Search results

Title: The Rotten IPRO (Semester Unknown) IPRO 312: TheRottenIPRO312MidTermPresentationSp09
Creator: Cargill, Matthew, Coad, Matthew, Dominski, John, Gulling, Richard, Karpuzi, Isida, Morton, Stacy, Nielsen, Lisa, Oblenida, Cindy, Olichwier, David, Rossi, James, Ryan, Emily, Szpiech, Paulina
Date: 2009, 2009-05
Description: Our team, IPRO 312: The Rotten IPRO’s goal is to determine the best method on how to recycle organic waste generated by the university....
Show moreOur team, IPRO 312: The Rotten IPRO’s goal is to determine the best method on how to recycle organic waste generated by the university. Research and analysis will inform us on whether initiating a composting facility on campus is feasible or not. The opening of a composting facility can reduce the university's environmental impact. Furthermore, IIT can serve as a model to expand composting across the city of Chicago.
Deliverables
Show less

Title: Implementing The Plant: Chicago’s First Vertical Farm (Semester Unknown) IPRO 336: ImplementingThePlantChicagoIPRO336MidTermPresentationSp11
Creator: Speroff, Philip, Skaar, Angela, Schmidt, Michael, Plunkett, Joel, Mocny, William, Lockom, Frank, Handzel, Katarzyna, Speroff, Philip, Schmidt, Michael, Lockom, Frank, Xiao, Yao, Viramontes, Carlos, Sansone, Nic, Millham, Joseph, Chavez, Laurel, Palau, Mariana, Ostasz, Raluca, Liu, Andrew, Kenney, Kaycee, Hallak, Joseph, Bugnar, Ioana
Date: 2011, 2011-05
Description: There are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it...
Show moreThere are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it-yourself greenhouse plans are usually for structures with wood or metal pipe frames. Plastic pipe materials generally are inadequate to meet snow and wind load requirements. Frames can be covered with glass, rigid fiberglass, rigid double-wall plastics, or plastic film. All have advantages and disadvantages. Each of these materials should be considered--it pays to shop around for ideas.
Deliverables
Show less

Title: Planning the 21st Century Urban Farm: From High Rise to Neighborhood (sequence unknown), IPRO 336 - Deliverables: IPRO 336 IPRO Day Presentation F09
Creator: Bhatti, Talha, Binet, Adrien, Bredau, Jason, Chen, Emily, Davis, Jacob, Gaonkar, Gaurav, Garcia, Raul, Guerrero, Fernando, Gulling, Richard, Kagehiro, Michael, Moshfeghian, Elnaz, Nunez-gimeno, Jose, Phillips, Zachary, Plumb, Isaac, Ryan, Emily, Skaggs, Jake, Sobon, Konrad, Valmores, Travis
Date: 2009-12
Description: The purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. The growing problems regarding the...
Show moreThe purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. The growing problems regarding the traditional methods of agriculture, and the rate of growth of the world population, the team plans to design a method to grow food more efficiently and economically in urban areas. The team is looking at large, industrial warehouse-type buildings that have outlived their primary use, and creating a plan that utilizes these buildings to grow enough food for the surrounding communities.
Sponsorship: John Edel of Bubbly Dynamics, LLC
Deliverables for IPRO 336: Planning the 21st Century Urban Farm: From High Rise to Neighborhood for the fall 2009 semester
Show less

Title: Implementing The Plant: Chicago’s First Vertical Farm (Semester Unknown) IPRO 336: ImplementingThePlantChicagoIPRO336ProjectPlanSp11
Creator: Speroff, Philip, Skaar, Angela, Schmidt, Michael, Plunkett, Joel, Mocny, William, Lockom, Frank, Handzel, Katarzyna, Speroff, Philip, Schmidt, Michael, Lockom, Frank, Xiao, Yao, Viramontes, Carlos, Sansone, Nic, Millham, Joseph, Chavez, Laurel, Palau, Mariana, Ostasz, Raluca, Liu, Andrew, Kenney, Kaycee, Hallak, Joseph, Bugnar, Ioana
Date: 2011, 2011-05
Description: There are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it...
Show moreThere are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it-yourself greenhouse plans are usually for structures with wood or metal pipe frames. Plastic pipe materials generally are inadequate to meet snow and wind load requirements. Frames can be covered with glass, rigid fiberglass, rigid double-wall plastics, or plastic film. All have advantages and disadvantages. Each of these materials should be considered--it pays to shop around for ideas.
Deliverables
Show less

Title: Implementing The Plant: Chicago’s First Vertical Farm (Semester Unknown) IPRO 336: ImplementingThePlantChicagoIPRO336Poster1Sp11
Creator: Speroff, Philip, Skaar, Angela, Schmidt, Michael, Plunkett, Joel, Mocny, William, Lockom, Frank, Handzel, Katarzyna, Speroff, Philip, Schmidt, Michael, Lockom, Frank, Xiao, Yao, Viramontes, Carlos, Sansone, Nic, Millham, Joseph, Chavez, Laurel, Palau, Mariana, Ostasz, Raluca, Liu, Andrew, Kenney, Kaycee, Hallak, Joseph, Bugnar, Ioana
Date: 2011, 2011-05
Description: There are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it...
Show moreThere are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it-yourself greenhouse plans are usually for structures with wood or metal pipe frames. Plastic pipe materials generally are inadequate to meet snow and wind load requirements. Frames can be covered with glass, rigid fiberglass, rigid double-wall plastics, or plastic film. All have advantages and disadvantages. Each of these materials should be considered--it pays to shop around for ideas.
Deliverables
Show less

Title: Implementing The Plant: Chicago’s First Vertical Farm (Semester Unknown) IPRO 336: ImplementingThePlantChicagoIPRO336FinalReportSp11
Creator: Speroff, Philip, Skaar, Angela, Schmidt, Michael, Plunkett, Joel, Mocny, William, Lockom, Frank, Handzel, Katarzyna, Speroff, Philip, Schmidt, Michael, Lockom, Frank, Xiao, Yao, Viramontes, Carlos, Sansone, Nic, Millham, Joseph, Chavez, Laurel, Palau, Mariana, Ostasz, Raluca, Liu, Andrew, Kenney, Kaycee, Hallak, Joseph, Bugnar, Ioana
Date: 2011, 2011-05
Description: There are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it...
Show moreThere are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it-yourself greenhouse plans are usually for structures with wood or metal pipe frames. Plastic pipe materials generally are inadequate to meet snow and wind load requirements. Frames can be covered with glass, rigid fiberglass, rigid double-wall plastics, or plastic film. All have advantages and disadvantages. Each of these materials should be considered--it pays to shop around for ideas.
Deliverables
Show less

Title: The 21st Century Farm (Semester Unknown) IPRO 336: PlanningThe21stCenturyIPRO336ProjectPlanF09
Creator: Andrews, Preston, Bhatti, Talha, Binet, Adrien, Bredau, Jason, Chen, Emily, Davis, Jacob, Gaonkar, Gaurav, Garcia, Raul, Guerrero, Fernando, Gulling, Richard, Kagehiro, Michael, Moshfeghian, Elnaz, Maria Nunez-gimeno, Jose, Phillips, Zachary, Plumb, Isaac, Ryan, Emily, Skaggs, Jake, Sobon, Konrad, Valmores, Travis
Date: 2009, 2009-12
Description: The purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. We recognize the growing problems regarding...
Show moreThe purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. We recognize the growing problems regarding the traditional methods of agriculture, and given the rate of growth of the world population, we propose a plan to grow food more efficiently and economically in urban areas.
Sponsorship: John Edel, Bubbly Dynamics LLC
Deliverables
Show less

Title: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry (sequence unknown), IPRO 333 - Deliverables
Creator: Bonesz, Andrew, Clark, Howard, Douglas, Carlie, Gajdorus, Michael, Gottschall, Keenan, Hendricks, Rachel, Kimball, Clayton, Linares, Jared, Marks, Paul, Mellom, James, Oblenida, Cindy, Pop, Sabina, Stelcel, Carl, Young, Jeremy, Zhou, Raymond
Date: 2009-12
Description: The primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the...
Show moreThe primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the resources of the Museum of Science and Industry (MSI) in Chicago. This partnership endeavors to help the museum's Fabrication Laboratory (Fab Lab) maximize its potential as a resource for museum guests, young and old, as well as for IIT students, staff, and faculty.
Sponsorship: Museum of Science and Industry. Steven Willis- Director, Fabrication Lab
Deliverables for IPRO 333: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry for the fall 2009 semester
Show less

Title: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry (sequence unknown), IPRO 333 - Deliverables: IPRO 333 Final Report F09
Creator: Bonesz, Andrew, Clark, Howard, Douglas, Carlie, Gajdorus, Michael, Gottschall, Keenan, Hendricks, Rachel, Kimball, Clayton, Linares, Jared, Marks, Paul, Mellom, James, Oblenida, Cindy, Pop, Sabina, Stelcel, Carl, Young, Jeremy, Zhou, Raymond
Date: 2009-12
Description: The primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the...
Show moreThe primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the resources of the Museum of Science and Industry (MSI) in Chicago. This partnership endeavors to help the museum's Fabrication Laboratory (Fab Lab) maximize its potential as a resource for museum guests, young and old, as well as for IIT students, staff, and faculty.
Sponsorship: Museum of Science and Industry. Steven Willis- Director, Fabrication Lab
Deliverables for IPRO 333: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry for the fall 2009 semester
Show less

Title: Inflatable Greenhouse (semester?), IPRO 344: Infaltable Greenhouse IPRO 334 Final Report Sp06
Creator: Cervantes, Heidi, Ferraro, Christie, Lucid, Shannon, Teefey, Aaron, Woods, Nathaniel, Bains, Jasmeet, Ching, Neal, Langman, Michael, Mccrory, Reuben, Valdez, Oscar, Wright Iii, James, Bilderback, Matthew, Choi, David, Larson, Jeffrey, Meyer, Chad, Wang, Xiang, Carroll, Daniel, Crandell, Daniel, Lim, Eungjum, Nedrud, Joshua, Wojcik, Michael
Date: 2006-05, 2006-05
Description: The purpose of the Inflatable Greenhouse IPRO was to design an air supported structure that was cheaper than the current greenhouse solution....
Show moreThe purpose of the Inflatable Greenhouse IPRO was to design an air supported structure that was cheaper than the current greenhouse solution. The structural support of current greenhouses creates shadows that prevent an even sunlight exposure for the plants. The other issues we investigated were the cost, size, thermal control, and pest control of current greenhouse designs. The majority of the cost for a traditional greenhouse goes towards the structural support therefore an air supported structure should be significantly cheaper. The basic greenhouse design is oriented towards human occupants and is subsequently quite large. If the greenhouse was instead designed to house the plants already in the ground, just for the months that they needed shelter to grow, the cut back in size would also greatly affect the cost. We also looked into the thermal qualities of greenhouses. The very nature of a greenhouse absorbs and traps the light and heat of the sun. Without a cooling system a greenhouse can overheat and harm the plants within it. The other problem we found with current greenhouses was the pest control solution. Most greenhouses use strong chemicals that require special training for use and safety. Even the “organic” solutions use natural chemicals in concentrations considered toxic. Our goal was to design a greenhouse that would address each of these issues with a cheap and practical solution.
Deliverables for IPRO 334: Inflatable Greenhouse for the Spring 2006 semester
Show less

Title: Building a Community Garden (semester?), IPRO 344: Community Gardening IPRO 344 Abstract S06
Creator: Chojnowski, Joeseph, Clemens, Natalie, Esparza, Saul, Gerges, Shahir, Hernandez, Veronica, Herrera, Stephanie, Hittie, Thomas, Lucid, Shannon, Peck, Edward, Pfau, Sara, Procaccio, Vincenzo, Samuels, Janina, Schaefer, Kristina, Siefkas, Kaylyn, Sweikert, Emma, Winter, Rachael
Date: 2006-07, 2006-07
Description: IPRO 344 investigated methods for safe, low-cost community gardening in the urban setting. Most community gardens within large cities are...
Show moreIPRO 344 investigated methods for safe, low-cost community gardening in the urban setting. Most community gardens within large cities are sited in vacant lots that have been previously built upon. When the structures that once occupied these sites were demolished, the debris filled the basements of the structures, and was then covered by a shallow layer of nutrient poor dirt. The resulting vacant lots pose two problems for community gardening. First, the ground becomes tough and nearly impossible to manually prepare for gardening purposes. Second, the presence of lead and mercury from the paint and other construction materials has been incorporated into the soil, which can be harmful when transferred into plants which are then ingested. Since most community gardens in low-income neighborhoods do provide food, it became the aim of IPRO 344 to inexpensively grow plants which would be safe to eat in an urban community garden.
Deliverables for IPRO 344: Building a Community Garden for the Summer 2006 semester
Show less

Title: The 21st Century Farm (Semester Unknown) IPRO 336: PlanningThe21stCenturyIPRO336FinalPresentationF09
Creator: Andrews, Preston, Bhatti, Talha, Binet, Adrien, Bredau, Jason, Chen, Emily, Davis, Jacob, Gaonkar, Gaurav, Garcia, Raul, Guerrero, Fernando, Gulling, Richard, Kagehiro, Michael, Moshfeghian, Elnaz, Maria Nunez-gimeno, Jose, Phillips, Zachary, Plumb, Isaac, Ryan, Emily, Skaggs, Jake, Sobon, Konrad, Valmores, Travis
Date: 2009, 2009-12
Description: The purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. We recognize the growing problems regarding...
Show moreThe purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. We recognize the growing problems regarding the traditional methods of agriculture, and given the rate of growth of the world population, we propose a plan to grow food more efficiently and economically in urban areas.
Sponsorship: John Edel, Bubbly Dynamics LLC
Deliverables
Show less

Title: The Greenhouse Project (semester?), IPRO 320: Greenhouse Project IPRO 320 Final Report Sp05
Creator: Heischmidt, Eric, Teefey, Aaron, Choi, David, Smith, Noah, Palmisano, Chris, Waliczek, Greg, Carroll, Dan, Chu, Alex, Popielarz, Megan, Harris, L. Justin, Carter, Ed, Bahena, Dennis
Date: 2005-05, 2005-05
Description: The goal of the IPRO 320 (The Greenhouse Project) team is to evaluate, improve, and utilize The Chicago Center for Green Technology’s solar...
Show moreThe goal of the IPRO 320 (The Greenhouse Project) team is to evaluate, improve, and utilize The Chicago Center for Green Technology’s solar greenhouse. The team will monitor the conditions within the greenhouse and use that information to find ways to improve its efficiency and functionality. In addition to making proposals to the Center for Green Technology, the team will implement some of these ideas. Ultimately, the team will plant and grow seedlings within the greenhouse. The vision for this IPRO group is to make the greenhouse fully functional and efficient.
Deliverables for IPRO 320: The Greenhouse Project for the Spring 2005 semester
Show less

Title: The Rotten IPRO (Semester Unknown) IPRO 312: TheRottenIPRO312FinalReportSp09
Creator: Cargill, Matthew, Coad, Matthew, Dominski, John, Gulling, Richard, Karpuzi, Isida, Morton, Stacy, Nielsen, Lisa, Oblenida, Cindy, Olichwier, David, Rossi, James, Ryan, Emily, Szpiech, Paulina
Date: 2009, 2009-05
Description: Our team, IPRO 312: The Rotten IPRO’s goal is to determine the best method on how to recycle organic waste generated by the university....
Show moreOur team, IPRO 312: The Rotten IPRO’s goal is to determine the best method on how to recycle organic waste generated by the university. Research and analysis will inform us on whether initiating a composting facility on campus is feasible or not. The opening of a composting facility can reduce the university's environmental impact. Furthermore, IIT can serve as a model to expand composting across the city of Chicago.
Deliverables
Show less

Title: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry (sequence unknown), IPRO 333 - Deliverables: IPRO 333 Brochure F09
Creator: Bonesz, Andrew, Clark, Howard, Douglas, Carlie, Gajdorus, Michael, Gottschall, Keenan, Hendricks, Rachel, Kimball, Clayton, Linares, Jared, Marks, Paul, Mellom, James, Oblenida, Cindy, Pop, Sabina, Stelcel, Carl, Young, Jeremy, Zhou, Raymond
Date: 2009-12
Description: The primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the...
Show moreThe primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the resources of the Museum of Science and Industry (MSI) in Chicago. This partnership endeavors to help the museum's Fabrication Laboratory (Fab Lab) maximize its potential as a resource for museum guests, young and old, as well as for IIT students, staff, and faculty.
Sponsorship: Museum of Science and Industry. Steven Willis- Director, Fabrication Lab
Deliverables for IPRO 333: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry for the fall 2009 semester
Show less

Title: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry (sequence unknown), IPRO 333 - Deliverables: IPRO 333 Poster F09
Creator: Bonesz, Andrew, Clark, Howard, Douglas, Carlie, Gajdorus, Michael, Gottschall, Keenan, Hendricks, Rachel, Kimball, Clayton, Linares, Jared, Marks, Paul, Mellom, James, Oblenida, Cindy, Pop, Sabina, Stelcel, Carl, Young, Jeremy, Zhou, Raymond
Date: 2009-12
Description: The primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the...
Show moreThe primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the resources of the Museum of Science and Industry (MSI) in Chicago. This partnership endeavors to help the museum's Fabrication Laboratory (Fab Lab) maximize its potential as a resource for museum guests, young and old, as well as for IIT students, staff, and faculty.
Sponsorship: Museum of Science and Industry. Steven Willis- Director, Fabrication Lab
Deliverables for IPRO 333: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry for the fall 2009 semester
Show less

Title: The 21st Century Farm (Semester Unknown) IPRO 336: PlanningThe21stCenturyIPRO336FinalReportF09
Creator: Andrews, Preston, Bhatti, Talha, Binet, Adrien, Bredau, Jason, Chen, Emily, Davis, Jacob, Gaonkar, Gaurav, Garcia, Raul, Guerrero, Fernando, Gulling, Richard, Kagehiro, Michael, Moshfeghian, Elnaz, Maria Nunez-gimeno, Jose, Phillips, Zachary, Plumb, Isaac, Ryan, Emily, Skaggs, Jake, Sobon, Konrad, Valmores, Travis
Date: 2009, 2009-12
Description: The purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. We recognize the growing problems regarding...
Show moreThe purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. We recognize the growing problems regarding the traditional methods of agriculture, and given the rate of growth of the world population, we propose a plan to grow food more efficiently and economically in urban areas.
Sponsorship: John Edel, Bubbly Dynamics LLC
Deliverables
Show less

Title: Building a Community Garden (semester?), IPRO 344
Creator: Chojnowski, Joeseph, Clemens, Natalie, Esparza, Saul, Gerges, Shahir, Hernandez, Veronica, Herrera, Stephanie, Hittie, Thomas, Lucid, Shannon, Peck, Edward, Pfau, Sara, Procaccio, Vincenzo, Samuels, Janina, Schaefer, Kristina, Siefkas, Kaylyn, Sweikert, Emma, Winter, Rachael
Date: 2006-07, 2006-07
Description: IPRO 344 investigated methods for safe, low-cost community gardening in the urban setting. Most community gardens within large cities are...
Show moreIPRO 344 investigated methods for safe, low-cost community gardening in the urban setting. Most community gardens within large cities are sited in vacant lots that have been previously built upon. When the structures that once occupied these sites were demolished, the debris filled the basements of the structures, and was then covered by a shallow layer of nutrient poor dirt. The resulting vacant lots pose two problems for community gardening. First, the ground becomes tough and nearly impossible to manually prepare for gardening purposes. Second, the presence of lead and mercury from the paint and other construction materials has been incorporated into the soil, which can be harmful when transferred into plants which are then ingested. Since most community gardens in low-income neighborhoods do provide food, it became the aim of IPRO 344 to inexpensively grow plants which would be safe to eat in an urban community garden.
Deliverables for IPRO 344: Building a Community Garden for the Summer 2006 semester
Show less

Title: The Greenhouse Project (semester?), IPRO 320: Greenhouse Project IPRO 320 Project Plan Sp05
Creator: Heischmidt, Eric, Teefey, Aaron, Choi, David, Smith, Noah, Palmisano, Chris, Waliczek, Greg, Carroll, Dan, Chu, Alex, Popielarz, Megan, Harris, L. Justin, Carter, Ed, Bahena, Dennis
Date: 2005-05, 2005-05
Description: The goal of the IPRO 320 (The Greenhouse Project) team is to evaluate, improve, and utilize The Chicago Center for Green Technology’s solar...
Show moreThe goal of the IPRO 320 (The Greenhouse Project) team is to evaluate, improve, and utilize The Chicago Center for Green Technology’s solar greenhouse. The team will monitor the conditions within the greenhouse and use that information to find ways to improve its efficiency and functionality. In addition to making proposals to the Center for Green Technology, the team will implement some of these ideas. Ultimately, the team will plant and grow seedlings within the greenhouse. The vision for this IPRO group is to make the greenhouse fully functional and efficient.
Deliverables for IPRO 320: The Greenhouse Project for the Spring 2005 semester
Show less

Title: Implementing The Plant: Chicago’s First Vertical Farm (Semester Unknown) IPRO 336
Creator: Speroff, Philip, Skaar, Angela, Schmidt, Michael, Plunkett, Joel, Mocny, William, Lockom, Frank, Handzel, Katarzyna, Speroff, Philip, Schmidt, Michael, Lockom, Frank, Xiao, Yao, Viramontes, Carlos, Sansone, Nic, Millham, Joseph, Chavez, Laurel, Palau, Mariana, Ostasz, Raluca, Liu, Andrew, Kenney, Kaycee, Hallak, Joseph, Bugnar, Ioana
Date: 2011, 2011-05
Description: There are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it...
Show moreThere are several types of framing that can be used on a greenhouse. The frames are made of wood, galvanized steel, or aluminum. Build-it-yourself greenhouse plans are usually for structures with wood or metal pipe frames. Plastic pipe materials generally are inadequate to meet snow and wind load requirements. Frames can be covered with glass, rigid fiberglass, rigid double-wall plastics, or plastic film. All have advantages and disadvantages. Each of these materials should be considered--it pays to shop around for ideas.
Deliverables
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Department

Subject

Creator

Rights