Search results

Title: Nonlinear Interactions as Precursors to Mode Jumps in Resonant Acoustics
Creator: Panickar, P., Srinivasan, K., Raman, G.
Date: 2005-09
Publisher: American Inst Physics
Description: This paper examines instability mode switching in various supersonic jet configurations that involve resonant acoustics. Resonant acoustics...
Show moreThis paper examines instability mode switching in various supersonic jet configurations that involve resonant acoustics. Resonant acoustics includes situations where flow instabilities are enhanced by feedback. The pressure spectra in such situations are rich in multiple modes, and mode switching can occur rather unpredictably. Our experiments reveal that mode switching and the number of nonlinear interactions are interconnected and this number increases just prior to a mode switch. We quantified nonlinear interactions by counting the number of such interactions occurring over a threshold level in the nonlinear cross-bicoherence spectrum and confirmed that nonlinear interactions are precursors to mode jumps. Further, this result was found to be independent of the threshold level. Moreover, if more than one instability mode coexisted, the decay of one and the persistence of the other caused a similar increase in nonlinearities. On the other hand, if there was no mode switch, the nonlinearities remained at comparable limits over the entire operating range. The latter part of the work focused on why difference interactions significantly outnumbered sum interactions in the spectra of shock-containing resonant flows. Using linear stability calculations it is shown that most of the difference interactions that occurred had a positive spatial growth rate and were, hence, unstable. In contrast, a majority of the sum interactions lay outside the amplified region which indicated that they tend to decay spatially. (c) 2005 American Institute of Physics.
http://dx.doi.org/10.1063/1.2008995
Show less

Title: Mycoflora of Indoor Dust and Alternaria Alternata Growth on Building Materials
Creator: Simpson, Stacy
Date: 2011-10-27, 2011-12
Description: Alternaria alternata, a clinically significant mold species is associated with allergic disease and asthma. An indoor growth of A. alternata...
Show moreAlternaria alternata, a clinically significant mold species is associated with allergic disease and asthma. An indoor growth of A. alternata may initiate atopic symptoms, accumulate in dusts, and discolor and deteriorate indoor building materials. Environmental control should be the initial approach to maintain a healthy indoor environment and manage allergic diseases. The current thesis investigated indoor dusts from various environments for mold spores and Alt a 1. Laboratory studies were carried out to determine if or which commercially available mold-resistant treatments and building materials could efficiently decrease A. alternata growth and Alt a 1. The mycoflora of indoor dusts was microscopically examined and the clinically significant allergen from A. alternata, Alt a 1 was measured in sampled dusts using a monoclonal anti-recombinant Alt a 1 (rAlt a 1) enzyme linked immuno-sorbent assay (ELISA). To investigate building material susceptibility untreated, mildew-resistant painted, and commercially available biocide treated building materials were inoculated with A. alternata spores, incubated in a humidity controlled chamber, and compared for mold growth and the presence of Alt a 1. A photo-monitoring technique was used to survey and determine mold growth surface area coverage. Alt a 1 immuno-reactivity of superficial mold growths was analyzed with the ELISA. The microscopic speciation of mold spores indicated that a diverse mycoflora can be found in indoor dusts. Although A. alternata was found in low concentrations in a few samples, Alt a 1was below the limit of detection. Nevertheless, mold spores can significantly contribute to the complexity of indoor dusts. A. alternata grew on all tested building materials but both painted and treated building materials inhibited mold growth in comparison to untreated samples. Not all material surfaces contained detectable levels of Alt a 1. Comparisons between untreated and painted building material groups indicated that a significant difference between the Alt a 1 accumulation content could not be established. To establish a standard sampling protocol and reliable prevention methods for mold contamination and exposure more knowledge about indoor molds must be gained.
M.S. in Environmental Engineering, December 2011
Show less

Title: Mixer-ejector Wall Pressure and Temperature Measurements Based on Photoluminescence
Creator: Taghavi, R.r., Raman, G., Bencic, Tj
Date: 2002-04
Publisher: American Inst Aeronaut Astronaut
Description: Ejector side-wall pressure distribution is a key indicator of supersonic jet-mixer-ejector performance. When documenting pressure patterns on...
Show moreEjector side-wall pressure distribution is a key indicator of supersonic jet-mixer-ejector performance. When documenting pressure patterns on an ejector wall using pressure-sensitive paint (PSP), one has to consider temperature variations caused by the supersonic jet flow within the ejector because these can cause significant local errors in the PSP results. If the temperature sensitivity of PSP is not corrected for in complex internal supersonic flows, large localized errors could contaminate the results. In the present work, temperature-sensitive paint maps the temperature distribution on the ejector wall and corrects PSP results point-by-point for temperature sensitivity. The experiments were conducted on multijet supersonic mixer-ejector configurations with straight, convergent (6-deg), and divergent (6-deg) side walls. A comparison of corrected and uncorrected PSP readings shows that at M-j = 1.55, the error with respect to true data from static pressure ports can be reduced from 4.98 to 2.84% for the case of a simple ejector with parallel walls. For the complex 6-deg convergent ejector at M-j = 1.39, the error reduces by almost an order of magnitude (from 20.83 to 2.66%). Our results indicate that the use of this correction technique can significantly reduce PSP errors in complex internal supersonic flow situations.
Show less

Title: MECHANICAL PROPERTIES AND SINTERING MECHANISMS OF POWDER METALLURGY TI6AL4V
Creator: Xu, Xiaoyan
Date: 2013, 2013-05
Description: Titanium has been identified as one of the key materials with a high strength to weight ratio that can reduce the weight of components and...
Show moreTitanium has been identified as one of the key materials with a high strength to weight ratio that can reduce the weight of components and thereby reduce energy consumption. Single press and sinter as a powder metallurgy technique has the potential to provide cost effective components. Armstrong prealloyed Ti6Al4V, HDH prealloyed Ti6Al4V, HDH blended Ti6Al4V powder and their mixtures were pressed and sintered at different conditions. The chemistry, mechanical and microstructural properties have been investigated to establish optimum processing parameters. Sintered parts were sent to Oshkosh Truck to test and compared with aluminum and steel parts. The Titanium and Ti6Al4V parts were successfully applied and tested. All the specimens passed the load test without failures. The sintering mechanisms of Armstrong prealloyed Ti6Al4V powder were investigated. At relative sintered densities of 75% to 90% (around 900°C), surface diffusion cooperate with grain boundary diffusion, which leads to densification of the powder compact. Around 900°C, grain boundary diffusion controls the sintering process. At 1000°C, boundary diffusion made little contribution to the densification of the Ti6Al4V powder compact. Above 900°C and below 91% sintered density, boundary diffusion controls sintering. Lattice diffusion dominates the densification process at higher temperatures (1100°C~1300°C). The sintering of master alloy blended Ti6Al4V powder has been investigated in order to elucidate the mechanism of sintering. Both blended powder compacts and diffusion couples were investigated using backscattered imaging and energy xvi dispersive analysis to determine the phases present and diffusion path on sintering at 1000ºC and 1100ºC. It is shown that transient liquid phase sintering does not occur and the reason for the rapid sintering of this material is due to enhanced diffusion kinetics resulting from a combination of the concentration gradient and stress induced by a phase transformation in the ternary system.
PH.D in Materials Science and Engineering, May 2013
Show less

Title: WEB-BASED CONTEMPORANEOUS DELAY ANALYSIS
Creator: Pektas, Murat
Date: 2011-11-22, 2011-12
Description: The construction industry is fragmented due to the many stakeholders and the diverse phases involved in a construction project. On time,...
Show moreThe construction industry is fragmented due to the many stakeholders and the diverse phases involved in a construction project. On time, within budget, with required quality are essentials of a successful project. However, most construction projects are faced with delays, which obstruct success. To recover the damage caused by delays, both the delays and the parties responsible for them should be identified accurately. Daily window delay analysis outperforms other delay analysis methods, but it requires intensive day-by-day information. The information flow among the project stakeholders must be smooth and speedy at all stages of the production process not only to achieve the basic project objectives but also to let project stakeholders recognize the delays and the parties responsible for them in order to recover time and cost. The Internet is attractive for transferring information promptly and economically with no regional or temporal borders. To merge the power of the Internet and to ease time consuming delay analysis, a web-based application is proposed to analyze delays effectively and contemporaneously, to reduce time and cost, and to provide historical data. The application considers the day-by-day variation in critical path(s) during the project life cycle. The application gives accurate and repeatable results for apportioning project delays, accelerations and decelerations among involved parties. The manual effort required by traditional systems is minimized with the application’s simple, easy to use, yet effective and highly automated features. Moreover, the database structure of the application is designed to store and manage more than one project at a time to let its users calculate the overall performance of the company including all projects, and to calculate average durations for activities that can come up in future projects.
M.S. in Civil Engineering, December 2011
Show less

Title: Empirical modeling of systems with output multiplicities by multivariate additive NARX models
Creator: Decicco, J., Cinar, A.
Date: 2000-06
Publisher: AMER CHEMICAL SOC
Description: Multivariable additive NARX (nonlinear autoregressive with exogenous inputs) modeling of process systems is presented. The model structure is...
Show moreMultivariable additive NARX (nonlinear autoregressive with exogenous inputs) modeling of process systems is presented. The model structure is similar to that of a generalized additive model (GAM) and is estimated with a nonlinear canonical variate analysis (CVA) algorithm called CANALS. The system is modeled by partitioning the data into two groups of variables. The first is a collection of future outputs, and the second is a collection of past input and outputs and future inputs. This approach is similar to linear subspace state-space modeling. An illustrative example of modeling is presented on the basis of a simulated continuous chemical reactor that exhibits multiple steady states in the outputs for a fixed level of the input.
Endnote format citation for DOI:10.1021/ie9906464
Show less

Title: A METHODOLOGY FOR MAJOR BUS ROUTE RESCHEDULING TO IMPROVE TRANSIT PERFORMANCE
Creator: Lu, Xi
Date: 2012-08-01, 2012-07
Description: In a period of growing transit operating deficits, increasing attention and concern is being directed at both the decreasing levels of...
Show moreIn a period of growing transit operating deficits, increasing attention and concern is being directed at both the decreasing levels of productivity of transit systems in general and the broad differences in measured service performance compiled for various transit systems. The purpose of this study is an assist public transit managers by providing them with a mathematical technique to analyze the efficiency with which serviced is produced and the effectiveness with which it is consumed. By providing the analysis model which not requires an extensive amount of data, the operator can have tool for decision-making of profit and market growth. Thus, transit managers will be able to access the performance of the agency and areas where improvements can be realistically achieved. Using the urban operation of the Chicago Transit Authority, a transit performance model is developed to analysis efficiency and effectiveness of the city's bus system. As the system exists, there are 144 bus routes start and end, frequency of dispatching buses and ridership changes from Weekdays and Weekend, peak hour and off-peak hour. In many of these routes, vehicles are used inefficiently and ineffectively, only a few passengers carried in some routes in off-peak hour, yet in other routes through the Central Business District (CBD) area, there are always not enough buses in peak hour. Also, some routes cannot provide enough on-time arrival service and some special group like elderly and handicapped cannot receive enough service in certain area. The goal of case research is to determine to understand the transit performance of Chicago Transit Authority and to select the optimal improvement projects to maximize the performance in term of economy and social equity.
M.S. in Civil Engineering, July 2012
Show less

Title: SUSTAINABLE NEW CITY MENTOUGOU, CHINA
Creator: Yin, Lu
Date: 2013-04-30, 2013-05
Description: This thesis will demonstrate one of the first urban models for the future of China’s growth. The Urban Operating System and GPS make the smart...
Show moreThis thesis will demonstrate one of the first urban models for the future of China’s growth. The Urban Operating System and GPS make the smart city smarter by linking up networks of billions of distributed sensors, systems, and intelligence across urban environments via city-scale operating systems. Personal Rapid Transit system runs everywhere and it is accessed and ordered by smart phone. Green belt is the medium that links all the natural area and parks in the city which become the core element in the city because it plays the most important role. Two types of transportation system including the Meglev for 10 minute access to Beijing and the PRT system for all internal urban mobility. The population of the new city is 80000. 80% of the people live here and work here, 20% of the people live here but work in Beijing. 30% of the people will use PRT system everyday. All the city blocks are mixed-use blocks. There are several types of residential buildings including mid-rise, high-rise and Beijing traditional courtyard house. This sustainable new city provides quality of lift to all the people live in the city.
M.S. in Architecture, May 2013
Show less

Title: DAMAGE DETECTION OF STRUCTURES USING INTERVAL FINITE ELEMENT METHOD
Creator: Venkitaraman, Shyamala
Date: 2012-04-16, 2012-05
Description: Health assessment and damage detection for existing structures is an essential procedure for their safe and reliable operation so that any...
Show moreHealth assessment and damage detection for existing structures is an essential procedure for their safe and reliable operation so that any catastrophic failure may be prevented in a timely manner. However, results obtained from a health assessment of a structure possess uncertainties in measurements, system properties and loads. Furthermore, the conventional deterministic structural analyses are incapable of considering these uncertainties, thereby resulting in error when estimating the state of health of a structure. Interval (unknown-but-bounded) representation is one method to quantify uncertainty in a physical system. Using an interval variable, the uncertain parameter is bounded between extreme values. In this work, a new method for damage assessment of structures is developed that utilizes the results from structural health assessment as uncertain input parameters in an interval finite element analysis scheme. This method, due to its capability of considering uncertainties, offers a more robust process for estimating the possible existence of damage and overall health of the structure. As an illustrative example, the method is applied for a failed sign support structure. First, the structure's response from previous health assessment procedure was used to construct uncertain interval responses. Then using these interval responses as input parameters, an interval finite element method was performed. The results of the analysis verify and correlate with the failure location of the actual structure. Moreover, the lifetime assessment of the structure obtained from this method is the lower bound of, and correlates with the actual failure time of the structure.
M.S. in Civil Engineering, May 2012
Show less

Title: Laboratory Notebook 112
Creator: Zhang, Zhe, Varelis, Peter
Date: 2010-03-09T22:34:24Z
Description: This laboratory notebook relates to the "Heat Stability of Ricin in Phosphate Buffer System" project with Peter Varelis as the Principle...
Show moreThis laboratory notebook relates to the "Heat Stability of Ricin in Phosphate Buffer System" project with Peter Varelis as the Principle Investigator.
Show less

Title: PARADIGM SHIFT IN REMOTE EDUCATION FOR THE LABORATORY: A SOCIAL APPROACH TO DISTANCE LEARNING
Creator: Hanley, Richard
Date: 2011-12, 2011-12
Description: With modern telecommunication tools the ability for two individuals to work together remotely has greatly improved. Moreover, there have been...
Show moreWith modern telecommunication tools the ability for two individuals to work together remotely has greatly improved. Moreover, there have been great strides made to improve handling medium to large groups of people in real time in remote settings, viz. the teleconference and webinar. However, the status of remote tools for laboratory environments where there is significant hardware and the individuals are more likely to talk amongst themselves in irregular patterns is not nearly as well studied. This thesis examines the way most laboratories in electrical engineering are setup, and creates a model for how to create a remote environment for distance learning. It then discusses the current state of the art, and how such an implementation of the model can be made with such tools. Finally a usability study of the implementation is examined. The primary result of the usability study is that when moving to a remote environment the social paradigm that students and instructors use is likely to change, and simply working on creating a virtual mirror to the laboratory may not work in the future.
M.S. in Electrical Engineering, December 2011
Show less

Title: Development of High Bandwidth Powered Resonance Tube Actuators with Feedback Control
Creator: Raman, G., Khanafseh, S., Cain, A. B., Kerschen, E.
Date: 2004-01-22
Publisher: Academic Press Ltd Elsevier Science Ltd
Description: A high bandwidth powered resonance tube (PRT) actuator potentially useful for noise and flow control applications was developed. High...
Show moreA high bandwidth powered resonance tube (PRT) actuator potentially useful for noise and flow control applications was developed. High bandwidth allows use of the same actuator at various locations on an aircraft and over a range of flight speeds. The actuator selected for bandwidth enhancement was the PRT actuator, which is an adaptation of the Hartmann whistle. The device is capable of producing high-frequency and high-amplitude pressure and velocity perturbations for active flow control applications. Our detailed experiments aimed at understanding the PRT phenomenon are complemented by an improved analytical model and direct numerical simulations. We provide a detailed characterization of the unsteady pressures in the nearfield of the actuator using phase averaged pressure measurements. The measurements revealed that propagating fluctuations at 9 kHz were biased towards the upstream direction (relative to the supply jet). A complementary computational study validated by our experiments was useful in simulating the details in the region between the supply jet and the resonance tube where it was difficult to gather experimental data. High bandwidth was obtained by varying the depth of the resonance tube that determines the frequency produced by the device. Our actuator could produce frequencies ranging from 1600 to 15,000 Hz at amplitudes as high as 160 dB near the source. The frequency variation with depth is predicted well by the quarter wavelength formula for deep tubes but the formula becomes increasingly inaccurate as the tube depth is decreased. An improved analytical model was developed, in which the compliance and mass of the fluid in the integration slot is incorporated into the prediction of resonance frequencies of the system. Finally a feedback controller that varied both the resonance tube depth and spacing to converge on a desired frequency was developed and demonstrated. We are optimistic that numerous potential applications exist for such high bandwidth high dynamic range actuators. (C) 2003 Published by Elsevier Science Ltd.
http://dx.doi.org/10.1016/S0022-460X(03)00212-8
Show less

Title: EUTECTIC γ(NI)/γ′(NI3AL)-δ(NI3NB) POLYCRYSTALLINE NICKEL-BASE SUPERALLOYS: CHEMISTRY, PROCESSING, MICROSTRUCTURE AND PROPERTIES
Creator: Xie, Mengtao
Date: 2012-12-03, 2012-12
Description: Directionally solidified γ(Ni)/γ′(Ni3Al)-δ(Ni3Nb) eutectic alloys possess attrac- tive high temperature mechanical properties and were...
Show moreDirectionally solidified γ(Ni)/γ′(Ni3Al)-δ(Ni3Nb) eutectic alloys possess attrac- tive high temperature mechanical properties and were considered as candidate tur- bine blade materials. Currently, the properties of polycrystalline γ/γ′-δ alloys are of interest as they inherit many advantageous attributes from the directionally solidi- fied γ/γ′-δ alloys, including high volume fraction of reinforcing phases, exceptional thermal stability and resistance to segregation-induced defect formation. If these at- tributes are properly harnessed, these γ/γ′-δ eutectic alloys might provide a unique solution to the problems experienced by traditional γ/γ′ polycrystalline Ni-base su- peralloys. This thesis is therefore dedicated towards the development of a funda- mental understanding of this novel class of eutectic alloys from several important perspectives. To enrich our understanding of this alloy system, this thesis will first be focused on quantifying the specific effect of individual alloying element on this γ/γ′-δ eutectic system. A set of quaternary Ni-Cr-Al-Nb alloy compositions with increasing levels of Chromium(Cr) was designed to investigate the detailed influence of this element on the primary phase formation, solidus and liquidus temperatures and γ-δ eutectic morphology. The alloying effect of Tantalum(Ta), which shares many similarities to Niobium(Nb), was studied by designing a matrix of multi-component γ/γ′-δ alloy compositions with nominally the same overall (Ta+Nb) content but varying Ta/Nb ratios. Here, different solidification segregation and solid state partitioning behaviors of Ta and Nb in this γ/γ′-δ eutectic system will be discussed, as well as the influ- ence of Ta/Nb ratio on solidification characteristics and equilibrium/non-equilibrium phase volume fractions. Thermodynamic calculations using the Computherm Pandat database (PanNi7) were compared to experimental results in these investigations. The second part of this thesis will aim to provide a more general understand- xvii ing of the effect of various alloying elements, including Cr, Co, Al, Ti, Mo, W, Ta and Nb, on this γ/γ′-δ system. A large number of experimental γ/γ′-δ alloys covering a broad range of compositions was selected for the analysis in this study. Important alloy attributes, such as primary phase formation, overall δ volume fraction, phase transformation temperatures and ternary eutectic initiation, were quantitatively char- acterized as a function of individual alloying element concentrations or combined con- tent of more elements. Linear regression analysis was performed to reveal the relative effectiveness of these elements on this eutectic system. Meanwhile, an extensive com- parison between the experimental observations and Pandat predictions was provided to critically evaluate the strength and weakness of existing thermodynamic database model in predicting trends in this eutectic alloy system with substantially higher Nb content compared to traditional γ/γ′ superalloys. The last part of this thesis emphasizes the development of cast and wrought manufacturing processes for cast γ/γ′-δ eutectic alloys as a cost effective alternative to the powder metallurgy route. Hot rolling of workpieces encapsulated within a steel can was performed on a simple model cast γ/γ′-δ alloy (897) to stimulate the ingot to billet. The influence of different deformation levels on breaking down the dendritic structure and promoting fine and homogenized microstructure was investi- gated. The mechanical soundness associated with different microstructures generated by different hot rolling processes was compared via compression and creep testing. Microstructural parameters that contribute to better mechanical properties will be discussed.
PH.D in Materials Science and Engineering, December 2012
Show less

Title: SURVIVAL AND GROWTH OF LISTERIA MONOCYTOGENES IN CHOPPED GREEN AND RED BELL PEPPERS USING PREDICTIVE MODELING
Creator: Zhang, L1jie
Date: 2015, 2015-07
Description: Listeria monocytogenes (L. monocytogenes) is a Gram-positive pathogenic organism and the causative agent of human and animal listeriosis....
Show moreListeria monocytogenes (L. monocytogenes) is a Gram-positive pathogenic organism and the causative agent of human and animal listeriosis. Listeriosis is a gastrointestinal or invasive systemic illness resulting from consumption of contaminated food products, mainly cheese, deli meats, and fresh produce, by L. monocytogenes. In recent years, several foodborne outbreaks have been reported that were associated with fresh produce, such as cantaloupe, celery and sprouts. Temperature is considered a major factor that affects L. monocytogenes growth during storage. The proliferation of L. monocytogenes varies on different produce items based on storage temperature. In this study, the persistence and population dynamics of three L. monocytogenes strains, LS806 (cheese isolate), LS810 (cantaloupe isolate) and LS808 (celery isolate) were evaluated by incubating inoculated fresh-cut green bell pepper and red bell pepper at various temperatures (5oC, 10oC, and 25oC) for 14 days. To assess the risk of L. monocytogenes in these fresh-cut vegetable items, a primary predictive model was fitted for L. monocytogenes growth data using DMFit. Green bell pepper had significantly (P<0.05) higher pH and aw, and higher amounts of yeast and mold and Enterobacteriaceae than did red bell pepper. In green bell pepper, all three strains showed no significant difference (P>0.05) in growth rate when incubated at the same temperature. In red bell peppers, LS808 had the highest (P<0.05) growth rate at both 5°C and 25°C out of the three strains. All of the three strains grew significantly faster (P<0.01) at 25°C than either 5°C or 10°C in both green and red bell peppers. All three strains obtained less than 1 log10 growth increase after incubating at 25°C for 6 hours on pre-chilled produce. Some strains (LS806 and LS810) significantly increased (P<0.01) during two 5-hour 25°C incubations, but did not reach 1 log10 growth increase. The results indicate that L. monocytogenes not only persists, but also grows in chopped green and red bell peppers at 5, 10, and 25°C, and strains grew faster at the higher temperature (25°C). Data obtained could be further evaluated for determining whether Time/temperature control for safety (TCS) designation should be applied to chopped green and red bell peppers.
M.S. in Food Safety and Technology, July 2015
Show less

Title: Influence of the target on multiparticle production in the forward domain in p+Pb collisions at 158 GeV, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
Creator: Rybczyński, Maciej
Date: 2013-09-15, 2013-09-15
Publisher: IIT Press
Description: In this talk we show the influence of the target on multiparticle production in the forward hemisphere in p+Pb collisions at top SPS energy....
Show moreIn this talk we show the influence of the target on multiparticle production in the forward hemisphere in p+Pb collisions at top SPS energy. The multiplicity distributions appear to be almost target independent in the projectile fragmentation domain and the effect of fluctuations of the number of target participants is not seen in the projectile fragmentation region. We compare the obtained results with those for p+p interactions and predictions of models.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less

Title: STRUCTURAL CHARACTERIZATION OF THE FLIGHT MUSCLE OF MANDUCA SEXTA
Creator: Cheng, Yu-shu
Date: 2013-04-22, 2013-05
Description: There are several properties of the flight muscle Manduca sexta that are interesting. In its physiological characteristics, like mammalian...
Show moreThere are several properties of the flight muscle Manduca sexta that are interesting. In its physiological characteristics, like mammalian skeletal and cardiac striated muscle, it is a synchronous muscle. However, it is much more similar structurally to the more widely known asynchronous insect flight muscles of Drosophila and Lethocerus. The goal of the thesis is to study the structural characteristics and perform mechanical studies of dorsal and ventral muscle of Manduca flight muscle. In pursuit of this goal, a secondary purpose was to develop better storage conditions for skinned insect muscle which can maintain muscle structure and function. Maximum active force as a function of time in storage was compared for storing at 4℃ without glycerol and storing at -80℃ with 75% glycerol. The maximum force values were almost the same during days 0-4. However, the muscle stored at -80℃ with 75% glycerol gave higher active force in high calcium (pCa 4.5) solution over a longer time in storage than muscle stored at 4℃. Both ventral and dorsal muscles can deliver 40-50% of original active force for up to 21 days in storage. X-ray diffraction experiments were done to compare the response of chemically skinned Manduca flight muscle to temperature and to the induction of rigor. The lattice spacing (d10) decreased and intensity ratio I20/I10 increased when the temperature of the relaxing solution bathing the solution increased from 10℃ to 40℃. Lattice spacing (d10) decreased, but the I20/I10 intensity ratio increased slightly while concentration of dextran increased from 1% to 6%. Six percent dextran was insufficient to restore the in vivo lattice spacing.
M.S. in Molecular Biochemistry and Biophysics, May 2013
Show less

Title: Widget Applications to Enhance the Tru2Way Consumer Experience (sequence unknown), IPRO 312 - Deliverables
Creator: Alsharief, Yagoob, Aulfata, Muluken, Curtis, Christopher, Dhewaju, Anusuya, Mooney, Kevin, Mutyaba, Kevin, Ndoping, Marco, Onaissi, Samah, Peterson, Naomi, Siwek, Steven, Wallace, Sean, Yi, Won-jae
Date: 2009-12
Description: The IPRO teams objectives are to provide Comcast with feedback from an outside perspective, allowing them to see where their Tru2Way system...
Show moreThe IPRO teams objectives are to provide Comcast with feedback from an outside perspective, allowing them to see where their Tru2Way system needs additional attention or support.
Sponsorship: Comcast
Deliverables for IPRO 312: Widget Applications to Enhance the Tru2Way Consumer Experience for the fall 2009 semester
Show less

Title: MONITORING, MODELING, AND TREATMENT OF ODORS/ODORANTS AT WATER RECLAMATION PLANTS
Creator: Zhang, Yanming
Date: 2012-04-23, 2012-05
Description: A thorough study including odor monitoring, modeling and treatment as three important aspects of odor control in WRPs has been performed in...
Show moreA thorough study including odor monitoring, modeling and treatment as three important aspects of odor control in WRPs has been performed in this research. Measurement of H2S emissions from odor sources was proven to be an essential step in odor monitoring program. The H2S emission rates were measured from various sources throughout a WRP for 9 sampling events during winter and summer. During summer, both the average and the maximum emission rates of H2S from liquid treatment processes increased significantly compared to those measured during winter. However, for solids-handling processes, the emission rates remained constant because sludge characteristics did not vary throughout the year. The total sulfide concentrations present in liquid treatment processes were higher than those in preliminary and primary treatment units but at much lower levels in secondary treatment. Rates of H2S emission from the headworks were correlated to daily average wastewater temperature, TKN concentration, and flow rate. AERMOD was used as the modeling tool to evaluate the odor impact of Egan WRP on the surrounding communities. The emission rates could significantly affect the modeling results. Long-term H2S monitoring increases the possibility of developing the proper emission rate for the worst-case scenario. Excluding the modeling during the night would avoid overestimation of odor impact and excessive odor control. In the laboratory-scale study of O3 oxidation of H2S, O3 oxidation was proven to be a fast and effective method to remove H2S from the odorous air emitted from wastewater treatment processes. The increased initial ratio of O3/H2S enhances the removal rate of H2S. The consumption ratio of O3/H2S is a function of input reactant ratios. A multiple linear regression model (R2=0.84) has been developed to predict the H2S residual for given initial H2S and O3 concentrations and reaction time. The increased moisture content of the odorous air enhanced the H2S removal while DMS and DMDS inhibit H2S removal by competing for the limited O3 supply.
Ph.D. in Environmental Engineering, May 2012
Show less

Title: DETERMINATION OF REDUNDANCY IN STRUCTURES USING INTERVAL UNCERTAINTY ANALYSIS
Creator: Amirshaghaghi, Sayeh
Date: 2014, 2014-05
Description: Existence of redundancy in structures plays an important role in increasing their safety and reliability. However, using state-of-the-art...
Show moreExistence of redundancy in structures plays an important role in increasing their safety and reliability. However, using state-of-the-art deterministic and probabilistic approaches, all possibilities for estimation of redundancy (e.g. due to occurrence of different damage scenarios) have not been considered. One of the methods to quantify the presence of uncertainties in a system is to use interval variables. In this work, a new method for estimating the redundancy using interval structural analysis is developed. This method, hereafter referred to as Interval Redundancy Analysis (IRA), is robust and considers possibilities of strength reduction for each element leading to failure. Independent intervals for reduction of the strength for five damage scenarios of intact, slightly damage, moderately damaged, severely damaged, and completely damaged as well as strength of each element are considered. A numerical example to show the behavior of the developed method with comparison to Monte-Carlo simulation results is presented.
M.S. in Civil Engineering, May 2014
Show less

Title: AN ADAPTIVE RESCALING SCHEME FOR COMPUTING HELE-SHAW PROBLEMS
Creator: Zhao, Meng
Date: 2017, 2017-07
Description: In this thesis, we develop efficient adaptive rescaling schemes to investigate interface instabilities associated with moving interface...
Show moreIn this thesis, we develop efficient adaptive rescaling schemes to investigate interface instabilities associated with moving interface problems. The idea of rescaling is to map the current time-space onto a new time-space frame such that the interfaces evolve at a chosen speed in the new frame. We couple the rescaling idea with boundary integral method to demonstrate the efficiency of the rescaling idea, though it can be applied to Cartesian-grid based method in general. As an example, we use the Hele-Shaw problem to examine the efficiency of the rescaling scheme. First, we apply the rescaling scheme to a slowly expanding interface. In the new frame, the evolution is dramatically accelerated, while the underlying physics remains unchanged. In particular, at long times numerical results reveal that there exist nonlinear, stable, self-similarly evolving morphologies. The rescaling idea can also be used to simulate the fast shrinking interface, e.g. the Hele-Shaw problem with a time dependent gap. In this case, the rescaling scheme slows down the interface evolution in the new frame to remove the severe time step constraint that makes the long-time simulations prohibitive. Finally, we study an analytical solution to the stability of the interface of the Hele-Shaw problem, assuming a small surface tension under a time dependent flux Q(t). Following [116, 109], we find the motions of daughter singularity ζd and simple singularity ζ0 do not depend on the flux Q(t). We also find a criterion to identify the relation between ζ0 and ζd.
Ph.D. in Applied Mathematics, July 2017
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of