mechanical and deformation behavior of different Al-Cu material systems. Starting from the pure single crystal and polycrystalline Al structures, and adding a different element to chemical composition in each step (i.e., Cu, Mg, Mn, Ag), mechanical response of these different systems has been investigated. For all alloy systems with the exception of single crystal Al, mechanical tests have been performed at room and elevated temperatures covering quasi-static ( to ) and dynamic ( to strain rate regimes. xiv Shear-compression specimens promoting localized shear deformation have been used to explore tendency of each one of these materials to failure by adiabatic shear banding. In addition to phenomenological Johnson-Cook Model (JCM), physics based Zerrilli-Armstrong and Mechanical Threshold Models have been studied to model the constitutive response of Al-Cu alloys over a wide range of strain rates and temperatures.. An improved ZA model has been developed to better capture the trends in experimental data.
M.S. in MECHANICAL, MATERIALS, AND AEROSPACE ENGINEERING, May 2013
Show less

Title: VIBRATIONAL CONTROL OF AN EXOTHERMIC REACTION IN A CSTR - THEORY AND EXPERIMENTS
Creator: Cinar, A., Deng, J., Meerkov, S. M., Shu, X. S.
Date: 1987-03
Publisher: AMER INST CHEMICAL ENGINEERS
Description: Vibrational control is a method for modification of dynamic properties of linear and nonlinear systems by introducing fast, zero-average...
Show moreVibrational control is a method for modification of dynamic properties of linear and nonlinear systems by introducing fast, zero-average oscillations in the system's parameters. In this paper, forced oscillations introduced in the input flow rates of an exothermic continuous stirred-tank reactor (CSTR) are shown to result in a modification of the S-shaped steady state curve. This modification leads to a possibility of operating a CSTR at an asymptotically stable period regime located in the vicinity of an unstable steady state of the reactor system with stationary input flow rates. Thus, vibrations of the input flow rates can be viewed as a stabilizing mechanism for exothermic CSTR's.
Endnote format citation
Show less

Title: QUALITY-OF-SERVICE AWARE SCHEDULING AND DEFECT TOLERANCE IN REAL-TIME EMBEDDED SYSTEMS
Creator: Li, Zheng
Date: 2015, 2015-05
Description: For real-time embedded systems, such as control systems used in medical, automotive and avionics industry, tasks deployed on such systems...
Show moreFor real-time embedded systems, such as control systems used in medical, automotive and avionics industry, tasks deployed on such systems often have stringent real-time, reliability and energy consumption constraints. How to schedule real-time tasks under various QoS constraints is a challenging issue that has drawn attention from the research community for decades. In this thesis, we study task execution strategies that not only minimize system energy consumption but also guarantee task deadlines and reliability satisfaction. We first consider the scenario when all tasks are of the same criticality. For this case, two task execution strategies, i.e. checkpointing based and task re-execution based strategies are developed. Second, considering the scenario when tasks are of different criticalities, a heuristic search based energy minimization strategy is also proposed. When tasks are of different criticalities, a commonly used approach to guaranteeing high-criticality task deadlines is to remove low-criticality tasks whenever the system is overloaded. With such an approach, the QoS provided to low-criticality tasks is rather poor, it can cause low-criticality tasks to have high deadline miss rate and less accumulated execution time. To overcome this shortcoming, we develop a time reservation based scheduling algorithm and a two-step optimization algorithm to meet high-criticality task deadlines, while minimizing low-criticality task deadline miss rate and maximizing their accumulated execution time, respectively. As many-core techniques mature, many real-time embedded systems are built upon many-core platforms. However, many-core platforms have high wear-out failure rate. Hence, the last issue to be addressed in the thesis is how to replace defective cores on many-core platforms so that deployed applications’ real-time properties can be maintained. We develop an offline and an online application-aware system reconfiguration strategy to minimize the impact of the physical layer changes on deployed real-time applications. All the developed approaches are evaluated through extensive simulations. The results indicate that the developed approaches are more effective in addressing the identified problems compared to the existing ones in the literature.
Ph.D. in Computer Science, May 2015
Show less

Title: Wagner single phase induction motor
Creator: Ash, H. J., Croskey, Philip
Date: 2009, 1905
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/wagnersinglephas00ashh
Thesis (B.S.)--Armour Institute of Technology

Title: UNDERSTANDING REACTION MECHANISMS AND CONTROLLING REACTIVE SURFACE SPECIES DURING ATOMIC LAYER DEPOSITION OF METAL CHALCOGENIDES
Creator: Weimer, Matthew S.
Date: 2016, 2016-07
Description: Atomic layer deposition (ALD) is a thin film growth technique that relies on self-limiting reactions between vapor precursors and a surface....
Show moreAtomic layer deposition (ALD) is a thin film growth technique that relies on self-limiting reactions between vapor precursors and a surface. Significant progress has been made in the scope of materials grown by ALD, enabled by precursor development and investigation of surface reaction mechanisms; progress is still necessary. This dissertation has two portions. The first is the development of organometallic compounds to engender new material growth by ALD. Second is the development of X-ray absorption spectroscopy (XAS) tools and techniques for observations of the metal coordination environment during ALD. One material that can be difficult to make is doped materials. Composition of a doped material determines the film properties. One example is vanadium doped indium sulfide. This material was purposed as an intermediate bandgap solar absorbing material which can absorb multiple ranges of light. Two new precursors were developed for the growth of indium sulfide and vanadium sulfide. The indium sulfide material grown has shown superior film photocurrent qualities and doping of vanadium into indium sulfide with fine control over atomic placement was achieved. Films were grown that showed secondary absorptions which aligned with theoretical calculations. The flexibility of the V(III) precursor is shown by a short study on the control of the difficult vanadium-oxygen system in the deposition of stoichiometric oxides. To illustrate how XAS can be used in conjunction with other techniques tin dioxide growth from a stannylene precursor and hydrogen peroxide was studied. From ex situ XAS measurements nucleation, growth and termination reaction mechanism were discovered. Next, a mobile ALD reactor allowed for in situ XAS measurements to be performed on “flat” substrates for the first time. Specifically, the local coordination environment and surface reactions were followed while erbium was doped into alumina and coordination environment of manganese was investigated in the growth of manganese-doped zinc oxide, with the ability to probe in-plane versus out-of-plane bonds. These unique in situ XAS experiments allow for greater understand of metal and non-metal precursors as they interact with surfaces. This enhanced understanding enables new precursor development which leads to better control over surface chemistry and new materials.
Ph.D. in Chemistry, July 2016
Show less

Title: Biophilic Calumet
Creator: Meder, Robert
Date: 2010-07-29

Title: SITE-DIRECTED MUTAGENESIS STUDY OF VITREOSCILLA HEMOGLOBIN-THE ROLE OF TYROSINE (B10) AND PROLINE (E8) IN THE STRUCTURE OF THE LIGAND-BINDING SITE
Creator: Zhang, Yifan
Date: 2015, 2015-05
Description: Vitreoscilla is a genus of Gram-negative aerobic bacterium which has the capability to synthesis a soluble, homodimertic hemoglobin,...
Show moreVitreoscilla is a genus of Gram-negative aerobic bacterium which has the capability to synthesis a soluble, homodimertic hemoglobin, Vitreoscilla hemoglobin (VHb). The Vitreoscilla hemoglobin was the first bacterial hemoglobin discovered, and has a wide range of biological and biotechnological applications. The distal site is one of the hot spots in VHb studies because of its unique structure. The Tyrosine residue at B10 and its hydrogen bonded Proline at E8 were considered as the ligand binding functional sites in distal space of VHb according to the previous study. In this study, two single mutated and one double mutated Vitreoscilla hemoglobin at position B10 and E8 were constructed and purified. In the two single mutants, the Tyr at B10 and the Pro at E8 were mutated to Ala. In the double mutant, both of the sites were mutated to Ala. The CO di↵erence spectrum data of the mutants indicate that the ligand binding ability of the Vitreoscilla hemoglobin was not neutralized by the mutations at ProE8 and TyrB10. Circular dichroism spectrum data of the mutants is similar to the wild type Vitreoscilla hemoglobin, which means the globin secondary structure is conserved. However the micro-environment in the distal sites is changed: the IR spectrum of the carbonyl stretch bond red-shifted in the CO bound VHb double mutant. A molecular dynamic simulation was introduced in the study to o↵er some guidance for future research plans. The simulation results showed that the B10 and E8 residue mutated to Ala might reduce the flexibility of the D-region, because of the more completed C and E helix. The volume of cavity where the heme group inserts changes significantly in various mutant models, which may provide a rough explanation of the change in carbonyl stretch bond IR spectrum. Additionally, an interesting conformation of Gln E7 was found in the simulation of double mutant model.
M.S. in Biology, May 2015
Show less

Title: DISTRIBUTED VIDEO CODING FOR RESOURCE CONSTRAINED VIDEO APPLICATIONS
Creator: Liu, Wenhui
Date: 2014, 2014-05
Description: Video coding technology has played a key role in the explosion of current multimedia society with increasing resolution and quality. Such big...
Show moreVideo coding technology has played a key role in the explosion of current multimedia society with increasing resolution and quality. Such big success is largely built on the conventional video coding paradigm where motion estimation and compensation are performed at the encoder. This asymmetry in complexity is well-suited for the applications where the video sequence is encoded once and decoded many times. However, some new emerging applications such as wireless video surveillance, wireless PC cameras and multimedia sensor networks require a low complexity encoding, while possibly a ording a high complexity decoding. Therefore, a challenging problem emerges with the new type of visual communication system is how to achieve low complexity encoding video compression while maintaining good coding e ciency. Distributed video coding (DVC) provides low complexity encoding solutions for video communication with limited computational power or energy constraints. In DVC, the source video information is independently encoded at lightweight encoders. At the decoder, all the received bitstreams are jointly exploited their statistical dependencies between them. In such a way, motion estimation and its computational complexity is shifted from the encoder to the decoder. However, DVC also has its own restrictions. The low coding e ciency remains a challenging issue for DVC compare to the conventional video coding. Although DVC is robust to channel loss due to its intrinsic feature of independent encoders and joint decoder, the error resiliency for medium to large transmission errors is weak. In this dissertation, previously proposed low-complexity DVC (LC-DVC) architecture is rstly introduced. After that, a continued work is presented to further improve quality of SI. The proposed method is called spatio-temporal joint bilateral upsampling (STJBU) based SI generation, where geometric closeness of pixels and their photometric similarity is exploited to reduce the noise while preserving the edge xiv information. Moreover, a distributed multiple description coding (DMDC) scheme is proposed by combining the multiple description (MD) coding into LC-DVC to improve its error resiliency. All the proposed schemes are well described and the ratedistortion analyses are presented in this dissertation. All these features have made the LC-DVC a great solution for resource constraints applications.
PH.D in Electrical Engineering, May 2014
Show less

Title: MIN- AREA RETIMING UNDER WIRE-DELAY MODEL
Creator: Luo, Tianchen
Date: 2011-05-09, 2011-05
Description: Retiming is a powerful optimization technique for synchronize sequential circuits that relocates delay unit without changing the circuit’s...
Show moreRetiming is a powerful optimization technique for synchronize sequential circuits that relocates delay unit without changing the circuit’s input-output functionality. Wire delay is significant and can no longer be ignored in deep sub-micrometer technologies. Existing algorithms solve the problem of min-area and min-period either optimal or heuristically without taking wire delay into consideration. However, those techniques cannot be applied directly to circuit with wire delay. Recent work solved the min-period problem under wire delay model. This paper proposes an algorithm that solves the problem of min-area wire retiming under fixed clock period optimally and efficiently.
M.S. in Electrical and Computer Engineering, May 2011
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of