Search results

Title: Hafnium Base Alloy (CR-Al)
Creator: Hill, Vernon L., Nichols, Harry R.
Date: 2009-04-27, 1971-07-27
Description: Sponsorship: IIT Research Institute
United States Patent

Title: Investigation of Fresh Produce Washing on E. Coli O157:H7 and Murine Norovirus with Peroxyacetic Acid and High Power Ultrasound
Creator: Yuan, Wen
Date: 2011-12-05, 2011-12
Description: E. coli O157:H7 and norovirus have each been responsible for outbreaks of foodborne illness involving fresh leafy green vegetables....
Show moreE. coli O157:H7 and norovirus have each been responsible for outbreaks of foodborne illness involving fresh leafy green vegetables. Peroxyacetic acid (POAA) has the potential to be an effective sanitizer during commercial fresh-cut produce washing. The addition of high power ultrasound (HPU) to the washing system may enhance the POAA efficacy. The purpose of this study was to reduce E. coli O157:H7 and norovirus contamination during commercial fresh-cut lettuce washing using POAA and HPU. Fresh-cut romaine lettuce leaves were inoculated with E. coli O157:H7 or murine norovirus (MNV, a surrogate for the human norovirus) and washed by POAA and HPU. Cross-contamination was tested by washing clean leaves in contaminated processing water where pre-inoculated leaves were washed previously. A high level of cross-contamination (4.5-log CFU/g E. coli) occurred after uninoculated leaves were rinsed in contaminated wash water for 2 min. A subsequent 2 min wash in POAA alone or in combination with HPU reduced counts by approximately 1.2-log and 2.3-log, respectively. More than 2-log norovirus was removed from washing 2 min in either DI water or POAA. However infectious MNV washed from leaves was not detected in wash water containing POAA. Those results implied a high possibility of cross-contamination during freshproduce washing, and indicate that adding POAA and HPU in addition to washing water in wash water can reduce cross-contamination rate.
M.S. in Food Safety and Technology, December 2011
Show less

Title: Video Recording System and Method
Creator: Camras, Marvin
Date: 2009-04-27, 1971-06-28
Description: Sponsorship: IIT Research Institute
United States Patent

Title: Agricultural Rehabilitation Tower: RGG-JYL Final Boards 050111
Creator: Garcia, Rodrigo, Lee, Jennifer
Date: 5/4/2011, 2011-05
Description: to create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to...
Show moreto create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to create a ‘vertical façade farm’ capable of producing 156 tons of vegetables (predominantly lettuce, tomatoes, peppers, and strawberries) and 200 tons of fish per year to create a mental health sanctuary (or sanatorium) that provides short term (days), midterm (months) and long term (years) residence and care for people with mental health issues that may require physical operations and/or psychological care. to actively engage the mental health residents in aspects of the agricultural production to draw on research showing that engagement with plants/nature assists in mental healing. to create a large multi-purpose space at the ground floor of the building which will largely serve as a farmer’s market for sale of the agricultural produce and engagement between the community residents and the public to create a series of gardens/green spaces at height within the complex, as well as vertical green walls, for healing (residents and urban issues) to use the double-skin ‘façade farm’ for assisting in passive natural ventilation of internal spaces
Show less

Title: DEVELOPMENT OF A NEW EMERGENCY EVACUATION SYSTEM FOR MINES
Creator: Qian, Qingyi
Date: 2011-08, 2011-07
Description: Underground mining is a very high risk industry. There are many potential hazards in the underground mining these include fire, explosion,...
Show moreUnderground mining is a very high risk industry. There are many potential hazards in the underground mining these include fire, explosion, inundation, roof collapse, toxic gases, chemical pollution, etc. Over past centuries, in US alone, more than 100,000 miners lost their life in different accidents. The primary safety methods used in underground mines concentrate on the monitoring of the hazardous gases, fire detection and ventilation. Using advanced instruments and monitoring techniques have significantly reduced the accidents in the modern mines. However despite the advancement of these monitoring facilities, accidents still occur in underground mining annually around the world, and many miners were killed because they were trapped and unable to escape due to blocked of exit access. This thesis describes a new development of an emergency evacuation system in underground mines and analyzes the advantages and disadvantages of the system. It is expected that the new system will greatly improve the emergency exit methods and save more lives in the future. The new emergency evacuation system consists of vertical concrete mineshaft, high capacity mineshaft elevators, surface terminal and underground support structures. In addition, the study of numerical simulation was carried out to observe the ground response during excavation. A typical ground profiles for underground mining in south part of China was used in this analysis. The results selected from shaft excavation simulation indicate that fluid drilling method effectively prevents the soil around mineshaft from collapse hazard. Compared to soil strength, soil stiffness has a significant influence on the soil response induced by excavating shafts.
Ph.D. in Civil Engineering, July 2011
Show less

Title: Tension Indicating Fastener
Creator: Liber, Theodore
Date: 2009-04-30, 1973-02-27
Description: A bolt having a shank and integral head has a strip of photoelastic material mounted in the head for manifesting in the form of photoelastic...
Show moreA bolt having a shank and integral head has a strip of photoelastic material mounted in the head for manifesting in the form of photoelastic fringes linearly related to bolt tension the bending stresses created in the head during loading of the bolt. To determine the tension in the bolt during or after loading, polarized light is directed toward the photoelastic strip and reflected light from the strip is analyzed to measure fringe order. The fringe order is related to the amount of bending stresses in the head of the bolt by a predetermined calibration curve, the bending stresses being linearly related to bolt tension.
Sponsorship: IIT Research Institute
United States Patent
Show less

Title: Heat-Releasing Anti-Icing Means
Creator: Budenholzer, Roland A., Olmer, Francois J.
Date: 1959-12-22
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Ionic Contact Media for Electrodes and Soil in Conduction Heating
Creator: Bridges, Jack E., Sresty, Guggilam C., Dev, Harsh, Jambor, Richard
Date: 2009-05-11, 1996-12-17
Description: Ionic contact is established and maintained between electrodes and soil in ohmic heating of a subsurface formation for recovery of volatile...
Show moreIonic contact is established and maintained between electrodes and soil in ohmic heating of a subsurface formation for recovery of volatile and semi-volatile materials, such as hazardous waste, hydrocarbon-like materials, and valuable minerals having thermally responsive properties. A compressed, dry sponge is wrapped around an electrode, which is then inserted into a bore hole. A conductive liquid is added to the bore hole, causing the sponge to swell, creating a stable and substantial interface for the flow of heating currents.
Sponsorship: IIT Research Institute
United States Patent
Show less

Title: Thermal Management of Battery Systems
Creator: Al Hallaj, Said, Selman, Jan Robert
Date: 2009-05-14, 2002-10-22
Description: The invention is to a method of operating a power supply system comprising the steps of discharging at least one cell element of a battery...
Show moreThe invention is to a method of operating a power supply system comprising the steps of discharging at least one cell element of a battery module to produce a quantity of power and a quantity of heat; absorbing at least a portion of the heat in a phase change material in thermal contact with the discharging cell element; following discharge, releasing at least a portion of the heat from the phase change material to heat the at least one cell element; and discharging the at least one cell element at elevated temperature.
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: Study of the action of a four inch grinnell variable pressure alarm valve
Creator: Hotchkin, E. W., Pfaelzer, F. M
Date: 2009, 1910
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofactionoff00hotc
Thesis (B.S.)--Armour Institute of Technology, 1910 B.S. in Fire Protection Engineering,...
Show morehttp://www.archive.org/details/studyofactionoff00hotc
Thesis (B.S.)--Armour Institute of Technology, 1910 B.S. in Fire Protection Engineering, 1910
Show less

Title: Oriented Tape
Creator: Camras, Marvin
Date: 1965-05-25
Description: Sponsorship: IIT Research Institute
United States Patent

Title: Erase Head for Magnetic Recorders
Creator: Camras, Marvin
Date: 1955-02-22
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Method for Securing Streaming Multimedia Network Transmissions
Creator: Davids, Carol, Dorst, Gary, Kousky, Ken, Yahnes, Gene
Date: 2013-05-29, 2013-05-28
Description: A method of securing against an unauthorized transmission within an authorized multimedia transmission from a sending data processor to a...
Show moreA method of securing against an unauthorized transmission within an authorized multimedia transmission from a sending data processor to a receiving data processor. The method includes altering the network transmission to interfere with the unauthorized transmission and render the unauthorized transmission invalid to the receiving data processor while not noticeably interfering with the streaming multimedia transmission. Monitoring for retransmissions or retransmission requests also serves as an indicator to an administrator that an unauthorized transmission is occurring. The method of this invention can be implemented by network administrator middleboxes such as firewalls.
Sponsorship: Illinois Institute of Technology
United States Patent
Show less

Title: Electrostatic Reproducing Apparatus
Creator: Brophy, James J.
Date: 1965-08-24
Description: Sponsorship: IIT Research Institute
United States Patent

Title: COATING OF BORON NITRIDE THIN FILM ON TITANIUM
Creator: Huang, Mairui
Date: 2013, 2013-12
Description: To improve the wear resistance of titanium and extend its service life, coating boron nitride thin films on the surface of titanium matrix was...
Show moreTo improve the wear resistance of titanium and extend its service life, coating boron nitride thin films on the surface of titanium matrix was studied in this work. To obtain surface property enhancement, the samples were coated by isothermal sintering at 1000°C – 1400°C in a vacuum furnace for 2h, 4h or 6h. The microstructure of the thin film was investigated employing X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). To identify the composition of interlayers between BN and Ti, EDS analysis was run through the whole reaction zone. It showed that the BN was being consumed, titanium borides (TiB and TiB2), titanium nitride (TiN1-x), and solid solution of nitrogen in titanium (α-Ti (N)) layers formed at the interface between the BN coating and Ti matrix. Correspondingly, the XRD analysis indicated that TiB, TiB2, TiN, and α-Ti(N) phases were presented in good agreement with the EDS result. The layers grew fast in the sintering process which benefited from the fine grain size and highly oriented layers grown in the reaction zone. However, the well-known parabolic diffusional growth is only part of mechanisms for explaining the reactiondiffusion kinetics. The diffusion paths were obtained from the phase sequences at the interface between BN and Ti and thus could be represented on the isothermal section of the B-N-Ti ternary diagram. Moreover, the influence of the sintering temperature and the length of the actual sintering period on the layer sequences and thickness of the reaction zone were investigated. The micro-hardness test results showed that the Ti matrix with deposited BN thin films exhibited significant increased surface hardness. Obviously, the surface hardness xiii rose along with sintering temperature and holding time, and the hardness could be improved over 50%.
M.S. in Materials Science and Engineering, December 2013
Show less

Title: Suspended Carrier Modulation of High-Q Transmitters
Creator: Troyk, Philip R., Heetderks, William, Schwan, Martin, Loeb, Gerald
Date: 2009-05-11, 1997-12-09
Description: A method for on-off modulation of a transmitter coil current of a high-Q resonant circuit transmitter comprising the steps of sensing a zero...
Show moreA method for on-off modulation of a transmitter coil current of a high-Q resonant circuit transmitter comprising the steps of sensing a zero-crossing of the transmitter coil current and substantially instantaneously interrupting the transmitter coil current, and a high-Q resonant circuit transmitter for carrying out said method.
Sponsorship: Illinois Institute of Technology
Sponsorship: United States of America as represented by the Department of Health and Human Services
United States Patent
Show less

Title: Means for Network Computation
Creator: Bock, Frederick C., Cameron, Scott H., Kantner, Harold H.
Date: 1962-09-11
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Container Filling Machine
Creator: Bardy, Peter J., Siegelman, Abraham
Date: 1959-08-25
Description: Sponsorship: Armour Research Foundation of Illinois Institute of Technology
United States Patent

Title: Method and Appartus for Passive Mapping
Creator: Kazel, Sidney
Date: 2009-04-27, 1971-02-02
Description: Sponsorship: IIT Research Institute
United States Patent

Title: SIMULATING THE HESTON MODEL VIA THE QE METHOD WITH A SPECIFIED ERROR TOLERANCE
Creator: Zhao, Xiaoyang
Date: 2017, 2017-05
Description: The Quadratic Exponential (QE) model is a market standard simulation method for the Heston stochastic volatility model. We identify certain...
Show moreThe Quadratic Exponential (QE) model is a market standard simulation method for the Heston stochastic volatility model. We identify certain numerical problems with the standard discretization and modify the original method to correct these problems. We implement our modified QE scheme for the Heston model in the Guaranteed Automatic Integration Library (GAIL)|a suite of algorithms that includes Monte Carlo and quasi-Monte Carlo methods for multidimensional integration and computation of means. GAIL computes answers to satisfy user-defined error tolerances. We also implement variance reduction techniques for our modified QE scheme in GAIL. The numerical results show that our modified scheme is fast and accurate, and satisfies the user-defined error tolerances.
M.S. in Applied Mathematics, May 2017
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of

Rights