Search results

Title: Particle production at large momentum transfer, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
Creator: Gonçalves, V.p., Sauter, Werner K.
Date: 2013-09-15, 2013-09-15
Publisher: IIT Press
Description: Diffractive particle production in ep collisions and coherent pp interactions is studied assuming that the color singlet t channel exchange...
Show moreDiffractive particle production in ep collisions and coherent pp interactions is studied assuming that the color singlet t channel exchange carries large momentum transfer. The differential and total cross sections for vector meson and photon production are calculated using the non-forward solution of the LO and NLO BFKL equation at high energy and large momentum transfer and the predictions are compared with the DESY HERA data. Moreover, we estimate the rapidity distributions and total cross section for the J/Ψ and ρ production in coherent pp interactions at LHC energies. We predict large rates, which implies that the experimental identification can be feasible at the LHC.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less

Title: Chicago Intermodal Commuter Transit Development
Creator: Strailman, Chris
Date: 4/27/2011, 2011-05
Description: This project focuses on the connectivity of different forms of transit and different neighborhoods in Chicago. Starting at the scale of city...
Show moreThis project focuses on the connectivity of different forms of transit and different neighborhoods in Chicago. Starting at the scale of city wide transit systems, it narrows down to a specific node and deals with the design and planning of a transit oriented development.
Show less

Title: Development of Powered Resonance-tube Actuators for Aircraft Flow Control Applications
Creator: Raman, G., Mills, A., Kibens, V.
Date: 2004-12
Publisher: American Inst Aeronaut Astronaut
Description: The present paper addresses both active-flow-control actuator technology development and the demonstration of the effectiveness of actuators...
Show moreThe present paper addresses both active-flow-control actuator technology development and the demonstration of the effectiveness of actuators that could be easily integrated into practical aircraft applications. The actuator used is an adaptation of the Hartmann oscillator. Demonstration experiments that illustrate the effectiveness of this actuator include cavity tone suppression at transonic speeds and the reduction of jet-impingement tones. The actuator concept is based on a high-speed jet aimed at the mouth of a cylindrical tube closed at the other end. The result is a high-amplitude self-sustaining fluctuating field accompanied by an intense narrowband tone, all in the region between the supply jet and the resonance tube. Using unsteady pressure sensors and flow visualization, we explored the effect of varying actuator parameters such as the spacing between the power jet and the resonance tube, supply pressure, resonance-tube depth, diameter, shape, and lateral spacing. By varying the depth of the tube, the frequency could be varied from about 1.6 kHz to over 10 kHz and amplitudes as high as 156 dB (microphone location dependent) were obtained in the vicinity of actuation. To integrate this concept into practical aircraft applications, two generations of a more complex version of this device known as the powered resonance-tube bank (PRTB) were developed and demonstrated. Results indicate that by using high-frequency excitation at 5-kHz suppression levels in excess of 20 dB were consistently obtained over a range of operating conditions in both cavity and impingement flow situations. Based on our results, we have grounds to believe that a properly designed PRTB has significant advantages over conventional actuators such as acoustic, piezo, and oscillatory microstructures.
Show less

Title: URBAN RETROFIT OF THE HISTORICAL CITY OF AHMEDABAD, INDIA
Creator: Patel, Chanakya Dineshbhai
Date: 2012-11-26, 2012-12
Description: Most great cities of today originally started as small settlements on the banks of rivers. Ahmedabad, founded in year 1411 AD by emperor Ahmed...
Show moreMost great cities of today originally started as small settlements on the banks of rivers. Ahmedabad, founded in year 1411 AD by emperor Ahmed Shah indeed has a claim for thriving in all aspects of life for the past six centuries. Established as a small military settlement on the dry and sandy north Gujarat plains on the bank of river Sabarmati, Ahmedabad today is fifth largest city and seventh largest metropolitan of India. Geographically the Sabarmati River divides the city of Ahmedabad into two segments. Within each side of the city there are two distinct images, urban west and historic east. It could be stated that the historic district of city must now hold its position as the center both geographically and economically considering the overall metropolitan area of Ahmedabad. With rapid urbanization, the historic district is overlapped by today’s fast paced life and urbanity resulting a steady loss of its heritage and greater than that, a sense of place. This thesis proposes a conservation and reconstruction model for the historic district of Ahmedabad addressing the most fundamental issues of economic viability and sustainability. The main challenge driving this thesis is how to retrofit the historic district so that it matches the urbanity of 21st century along with keeping its historic character intact. The initial process is to assemble background observations and research that will provide an understanding of the concepts required for retrofitting the historic district of Ahmedabad. It is hopeful that the ideas and architectural process can also be a framework to be applied on other historic cores that have been neglected and suppressed by today’s urbanity and especially in Asian countries.
M.S. in Architecture, December 2012
Show less

Title: Oil Rig Eco Hotel: OilRigEcoHotel_Brochure
Creator: Marcan, Stephanie
Date: 2011, 2011-05
Description: By refashioning the design and programmatic use of an offshore oil rig into a luxury hotel for ecotourists, a new age of responsible travel...
Show moreBy refashioning the design and programmatic use of an offshore oil rig into a luxury hotel for ecotourists, a new age of responsible travel may emerge. By twisting the symbol of oil dependency into an ecologically preserved, environmentally accountable and revenue-producing prototype, the ideals of reuse, energy and environment can be viewed through a new lens. This design creates interesting and innovative living spaces and environments aided by sustainable integrations to create a “living machine” that establishes connections between all building systems as well as inhabitant inputs and outputs resulting in an energy independent habitat.
Show less

Title: Creative Public Library and Material Center
Creator: Phanuprasit, Praerin
Date: 2010-07-29

Title: LONG-TERM AEROBIC AND ANAEROBIC TRANSFORMATIONS OF ORGANIC MATTER IN ANAEROBICALLY DIGESTED BIOSOLIDS
Creator: Lukicheva, Irina
Date: 2012-12-05, 2012-12
Description: Long-term anaerobic storage of biosolids in a lagoons type of system as a post-treatment to anaerobic digestion is a proven process for...
Show moreLong-term anaerobic storage of biosolids in a lagoons type of system as a post-treatment to anaerobic digestion is a proven process for further pathogen reduction to produce Class A biosolids. At the same time, final biosolids product could develop odors during storage and handling, limiting the flexibility of biosolids utilization. The goal of this research was to study properties of biosolids under different lengths of aging time to determine the stability of final product for its odor potential. Field lagoons of Metropolitan Water Reclamation District of Greater Chicago were sampled to estimate the spatial and temporal variations in the physical-chemical properties and biological stability indicators, namely, total solids, volatile solids, pH, electric conductivity, total Kjeldahl nitrogen, ammonia-N, nitrite/nitrate-N, accumulated oxygen uptake for the 20-hour respirometric test, soluble protein concentration and headspace concentrations of volatile sulfur compounds. The sampling campaign was performed in October 2009. Two types of lagoons were assessed in this study- high-solids lagoons that are loaded with sludge that was previously anaerobically digested and dewatered on the centrifuges, and low-solids lagoons that are loaded with sludge that was previously digested but not dewatered. The analysis of collected data suggested that for the high-solids lagoons the surface layer biosolids (depth of above 0.15 m) undergo long-term aerobic oxidation resulting in higher degree of final product stabilization. The subsurface layers (depth below 0.15 m) are subjected to anaerobic environment where the conditions allow only the initial rapid organic matter degradation approximately within the first year, followed xii by very slow degradation. In addition, microbiological analyses using Fluorescent in situ Hybridization did not indicate active microbial communities in aged biosolids. The performance of low-solids lagoons in the reduction of the biodegradability parameters was shown to be similar to that of the high-solids lagoons. Low-solids lagoons were shown to perform the dewatering function reducing moisture in the digested sludge from initial 2-3% TS to up to 16% TS. Although the lagoon aged biosolids were found to be stable in comparison with other products, such as composts, further aerobic processes taking place after lagoons, such as air-drying and stock-piling could induce further active biological activity. This could potentially result in the odor formation from the air-dried final product. For these reasons, more research is required on the mechanisms promoting further product degradation after lagoons aging.
PH.D in Environmental Engineering, December 2012
Show less

Title: waterWORKS: Reed Webster Final Book
Creator: Webster, Reed
Date: 5/3/2011, 2011-05
Description: Water shortages will be a global problem by the year 2025. With the Great Lakes Basin accounting for 95% of the fresh water in the United...
Show moreWater shortages will be a global problem by the year 2025. With the Great Lakes Basin accounting for 95% of the fresh water in the United States it will soon become our most valuable natural resource. In re-defining urban relationships to the Great Lakes a healthy, ecologically stable, and regenerative water system can become our greatest national asset. Providing a prototype solution for one of these urban areas (Traverse City, MI) may set a precedent for long term protection of the Great Lakes.
Show less

Title: IMPROVEMENT OF BUS TRANSIT OPERATIONS BY MINIMIZING NON-REVENUE TRAVEL TIME
Creator: Arthur, Christina
Date: 2012-06-04, 2012-07
Description: There are many activities in which a transit agency can investigate reduce costs. Three main activities include service cuts, renegotiations...
Show moreThere are many activities in which a transit agency can investigate reduce costs. Three main activities include service cuts, renegotiations of union labor contracts and modifications to bus operations. The first activity, cutting service, is often a last resort because not only must an agency adhere to its budget but also its service standards. Service cutting can involve route eliminations, stop eliminations, reroutes and reductions in spans of service and frequency of service. These service cuts greatly impact the riders in which routes serve as well as the image of the agency. In order to maintain customer satisfaction and ridership, an agency may decide to employ the latter two activities. In essence these two types of activities, singularly or in combination, can produce a reduction in overhead costs to the agency by more efficiently operating services. This paper focuses on modifications to bus operations as it relates to pull-in and pull-out trips, commonly referred to as deadheading and operator travel to relief points. Using the urban bus operation of the Chicago Transit Authority, a model is developed to assign routes to garages given the locations of the pull-in and pull-out locations associated with each route. As the system currently exists, there are seven garages distributed across the city from which 144 bus routes start and end. Many of these routes are operated out of multiple garages. The main reason for these route-to-multi-garage assignments is garage capacity and scheduling needs. The goal of this research is to determine how routes can be assigned to one specific garage and still meet the requirements given by the schedule.
M.S. in Civil Engineering, July 2012
Show less

Title: ADVANCING DESIGN SIZING AND PERFORMANCE OPTIMIZATION METHODS FOR BUILDING INTEGRATED THERMAL AND ELECTRICAL ENERGY GENERATION SYSTEMS
Creator: Zakrzewski, Thomas
Date: 2017, 2017-07
Description: Combined electrical and thermal energy systems (i.e., cogeneration systems) will play an integral role in future energy supplies because they...
Show moreCombined electrical and thermal energy systems (i.e., cogeneration systems) will play an integral role in future energy supplies because they can yield higher overall system fuel utilization and efficiency, and thus produce fewer greenhouse gas emissions, than traditionally separate systems. However, methods for both design sizing and performance optimization for cogeneration systems and commercial buildings lag behind the tremendous advancements that have been made in building performance simulation methods. Therefore, the overall goal of this research is to develop and apply novel cogeneration system modeling techniques for optimizing design sizing and dispatch of generation sets that reduce energy use, energy costs, and greenhouse gas emissions. This research is divided into four main research objectives: (1) generalizing cogeneration performance of lean burn natural gas spark ignition reciprocating engines, (2) developing a new Design and Optimization of Combined Heat and Power (DOCHP) systems optimization tool for improving design-sizing of building-integrated and grid-tied CHP systems, (3) demonstrating the utility of the DOCHP tool with several practical applications, and (4) integrating on-site intermittent renewable energy systems into the DOCHP tool to analyze micro-grid applications. This research leverages recent developments in multiple areas of building and system simulation methods. DOCHP advances design sizing and performance optimization methods for building integrated thermal and electrical energy generation systems through the application of an evolutionary artificial intelligence-based genetic algorithm and its ability to resolve to non-linear optimization with discrete constraints while considering non-linear part-load generation set performance curves.
Ph.D. in Civil Engineering, July 2017
Show less

Title: Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 Brochure F08
Creator: Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
Date: 2008, 2008-12
Description: The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less

Title: ULTRALOW POWER SRAM DESIGN IN NEAR THRESHOLD REGION USING 45NM CMOS TECHNOLOGY
Creator: Chen, Yinhui
Date: 2011-05-10, 2011-05
Description: With the development of CMOS technology, the performance including power dissipation and operation speed is highly concerned for SRAM design....
Show moreWith the development of CMOS technology, the performance including power dissipation and operation speed is highly concerned for SRAM design. Desirable low power consumption while operating fast is the goal of design and improvement. However, the tradeoff between performance and speed is one of the most challenging obstacles that engineers are facing. Along with continuously scaling in the process technology, the concern for stability of Static Random Access Memories (SRAMs) is increasing in the design and test. Maintaining an acceptable Static Noise Margin (SNM) as well as scaling the minimum feature sizes and supply voltages of the Systems-on-a-Chip (SoC) becomes more and more challenging. Subthreshold leakage, dynamic power consumption and delay are major issues for circuits design, especially for SRAM design. Subthreshold leakage and dynamic power consumption can be decreased while supply voltage is scaled down. However, this may dramatically increase the circuit delay (Lindert, 1999) (Wang, 2004) (Zhai, 2004). In this dissertation, we first prepared fundamental knowledge of the CMOS technology as well as SRAM. According to the current researches on SRAM (Chang, 2005) (Chen, 2010), we proposed a novel 6t SRAM design which operates in near threshold region to optimize leakage power and speed. Negative word line is introduced to reduce the leakage current. A novel Latch-type voltage sense amplifier is proposed to improve the read speed of the proposed SRAM cell. The proposed SRAM design is implemented in 45nm technology and achieves more than 50% for power reduction, 68% for leakage reduction, 90% for write delay reduction and 78% for read delay reduction compared to traditional 6T SRAM in near threshold region. Although the proposed 6T SRAM inherit the disadvantage of 4T schematic in data retention, the operation stability is still respectable.
M.S. in Electrical Engineering, May 2011
Show less

Title: Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King (sequence unknown), IPRO 314 - Deliverables: IPRO 314 Project Plan F09_redacted
Creator: O’leary, Kevin, Petty, Sonya, Qi, Tianshu, Tan, Sophia, Noor, Nashrah, Schleich, Kenneth, Akhtar, Ayesha, Cheng, Eric, Kim, James, Parker, Joseph, Saha, Sougata
Date: 2009-12
Description: The objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Spo...
Show moreThe objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Sponsorship: Gage Park High School
Deliverables for IPRO 314: Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King for the fall 2009 semester.
Show less

Title: Jet Aeroacoustics
Creator: Raman, Ganesh
Date: 2008
Publisher: Multi-Science Pub.

Title: SURVIVAL AND ATTACHMENT OF SALMONELLA ENTERICA ON ALMOND, HAZELNUT, AND BLACK PEPPER
Creator: Zhai, Yang
Date: 2016, 2016-05
Description: S. Enteritidis (SE) and S. Typhimurium (ST) are the two most common Salmonella enterica serovars that cause foodborne illnesses in U.S....
Show moreS. Enteritidis (SE) and S. Typhimurium (ST) are the two most common Salmonella enterica serovars that cause foodborne illnesses in U.S. Outbreaks of these serovars have been attributed to low moisture foods such as nuts and spices. However, little is known about the mechanisms of attachment on low moisture food surfaces. This study evaluated the associations between attachment and survival of Salmonella enterica serovars, storage temperatures, and surface characteristics of selected food samples. In the study, S. Enteritidis PT4 and S. Typhimurium LT2 were inoculated onto the surfaces of black peppercorns, almonds and hazelnuts at ~108 CFU/g. After 2 h air-drying, samples were stored at 4 and 25°C with 58 ± 2% relative humidity for up to 14 d. At specific time points, the food sample were washed two times in 1 × Phosphate Buffered Saline (PBS) to remove attached bacterial cells. The bacterial suspensions were serially diluted and plated on Brain Heart Infusion (BHI) and Xylose Lysine Deoxycholate (XLD) agar plates for enumeration. Significant differences (P<0.05) were found in the survival and attachment of SE and ST under all the conditions. ST can survive and attach better than SE at both 4 and 25°C. The decline rates on almonds, hazelnuts, and black peppercorns at 25°C were 0.348 ± 0.017, 0.273 ± 0.015, and 0.196 ± 0.017 log CFU/g per day for SE and 0.077 ± 0.008, 0.157 ± 0.008, and 0.048 ± 0.005 log CFU/g per day for ST, respectively. The attachment rates on almonds, hazelnuts and black peppercorns at 25°C were 18.71 ± 14.38, 1.56 ± 1.50, and 4.68 ± 0.76% for SE and 38.46 ± 11.32, 18.45 ± 7.73, and 56.30 ± 14.72% for ST, respectively. In addition, low temperature (i.e. 4°C) may contribute more to the survival of Salmonella than ambient temperature (i.e. 25°C). Certain surface characteristics (roughness & hydrophobicity) of hazelnut may probably result in weaker attachment of both Salmonella serovars. The results can be used to better understand the physiology of Salmonella enterica on low moisture foods and aid in developing effective control measures to reduce pathogen contamination.
M.S. in Food Safety and Technology, May 2016
Show less

Title: DEVELOPMENT OF AN IMPLICITLY COUPLED ELECTROMECHANICAL AND ELECTROMAGNETIC TRANSIENTS SIMULATOR FOR POWER SYSTEMS
Creator: Abhyankar, Shrirang
Date: 2011-11, 2011-11
Description: The simulation of electrical power system dynamic behavior is done using tran- sient stability simulators (TS) and electromagnetic transient...
Show moreThe simulation of electrical power system dynamic behavior is done using tran- sient stability simulators (TS) and electromagnetic transient simulators (EMT). A Transient Stability simulator, running at large time steps, is used for studying rela- tively slower dynamics e.g. electromechanical interactions among generators and can be used for simulating large-scale power systems. In contrast, an electromagnetic transient simulator models the same components in finer detail and uses a smaller time step for studying fast dynamics e.g. electromagnetic interactions among power electronics devices. Simulating large-scale power systems with an electromagnetic transient simulator is computationally inefficient due to the small time step size in- volved. A hybrid simulator attempts to interface the TS and EMT simulators which are running at different time steps. By modeling the bulk of the large-scale power system in a transient stability simulator and a small portion of the system in an electromagnetic transient simulator, the fast dynamics of the smaller area could be studied in detail, while providing a global picture of the slower dynamics for the rest of power system. In the existing hybrid simulation interaction protocols, the two simulators run independently, exchanging solutions at regular intervals. However, the exchanged data is accepted without any evaluation, so errors may be introduced. While such an explicit approach may be a good strategy for systems in steady state or having slow variations, it is not an optimal or robust strategy if the voltages and currents are varying rapidly, like in the case of a voltage collapse scenario. This research work proposes an implicitly coupled solution approach for the combined transient stability and electromagnetic transient simulation. To combine the two sets of equations with their different time steps, and ensure that the TS and EMT solutions are consistent, the equations for TS and coupled-in-time EMT equations are solved simultaneously. While computing a single time step of the TS equations, a simultaneous calculation of several time steps of the EMT equations is proposed. Along with the implicitly coupled solution approach, this research work also proposes to use a three phase representation of the TS network instead of using a positive-sequence balanced representation as done in the existing transient stability simulators. Furthermore a parallel implementation of the three phase transient stability simulator and the implicitly coupled electromechanical and electromagnetic transients simulator, using the high performance computing library PETSc, is presented. Re- sults of experimentation with different reordering strategies, linear solution schemes, and preconditioners are discussed for both sequential and parallel implementation.
Ph.D. in Electrical Engineering, December 2011
Show less

Title: Waste to Work
Creator: Vlahakis, Meredith
Date: 2010-07-30

Title: VIBRATIONAL STABILIZATION OF A CHEMICAL REACTOR - AN EXPERIMENTAL-STUDY
Creator: Cinar, A., Deng, J., Meerkov, S. M., Shu, X. S.
Date: 1987-04
Publisher: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Description: Vibrational control is a method for modification of dynamic properties of linear and nonlinear systems by introduction of fast, zero-average...
Show moreVibrational control is a method for modification of dynamic properties of linear and nonlinear systems by introduction of fast, zero-average oscillations in a system's parameters. It has been previously shown that forced oscillations introduced in the reactant flow rates to a continuous stirred tank reactor (CSTR) cause a modification of theS- shaped steady-state curve. In the present note experimental evidence is given to show that this modification leads to the operation the CSTR at an asymptotically stable periodic regime located near an unstable steady-state of the reactor system having fixed flow rates. For a given average stabilized state, such a stabilizing mechanism results in a higher production rate or lower energy expenditure compared to a steady operation with shifted input conditions.
Endnote format citation
Show less

Title: IMPROVED SPATIAL-TEMPORAL RECONSTRUCTION FOR CARDIAC AND RESPIRATORY GATED SPECT
Creator: Qi, Wenyuan
Date: 2014, 2014-12
Description: Myocardial perfusion single photon emission computed tomography (SPECT) is an important imaging technique for evaluating coronary artery...
Show moreMyocardial perfusion single photon emission computed tomography (SPECT) is an important imaging technique for evaluating coronary artery disease. It can provide information of both myocardial perfusion and ventricular function. However, SPECT images su er from both cardiac and respiratory motion blur. In order to reduce the motion degrading, cardiac and respiratory gated SPECT imaging is used. In gated SPECT imaging, due to the lowered counts, the gated images will be more noisy than the ungated ones. Spatiotemporal (4D) processing is often used to reduce the noise level in gated images. In this thesis, we aim to investigate spatial and temporal processing techniques for improving the quality in cardiac and respiratory gated SPECT imaging. First, we will investigate a piecewise spatial smoothing prior based on totalvariation (TV) in 4D cardiac SPECT image reconstruction. In previous studies, it was found that spatial smoothing could adversely a ect the accuracy of 4D reconstruction in cardiac gated SPECT when temporal smoothing was applied, even though it could suppress the noise level. Our goal is to explore whether a piecewise spatial smoothing prior will improve the image accuracy while reducing the noise. Toward this goal, we will compare TV based piecewise spatial smoothing with quadratic spatial smoothing with simulated imaging, in which we will evaluate the lesion detectability. Clinical data will also be used to compare the results as a preliminary test. Motion-compensated temporal smoothing is known to play a key role in 4D cardiac gated SPECT reconstruction. Next, we will investigate whether better motion estimation could further improve the accuracy of reconstructed images. We will consider two di erent motion estimation models and the known motion in simulated experiments. The motion estimation methods are the classic optical ow estimation (OFE) and a periodic motion estimation method. We will evaluate the reconstruction from di erent motion models using several numerical quanti cation metrics. Furthermore, we will demonstrate reconstruction with the two motion estimation models using clinical acquisitions. Respiratory motion is known to cause motion blur in SPECT image reconstruction, and respiratory gated SPECT imaging can be e ective to combat its e ect. We will develop reconstruction techniques in respiratory gated SPECT. We will consider two reconstruction schemes for respiratory gated SPECT. The rst scheme is a post motion compensated reconstruction, in which images at di erent respiratory phases are reconstructed seperately, and afterwards are averaged over all the respiratory gates by motion compensation. The second scheme is a model based motion compensated reconstruction approach, in which one reference gate is used to describe the acquisition data of all the respiratory gates. Due to irregular respiratory motion, the data acquisition in each respiratory gate is not uniformly distributed among the acquisition angles, which would lead to limited-angle artifacts. To correct such artifacts, we propose an angle compensation method in the reconstruction. In order to deal with both cardiac and respiratory motion, we will investigate a 4D reconstruction approach for dual cardiac-respiratory gated SPECT reconstruction. This approach can accommodate the acquired data simultaneously from di erent cardiac and respiratory gates. It can exploit the correlation in the signal component among both the cardiac and respiratory phases. Both simulated experiments and clinical reconstruction will be used for evaluating this reconstruction approach. Due to the radiation risk of myocardial perfusion imaging (MPI) scans, there is an urgent need to lower the radiation dose used in SPECT. However, lower radiation dose will lead to more noisy reconstruction, which is even more serious in gated SPECT. We would explore the potential of using 4D reconstruction for lowering the dose in dual cardiac-respiratory gated SPECT.
Ph.D. in Electrical and Computer Engineering, December 2014
Show less

Title: Nibakure Children's Village School
Creator: May, Bryan
Date: 2010-07-13

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of