Search results

Title: Multivariable MPC system performance assessment, monitoring, and diagnosis
Creator: Schaffer, J., Cinar, A.
Date: 2004-03
Publisher: ELSEVIER SCI LTD
Description: This study focuses on performance assessment and monitoring of model predictive control systems. A methodology is proposed to determine a...
Show moreThis study focuses on performance assessment and monitoring of model predictive control systems. A methodology is proposed to determine a benchmark and monitor model predictive control performance on-line. A performance measure based on the ratio of historical and achieved performance is used for monitoring and a ratio of design and achieved performance is used for diagnosis. Performance monitoring and diagnosis of causes for poor performance are integrated. A real-time knowledge-based system is developed to supervise monitoring and diagnosis activities. Case studies with linear and nonlinear models of an evaporator illustrate the methodology and limitations of linearity assumptions.
Endnote format citation for DOI:10.1016/j.jprocont.2003.07.003
Show less

Title: Multivariate statistical methods for monitoring continuous processes: Assessment of discrimination power of disturbance models and diagnosis of multiple disturbances
Creator: Raich, A. C., Cinar, A.
Date: 1995-11
Publisher: ELSEVIER SCIENCE BV
Description: A new methodology was reported [1,2] for integrated use of principal components analysis (PCA) and discriminant analysis in order to determine...
Show moreA new methodology was reported [1,2] for integrated use of principal components analysis (PCA) and discriminant analysis in order to determine out-of-control status of a continuous process and to diagnose the source causes for abnormal behavior. Most of the disturbances were identified with good rates of success, with a higher success rate for step or ramp type of disturbances. Quantitative tools that evaluate overlap and similarity between high-dimensional PCA models are proposed in this communication, and their implications on determining the discrimination power of PCA models of processes operating under disturbances are discussed. Diagnosis of several disturbances occurring simultaneously is also investigated. The criterion developed provide upper limits of discrimination power of various single and multiple process disturbances. The techniques developed are illustrated by assessing the process described by the Tennessee Eastman Control Challenge problem [3].
Endnote format citation
Show less

Title: NEUTRON PRODUCTION IN THE M2 MUON BEAM LINE AT CERN
Creator: Draeger, Emily
Date: 2014, 2014-05
Description: Spallation neutrons produced from cosmic ray muons are a major source of backgrounds in underground physics experiments. Experiments have been...
Show moreSpallation neutrons produced from cosmic ray muons are a major source of backgrounds in underground physics experiments. Experiments have been done to study spallation neutron production and yield, but our understanding of these processes is still limited. There are various interactions that can produce spallation neutrons. Most of these production mechanisms are fairly well understood; much of the uncertainty in our understanding of spallation neutrons lies in mechanisms such as virtual photon exchange and the assumptions used to calculate the photonuclear cross section. Even the experiments that have been carried out do not agree with each other or theoretical calculations. Spallation neutron production mechanisms are discussed, as well as a new experiment to study spallation neutrons. The impact of this study on current and future underground physics experiments is also explored.
PH.D in Physics, May 2014
Show less

Title: INTELLIGENT PROCESS-CONTROL WITH SUPERVISORY KNOWLEDGE-BASED SYSTEMS
Creator: Kendra, S. J., Basila, M. R., Cinar, A.
Date: 1994-06
Description: The integration of a supervisory knowledge-based system (KBS) with a multivariable control system is examined to provide robust multivariable...
Show moreThe integration of a supervisory knowledge-based system (KBS) with a multivariable control system is examined to provide robust multivariable control of a chemical reaction process. The supervisory KBS is capable of monitoring the process to detect system faults as well as assessing control system performance. If a control system performance deficiency is detected, the KBS formulates and implements the necessary corrective controller tuning. This adaptive capability reduces the conservatism of the robust control system. The underlying mechanisms are discussed and the re-tuning ability of the KBS is illustrated by using rigorous simulations of a chemical reaction process
Endnote format citation
Show less

Title: Planning the 21st Century Urban Farm: From High Rise to Neighborhood (sequence unknown), IPRO 336 - Deliverables: IPRO 336 Final Report F09
Creator: Bhatti, Talha, Binet, Adrien, Bredau, Jason, Chen, Emily, Davis, Jacob, Gaonkar, Gaurav, Garcia, Raul, Guerrero, Fernando, Gulling, Richard, Kagehiro, Michael, Moshfeghian, Elnaz, Nunez-gimeno, Jose, Phillips, Zachary, Plumb, Isaac, Ryan, Emily, Skaggs, Jake, Sobon, Konrad, Valmores, Travis
Date: 2009-12
Description: The purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. The growing problems regarding the...
Show moreThe purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. The growing problems regarding the traditional methods of agriculture, and the rate of growth of the world population, the team plans to design a method to grow food more efficiently and economically in urban areas. The team is looking at large, industrial warehouse-type buildings that have outlived their primary use, and creating a plan that utilizes these buildings to grow enough food for the surrounding communities.
Sponsorship: John Edel of Bubbly Dynamics, LLC
Deliverables for IPRO 336: Planning the 21st Century Urban Farm: From High Rise to Neighborhood for the fall 2009 semester
Show less

Title: Planning for Human Implantation of a Cortical Visual Prosthesis (sequence unknown), IPRO 334 - Deliverables
Creator: Bern, David, Chen, Shanyl, Deroo, Mary, Gorski, David, Kelly, Thomas, Leasenby, Alex, Li, Zhi, Pyrkh, Hanna, Subhani, Maham, Taneja, Aanchal
Date: 2009-12
Description: The Intracortical Visual Prosthesis is based upon that concept that by implanting a large number of subminiature electrodes within the human...
Show moreThe Intracortical Visual Prosthesis is based upon that concept that by implanting a large number of subminiature electrodes within the human visual cortex, coordinated temporal-spatial image information can be artificially communicated to the human visual cortex in the form of electrical currents, acting as a sensory substitute for normal vision.
Sponsorship: IIT Laboratory of Neural Prosthetic Research
Deliverables for IPRO 334: Planning for Human Implantation of a Cortical Visual Prosthesis for the fall 2009 semester
Show less

Title: NOVEL FAULT DIAGNOSTIC TECHNIQUE AND UNIVERSAL SENSOR FOR PERMANENT MAGNET ELECTRIC MACHINES USING SEARCH COILS
Creator: Da, Yao
Date: 2012-04-23, 2012-05
Description: Over the past decade, permanent magnet synchronous machines (PMSMs) have gained significant popularity in industry, such as wind turbines and...
Show moreOver the past decade, permanent magnet synchronous machines (PMSMs) have gained significant popularity in industry, such as wind turbines and electric vehicles, owing to their high efficiency, high output power to volume ratio, and high torque to current ratio. In these mission critical applications, an unexpected fault or failure of the machine could lead to very high repair or replacement cost, or even catastrophic system failure. Therefore a robust and reliable health monitoring and fault diagnostic approach is desired, which could help in scheduling preventive maintenance to lengthen their lifespan and avoid machine failure. This dissertation presents a novel multi-faults diagnostic approach using search coils. These search coils are wound around armature teeth, so they typically need to be installed during manufacturing. But its immunity to high frequency harmonics makes it suitable for inverter/rectifier fed motors or generators, such as wind turbines and automotive systems. In addition, this method does not require the knowledge of proprietary constructional details of the machine. Since the electromagnetic flux is directly measured in this method, it provides much more information than any other scheme: the direction of eccentricity and the location of shorted windings. Furthermore, this method is also capable of evaluating the severity of each fault, which is of significant importance in mission critical applications such as automotive, aerospace and military applications. In addition to these uses, the search coils can be used as a universal sensor to estimate phase current or rotor position, which are critical information in a PMSM close-loop control, which allow it to work as a backup sensor for fault tolerant operation. The proposed fault detection scheme and universal sensor concept have been tested under several scenarios with Finite Element Analysis and experimentally validated.
Ph.D. in Electrical Engineering, May 2012
Show less

Title: CELL-MATRIX INTERACTIONS IN ADIPOSE TISSUE FUNCTION
Creator: Vaicik, Marcella K.
Date: 2015, 2015-07
Description: The overall goal of this work is to apply in vivo and in vitro models to study the basement membrane protein laminin α4 (lama4) in adipocyte...
Show moreThe overall goal of this work is to apply in vivo and in vitro models to study the basement membrane protein laminin α4 (lama4) in adipocyte function. Adipose tissue accumulation, lipogenesis, and structure were examined in mice with a null mutation of the lama4 gene (Lama4−/−) and compared to wild-type animals (Lama4+/+). The Lama4−/−mice phenotype was investigated to evaluate if the differences were due specifically to the adipose tissue function. Physical activity and food intake does not differ between Lama4+/+ and Lama4−/− mice. However, Lama4−/− mice have a significantly increased metabolic rate at 25°C and 16°C compared to Lama4+/+ mice. In contrast, in thermoneutral conditions at 30°C both Lama4+/+ and Lama4−/− mice exhibit equivalent metabolic rates. Interestingly, when room temperature housed mice fat pads were evaluated with immunohistochemistry, Lama4−/− mice exhibit significantly increased UCP-1 expression in subcutaneous adipose. These results suggest that beiging, white to brown adipocytes, in subcutaneous adipose tissue in Lama4−/− mice may lead to decreased adipose tissue accumulation and improved metabolic function. While animal models indicate the absence of lama4 results in more beiging in subcutaneous adipose tissue, an in vitro tissue engineered model was developed to study the adipocyte function in a controlled microenvironment. Primary cell spheroids developed from Lama4+/+ and Lama4−/− were incorporated into synthetic poly(ethylene glycol) (PEG) hydrogels within a range of stiffnesses. When the cells were given the same chemical cues their functions differed depending upon microenvironment stiffness. Beige function in adipocyte cells in 3D can be influenced by matrix stiffness. In conclusion, the laminin alpha 4 basement membrane protein absence in adipose tissue results in adipocyte functional changes in vivo. The Lama4−/− mice have resistance to diet induced weight gain and increased metabolic rate at room temperature and when cold challenged. The Lama4−/− mice had increased beiging in the subcutaneous depot. Additionally, a tissue engineered model was developed to further study cell-ECM interactions first identified in an animal model. These in vivo findings and the engineered model of adipose tissue have great potential for studying obesity and other adipose related diseases. Future work will require continued interdisciplinary collaboration towards the successful identification and screening of novel therapeutics using engineered tissue models.
Ph.D. in Biomedical Engineering, July 2015
Show less

Title: Developing Web Applications for the Northern Illinois Hockey League (sequence unknown), IPRO 308 - Deliverables: IPRO 308 Midterm Presentation F09
Creator: Lucchesi, Kristin, Barksdale, Dustin, Hays, Julian, Bartus, Kryzystof, Perkins, William, Savage, Christopher, Scheer, Colin, Semenov, Vladimir, Vidutis, Mantas
Date: 2009-12
Description: The NIHL is the largest hockey league in Illinois. It is also the largest youth all star hockey league in the US, serving over 300 youth teams...
Show moreThe NIHL is the largest hockey league in Illinois. It is also the largest youth all star hockey league in the US, serving over 300 youth teams and over 4,000 players. The team's purpose is to make the NIHL a web-based scheduling and scoring applications that can support their annual operations.
Sponsorship: Northern Illinois Hockey League(NIHL)
Deliverables for IPRO 308: Developing Web Applications for the Northern Illinois Hockey League for the fall 2009 semester
Show less

Title: BOUNDING ESTIMATION INTEGRITY RISK FOR LINEAR SYSTEMS WITH STRUCTURED STOCHASTIC MODELING UNCERTAINTY
Creator: Langel, Steven Edward
Date: 2014, 2014-05
Description: Safety critical estimation applications require quantification of integrity risk, which is the probability of the state estimate error...
Show moreSafety critical estimation applications require quantification of integrity risk, which is the probability of the state estimate error exceeding predefined bounds of acceptability. Integrity risk can only be evaluated when the state estimate error probability density function is precisely known, necessitating stochastic models that exactly describe measurement noise and disturbance inputs. Uncertainty in these models directly results in inaccurate assessments of integrity risk. This dissertation develops the first implementable methods to upper bound integrity risk when the autocorrelation functions of stochastic inputs reside between upper and lower bounding functions. The first part of this work considers real-valued estimation applications that use the Kalman filter or batch weighted least squares estimator. Explicit relations are developed between the estimate error variance and autocorrelation functions using a new generalized covariance matrix derived in this dissertation. From these expressions, two methods are provided to upper bound integrity risk. The first method enables fast computation of a conservative bound, and the second method produces the minimum upper bound via semi-definite optimization. Mixed real/integer estimation applications utilizing integer bootstrapping are the focus of the second part of this work. The integrity risk bound is formally defined as the global solution to a non-convex optimization problem over a polytope. Determination of the polytopic region is difficult, and two bounding approaches are initially developed for a circumscribing hyper-rectangular feasible region. Using an innovative method to define the polytope together with linear programming, a third method is derived to upper bound integrity risk over the true polytopic feasible region.
PH.D in Mechanical and Aerospace Engineering, May 2014
Show less

Title: PA 508 Student Computer Usage Survey: PA508 Student Survey 2010 Results
Creator: Ahrens, Aric G.
Date: 2010-01-19, 2010-01-19
Description: Included are a survey, and the results in graphic form. The survey was designed to find out how and where the Chinese contingent of Master of...
Show moreIncluded are a survey, and the results in graphic form. The survey was designed to find out how and where the Chinese contingent of Master of Public Administration students used computers. The focus was to determine whether they preferred to use computers on the Downtown Campus, where classes were taught, or on Main Campus, where most of the students lived.
Show less

Title: Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 MidTerm Presentation F08
Creator: Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
Date: 2008, 2008-12
Description: The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less

Title: Impacts of Sulfur Capture Technology in Coal Power Plants (sequence unknown), IPRO 302 - Deliverables: IPRO_302_Project_Plan_final
Creator: Contreras, Abraham, Dickman, Justin, Enadeghe, Gregory, Garcia Rodriguez, Hector, Haddad, Michael, Kyle, Ryan, Mongillo, Michael, Murphy, Ryan, Shonubi, Oluwaseun, Swillum, Bryce, Wolber, Brian, Worthon, Terrika
Date: 2009-12
Description: The IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United...
Show moreThe IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United States. It planned to use this knowledge to determine which sulfur capture technologies produce the greatest benefit for industry and society and to find the marketability of the sulfur byproducts created in these power plants.
Sponsorship: Sargent & Lundy, LLC
These are the deliverables for IPRO 302: Impacts of Sulfur Capture Technology in Coal Power Plants from the Fall 2009 semester.
Show less

Title: EBSD CHARACTERIZATION OF LOW TEMPERATURE DEFORMATION MECHANISMS IN MODERN ALLOYS
Creator: Kozmel, Thomas S Ii
Date: 2015, 2015-05
Description: For structural applications, grain re nement has been shown to enhance mechanical properties such as strength, fatigue resistance, and...
Show moreFor structural applications, grain re nement has been shown to enhance mechanical properties such as strength, fatigue resistance, and fracture toughness. Through control of the thermo-mechanical processing parameters, dynamic recrystallization mechanisms were used to produce microstructures consisting of sub-micron grains in 9310 steel, 4140 steel, and Ti-6Al-4V. In both 9310 and 4140 steel, the distribution of carbides throughout the microstructure a ected the ability of the material to dynamically recrystallize and determined the size of the dynamically recrystallized grains. Processing the materials at lower temperatures and higher strain rates resulted in ner dynamically recrystallized grains. Microstructural process models that can be used to estimate the resulting microstructure based on the processing parameters were developed for both 9310 and 4140 steel. Heat treatment studies performed on 9310 steel showed that the sub-micron grain size obtained during deformation could not be retained due to the low equilibrium volume fraction of carbides. Commercially available aluminum alloys were investigated to explain their high strain rate deformation behavior. Alloys such as 2139, 2519, 5083, and 7039 exhibit strain softening after an ultimate strength is reached, followed by a rapid degradation of mechanical properties after a critical strain level has been reached. Microstructural analysis showed that the formation of shear bands typically preceded this rapid degradation in properties. Shear band boundary misorientations increased as a function of equivalent strain in all cases. Precipitation behavior was found to greatly in uence the microstructural response of the alloys. Additionally, precipitation strengthened alloys were found to exhibit similar ow stress behavior, whereas solid solution strengthened alloys exhibited lower ow stresses but higher ductility during dynamic loading. Schmid factor maps demonstrated that shear band formation behavior was in uenced by texturing in these alloys.
Ph.D. in Materials Science and Engineering, May 2015
Show less

Title: THERMODYNAMIC PROPERTIES AND PHASE EQUILIBRIA OF SELECTED HEUSLER COMPOUNDS
Creator: Yin, Ming
Date: 2015, 2015-12
Description: Heusler compounds are ternary intermetallics with many promising properties such as spin polarization and magnetic shape memory effect. A...
Show moreHeusler compounds are ternary intermetallics with many promising properties such as spin polarization and magnetic shape memory effect. A better understanding of their thermodynamic properties facilitates future design and development. Therefore, standard enthalpies of formation and heat capacities from room temperature to 1500 K of selected Heusler compounds X2YZ (X = Co, Fe, Ni, Pd, Rh, Ru; Y = Co, Cu, Fe, Hf, Mn, Ni, Ti, V, Zr; Z = Al, Ga, In, Si, Ge, Sn) and half-Heusler compounds XYSn (X = Au, Co, Fe, Ir, Ni, Pd, Pt, Rh; Y = Hf, Mn, Ti, Zr) were measured using high temperature direct reaction calorimetry. The measured standard enthalpies of formation were compared with those predicted from ab initio calculations and the extended semiempirical Miedema's model. Trends in standard enthalpy of formation with respect to the periodic classification of elements were discussed. The effect of a fourth element (Co, Cu, Fe, Pd; Ti, V; Al, Ga, In, Si, Ge) on the standard enthalpy of formation of Ni2MnSn was also investigated. Lattice parameters of the compounds with an L21 structure were determined using X-ray powder diffraction analysis. Differential scanning calorimetry was used to determine melting points and phase transformation temperatures. Phase relationships were investigated using scanning electron microscopy with an energy dispersive spectrometer. The isothermal section of the Fe-Sn-Ti ternary system at 873 K was established using equilibrated alloys. Three ternary compounds including the Heusler compound Fe2SnTi were observed. A new ternary compound Fe5Sn9Ti6 was reported and the crystal structure of FeSnTi2 was determined for the first time.
Ph.D. in Mechanical, Materials and Aerospace Engineering
Show less

Title: DEVELOPMENT OF A HIGH ANGULAR RESOLUTION DIFFUSION IMAGING TEMPLATE AND PROBABILISTIC CONNECTIVITY-BASED ATLAS OF THE HUMAN BRAIN
Creator: Varentsova, Anna
Date: 2016, 2016-05
Description: Digital human brain atlases consisting of MRI-based templates and semantic labels delineating different brain regions serve a critical role in...
Show moreDigital human brain atlases consisting of MRI-based templates and semantic labels delineating different brain regions serve a critical role in neuroimaging, mainly facilitating spatial normalization and automated segmentation for the purposes of voxel-wise, region-of-interest, and network analyses. Diffusion MRI templates contain rich information about the microstructure of the brain, however the accuracy of templates constructed based on the diffusion tensor imaging (DTI) model is limited in regions with complex neuronal microarchitecture. High angular resolution diffusion imaging (HARDI) overcomes limitations of the DTI model and is capable of resolving intravoxel heterogeneity. In this work a method to develop artifact-free HARDI template of the human brain from low angular resolution data is presented. Existing white matter (WM) atlases have been generated either based on anatomical landmarks, thus mixing tracts with substantially different roles, or using DTI tractography, which fails in regions with crossing fibers. Connectivity-based atlases developed using HARDI templates and probabilistic tractography have potential to identify functionally distinct subregions of the brain. This work presents connectivity-based atlas of human brain WM created using HARDI template in ICBM-152 space and a set of FreeSurfer grey matter labels.
Ph.D. in Physics, May 2016
Show less

Title: Screech Tones of Supersonic Jets from Bevelled Rectangular Nozzles
Creator: Tam, Ckw, Shen, H., Raman, G.
Date: 1997-07
Publisher: American Inst Aeronaut Astronaut
Description: It is known experimentally that an imperfectly expanded rectangular jet from a thin-lip convergent nozzle emits only a single dominant screech...
Show moreIt is known experimentally that an imperfectly expanded rectangular jet from a thin-lip convergent nozzle emits only a single dominant screech tone. The frequency of the screech tone decreases continuously with an increase in jet Mach number. However, for a supersonic jet issued from a bevelled nozzle or a convergent-divergent nozzle with straight side walls, the shock cell structure and the screech frequency pattern are fairly complicated and have not been predicted before. It is shown that the shock cell structures of these jets can be decomposed into waveguide modes of the jet flow. The screech frequencies are related to the higher-order waveguide modes following the weakest link screech tone theory. The measured screech frequencies are found to compare web with the predicted screech frequency curves.
Show less

Title: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry (sequence unknown), IPRO 333 - Deliverables: IPRO 333 Midterm Presentation F09
Creator: Bonesz, Andrew, Clark, Howard, Douglas, Carlie, Gajdorus, Michael, Gottschall, Keenan, Hendricks, Rachel, Kimball, Clayton, Linares, Jared, Marks, Paul, Mellom, James, Oblenida, Cindy, Pop, Sabina, Stelcel, Carl, Young, Jeremy, Zhou, Raymond
Date: 2009-12
Description: The primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the...
Show moreThe primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the resources of the Museum of Science and Industry (MSI) in Chicago. This partnership endeavors to help the museum's Fabrication Laboratory (Fab Lab) maximize its potential as a resource for museum guests, young and old, as well as for IIT students, staff, and faculty.
Sponsorship: Museum of Science and Industry. Steven Willis- Director, Fabrication Lab
Deliverables for IPRO 333: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry for the fall 2009 semester
Show less

Title: Gerry-meandering: An Assessment of the Congressional District Model of Depository Allocation (preprint): AhrensGriffinedrev2
Creator: Ahrens, Aric G., Griffin, Luke A.
Date: 2003-06
Description: The preprint of a published article dealing with the effect of allocating Federal Depositories by Congressional district. Conclusions drawn...
Show moreThe preprint of a published article dealing with the effect of allocating Federal Depositories by Congressional district. Conclusions drawn include the fact that due to redistricting that occurs after each decennial census, over time some districts may have within their boundaries a greater number than the two depositories that Congressional district allocation was intended to produce. Likewise, over time shifting boundaries of districts have created districts that have no depositories whatsoever.
Show less

Title: EXPERIMENTAL STUDY, TIME-RESOLVED OBSERVATION, AND ANALYSIS OF NANOSECOND LASER ABLATION AND LASER-INDUCED PLASMA
Creator: Zhou, Yun
Date: 2013, 2013-05
Description: For lasers, there exist many current and potential competitive applications in the areas of manufacturing, materials processing, and so on....
Show moreFor lasers, there exist many current and potential competitive applications in the areas of manufacturing, materials processing, and so on. Nanosecond (ns)-pulsed lasers are often seen in these applications. This dissertation presents the experimental study, time-resolved observation and analysis of nanosecond laser ablation and laser-induced plasma due to ablation, and the analysis is based on physics-based numerical models. Specifically, the following topics have been studied: (1). Plasma induced by ablation using long-duration nanosecond laser pulse Plasma is often produced in laser-material interactions, and may play an important role in many laser-based or laser-assisted technologies, such as laser shock peening (LSP), laser micromachining (through the laser ablation process), laser-induced breakdown spectroscopy (LIBS), and laser propulsion, etc. However, despite the previous work in the literature, the study is still limited for the plasma induced by the ablation process using long nanosecond laser pulses (with durations on the order of ~100 ns). In this dissertation, investigations have been performed on this kind of plasma through fast photography (imaging) and emission spectroscopy techniques, and the experimental results have been analyzed using physics-based computational models. Based on the investigations, the following major interesting findings have been obtained under the investigated conditions: (i) Two high radiation intensity regions are observed in the plasma, and one of them disappears soon after laser pulse ends. The research work shows that this phenomenon is related to the vaporization process from the target surface and the confinement effect of the ambient air. (ii) Laser-induced plasma xvii backward growth phenomenon occurs for target ablation using 100-ns laser pulses, but not for that using 200-ns pulses. The investigation shows that the underlying mechanism is the backward growth of the boundary of the high temperature region without actual backward motion of vapor material. (iii) Under the studied conditions, the core region of the plasma (~100 μm above the laser-ablated target) has relatively low temperatures as compared to some other regions of the plasma, which contradicts the common intuition. (2). Semiconductor ablation utilizing infrared (IR) nanosecond laser pulses Semiconductor micromachining through laser ablation may have the advantages of high spatial resolution, high processing efficiency, good flexibility, and no tool wear. However, most of the prior investigations in the literature on ns laser ablation of semiconductors often employ lasers at the ultraviolet (UV) or visible wavelength. The work using IR ns lasers is limited, but IR ns lasers may often have lower cost and require less external energy consumption to produce the same average laser power output. In this dissertation, the ablation of semiconductors using IR ns lasers has been studied through time-resolved observations (fast photography) and the results have been analyzed utilizing physics-based numerical models. The research work shows that the ablation mechanism under the studied conditions is the surface vaporization process during the early stage followed by the subsequent liquid ejection process that occurs at a later time. The research work and analysis shows that the underlying mechanism for the observed liquid ejection should be due to the spatial gradient of the pressure exerted on the target surface, instead of phase explosion. (3). Laser-induced backside ablation (LIBA) of sapphire with IR ns laser pulses xviii LIBA may potentially provide a good solution for high-quality and highefficiency micromachining of wide-band-gap dielectrics (WBGD). However, the prior work on LIBA of sapphire (which is a very important WBGD material) using low-cost IR ns lasers has been rarely reported. This kind of work has been carried out in this dissertation, and the investigation shows that under the studied conditions LIBA can produce very high material removal efficiency and reasonably good quality of machining without obvious chemical contamination coming from the employed backing layer. The ablation rate and damage threshold are measured under different laser parameters, and the research work may provide useful information for the applications of LIBA in practical areas using IR ns lasers that may often have relatively lower cost than UV or visible ns lasers.
PH.D in Mechanical and Aerospace Engineering, May 2013
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of