Search results

Title: AN ENERGY EFFICIENT ROUTING PROTOCOL FOR WIRELESS SENSOR NETWORKS
Creator: Lara, Aurobinda
Date: 2012-04-27, 2012-05
Description: Wireless distributed microsensor systems will enable the reliable monitoring of a variety of environments for both civil and military...
Show moreWireless distributed microsensor systems will enable the reliable monitoring of a variety of environments for both civil and military applications. A wireless sensor network consists of nodes that can communicate with each other via wireless links. One way to support efficient communication between sensors is to organize the network into several groups, called clusters, with each cluster electing one node as the head of cluster. Energy efficiency is of great importance for the wireless sensor network (WSN). A popular way to save energy is to construct clusters for data aggregation and forwarding. In this thesis a distributed cluster algorithm is studied to improve the energy consumption efficiency. It was observed that the cluster head has to lie within the transmission range of the base station (sink node) and the distance between cluster head and base station is critical for the energy consumption performance, we proposed a pseudo-cluster and virtual hierarchical clustering scheme (PC-LEACH), which considers the power level of the non-cluster head nodes and the residual energy level during the cluster head selection stage. Consequently we could better balance the chance of being cluster head for all nodes. Simulation results show that the scheme is able to result in longer network lifetime than the well-known protocol LEACH.
M.S. in Electrical Engineering, May 2012
Show less

Title: JET MIXING CONTROL USING EXCITATION FROM MINIATURE OSCILLATING JETS
Creator: Raman, G, Cornelius, D
Date: 1995-02
Publisher: AMER INST AERONAUT ASTRONAUT

Title: ENHANCEMENT OF BIODESULFURIZATION IN RHODOCOCCUS SPECIES (IGTS8) BY THE EXPRESSION OF VITREOSCILLA HEMOGLOBIN
Creator: Shivdas, Vrushali D.
Date: 2013, 2013-07
Description: The bacterium Rhodococcus sp. IGTS8 contains the dsz operon, which encodes a three enzyme pathway (the “4S pathway”) that is able to...
Show moreThe bacterium Rhodococcus sp. IGTS8 contains the dsz operon, which encodes a three enzyme pathway (the “4S pathway”) that is able to mineralize the sulfur contained in dibenzothiophene (DBT), an organic sulfur containing molecule found in petroleum. The gene vgb, which encodes Vitreoscilla hemoglobin (VHb), has shown wide usefulness in enhancing productivity and other useful properties when expressed in heterologous hosts. We engineered strain IGTS8 to express VHb and measured the effects on growth and desulfurization of DBT, using minimal medium containing DBT as the sole source of sulfur. VHb was clearly detected in the engineered strain using the standard COdifference spectral analysis, but its level (0.38-0.63 nmoles/gm wet weight of cells) was about 10-fold lower than commonly seen for expression of VHb in other heterologous bacterial hosts. The VHb-expressing strain was tested for growth at both low and high aeration in minimal medium containing DBT as sole sulfur source; growth was about 50% lower at low aeration compared with high aeration. Despite this, metabolism of DBT (as detected by accumulation of the end product of the 4S pathway, 2-Hydroxy biphenyl (2-HBP), in the growth medium) was about 30 % higher in the low aeration compared to the high aeration culture. A possible explanation for these results is direct enhancement of the first two (monooxygenase) steps in conversion of DBT to 2-HBP. It was thus concluded from the studies that the expression of vgb in Rhodococcus sp. IGTS8 enhances the process of biodesulfurization under conditions of low aeration
M.S. in Biology, July 2013
Show less

Title: PSECMAC Intelligent Insulin Schedule for Diabetic Blood Glucose Management Under Nonmeal Announcement
Creator: Teddy, S. D., Quek, C., Lai, E. M.-k., Cinar, A.
Date: 2010-03
Publisher: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Description: Therapeutically, the closed-loop blood glucose-insulin regulation paradigm via a controllable insulin pump offers a potential solution to the...
Show moreTherapeutically, the closed-loop blood glucose-insulin regulation paradigm via a controllable insulin pump offers a potential solution to the management of diabetes. However, the development of such a closed-loop regulatory system to date has been hampered by two main issues: 1) the limited knowledge on the complex human physiological process of glucose-insulin metabolism that prevents a precise modeling of the biological blood glucose control loop; and 2) the vast metabolic biodiversity of the diabetic population due to varying exogneous and endogenous disturbances such as food intake, exercise, stress, and hormonal factors, etc. In addition, current attempts of closed-loop glucose regulatory techniques generally require some form of prior meal announcement and this constitutes a severe limitation to the applicability of such systems. In this paper, we present a novel intelligent insulin schedule based on the pseudo self-evolving cerebellar model articulation controller (PSECMAC) associative learning memory model that emulates the healthy human insulin response to food ingestion. The proposed PSECMAC intelligent insulin schedule requires no prior meal announcement and delivers the necessary insulin dosage based only on the observed blood glucose fluctuations. Using a simulated healthy subject, the proposed PSECMAC insulin schedule is demonstrated to be able to accurately capture the complex human glucose-insulin dynamics and robustly addresses the intraperson metabolic variability. Subsequently, the PSECMAC intelligent insulin schedule is employed on a group of type-1 diabetic patients to regulate their impaired blood glucose levels. Preliminary simulation results are highly encouraging. The work reported in this paper represents a major paradigm shift in the management of diabetes where patient compliance is poor and the need for prior meal announcement under current treatment regimes poses a significant challenge to an active lifestyle.
Endnote format citation for DOI:10.1109/TNN.2009.2036726
Show less

Title: Test of a new type of storage cell
Creator: Allyn, A. J., Torrance, R. S.
Date: 2009, 1906
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testofnewtypeofs00ally
Thesis (B.S.)--Armour Institute of Technology

Title: DYNAMICS OF A THREE-DIMENSIONAL FOUR-BAR LINKAGE SUBJECT TO RANDOM EXTERNAL FORCING
Creator: Lytell, Mark R.
Date: 2011-11-15, 2011-12
Description: This thesis explores the dynamics of a three-dimensional four-bar mechanical linkage subject to random external forcing. The Lagrangian...
Show moreThis thesis explores the dynamics of a three-dimensional four-bar mechanical linkage subject to random external forcing. The Lagrangian formulation of the equations of motion are index-3 stochastic di erential-algebraic equations (SDAE) that describe the time evolution of the sample paths of the generalized coordinates, velocities, and Lagrange multipliers as stochastic processes. We solve the SDAEs using two di erent approaches: inverse dynamics, Case Study 1, via independent, successive solution of the nonlinear equations for each kinematic variable, where the time evolution of one generalized coordinate is prescribed; and direct dynamics, Case Study 2, via direct solution of the SDAEs in the index-1 formulation, using fourth-order stochastic backward di erentiation formula (BDF) with modi ed Newton iteration and position and velocity stabilization (Ascher and Petzold [2]), where the (deterministic) input driving torque is prescribed. For the particular application of a three-dimensional swing gate security system, we conduct numerical experiments for both approaches. In Case Study 1, we simulate the random external forcing as a Gaussian wind speed process that applies stochastic wind drag onto the gate. The kinematic variables are deterministic, while the required input driving torque is a stochastic process. In Case Study 2, we apply the external forcing as a resistive torque with additive Gaussian noise modeling the wind drag; the kinematic variables are stochastic processes. For both cases, we apply four mean wind speeds: 0 mph (deterministic only), 10 mph, 20 mph, and 30 mph, from which we compute the deterministic solution and three stochastic sample paths for each stochastic process. The overall conclusions are that direct solution is possible for inverse dynamics, that the solution of index-1 SDAEs in multibody dynamics is tractable since the mass matrix is symmetric and positive de nite, and that the deterministic solution is the expectation of the sample paths.
M.S. in Applied Mathematics, December 2011
Show less

Title: GENOME ANNOTATION AND PHYLOGENETIC ANALYSIS OF 27 SALMONELLA STRAINS BASED ON BIOINFORMATIC ANALYSIS OF RESPECTIVE GENOMES AND THREE GENES
Creator: Li, Xinyue
Date: 2013-04-15, 2013-05
Description: Salmonella is the most common food-borne bacterial infectious pathogen worldwide. Different serovars of Salmonella are capable of infecting...
Show moreSalmonella is the most common food-borne bacterial infectious pathogen worldwide. Different serovars of Salmonella are capable of infecting different kinds of hosts, such as humans, mice, pigs, chickens, and can also lead to different syndromes, such as enterica fever, enterocolitis and diarrhea, bacteremia and chronic asymptomatic carriage. Although Salmonella strains are quite diverse, strains within the same serovar usually infect the same host and cause similar symptoms. Thus, it is important, especially in food-borne disease outbreaks, to know which type of Salmonella is present. The current method of typing Salmonella is based on the Kaufmann-White scheme and MLEE, which are laborious and expensive. Although the reliability of this method has not been previously verified, the evolutionary relationship reflected by phylogenetic trees can be a possible alternative to the way of typing the Salmonella strains; this method would be less labor intensive and more economical. MLST is considered as a “gold standard” of typing for many species includes Salmonella. And genome sequence, which certainly reflects the evolutionary relationship of strains, is the most ideal data to construct a more reliable phylogenetic tree; however, genome sequencing is also a laborious and expensive process. Thus, conserved and ubiquitous gene data, which can be accessed with little effort, are generally used to minimize cost. Using16s rRNA is the most widely used method. In this study, 27 Salmonella genome sequences are annotated with RAST, and phylogenetic trees are constructed using three software, (phylip3.69, MEGA5.1, and CVTree). And MLST is also used to construct phylogenetic tree in this study, and the result is used to be compared with genome phylogenetic tree to find a more reliable reference tree. Although Neighbor-Joining method is the only algorithms x available in CVTree, phylip3.69 and MEGA5.1 are capable to use three separate algorithms(Maximum Parsimony, Maximum Likelihood, and Neighbor-Joining, respectively). Finally, these trees are compared in an effort to find a good alternative to replace the reference phylogenetic tree. In this study, it was determined that the groEL gene would be the best replacement.
M.S. Biological and Chemical Sciences, May 2013
Show less

Title: Reclaiming the Lake: Ecological Infrastructure as a Catalyst for Change
Creator: Searle, Gideon
Date: 2010-07-30

Title: Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 Ethics F08
Creator: Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
Date: 2008, 2008-12
Description: The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less

Title: SEARCHING ENCRYPTED CLOUD DATA
Creator: Urs, Karthik Mahendra Raje
Date: 2011-05-04, 2011-05
Description: The major setback of the cloud is its inability to induce strong trust in its users. For us, the users of the cloud, to be sure of the...
Show moreThe major setback of the cloud is its inability to induce strong trust in its users. For us, the users of the cloud, to be sure of the security of the data from other users, we have to trust cloud. In most of the cases, say if the data were to be hosted on Microsoft’s servers, we can trust Microsoft in its policies to prevent unauthorized access to it from other users (via hacking). But, the issue that is haunting the cloud is this - ”How can we be sure that our data is safe from Cloud service providers themselves?” The most intuitive solution for the cloud service provider to gain trust is to insist we encrypt our data. That is an irrefutable act of honesty from the cloud. But this has some obvious setbacks, few of which would negate the very advantages of cloud. One such issue that dictates the scope of this thesis is this - Typical cryptographic algorithms are not amenable to search. Now, if we were to implement a search engine on cloud (which has the data encrypted), the native search techniques have to be extended on to the cryptographic domain so that the cloud can perform the tasks of a search engine. This thesis explores the solutions to the above mentioned problem of searching over encrypted data, specifically using a secure pre-processed index approach. Though significant ideas have been proposed in the area, there is no concrete implementation to analyze if it can be used in the industrial setting. The main goal of the thesis is to implement a system which supports a variety of searching techniques. We make use of Amazon EC2 and test out the designed systems to evaluate how feasible they are for immediate consumption by the industry.
M.S. in Computer Engineering, May 2011
Show less

Title: Screech Tones from Rectangular Jets with Spanwise Oblique Shock-cell Structures
Creator: Raman, G.
Date: 1997-01-10
Publisher: Cambridge Univ Press
Description: Understanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft...
Show moreUnderstanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft structures. Although the connection between shock-cell spacing and screech frequency is well understood, the relation between non-uniformities in the shock-cell structures and the resulting amplitude, mode, and steadiness of screech have remained unexplored. This paper addresses the above issues by intentionally producing spanwise (larger nozzle dimension) variations in the shock-cell structures and studying the resulting spanwise screech mode. The spanwise-oblique shock-cell structures were produced using imperfectly expanded convergent-divergent rectangular nozzles (aspect ratio = 5) with non-uniform exit geometries. Three geometries were studied: (a) a nozzle with a spanwise uniform edge, (b) a nozzle with a spanwise oblique (single-bevelled) edge, and (c) a nozzle that had two spanwise oblique (double-bevelled) cuts to form an arrowhead-shaped nozzle. For all nozzles considered, the screech mode was antisymmetric in the transverse (smaller nozzle dimension) direction allowing focus on changes in the spanwise direction. Three types of spanwise modes were observed: symmetric (I), antisymmetric (II), and oblique (III), The following significant results emerged: (i) for all cases the screech mode corresponds with the spanwise shock-cell structure, (ii) when multiple screech modes are present, the technique presented here makes it possible to distinguish between coexisting and mutually exclusive modes, (iii) the strength of shocks 3 and 4 influences the screech source amplitude and determines whether screech is unsteady. The results presented here offer hope for a better understanding of screech and for tailoring shock-containing jets to minimize fatigue failure of aircraft components.
Show less

Title: VALIDATION OF BAKING TO INACTIVATE SALMONELLA IN HIGH-PROTEIN AND HIGH-FAT MODEL FOODS
Creator: Wang, Wenqian
Date: 2017, 2017-07
Description: Baked food products, such as dry pet foods, undergo changes of temperature and water activity (aw) during forced hot air processes. As one of...
Show moreBaked food products, such as dry pet foods, undergo changes of temperature and water activity (aw) during forced hot air processes. As one of the most thermal resistant microorganisms in low-moisture/intermediate moisture foods, Salmonella’s thermal inactivation kinetics during these processes is not well understood and difficult to predict. The objective of this study was to evaluate thermal inactivation kinetics of Salmonella enterica serovar Agona 447967 in model high-protein (HP) and high-fat (HF) multiple-component foods baked in a laboratory-scale oven, as influenced by oven temperature and relative humidity (RH). Model high-protein and high-fat foods, formulated with wheat flour, soy protein and soy oil, were inoculated with Salmonella Agona to a level of ~9 log CFU/g, and mixed to form a homogenous dough. Dough samples (57 mm diameter x 6 mm thick) were baked (3 samples per dwell time, 6 dwell times per condition) in a lab-scale oven at 120°C (10% RH) and 85°C (20%, 35% RH, 50% RH), respectively. Temperature and aw were measured at the surface and geometric center of the product during baking. Processed samples were collected in sterile bags and immediately cooled in an ice-water bath. Salmonella was enumerated on trypticase soy agar supplemented with yeast extract and incubated at 37°C for 24 h. Similar reductions (p>0.05) of 5.12-, 5.11-, 4.55-, and 4.78-log CFU/g were achieved after 40 min at 120°C/10% RH, 90 min at 85°C/20% RH, 50 min at 85°C/35% RH, 8 min at 85°C/50% RH, respectively, in the high-protein model food. Similar results were achieved in the high-fat matrix. The aw at the geometric center of the product (initially at aw =0.98) did not change appreciably during baking, while the aw at the product surface, the location of least lethality, decreased significantly (p<0.05) during baking; the decreases were more pronounced at lower oven RH. The results indicate that thermal inactivation of Salmonella Agona was driven by temperature and relative humidity in the oven. Higher temperature and higher relative humidity level led to greater Salmonella inactivation.
M.S. in Food Process Engineering, July 2017
Show less

Title: VIBRATIONAL CONTROL OF AN EXOTHERMIC CSTR - PRODUCTIVITY IMPROVEMENT BY MULTIPLE INPUT OSCILLATIONS
Creator: Shu, X. S., Rigopoulos, K., Cinar, A.
Date: 1989-02
Publisher: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Description: A. Cinar et al. (1987) have shown that vibrational control of an exothermic continuous stirred tank reactor (CSTR) by vibrating the total flow...
Show moreA. Cinar et al. (1987) have shown that vibrational control of an exothermic continuous stirred tank reactor (CSTR) by vibrating the total flow rate modifies its behavior and leads to stabilized operation in its unstable steady-state region. Here, the effect of multiple vibrating inputs and the contribution of their phase shift are investigated. Theoretical and experimental results indicate productivity improvement and amplitude reduction in reactor temperature swings by vibrating both input flow rate and input concentrations.
Endnote format citation
Show less

Title: Automated control of high temperature short time pasteurization
Creator: Negiz, A., Cinar, A., Schlesser, J. E., Ramanauskas, P., Armstrong, D. J., Stroup, W.
Date: 1996-12
Publisher: ELSEVIER SCI LTD
Description: Cascade and multivariable control of a high temperature shot? time (HTST) pasteurization system were tested and compared with the performance...
Show moreCascade and multivariable control of a high temperature shot? time (HTST) pasteurization system were tested and compared with the performance of single-loop feedback control. Multivariable control was implemented on the basis of computations of product temperatures that yield equivalent lethality at a residence time of 15 s at 161 degrees F in the holding tube. Both cascade and multivariable controllers reduced product temperature fluctuations and overshoot compared to single-loop feedback control. Multivariable control was based on on-line computation of equivalent total lethality and it permitted operation at variable flow rates or at the most desirable temperatures for product quality and functionality. Copyright (C) 1996 Elsevier Science Ltd.
Endnote format citation
Show less

Title: The synchronous motor
Creator: Sleezer, Frank W., Williams, Wallace, Kelkenney, Artemas A.
Date: 2009, 1907
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/synchronousmotor00slee
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaves 35-37

Title: Hostile Spaces and Hostel Spaces: Re-Visioning Highway Infrastructure
Creator: Smith, Kevin
Date: 2010-07-30

Title: Polarised Drell-Yan physics at COMPASS, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
Creator: Franco, Celso
Date: 2013-09-15, 2013-09-15
Publisher: IIT Press
Description: The COMPASS experiment at CERN is one of the leading experiments studying the spin structure of the nucleon. Until now, the Parton...
Show moreThe COMPASS experiment at CERN is one of the leading experiments studying the spin structure of the nucleon. Until now, the Parton Distribution Functions (PDFs) and the Transverse Momentum Dependent Parton Distribution Functions (TMD PDFs) of protons and deuterons have been studied in Semi-Inclusive Deep Inelastic Scattering (SIDIS) measurements. The polarised Drell-Yan (DY) process is a complementary way to access the TMD PDFs, as it allows us to measure convolutions of only PDFs without involving fragmentation functions (FFs). COMPASS aims to perform the first ever polarised DY experiment in the world, which is foreseen to start in late 2014. By detecting dimuons from DY events we will be able to extract azimuthal spin asymmetries, each containing a convolution of two TMD PDFs, one from a negative pion beam with a momentum of 190 GeV/c and the other one from a transversely polarised proton target (NH₃). After their disentangling we can access four of the eight TMD PDFs needed to describe the nucleon structure at leading twist, like the Sivers and the Boer-Mulders functions. The opportunity to study, in the same experiment, the TMD PDFs from both SIDIS and DY processes is unique at COMPASS. Therefore, we are in privileged conditions to confirm or to deny the expected sign change in Sivers and Boer-Mulders functions when accessed via DY or SIDIS processes. An overview of the preparation and future measurements of the polarised DY experiment will be provided.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less

Title: Test and report of a modern ice plant
Creator: Heim, Karl, Fitch, Joseph E, Jones, Charles H, Hirschfeld, George
Date: 2009, 1909
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testreportofmode00heim
Thesis (B.S.)--Armour Institute of Technology

Title: THERMAL STABILITY OF FOOD ALLERGENS AND NONALLERGENIC PROTEINS: A COMPARATIVE STUDY
Creator: Wu, Yan
Date: 2015, 2015-07
Description: Thermal stability has been proposed as a criterion to assess the allergenic potential of genetically modified foods, but there is a lack of...
Show moreThermal stability has been proposed as a criterion to assess the allergenic potential of genetically modified foods, but there is a lack of information on the relative thermal stability of food allergens vs. nonallergenic proteins. This study compared the thermal stability of several paired food allergens and nonallergenic proteins by measuring the changes in their solubility, antigenicity and thermodynamic properties after thermal treatment using BCA total protein assay, inhibition ELISA assay, Differential Scanning Calorimetry and Far-UV Circular Dichroism Spectroscopy. The selected protein pairs included bovine α-lactalbumin (allergen) vs. human α-lactalbumin (nonallergen), peanut lectin (allergen) vs. concanavalin A (nonallergen), soybean trypsin inhibitor (allergen) vs. lima bean trypsin inhibitor (nonallergen). With respect to protein solubility, a greater thermal stability was observed for: (1) bovine α-lactalbumin (bovine ALA) when it was autoclaved in water compared with human α-lactalbumin (human ALA) (2) peanut lectin when it was boiled or autoclaved in water compared with concanavalin A (ConA) and (3) soybean trypsin inhibitor (STI) when it was boiled in water or PBS, or autoclaved in water compared with lima bean trypsin inhibitor (LTI). Regarding TM values determined by DSC: (1) bovine ALA was more thermally stable than human ALA under both dry-heat treatment and moist-heat treatment (2) ConA was more thermally stable than peanut lectin during moist-heat treatment, while a greater thermal stability was observed for peanut lectin when the protein was under dry-heat treatment (3) LTI was more thermally stable than STI during heating in water or under dry-heat treatment, while a greater thermal stability was observed for STI when the protein was heated in PBS. Based on CD analyses, (1) bovine ALA was more thermally stable than human ALA (2) peanut lectin was more thermally stable than ConA (3) STI and LTI showed similar thermal stability. With respect to antigenicity, a greater thermal stability was observed for: (1) human ALA when it was autoclaved in water compared with bovine ALA (2) ConA when it was boiled or autoclaved in water, or under dry-heat treatment at 176℃ compared with peanut lectin (3) STI when it was autoclaved in PBS compared with LTI. In summary, allergens tended to be more thermally stable than nonallergenic proteins with respect to solubility, but there was no consistent trend in the relative thermal stability of these protein pairs regarding the antigenicity or the TM values. No correlation between thermal stability of the proteins and their allergenic potential was observed.ConA (3) STI and LTI showed similar thermal stability. With respect to antigenicity, a greater thermal stability was observed for: (1) human ALA when it was autoclaved in water compared with bovine ALA (2) ConA when it was boiled or autoclaved in water, or under dry-heat treatment at 176℃ compared with peanut lectin (3) STI when it was autoclaved in PBS compared with LTI. In summary, allergens tended to be more thermally stable than nonallergenic proteins with respect to solubility, but there was no consistent trend in the relative thermal stability of these protein pairs regarding the antigenicity or the TM values. No correlation between thermal stability of the proteins and their allergenic potential was observed.
M.S. in Food Safety and Technology, July 2015
Show less

Title: DEVELOPMENT OF AN EMBEDDED CONTROLLER FOR TWO QUADRANT OPERATION OF BLDC MOTORS IN AUTOMOTIVE APPLICATIONS
Creator: Liu, Yizhe
Date: 2011-07-06, 2011-07
Description: Due to growing concerns over the availability of non-renewable petroleum products and the increasing emphasis on protecting our environment...
Show moreDue to growing concerns over the availability of non-renewable petroleum products and the increasing emphasis on protecting our environment from green house gas emissions, plug-in hybrid electric vehicle and hybrid electric vehicles have been gaining increasing popularity over recent years. This has led to the design of advanced drive systems using different electric motors such as BLDC, PMSM, IM and SRM. An electric motor/generator requires controller that not only has a strong I/O control function, but also high speed signal processing ability for realizing real time control. Therefore, a DSP (Digital Signal Processors), which integrates flexible multiple PWM signal generator, high speed high precision ADC and encoder interface for motor speed and position feedback, is considered as one of the strongest controllers for electric motor control. Owing to a growing emphasis on identification, interference, and communication of security services of drive train in intelligent PHEVs and HEVs, a DSP can also be used to identify and isolate security issues in the integrity of the drive train in PHEVs and EVs. This thesis has two main contributions: a) it focuses on the development of an embedded controller using TMS320LF2812 DSP to realize two quadrant control of the BLDC; and b) it develops an automotive test bench to identify and investigate some potential security issues using the embedded controller’s eCAN communication function.
M.S. in Electrical Engineering, May 2011
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of