Search results

Title: North Carolina State University Rapid Transit Center
Creator: Scott, Phillip
Date: 2012-05, 2012-05
Description: North Carolina State University is one of the leading land grant institutions and public research universities in the country. However, its...
Show moreNorth Carolina State University is one of the leading land grant institutions and public research universities in the country. However, its rapidly growing size and required travel distance in-between campuses necessitate drastically improved transit connections. Current plans are in place for the construction of a rapid transit corridor through campus along with commuter and light rail transit. The Master’s Project will focus on the main multimodal center for this transportation network, the North Carolina State University Rapid Transit Center.
Show less

Title: ASYMPTOTIC SIMILARITY IN TURBULENT BOUNDARY LAYERS
Creator: Duncan, Richard D.
Date: 2011-05-10, 2011-05
Description: The turbulent boundary layer is one of the most fundamental and important applications of fluid mechanics. Despite great practical interest...
Show moreThe turbulent boundary layer is one of the most fundamental and important applications of fluid mechanics. Despite great practical interest and its direct impact on frictional drag among its many important consequences, no theory absent of significant inference or assumption exists. Numerical simulations and empirical guidance are used to produce models and adequate predictions, but even minor improvements in modeling parameters or physical understanding could translate into significant improvements in the efficiency of aerodynamic and hydrodynamic vehicles. Classically, turbulent boundary layers and fully-developed turbulent channels and pipes are considered members of the same “family,” with similar “inner” versus “outer” descriptions. However, recent advances in experiments, simulations, and data processing have questioned this, and, as a result, their fundamental physics. To address a full range of pressure gradient boundary layers, a new approach to the governing equations and physical description of wall-bounded flows is formulated, using a two variable similarity approach and many of the tools of the classical method with slight but significant variations. A new set of similarity requirements for the characteristic scales of the problem is found, and when these requirements are applied to the classical “inner” and “outer” scales, a “similarity map” is developed providing a clear prediction of what flow conditions should result in self-similar forms. An empirical model with a small number of parameters and a form reminiscent of Coles’ “wall plus wake” is developed for the streamwise Reynolds stress, and shown to fit experimental and numerical data from a number of turbulent boundary layers as well as other wall-bounded flows. It appears from this model and its scaling using the free-stream velocity that the true asymptotic form of u′2 may not become self-evident until Re ≈ 275, 000 or δ+ ≈ 105, if not higher. A perturbation expansion made possible by the novel inclusion of the scaled streamwise coordinate is used to make an excellent prediction of the shear Reynolds stress in zero pressure gradient boundary layers and channel flows, requiring only a streamwise mean velocity profile and the new similarity map. Extension to other flows is promising, though more information about the normal Reynolds stresses is needed. This expansion is further used to infer a three layer structure in the turbulent boundary layer, and modified two layer structure in fully-developed flows, by using the classical inner and logarithmic profiles to determine which portions of the boundary layer are dominated by viscosity, inertia, or turbulence. A new inner function for U+ is developed, based on the three layer description, providing a much more simplified representative form of the streamwise mean velocity nearest the wall.
Ph.D. in Mechanical and Aerospace Engineering, May 2011
Show less

Title: Laboratory Notebook 107
Creator: Cooper, Kerri, Lee, Alvin, Slade, Peter
Date: 2010-09-10T18:26:27Z
Description: Determining ozone's optimal conditions (contact time, concentration)

Title: PA 508 Library Instruction
Creator: Ahrens, Aric G.
Date: 2010-01-15, 2010-01-15
Description: This PowerPoint presentation was given to the Chinese contingent of the Master of Public Administration Graduate Program during Spring...
Show moreThis PowerPoint presentation was given to the Chinese contingent of the Master of Public Administration Graduate Program during Spring Semester 2010. It covers basic research and library skills.
Show less

Title: Cavity Resonance Suppression Using Miniature Fluidic Oscillators
Creator: Raman, G., Raghu, S.
Date: 2004-12
Publisher: American Inst Aeronaut Astronaut

Title: Method for Enhancing Diagnostic Images Using Vessel Reconstruction
Creator: Agam, Gad, Wu, Changhua
Date: 2012-03-20, 2010-08-24
Description: A method for improving a thoracic diagnostic image for the detection of nodules. Non-lung regions are removed from the diagnostic image to...
Show moreA method for improving a thoracic diagnostic image for the detection of nodules. Non-lung regions are removed from the diagnostic image to provide a lung image. Vessels and vessel junctions of the lung(s) in the lung image are enhanced according to a first-order partial derivative of each of a plurality of voxels of the lung image. A vessel tree representation is constructed from the enhanced vessels and vessel junctions. The vessel tree representation can be subtracted from the lung image to enhance the visibility of nodules in the lung(s).
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: Nonlinear Interactions as Precursors to Mode Jumps in Resonant Acoustics
Creator: Panickar, P., Srinivasan, K., Raman, G.
Date: 2005-09
Publisher: American Inst Physics
Description: This paper examines instability mode switching in various supersonic jet configurations that involve resonant acoustics. Resonant acoustics...
Show moreThis paper examines instability mode switching in various supersonic jet configurations that involve resonant acoustics. Resonant acoustics includes situations where flow instabilities are enhanced by feedback. The pressure spectra in such situations are rich in multiple modes, and mode switching can occur rather unpredictably. Our experiments reveal that mode switching and the number of nonlinear interactions are interconnected and this number increases just prior to a mode switch. We quantified nonlinear interactions by counting the number of such interactions occurring over a threshold level in the nonlinear cross-bicoherence spectrum and confirmed that nonlinear interactions are precursors to mode jumps. Further, this result was found to be independent of the threshold level. Moreover, if more than one instability mode coexisted, the decay of one and the persistence of the other caused a similar increase in nonlinearities. On the other hand, if there was no mode switch, the nonlinearities remained at comparable limits over the entire operating range. The latter part of the work focused on why difference interactions significantly outnumbered sum interactions in the spectra of shock-containing resonant flows. Using linear stability calculations it is shown that most of the difference interactions that occurred had a positive spatial growth rate and were, hence, unstable. In contrast, a majority of the sum interactions lay outside the amplified region which indicated that they tend to decay spatially. (c) 2005 American Institute of Physics.
http://dx.doi.org/10.1063/1.2008995
Show less

Title: Mycoflora of Indoor Dust and Alternaria Alternata Growth on Building Materials
Creator: Simpson, Stacy
Date: 2011-10-27, 2011-12
Description: Alternaria alternata, a clinically significant mold species is associated with allergic disease and asthma. An indoor growth of A. alternata...
Show moreAlternaria alternata, a clinically significant mold species is associated with allergic disease and asthma. An indoor growth of A. alternata may initiate atopic symptoms, accumulate in dusts, and discolor and deteriorate indoor building materials. Environmental control should be the initial approach to maintain a healthy indoor environment and manage allergic diseases. The current thesis investigated indoor dusts from various environments for mold spores and Alt a 1. Laboratory studies were carried out to determine if or which commercially available mold-resistant treatments and building materials could efficiently decrease A. alternata growth and Alt a 1. The mycoflora of indoor dusts was microscopically examined and the clinically significant allergen from A. alternata, Alt a 1 was measured in sampled dusts using a monoclonal anti-recombinant Alt a 1 (rAlt a 1) enzyme linked immuno-sorbent assay (ELISA). To investigate building material susceptibility untreated, mildew-resistant painted, and commercially available biocide treated building materials were inoculated with A. alternata spores, incubated in a humidity controlled chamber, and compared for mold growth and the presence of Alt a 1. A photo-monitoring technique was used to survey and determine mold growth surface area coverage. Alt a 1 immuno-reactivity of superficial mold growths was analyzed with the ELISA. The microscopic speciation of mold spores indicated that a diverse mycoflora can be found in indoor dusts. Although A. alternata was found in low concentrations in a few samples, Alt a 1was below the limit of detection. Nevertheless, mold spores can significantly contribute to the complexity of indoor dusts. A. alternata grew on all tested building materials but both painted and treated building materials inhibited mold growth in comparison to untreated samples. Not all material surfaces contained detectable levels of Alt a 1. Comparisons between untreated and painted building material groups indicated that a significant difference between the Alt a 1 accumulation content could not be established. To establish a standard sampling protocol and reliable prevention methods for mold contamination and exposure more knowledge about indoor molds must be gained.
M.S. in Environmental Engineering, December 2011
Show less

Title: Introspective Landscape: Efficient Residential Housing: Final Board1_001
Creator: Allen, Nate
Date: 2012-05, 2012-05
Description: This project is a contemporary revisit of the ideas behind Frank Lloyd Wright's Usonian houses. The building consists of three separate...
Show moreThis project is a contemporary revisit of the ideas behind Frank Lloyd Wright's Usonian houses. The building consists of three separate dwelling units on the same lot, a variation from the typical Chicago three-flat in that, rather than the three units being stacked one on top of the other, they are ordered linearly one after the other. The primary advantage of this arrangement is that each unit is allowed access to the ground floor, and to one of the three designated courtyard areas.
Show less

Title: Magnetic Modulator System
Creator: Anderson, Marvin E.
Date: 1962-07-17
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Mixer-ejector Wall Pressure and Temperature Measurements Based on Photoluminescence
Creator: Taghavi, R.r., Raman, G., Bencic, Tj
Date: 2002-04
Publisher: American Inst Aeronaut Astronaut
Description: Ejector side-wall pressure distribution is a key indicator of supersonic jet-mixer-ejector performance. When documenting pressure patterns on...
Show moreEjector side-wall pressure distribution is a key indicator of supersonic jet-mixer-ejector performance. When documenting pressure patterns on an ejector wall using pressure-sensitive paint (PSP), one has to consider temperature variations caused by the supersonic jet flow within the ejector because these can cause significant local errors in the PSP results. If the temperature sensitivity of PSP is not corrected for in complex internal supersonic flows, large localized errors could contaminate the results. In the present work, temperature-sensitive paint maps the temperature distribution on the ejector wall and corrects PSP results point-by-point for temperature sensitivity. The experiments were conducted on multijet supersonic mixer-ejector configurations with straight, convergent (6-deg), and divergent (6-deg) side walls. A comparison of corrected and uncorrected PSP readings shows that at M-j = 1.55, the error with respect to true data from static pressure ports can be reduced from 4.98 to 2.84% for the case of a simple ejector with parallel walls. For the complex 6-deg convergent ejector at M-j = 1.39, the error reduces by almost an order of magnitude (from 20.83 to 2.66%). Our results indicate that the use of this correction technique can significantly reduce PSP errors in complex internal supersonic flow situations.
Show less

Title: Episode 1 - Idea Conception

Title: MECHANICAL PROPERTIES AND SINTERING MECHANISMS OF POWDER METALLURGY TI6AL4V
Creator: Xu, Xiaoyan
Date: 2013, 2013-05
Description: Titanium has been identified as one of the key materials with a high strength to weight ratio that can reduce the weight of components and...
Show moreTitanium has been identified as one of the key materials with a high strength to weight ratio that can reduce the weight of components and thereby reduce energy consumption. Single press and sinter as a powder metallurgy technique has the potential to provide cost effective components. Armstrong prealloyed Ti6Al4V, HDH prealloyed Ti6Al4V, HDH blended Ti6Al4V powder and their mixtures were pressed and sintered at different conditions. The chemistry, mechanical and microstructural properties have been investigated to establish optimum processing parameters. Sintered parts were sent to Oshkosh Truck to test and compared with aluminum and steel parts. The Titanium and Ti6Al4V parts were successfully applied and tested. All the specimens passed the load test without failures. The sintering mechanisms of Armstrong prealloyed Ti6Al4V powder were investigated. At relative sintered densities of 75% to 90% (around 900°C), surface diffusion cooperate with grain boundary diffusion, which leads to densification of the powder compact. Around 900°C, grain boundary diffusion controls the sintering process. At 1000°C, boundary diffusion made little contribution to the densification of the Ti6Al4V powder compact. Above 900°C and below 91% sintered density, boundary diffusion controls sintering. Lattice diffusion dominates the densification process at higher temperatures (1100°C~1300°C). The sintering of master alloy blended Ti6Al4V powder has been investigated in order to elucidate the mechanism of sintering. Both blended powder compacts and diffusion couples were investigated using backscattered imaging and energy xvi dispersive analysis to determine the phases present and diffusion path on sintering at 1000ºC and 1100ºC. It is shown that transient liquid phase sintering does not occur and the reason for the rapid sintering of this material is due to enhanced diffusion kinetics resulting from a combination of the concentration gradient and stress induced by a phase transformation in the ternary system.
PH.D in Materials Science and Engineering, May 2013
Show less

Title: Neutron Discharge Tube
Creator: Reiffel, Leonard
Date: 1961-05-09
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: WEB-BASED CONTEMPORANEOUS DELAY ANALYSIS
Creator: Pektas, Murat
Date: 2011-11-22, 2011-12
Description: The construction industry is fragmented due to the many stakeholders and the diverse phases involved in a construction project. On time,...
Show moreThe construction industry is fragmented due to the many stakeholders and the diverse phases involved in a construction project. On time, within budget, with required quality are essentials of a successful project. However, most construction projects are faced with delays, which obstruct success. To recover the damage caused by delays, both the delays and the parties responsible for them should be identified accurately. Daily window delay analysis outperforms other delay analysis methods, but it requires intensive day-by-day information. The information flow among the project stakeholders must be smooth and speedy at all stages of the production process not only to achieve the basic project objectives but also to let project stakeholders recognize the delays and the parties responsible for them in order to recover time and cost. The Internet is attractive for transferring information promptly and economically with no regional or temporal borders. To merge the power of the Internet and to ease time consuming delay analysis, a web-based application is proposed to analyze delays effectively and contemporaneously, to reduce time and cost, and to provide historical data. The application considers the day-by-day variation in critical path(s) during the project life cycle. The application gives accurate and repeatable results for apportioning project delays, accelerations and decelerations among involved parties. The manual effort required by traditional systems is minimized with the application’s simple, easy to use, yet effective and highly automated features. Moreover, the database structure of the application is designed to store and manage more than one project at a time to let its users calculate the overall performance of the company including all projects, and to calculate average durations for activities that can come up in future projects.
M.S. in Civil Engineering, December 2011
Show less

Title: Empirical modeling of systems with output multiplicities by multivariate additive NARX models
Creator: Decicco, J., Cinar, A.
Date: 2000-06
Publisher: AMER CHEMICAL SOC
Description: Multivariable additive NARX (nonlinear autoregressive with exogenous inputs) modeling of process systems is presented. The model structure is...
Show moreMultivariable additive NARX (nonlinear autoregressive with exogenous inputs) modeling of process systems is presented. The model structure is similar to that of a generalized additive model (GAM) and is estimated with a nonlinear canonical variate analysis (CVA) algorithm called CANALS. The system is modeled by partitioning the data into two groups of variables. The first is a collection of future outputs, and the second is a collection of past input and outputs and future inputs. This approach is similar to linear subspace state-space modeling. An illustrative example of modeling is presented on the basis of a simulated continuous chemical reactor that exhibits multiple steady states in the outputs for a fixed level of the input.
Endnote format citation for DOI:10.1021/ie9906464
Show less

Title: A METHODOLOGY FOR MAJOR BUS ROUTE RESCHEDULING TO IMPROVE TRANSIT PERFORMANCE
Creator: Lu, Xi
Date: 2012-08-01, 2012-07
Description: In a period of growing transit operating deficits, increasing attention and concern is being directed at both the decreasing levels of...
Show moreIn a period of growing transit operating deficits, increasing attention and concern is being directed at both the decreasing levels of productivity of transit systems in general and the broad differences in measured service performance compiled for various transit systems. The purpose of this study is an assist public transit managers by providing them with a mathematical technique to analyze the efficiency with which serviced is produced and the effectiveness with which it is consumed. By providing the analysis model which not requires an extensive amount of data, the operator can have tool for decision-making of profit and market growth. Thus, transit managers will be able to access the performance of the agency and areas where improvements can be realistically achieved. Using the urban operation of the Chicago Transit Authority, a transit performance model is developed to analysis efficiency and effectiveness of the city's bus system. As the system exists, there are 144 bus routes start and end, frequency of dispatching buses and ridership changes from Weekdays and Weekend, peak hour and off-peak hour. In many of these routes, vehicles are used inefficiently and ineffectively, only a few passengers carried in some routes in off-peak hour, yet in other routes through the Central Business District (CBD) area, there are always not enough buses in peak hour. Also, some routes cannot provide enough on-time arrival service and some special group like elderly and handicapped cannot receive enough service in certain area. The goal of case research is to determine to understand the transit performance of Chicago Transit Authority and to select the optimal improvement projects to maximize the performance in term of economy and social equity.
M.S. in Civil Engineering, July 2012
Show less

Title: SUSTAINABLE NEW CITY MENTOUGOU, CHINA
Creator: Yin, Lu
Date: 2013-04-30, 2013-05
Description: This thesis will demonstrate one of the first urban models for the future of China’s growth. The Urban Operating System and GPS make the smart...
Show moreThis thesis will demonstrate one of the first urban models for the future of China’s growth. The Urban Operating System and GPS make the smart city smarter by linking up networks of billions of distributed sensors, systems, and intelligence across urban environments via city-scale operating systems. Personal Rapid Transit system runs everywhere and it is accessed and ordered by smart phone. Green belt is the medium that links all the natural area and parks in the city which become the core element in the city because it plays the most important role. Two types of transportation system including the Meglev for 10 minute access to Beijing and the PRT system for all internal urban mobility. The population of the new city is 80000. 80% of the people live here and work here, 20% of the people live here but work in Beijing. 30% of the people will use PRT system everyday. All the city blocks are mixed-use blocks. There are several types of residential buildings including mid-rise, high-rise and Beijing traditional courtyard house. This sustainable new city provides quality of lift to all the people live in the city.
M.S. in Architecture, May 2013
Show less

Title: Reaching Out and Beyond: Making Library Centered Connections
Creator: Han, Yi, Fu, Li, Fu, Jiaqi
Date: 2012-06-23, 2012-06-23
Description: This poster is presented at the 2012 American Library Association Annual Conference in the Anaheim Convention Center. The hub on campus,...
Show moreThis poster is presented at the 2012 American Library Association Annual Conference in the Anaheim Convention Center. The hub on campus, academic libraries play a significant role in promoting diversity and academic success. Library resources and services have a great impact on university’s recruitment, retention and graduation. This poster session discusses some innovative practices in outreach, effective support in student learning, diverse models in services, and successful approaches in connecting with the campus community.
Show less

Title: DAMAGE DETECTION OF STRUCTURES USING INTERVAL FINITE ELEMENT METHOD
Creator: Venkitaraman, Shyamala
Date: 2012-04-16, 2012-05
Description: Health assessment and damage detection for existing structures is an essential procedure for their safe and reliable operation so that any...
Show moreHealth assessment and damage detection for existing structures is an essential procedure for their safe and reliable operation so that any catastrophic failure may be prevented in a timely manner. However, results obtained from a health assessment of a structure possess uncertainties in measurements, system properties and loads. Furthermore, the conventional deterministic structural analyses are incapable of considering these uncertainties, thereby resulting in error when estimating the state of health of a structure. Interval (unknown-but-bounded) representation is one method to quantify uncertainty in a physical system. Using an interval variable, the uncertain parameter is bounded between extreme values. In this work, a new method for damage assessment of structures is developed that utilizes the results from structural health assessment as uncertain input parameters in an interval finite element analysis scheme. This method, due to its capability of considering uncertainties, offers a more robust process for estimating the possible existence of damage and overall health of the structure. As an illustrative example, the method is applied for a failed sign support structure. First, the structure's response from previous health assessment procedure was used to construct uncertain interval responses. Then using these interval responses as input parameters, an interval finite element method was performed. The results of the analysis verify and correlate with the failure location of the actual structure. Moreover, the lifetime assessment of the structure obtained from this method is the lower bound of, and correlates with the actual failure time of the structure.
M.S. in Civil Engineering, May 2012
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of

Rights