Search results

Title: DYNAMICS OF A THREE-DIMENSIONAL FOUR-BAR LINKAGE SUBJECT TO RANDOM EXTERNAL FORCING
Creator: Lytell, Mark R.
Date: 2011-11-15, 2011-12
Description: This thesis explores the dynamics of a three-dimensional four-bar mechanical linkage subject to random external forcing. The Lagrangian...
Show moreThis thesis explores the dynamics of a three-dimensional four-bar mechanical linkage subject to random external forcing. The Lagrangian formulation of the equations of motion are index-3 stochastic di erential-algebraic equations (SDAE) that describe the time evolution of the sample paths of the generalized coordinates, velocities, and Lagrange multipliers as stochastic processes. We solve the SDAEs using two di erent approaches: inverse dynamics, Case Study 1, via independent, successive solution of the nonlinear equations for each kinematic variable, where the time evolution of one generalized coordinate is prescribed; and direct dynamics, Case Study 2, via direct solution of the SDAEs in the index-1 formulation, using fourth-order stochastic backward di erentiation formula (BDF) with modi ed Newton iteration and position and velocity stabilization (Ascher and Petzold [2]), where the (deterministic) input driving torque is prescribed. For the particular application of a three-dimensional swing gate security system, we conduct numerical experiments for both approaches. In Case Study 1, we simulate the random external forcing as a Gaussian wind speed process that applies stochastic wind drag onto the gate. The kinematic variables are deterministic, while the required input driving torque is a stochastic process. In Case Study 2, we apply the external forcing as a resistive torque with additive Gaussian noise modeling the wind drag; the kinematic variables are stochastic processes. For both cases, we apply four mean wind speeds: 0 mph (deterministic only), 10 mph, 20 mph, and 30 mph, from which we compute the deterministic solution and three stochastic sample paths for each stochastic process. The overall conclusions are that direct solution is possible for inverse dynamics, that the solution of index-1 SDAEs in multibody dynamics is tractable since the mass matrix is symmetric and positive de nite, and that the deterministic solution is the expectation of the sample paths.
M.S. in Applied Mathematics, December 2011
Show less

Title: Green Building Design Concept & Integration (sequence unknown), IPRO 335 - Deliverables: IPRO 335 Project Plan F09
Creator: Avanessian, Aris, Banda, Justine, Bergerson, Joshua, Burke, Jeffrey, Christo, Robert, Dexter, Eric, Kim, Kibum, Mey, Andrew, Okunaga, Jonathan, Razeq, Ali, Schaefer, Jacqueline, Thovar Leon, Adrian, Um, Hye
Date: 2009-12
Description: The scope of this IPRO project spans structural, architectural, foundation, HVAC, lighting and electric system designs, as well as building...
Show moreThe scope of this IPRO project spans structural, architectural, foundation, HVAC, lighting and electric system designs, as well as building cost estimating and professional ethics. The IPRO team will become informed about and apply principles associated with green design concepts, energy sustainability, post occupancy comfort, acoustic design issues, smart building concepts, health issues (abatement of mold- and allergy-causing agents), and safety considerations.
Deliverables for IPRO 335: Green Building Design Concept & Integration for the fall 2009 semester
Show less

Title: GENOME ANNOTATION AND PHYLOGENETIC ANALYSIS OF 27 SALMONELLA STRAINS BASED ON BIOINFORMATIC ANALYSIS OF RESPECTIVE GENOMES AND THREE GENES
Creator: Li, Xinyue
Date: 2013-04-15, 2013-05
Description: Salmonella is the most common food-borne bacterial infectious pathogen worldwide. Different serovars of Salmonella are capable of infecting...
Show moreSalmonella is the most common food-borne bacterial infectious pathogen worldwide. Different serovars of Salmonella are capable of infecting different kinds of hosts, such as humans, mice, pigs, chickens, and can also lead to different syndromes, such as enterica fever, enterocolitis and diarrhea, bacteremia and chronic asymptomatic carriage. Although Salmonella strains are quite diverse, strains within the same serovar usually infect the same host and cause similar symptoms. Thus, it is important, especially in food-borne disease outbreaks, to know which type of Salmonella is present. The current method of typing Salmonella is based on the Kaufmann-White scheme and MLEE, which are laborious and expensive. Although the reliability of this method has not been previously verified, the evolutionary relationship reflected by phylogenetic trees can be a possible alternative to the way of typing the Salmonella strains; this method would be less labor intensive and more economical. MLST is considered as a “gold standard” of typing for many species includes Salmonella. And genome sequence, which certainly reflects the evolutionary relationship of strains, is the most ideal data to construct a more reliable phylogenetic tree; however, genome sequencing is also a laborious and expensive process. Thus, conserved and ubiquitous gene data, which can be accessed with little effort, are generally used to minimize cost. Using16s rRNA is the most widely used method. In this study, 27 Salmonella genome sequences are annotated with RAST, and phylogenetic trees are constructed using three software, (phylip3.69, MEGA5.1, and CVTree). And MLST is also used to construct phylogenetic tree in this study, and the result is used to be compared with genome phylogenetic tree to find a more reliable reference tree. Although Neighbor-Joining method is the only algorithms x available in CVTree, phylip3.69 and MEGA5.1 are capable to use three separate algorithms(Maximum Parsimony, Maximum Likelihood, and Neighbor-Joining, respectively). Finally, these trees are compared in an effort to find a good alternative to replace the reference phylogenetic tree. In this study, it was determined that the groEL gene would be the best replacement.
M.S. Biological and Chemical Sciences, May 2013
Show less

Title: Reclaiming the Lake: Ecological Infrastructure as a Catalyst for Change
Creator: Searle, Gideon
Date: 2010-07-30

Title: Method of Making Enriched Radioisotopes by Cation Fixation
Creator: Feng, Paul Y.
Date: 4/23/2009, 1965-01-26
Description: Sponsorship: IIT Research Institute
United States Patent

Title: A test of an evaporative condenser to determine the coefficient of heat transmission
Creator: Evans, Robert T.
Date: 2009, 1909
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testofevaporativ00evan
Thesis (B.S.)--Armour Institute of Technology

Title: Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 Ethics F08
Creator: Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
Date: 2008, 2008-12
Description: The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less

Title: Electrical Brush
Creator: Forster, George A., Sump, Cord H.
Date: 1960-06-07
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Bearing Composition
Creator: Sump, Cord H., Swartz, Carl E.
Date: 1959-06-02
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: A study of motor cycle engine characteristics
Creator: Ott, C. L., Pimstein, S.
Date: 2009, 1916
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofmotorcycl00ottc
Thesis (B.S.)--Armour Institute of Technology

Title: Devices that Assist Blind & Visually-Impaired Individuals in Swimming and Other Exercise Activities (sequence unknown), IPRO 310 - Deliverables: IPRO 310 IPRO Day Presentation F09
Creator: Dykeman, Kimberly, Healton, Michaela, Lipman, Timothy, Ludwig, Ross, Park, Jay, Reilly, Jeffrey, Sarkar, Smita, Sirk, Phillip, Toro, Branden
Date: 2009-12
Description: The objective is to develop, test, and implement assistive technology with the community that promotes safety and improves independence of...
Show moreThe objective is to develop, test, and implement assistive technology with the community that promotes safety and improves independence of blind and visually impaired (BVI) swimmers.
Sponsorship: Chicago Lighthouse for the Blind & Visually-Impaired. Notre Dame University
Deliverables for IPRO 310:Devices that Assist Blind & Visually-Impaired Individuals in Swimming and Other Exercise Activities for the fall 2009 semester.
Show less

Title: Electromagnetic Transducer Head
Creator: Camras, Marvin
Date: 1951-01-30
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Neutron Spectrometer
Creator: Reiffel, Leonard
Date: 1962-04-10
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: SEARCHING ENCRYPTED CLOUD DATA
Creator: Urs, Karthik Mahendra Raje
Date: 2011-05-04, 2011-05
Description: The major setback of the cloud is its inability to induce strong trust in its users. For us, the users of the cloud, to be sure of the...
Show moreThe major setback of the cloud is its inability to induce strong trust in its users. For us, the users of the cloud, to be sure of the security of the data from other users, we have to trust cloud. In most of the cases, say if the data were to be hosted on Microsoft’s servers, we can trust Microsoft in its policies to prevent unauthorized access to it from other users (via hacking). But, the issue that is haunting the cloud is this - ”How can we be sure that our data is safe from Cloud service providers themselves?” The most intuitive solution for the cloud service provider to gain trust is to insist we encrypt our data. That is an irrefutable act of honesty from the cloud. But this has some obvious setbacks, few of which would negate the very advantages of cloud. One such issue that dictates the scope of this thesis is this - Typical cryptographic algorithms are not amenable to search. Now, if we were to implement a search engine on cloud (which has the data encrypted), the native search techniques have to be extended on to the cryptographic domain so that the cloud can perform the tasks of a search engine. This thesis explores the solutions to the above mentioned problem of searching over encrypted data, specifically using a secure pre-processed index approach. Though significant ideas have been proposed in the area, there is no concrete implementation to analyze if it can be used in the industrial setting. The main goal of the thesis is to implement a system which supports a variety of searching techniques. We make use of Amazon EC2 and test out the designed systems to evaluate how feasible they are for immediate consumption by the industry.
M.S. in Computer Engineering, May 2011
Show less

Title: Increased Ethanol Production by Genetic Engineering of Microorganisms to Express Hemoglobin
Creator: Sanny, Tony, Stark, Benjamin C.
Date: 2016-04-15, 2016-04-12
Description: The present disclosure describes novel bacterial strains which express a pyruvate decarboxylase gene and at least one alcohol dehydrogenase...
Show moreThe present disclosure describes novel bacterial strains which express a pyruvate decarboxylase gene and at least one alcohol dehydrogenase gene from a bacteria of the genus Zymomonas and also express a hemoglobin gene from a bacteria of the genus Vitreoscilla. The pressent disclosure further describes methods for producing fermentation products with a microorganism which expresses a pyruvate decarboxylase gene and at least one alcohol dehydrogenase gene from a bacteria of the genus Zymomonas and also express a hemoglobin gene from a bacteria of the genus Vitreoscilla. Further the present disclosure describes methods for increasing production of a fermentation product comprising genetically engineering a microorganism which expresses a xylose isomerase gene to also express a hemoglobin gene from a bacteria of the genus Vitreoscilla.
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: CONTROLLER DESIGN AND DISTRIBUTED CONTROL WITHIN MULTI-AGENT SYSTEMS
Creator: Shao, Quan Min
Date: 2013, 2013-12
Description: None
PH.D in Chemical and Biological Engineering, December 2013

Title: Screech Tones from Rectangular Jets with Spanwise Oblique Shock-cell Structures
Creator: Raman, G.
Date: 1997-01-10
Publisher: Cambridge Univ Press
Description: Understanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft...
Show moreUnderstanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft structures. Although the connection between shock-cell spacing and screech frequency is well understood, the relation between non-uniformities in the shock-cell structures and the resulting amplitude, mode, and steadiness of screech have remained unexplored. This paper addresses the above issues by intentionally producing spanwise (larger nozzle dimension) variations in the shock-cell structures and studying the resulting spanwise screech mode. The spanwise-oblique shock-cell structures were produced using imperfectly expanded convergent-divergent rectangular nozzles (aspect ratio = 5) with non-uniform exit geometries. Three geometries were studied: (a) a nozzle with a spanwise uniform edge, (b) a nozzle with a spanwise oblique (single-bevelled) edge, and (c) a nozzle that had two spanwise oblique (double-bevelled) cuts to form an arrowhead-shaped nozzle. For all nozzles considered, the screech mode was antisymmetric in the transverse (smaller nozzle dimension) direction allowing focus on changes in the spanwise direction. Three types of spanwise modes were observed: symmetric (I), antisymmetric (II), and oblique (III), The following significant results emerged: (i) for all cases the screech mode corresponds with the spanwise shock-cell structure, (ii) when multiple screech modes are present, the technique presented here makes it possible to distinguish between coexisting and mutually exclusive modes, (iii) the strength of shocks 3 and 4 influences the screech source amplitude and determines whether screech is unsteady. The results presented here offer hope for a better understanding of screech and for tailoring shock-containing jets to minimize fatigue failure of aircraft components.
Show less

Title: VALIDATION OF BAKING TO INACTIVATE SALMONELLA IN HIGH-PROTEIN AND HIGH-FAT MODEL FOODS
Creator: Wang, Wenqian
Date: 2017, 2017-07
Description: Baked food products, such as dry pet foods, undergo changes of temperature and water activity (aw) during forced hot air processes. As one of...
Show moreBaked food products, such as dry pet foods, undergo changes of temperature and water activity (aw) during forced hot air processes. As one of the most thermal resistant microorganisms in low-moisture/intermediate moisture foods, Salmonella’s thermal inactivation kinetics during these processes is not well understood and difficult to predict. The objective of this study was to evaluate thermal inactivation kinetics of Salmonella enterica serovar Agona 447967 in model high-protein (HP) and high-fat (HF) multiple-component foods baked in a laboratory-scale oven, as influenced by oven temperature and relative humidity (RH). Model high-protein and high-fat foods, formulated with wheat flour, soy protein and soy oil, were inoculated with Salmonella Agona to a level of ~9 log CFU/g, and mixed to form a homogenous dough. Dough samples (57 mm diameter x 6 mm thick) were baked (3 samples per dwell time, 6 dwell times per condition) in a lab-scale oven at 120°C (10% RH) and 85°C (20%, 35% RH, 50% RH), respectively. Temperature and aw were measured at the surface and geometric center of the product during baking. Processed samples were collected in sterile bags and immediately cooled in an ice-water bath. Salmonella was enumerated on trypticase soy agar supplemented with yeast extract and incubated at 37°C for 24 h. Similar reductions (p>0.05) of 5.12-, 5.11-, 4.55-, and 4.78-log CFU/g were achieved after 40 min at 120°C/10% RH, 90 min at 85°C/20% RH, 50 min at 85°C/35% RH, 8 min at 85°C/50% RH, respectively, in the high-protein model food. Similar results were achieved in the high-fat matrix. The aw at the geometric center of the product (initially at aw =0.98) did not change appreciably during baking, while the aw at the product surface, the location of least lethality, decreased significantly (p<0.05) during baking; the decreases were more pronounced at lower oven RH. The results indicate that thermal inactivation of Salmonella Agona was driven by temperature and relative humidity in the oven. Higher temperature and higher relative humidity level led to greater Salmonella inactivation.
M.S. in Food Process Engineering, July 2017
Show less

Title: NUMERICAL SIMULATION OF AIR FLOW OVER A THIN OIL FILM
Creator: Dziedzic, William M.
Date: 2014, 2014-12
Description: Turbulent boundary layer flow research uses oil film and oil drop interferometry to measure wall shear stress of air flows. Oil film...
Show moreTurbulent boundary layer flow research uses oil film and oil drop interferometry to measure wall shear stress of air flows. Oil film interferometry determines the rate oil decreases on a surface as the function of the shear stress magnitude. Current traditional methods have proven to be accurate but the solution is obtained by assuming a linear height distribution [3]. This assumes a constant shear stress along the oil drop and assures that there is no effect of the oil drop on the incoming boundary layer [3]. This effect maintains the continuity of shear stress at the air/oil interface, but the stream-wise velocity at the interface is discontinuous. It is thought that these approximations contain small errors but this has not been verified for zero pressure gradient turbulent boundary layer [3]. A computational fluid dynamics numerical study was performed to simulate the two-dimensional (2D) and three-dimensional (3D) effects of air flow over an oil drop and the drop’s movement across the channel surface.
M.S. in Mechanical and Aerospace Engineering, December 2014
Show less

Title: Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King (sequence unknown), IPRO 314 - Deliverables: IPRO 314 Final Report F09
Creator: O’leary, Kevin, Petty, Sonya, Qi, Tianshu, Tan, Sophia, Noor, Nashrah, Schleich, Kenneth, Akhtar, Ayesha, Cheng, Eric, Kim, James, Parker, Joseph, Saha, Sougata
Date: 2009-12
Description: The objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Spo...
Show moreThe objective of this IPRO is to help the students of Gage Park H.S. bring their vision of a memorial to a historical event into existence.
Sponsorship: Gage Park High School
Deliverables for IPRO 314: Interactive Urban Landmark Kiosks for Memorial Walk of Martin Luther King for the fall 2009 semester.
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of

Rights