Search results

Title: FLIP-FLOP JET NOZZLE EXTENDED TO SUPERSONIC FLOWS
Creator: Raman, G, Hailye, M, Rice, Ej
Date: 1993-06
Publisher: AMER INST AERONAUT ASTRONAUT
Description: An experiment studying a fluidically oscillated rectangular jet flow was conducted. The Mach number was varied over a range from low subsonic...
Show moreAn experiment studying a fluidically oscillated rectangular jet flow was conducted. The Mach number was varied over a range from low subsonic to supersonic. Unsteady velocity and pressure measurements were made using hot wires, piezoresistive pressure transducers, and pitot probes. In addition, smoke flow visualization using high-speed photography was used to document the oscillation of the jet. For the subsonic flip-flop jet, it was found that the apparent time-mean widening of the jet was not accompanied by an increase in the mass flux. Fluidically oscillated jets up to a Mach number of about 0.5 have been reported before, but to our knowledge there is no information on fluidically oscillated supersonic jets. It was found that it is possible to extend the operation of these devices to supersonic flows. The streamwise velocity perturbation levels produced by this device were much higher than the perturbation levels that could be produced using conventional excitation sources such as acoustic drivers. In view of this ability to produce high amplitudes, the potential for using a small-scale fluidically oscillated jet as an unsteady excitation source for the control of shear flows in full-scale practical applications seems promising.
Show less

Title: The utility of the pyrometer on carburetted water gas machines
Creator: Heath, Chester S.
Date: 2009, 1911
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/utilityofpyromet00heat
Thesis (B.S.)--Armour Institute of Technology, 1911 B.S. in Mechanical Engineering, 1911

Title: SENSITIVITY ANALYSIS: INFLUENCE OF INFLUENT VARIABLES ON A WRP MODEL
Creator: Wang, Xiaolong
Date: 2015, 2015-07
Description: Balancing between cost and effluent quality at the Calumet water reclamation plants (WRP) is important. Influent quality has strong effects on...
Show moreBalancing between cost and effluent quality at the Calumet water reclamation plants (WRP) is important. Influent quality has strong effects on effluent quality. In this study, based on a simulation model, the influence of influent parameters on effluent ammonia concentration is identified by sensitivity analysis methods. Nine sensitivity analysis methods, including two mathematical methods, five statistical methods, and two graphical methods, are presented. Using different sensitivity analysis, most results presented all main effects have stronger effects than interactions among input variables on the output. Water temperature is always the most important parameter; the most important interaction effect is between water temperature and SS. Key words: Sensitivity analysis; water reclamation plants; design of experiments; simulation model; influent water quality; effluent ammonia
M.S. in Environmental Engineering, July 2015
Show less

Title: THE PALAIS GARNIER: TOWARD AN ARCHITECTURE OF DANCE AND MUSIC IN XIX CENTURY FRANCE
Creator: Vranas Olsen, Cynthia
Date: 2017, 2017-05
Description: As a doctoral candidate, this writer has focused on the Romantic Movement of 19th century France, where the arts mutually influenced each...
Show moreAs a doctoral candidate, this writer has focused on the Romantic Movement of 19th century France, where the arts mutually influenced each other, just as in ancient Greece and Rome. This research highlights the interrelationships of the Arts to Architecture by examining artists such as Hugo in drama, Gautier in literature, Delacroix in painting, Chopin and Adam in music, Noverre in dance and Garnier in architecture. Although Noverre’s specialty was dance, he believed that theater buildings were first monuments to the arts. For Garnier, 100 years later, the Arts and Architecture were not separate identities. They complemented and enhanced one another. Both books, Observations sur la Construction d’une Nouvelle Salle de l’Opera by Jean-Georges Noverre and Le Theatre by Charles Garnier, were publications translated extensively from French to the English language as primary sources. In designing a theater building, the architect is responsible for synthesizing and translating myriad information in order to create an appropriate and responsive language. An invaluable knowledge of technical considerations - set design, lighting, backstage equipment, sightlines, acoustics and facilities for performers - is critical, as is balancing the client’s concerns and the user/spectator’s needs. As performance expresses a cultural instinct for communicative involvement, this writer believes that a theater building, itself, is a reflection of the arts. It is art, therefore, that inextricably shapes the programs and designs of our theater buildings. The Palais Garnier, completed in 1875 for the Paris Opéra and its associated Paris Opéra Ballet, is thought to mirror the cultural complexity of the age. Before this time, the Paris Opéra was housed in the Salle Le Peletier, a temporary building with inadequate facilities that did not reflect the existing, lavish, highly skilled art that was performed. Garnier’s travels to ancient sites in Greece and Rome resulted in his classic book, Le Théatre. By writing, he immersed himself in the study of the physical qualities of the theater, and it eventually became his architecture. The form and character of the theater buildings studied reflect the changing social structures, technology and patronage that sponsored them. The Palais Garnier reflects a unique intersection of the arts, along with the political, social and economic influences of that time. Musicians turned their attention toward the expressions of intense feelings that were influenced by poetry and the visual arts. The Palais Garnier, with its grandeur and opulence, became its own “performance”. The multi-disciplinary nature of architecture and the study of the interrelationships of the arts can inform creativity. Just like the timeless, majestic Palais Garnier in Paris, in 19th century France, new architectural structures can become their own profound monumental and memorable “performances” for future generations.
Ph.D. in Architecture, May 2017
Show less

Title: Facade Retrofit - High Performance Facade Systems for an Existing Building
Creator: Velichkova, Gergana
Date: 5/4/2011, 2011-05
Description: THE FAÇADE HAS THE HIGHEST POTENTIAL WHEN TRYING TO OPTIMIZE THE ENERGY PERFORMANCE OF A BUILDING. THE MAIN GOAL OF THE PROJECT IS TO...
Show moreTHE FAÇADE HAS THE HIGHEST POTENTIAL WHEN TRYING TO OPTIMIZE THE ENERGY PERFORMANCE OF A BUILDING. THE MAIN GOAL OF THE PROJECT IS TO INVESTIGATE WHAT IS THE VALUE OF FACADE RETROFIT AND STUDY THE RELATIONSHIP BETWEEN PERFORMANCE, WEIGHT, EMBODIED ENERGY, ASSEMBLY EFFORT, COST AND POTENTIAL SAVINGS. 4 DIFFERENT FACADE SYSTEMS ARE ANALYZED AND COMPARED IN THE CONTEXT OF AN EXISTING BUILDING. ONE OF THE SYSTEMS IS CURRENTLY INSTALLED AND HAS BEEN RECENTLY RETROFITTED, WHILE THE OTHER THREE ARE DESIGN PROPOSALS WHICH FOCUS ON THE FOLLOWING ASPECTS: PERFORMANCE AND DAYLIGHT, MINIMAL STRUCTURE AND ADAPTABILITY.
Sponsorship: Sobek, Werner
Show less

Title: Delta Shelter (sequence unknown), IPRO 311 - Deliverables: 311
Creator: Schug, Timothy, Bradley, Joshua, Cahan, Noah, Dobbin, Dan, Hallenbeck, Jeff, Jordan, Davyd, Strandquist, Brad, Dohm, Jacob, Hoffman, Kent, Lee, Woong-kyo, Waisath, Nathan
Date: 2009-12
Description: The Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects...
Show moreThe Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects of the DTD house and their operations to create a more energy efficient fraternity. During the term, the team will consider possible alternatives to many issues including but not limited to: mechanical heating system, building envelope, thermal properties of buildings perimeter, roofing materials, air infiltration, ventilation, and occupancy trends.
Deliverables for IPRO 311: Delta Shelter for the fall 2009
Show less

Title: Impacts of Sulfur Capture Technology in Coal Power Plants (sequence unknown), IPRO 302 - Deliverables: IPRO 302 Poster F09
Creator: Contreras, Abraham, Dickman, Justin, Enadeghe, Gregory, Garcia Rodriguez, Hector, Haddad, Michael, Kyle, Ryan, Mongillo, Michael, Murphy, Ryan, Shonubi, Oluwaseun, Swillum, Bryce, Wolber, Brian, Worthon, Terrika
Date: 2009-12
Description: The IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United...
Show moreThe IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United States. It planned to use this knowledge to determine which sulfur capture technologies produce the greatest benefit for industry and society and to find the marketability of the sulfur byproducts created in these power plants.
Sponsorship: Sargent & Lundy, LLC
These are the deliverables for IPRO 302: Impacts of Sulfur Capture Technology in Coal Power Plants from the Fall 2009 semester.
Show less

Title: Agricultural Rehabilitation Tower: Thesis Project_RGG_JYL
Creator: Garcia, Rodrigo, Lee, Jennifer
Date: 5/4/2011, 2011-05
Description: to create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to...
Show moreto create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to create a ‘vertical façade farm’ capable of producing 156 tons of vegetables (predominantly lettuce, tomatoes, peppers, and strawberries) and 200 tons of fish per year to create a mental health sanctuary (or sanatorium) that provides short term (days), midterm (months) and long term (years) residence and care for people with mental health issues that may require physical operations and/or psychological care. to actively engage the mental health residents in aspects of the agricultural production to draw on research showing that engagement with plants/nature assists in mental healing. to create a large multi-purpose space at the ground floor of the building which will largely serve as a farmer’s market for sale of the agricultural produce and engagement between the community residents and the public to create a series of gardens/green spaces at height within the complex, as well as vertical green walls, for healing (residents and urban issues) to use the double-skin ‘façade farm’ for assisting in passive natural ventilation of internal spaces
Show less

Title: HIGH PERFORMANCE AND LOW POWER HARDWARE IMPLEMENTATION FOR CRYPTOGRAPHIC HASH FUNCTIONS
Creator: Zhang, Yunlong
Date: 2013-04-30, 2013-05
Description: In this thesis, we introduce hash encryption functions which are widely used in a number of protocols as digital signature to protect privacy...
Show moreIn this thesis, we introduce hash encryption functions which are widely used in a number of protocols as digital signature to protect privacy information. Since the hash algorithm can be speeded up and be more security by physical protection, hash function hardware implementation is more desired today for evaluating its performance and processing data with dramatically increased size. Then we consider those two problems in the hash function hardware implementation: throughput and power consumption. High level of throughput is significant for the efficiency of hash algorithm. By using unfolding transformation, the throughput of hash function can be increased apparently. However, power consumption, area and critical path delay will also be increased. Pipeline and parallelism is an effective technique to decrease the critical path delay, by analyzing the construction of computing process. Another Problem is power consumption which will influence the reliability and cost of device. Clock gating is a widely used and efficiency technique for dynamic power reducing at register transfer level (RTL). There are two basic modes for single level clock gating: XOR-based clock gating and load-enable based clock gating [13]. The former one is based on the comparing between output and input of flip-flops (FFs). Although this XOR-based clock gating technique is not used in our hash function hardware implementation, we will briefly introduce some techniques of this method which is our previous research work for dynamic power reduction by comparing some RTL low power techniques. x Next, load-enable based clock gating which works with an enable signal is introduced. According to the idle mode of some components in our simply hash encryption system, we use this load-enable based clock gating to eliminate wasted toggle rate of some signals, thus reducing dynamic power consumption. Finally, according to the source of dynamic power dissipation, reducing clock frequency is another choice. Frequency trade-off technique is proposed, which combines unrolling transformation with frequency scaling. In this technique, a scope of frequency value is given in each hash function with different number of iteration rounds for trading off low dynamic power consumption and high throughput.
M.S. in Electrical Engineering, May 2013
Show less

Title: Orthotics and Prosthetics in Latin America (sequence unknown), IPRO 309 - Deliverables: IPRO 309 Midterm Presentation F09
Creator: Ashley, Trevor, Claxton, Matt, Conover, Stephen, Gotanco, Francis, Mathai, Alexander, Nizich, Adam, Park, Yong, Quikr, Kerry, Ray, Monmayuri, Vasquez, Raul
Date: 2009-12
Description: The overall goal of our IPRO team is to create a program for delivering orthotics and prosthetics that is sustainable. This will be...
Show moreThe overall goal of our IPRO team is to create a program for delivering orthotics and prosthetics that is sustainable. This will be accomplished by improving the quality of the product by increasing availability of funding, improving cost effectiveness of prosthetics, and promoting awareness of treatment available.
Deliverables for IPRO 309: Orthotics and Prosthetics in Latin America for the fall 2009 semester.
Show less

Title: REAL TIME STATIC SCENE 3D RECONSTRUCTION USING DEPTH SENSORS FOR AUGMENTED TELEOPERATION
Creator: Srinivasan, Ranga Ramanujam
Date: 2015, 2015-05
Description: In the first part of this Master’s Thesis, literature survey is done to find the best performing algorithm in terms of real-time performance...
Show moreIn the first part of this Master’s Thesis, literature survey is done to find the best performing algorithm in terms of real-time performance and quality of 3D reconstruction from depth images. Kinfu of PCL is found to be the best in terms of real-time performance and maintainability, as it is open-source software, with thousands of users working on to improve it. The primary part of the thesis is to improve on the 3D reconstruction quality of Kinfu and this is achieved by improving on the three important stages of Kinfu, Depth Filtering, Pose-estimation and 3D reconstruction. A new Anisotropic depth filtering kernel is proposed and it is found to give 23% quantitative improvement over baseline Kinfu. A modified pose-estimation which incorporates the uncertainty or error characteristics of the depth measured as part of the ICP algorithm is proposed. This results in a 51% quantitative improvement and a big subjective quality improvement over baseline Kinfu. A similar approach based on depth error characteristics but applied to 3D reconstruction stage which is based on an already published paper [1], is implemented. All the improvements in each of the three stages are combined together, to get a robust, real-time 3D reconstruction framework.
M.S. in Electrical Engineering, May 2015
Show less

Title: Cure for the IKIA Syndrome : presented at IACRL 2008 conference
Creator: Uth, Charles, Link, Jeanne
Date: 2008-02
Description: Informal observations of a practical and creative approach piloting Blended Library Instruction for undergraduate Civil Architecture and...
Show moreInformal observations of a practical and creative approach piloting Blended Library Instruction for undergraduate Civil Architecture and Engineering students, in collaboration with faculty. At Illinois Institute of Technology students don’t receive library instruction as a required class or in tandem with a composition class. Faculty will schedule one-time sessions, which ideally should be planned with a class assignment in mind, but students are rarely engaged with a one time instruction. Many have IKIA syndrome or I Know It Already syndrome. The Millennials are a group that has integrated technology into every aspect of their lives and they assume that retrieving useful or necessary information will be easy. When they discover this isn’t the case lack of time, heightened anxiety, and increased frustration can prevent them from doing their best work. By intentionally creating a similar crisis prior to library instruction, students were more interested in what they stood to gain during pending library instruction. In this presentation we will discuss: 1) A creative means of delivering library instruction to a traditionally challenging population: engineering undergraduate students 2) Qualitative information collected via multiple assignments and interpreted in a quantitative fashion, as well as our observations. 3) A method for preparing students for library instruction that can be applied in almost any discipline without asking the instructor to sacrifice class time.
Show less

Title: Computational Aeroacoustics
Creator: Raman, Ganesh
Date: 2008
Publisher: Multi-Science Pub.

Title: A study and test of a boiler efficiency indicator
Creator: Wetzel, Guy F.
Date: 2009, 1916
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studytestofboile00wetz
Thesis (B.S.)--Armour Institute of Technology

Title: Cure for the IKIA Syndrome : presented at IACRL 2008 conference: revised_assignment1for approval
Creator: Uth, Charles, Link, Jeanne
Date: 2008-02
Description: Informal observations of a practical and creative approach piloting Blended Library Instruction for undergraduate Civil Architecture and...
Show moreInformal observations of a practical and creative approach piloting Blended Library Instruction for undergraduate Civil Architecture and Engineering students, in collaboration with faculty. At Illinois Institute of Technology students don’t receive library instruction as a required class or in tandem with a composition class. Faculty will schedule one-time sessions, which ideally should be planned with a class assignment in mind, but students are rarely engaged with a one time instruction. Many have IKIA syndrome or I Know It Already syndrome. The Millennials are a group that has integrated technology into every aspect of their lives and they assume that retrieving useful or necessary information will be easy. When they discover this isn’t the case lack of time, heightened anxiety, and increased frustration can prevent them from doing their best work. By intentionally creating a similar crisis prior to library instruction, students were more interested in what they stood to gain during pending library instruction. In this presentation we will discuss: 1) A creative means of delivering library instruction to a traditionally challenging population: engineering undergraduate students 2) Qualitative information collected via multiple assignments and interpreted in a quantitative fashion, as well as our observations. 3) A method for preparing students for library instruction that can be applied in almost any discipline without asking the instructor to sacrifice class time.
Show less

Title: reVOLT: An Electric Vehicle Charging Station Prototype: Bristow_Abby_EVStation
Creator: Bristow, Abby
Date: 5/4/2011, 2011-05
Description: An electric vehicle charging station prototype. The project proposes coupling vehicle charging with other revenue generating program that...
Show moreAn electric vehicle charging station prototype. The project proposes coupling vehicle charging with other revenue generating program that grows and shrinks according to site restrictions. A small, medium, and large prototype are developed.
Show less

Title: Sloan Valve Company (sequence unknown), IPRO 306 - Deliverables
Creator: Delahanty, Sean, Jaouen, Julien, Thakkar, Hetul, Jones, Santiago Guerrero, Kim, Sung, Toor, Hammad, Jalan, Arjun, Soleja, Sikander, Zhang, Yayan
Date: 2009-12
Description: Sloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to...
Show moreSloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to pay' process and also assist in the development of a new warehouse management module.
Sponsorship: Sloan Valve Company
Deliverables for IPRO 306: Sloan Valve for the fall 2009 semester.
Show less

Title: MESOSCALE DEFORMATION IN A 9310 STEEL AND 2139 ALUMINUM ALLOY
Creator: Snyder, David
Date: 2012-09-10, 2012-12
Description: As technology continues to develop, the need for materials with superior structural performance grows. In recent years, the design of such...
Show moreAs technology continues to develop, the need for materials with superior structural performance grows. In recent years, the design of such high integrity alloys has led to a need for a more fundamental understanding of the deformation response of materials under various loading conditions. In this study, the deformation response of two high performance, high stacking fault metallic alloys are investigated. It has long been known that deformation in high stacking fault metals is a complex process of dislocation interactions that vary substantially with the loading conditions of strain, strain rate and temperature, as well as the chemistry and processing history of the alloy. The flow behavior and recrystallization response of a 9310 steel alloy deformed in the ferrite temperature range were studied in this work. Samples were compressed under various conditions of strain, strain rate and temperature using a Gleeble thermo-mechanical simulator. Deformation was characterized by both qualitative and quantitative means, using standard microscopy, electron backscatter diffraction (EBSD) analysis and flow stress modeling. The results indicate that deformation is primarily accommodated through dynamic recovery in sub-grain formation. EBSD analysis shows a continuous increase in sub-grain boundary misorientation with increasing strain, ultimately producing recrystallized grains from the sub-grains at high strains. This suggests that a sub-grain rotation recrystallization mechanism predominates in this temperature range. Demonstrated trends include a decreasing mean dynamically recrystallized grain size with increasing strain and Zener-Hollomon parameter, and an increasing recrystallized fraction with increasing strain. Another high stacking fault metal that has garnered a great deal of attention for its possible high performance structural applications is the 2139 aluminum alloy. In this study, the effect of chemistry and strain on the deformation response of the alloy system is investigated. 2139 aluminum is a very complex alloy, with multiple strengthening phases and mechanisms contributing to its overall high structural integrity compared to other aluminum alloys in its class. While the structural performance and TEM-scale deformation behavior of this alloy have been extensively analyzed, grain-scale microstructural features of deformation have not been well characterized. In addition, the contributions of each strengthening mechanism in the alloy are not well established. To characterize the deformation response of the alloy, alloys of various chemistries were produced and subjected to room temperature compression testing, in order to isolate and establish the effects of the major strengthening mechanisms on the overall behavior. Through electron backscatter diffraction analysis, the microstructural features of deformation generated in the alloys under these conditions were characterized, and the evolution and distribution of strain on a grain-scale was analyzed. Differences in deformation behavior with alloy chemistry were established by tracking differences in the evolution of lattice rotations with strain in the several alloys. It was determined that, for alloys subjected to artificial aging, the refinement in scale and distribution of the precipitate structure represents the greatest decrease in the development of lattice rotations with strain. This represents a first study into the room temperature, grain-scale deformation response of a heavily alloyed aluminum alloy, and the effect of alloy chemistry and precipitate structure on the deformation behavior of a 2139 aluminum alloy. As a preface to this study, a thorough review of the current state of literature on the deformation response of aluminum alloys was compiled as well.
M.S. in Materials Science and Engineering, December 2012
Show less

Title: Tungsten lamp as a secondary standard of light
Creator: Bremers, H. J., Jr., Chapman, A. J., Jr.
Date: 2009, 1910
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/tungstenlampasse00brem
Thesis (B.S.)--Armour Institute of Technology

Title: FORCED PERIODIC CONTROL OF AN EXOTHERMIC CSTR WITH MULTIPLE INPUT OSCILLATIONS
Creator: Rigopoulos, K., Shu, X. S., Cinar, A.
Date: 1988-12
Publisher: AMER INST CHEMICAL ENGINEERS
Description: Interaction among various oscillating inputs may result in significant modifications in the behavior of a system under forced periodic control...
Show moreInteraction among various oscillating inputs may result in significant modifications in the behavior of a system under forced periodic control. Forced oscillations in the input flow rate and input concentrations of an exothermic continuous stirred tank reactor enable the stabilized operation of the CSTR in the unstable steady state region. Reactor temperature oscillations under forced periodic control are similar to the oscillations resulting from proportional-integral feedback or nonlinear (push-pull) feedback control, and under some operating conditions the oscillation amplitude is significantly lower. Theoretical and experimental studies illustrate the effects of forcing frequency and phase shift on reactor behavior.
Endnote format citation
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of