Search results

Title: DEVELOPMENT AND VALIDATION OF A HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD FOR SIMULTANEOUS DETERMINATION OF VITAMINS A AND D IN FLUID MILK PRODUCTS
Creator: Li, Wenjing
Date: 2013, 2013-12
Description: Measurement of fortification levels for vitamins A and D in fluid milk products is required by the U.S. Food and Drug Administration (FDA)...
Show moreMeasurement of fortification levels for vitamins A and D in fluid milk products is required by the U.S. Food and Drug Administration (FDA) according to Pasteurized Milk Ordinance. In the current study, a high performance liquid chromatographic (HPLC) method was developed for simultaneous determination of retinyl palmitate (vitamin A) and cholecalciferol (vitamin D3) in fortified milk, which will enhance the efficiency of routine monitoring of fortification for processors as well as laboratories. Saponification conditions and extraction solution compositions were studies for best recovery and simplification of the extraction procedures. Saponification conditions studied included temperature (20, 40 and 60℃), time (0.5 to 16 hour) and concentration of KOH (20, 30, 40 and 50%). The variables studied for extraction included solvent compositions (hexane, diethyl ether, ethyl acetate and dichloromethane) and corresponding polarities (0.1, 0.25, 0.5 and 0.75), and number of extractions (once, twice and three times). Freezing and centrifuging steps were also investigated to compare to SPE clean-up, as an alternative method to clean-up before injection. The optimum parameters found were: saponification conditions at 60℃ for 2 hours with 40% (w/v) KOH liquid-liquid extraction with hexane: diethyl ether (80:20, v:v). Vitamins A and D3 were quantitated using an HPLC system with fluorescence detector (FLD) and diode array detector (DAD) respectively within the same injection. Spike recoveries from three different fat levels (skim, 2% and whole) of commercial pasteurized milk samples were in the range of 94 to 110% for both vitamins A and D3 at three spike concentration levels. In addition, at National Institute of Standards and Technology (NIST) Standard Reference Material (SRM 1849a) was used xii for method accuracy evaluation. With eight replicates, the average vitamin A (expressed as retinol equivalents) concentration was 7.52 ± 0.23 μg/g, vitamin D3 concentration was 0.114 ± 0.0062 μg/g, an excellent agreement with the certified value of 7.68 ± 0.23 μg/g for vitamin A and 0.11 ± 0.017 μg/g for vitamin D3. In summary, an HPLC method for simultaneous determination of vitamins A and D3 in fluid milk products has been developed. The method showed high efficiency and accuracy of analysis during a single laboratory validation.
M.S. in Food Safety and Technology, December 2013
Show less

Title: OPTIMAL MATERIAL SELECTION MODEL FOR LEED CERTIFICATION USING GENETIC ALGORITHMS
Creator: Kim, Taehyoung
Date: 2012-12-16, 2012-12
Description: Material selection is an important part of building design because it has great impact on the environment, as buildings during/after...
Show moreMaterial selection is an important part of building design because it has great impact on the environment, as buildings during/after construction are responsible for a large portion of carbon emissions and use many resources and considerable energy. Selecting green materials is an emergent issue in both design firms and construction companies. Green building certification such as LEED systems originated from the desire to improve environmental, economic, financial, and social benefits. The current approach to material selection for sustainability is based only on the designer’s past experiences. An arbitrary approach based on subjective opinions causes unnecessary expense, longer construction duration, and failure to meet desired environmental goals. In order to help decision-makers with the selection of the right materials, this study proposes a model that uses Genetic Algorithms in MATLAB and that optimizes the desired points in LEED Certification within budget constraints. This model can be applied to any project that is pursuing LEED Certification. If the user specifies the desired LEED points, the system recommends the least expensive combination of materials extracted from a database containing detailed information about a large member of materials. The modified model uses multi-objective genetic algorithms to establish trade-off between budget constraints and LEED points. The proposed system is expected to be a useful tool for inexperienced designers and a valuable guideline for designers with extensive experience.
M.S. in Civil Engineering, December 2012
Show less

Title: Transitional Refugee Community: Design Strategy for Dry/Arid Regions
Creator: Nakalembe, Hanifah
Date: 2010-05-01, 2010-05-01
Description: The proposed master’s project is the exploration of how architectural planning and design can improve and increase efficiency in transitional...
Show moreThe proposed master’s project is the exploration of how architectural planning and design can improve and increase efficiency in transitional housing during emergency relief and/or conflict related situations. The project proposal developed through design exploration of several prototypes that would not only be minimal but will also be culturally and climatically adaptive among other things. After a thorough select ion process, concentration was given to arid/dry climate and the area select ed for study was Darfur, Sudan.
Show less

Title: Test of a delco lighting plant
Creator: Porges, Edward D., Given, Louis E
Date: 2009, 1917
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testofdelcolight00porg
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaf 88

Title: Study of the production of resorcin
Creator: Cable, D. E., Prest, J. I.
Date: 2009, 1918
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofproductio00cabl
Thesis (B.S.)--Armour Institute of Technology

Title: INTEGRATION OF TANGENTIAL FLOW FILTRATION AND IMMUNOMAGNETIC SEPARATION FOR RAPID DETECTION OF ESCHERICHIA COLI 0157:H7 IN PRODUCE WASH WATER
Creator: Ren, Yan
Date: 2011-12-12, 2011-12
Description: Escherichia coli O157:H7 is one of the most commonly reported pathogens associated with microbial contamination of leafy greens. Since washing...
Show moreEscherichia coli O157:H7 is one of the most commonly reported pathogens associated with microbial contamination of leafy greens. Since washing is a major postharvest processing step, microbial testing of spent wash water has been suggested as a good marker to determine the contamination status of the products. In this study, the efficiency of four commercial rapid methods (BAX®, IQ-Check, Reveal® and mini-VIDAS®) for detection of E.coli O157:H7 in lettuce wash water was evaluated in comparison with the FDA BAM method. The improvement of the detection sensitivity of these tests by immunomagnetic separation (IMS) technology and sample pre-concentration by Tangential Flow Filtration (TFF) was determined. Twenty-five ml of lab prepared lettuce wash water samples were spiked with 0, 1, 10, 100 CFU of E.coli O157:H7, and subjected to enrichment protocols recommended by each of the methods. The presence of E.coli O157:H7 in the enriched samples were then assayed by the test kits, either directly or after IMS (IMS-Pathatrix ™ or IMS-Dynabeads™) treatments. All four test kits and BAM were able to detect E.coli O157:H7 at levels as low as 1 CFU/25ml of wash water. IMS treatments did not lead to further improvement in detection sensitivity. Experiments were also performed to determine the feasibility of incorporating IMS and sample pre-concentration to achieve culture-free detection. Fifty ml of wash water samples were inoculated with E.coli O157:H7 at levels of 0 to 107 CFU and analyzed by the test kits either directly or after IMS-Pathatrix™ treatment. Additionally, 10 L of wash water either prepared in the lab or collected from a commercial fresh-cut processing facility were inoculated with 0 – 106 CFU of the pathogen and subjected to TFF concentration prior to IMS or test kit analyses. IQ-Check showed the highest sensitivity with a detection limit as low as 103 CFU/50ml, and, with IMS, achieved a sensitivity of 100 CFU/50ml. Combining TFF concentration and IMS, 10 L of lab prepared wash water can be tested with IQ-Check and achieve a detection limit of approx. 100 CFU/10 L within 6 hours. For 10L of industry spent wash water, IQ-check also showed the highest sensitivity but the results lacked consistency and required additional evaluations.
M.S. in Food Safety and Technology, December 2011
Show less

Title: NUMERICAL SINGULARITY ANALYSIS
Creator: Adomaitis, R. A., Cinar, A.
Date: 1991
Publisher: PERGAMON-ELSEVIER SCIENCE LTD
Description: A numerical scheme is presented for classifying the different static bifurcation behaviors exhibited by a nonlinear system in its remaining...
Show moreA numerical scheme is presented for classifying the different static bifurcation behaviors exhibited by a nonlinear system in its remaining parameter space. This numerical technique differs from previously published schemes in that the application of singularity theory is done numerically and requires no explicit differentiations of the system in question. It also does not require the reduction of the mathematical model to a scalar equation. The utility of this multivariable scheme will be demonstrated through an application to a seven PDE tubular packed-bed reactor model.
Endnote format citation
Show less

Title: RECONFIGURABLE ANALOG FRONT-END SYSTEM FOR ULTRASONIC IMAGING APPLICATIONS
Creator: Vasudevan, Vidya
Date: 2014, 2014-12
Description: Ultrasonic systems, applied in the field of Medical Imaging and Non-Destructive Testing, have evolved from the trolley-based units to more...
Show moreUltrasonic systems, applied in the field of Medical Imaging and Non-Destructive Testing, have evolved from the trolley-based units to more portable, hand-held devices. These systems are built to suit a specific application or aim at specific target material. In order to make these systems portable and adaptable to the testing environment, a flexible and programmable hardware is built. A fully configurable Analog Front-End (AFE) is presented, which possesses the capability for dynamic re-configuration by using ARM processing core for real-time control, data acquisition and signal analysis in a Linux environment. This system supports up to 8 ultrasonic sensors. The flexibility built into the AFE allows for various beamforming and signal conditioning requirements. This reconfigurable system enables ultrasonic researchers to efficiently prototype different experiments and to incorporate high performance ultrasonic signal and image processing algorithms. This system provides real-time signal processing for nondestructive evaluation (NDE) and imaging applications using ultrasonic sensors ranging from 60 KHz to 15 MHz operating frequencies. A dynamically reconfigurable sensor interface is presented for ultrasonic pulse-echo measurements targeting flaw detection and parametric echo classification applications. For real-time implementation, a SoC-based system is developed on an ARM platform. For a working system, a BCM2835 SoC on a Raspberry Pi hardware system is explored with a further upgrade to Xilinx Zynq 7020 SoC in order to achieve a higher throughput.
M.S. in Electrical Engineering, December 2014
Show less

Title: HYBRID TO SOCIAL CONDENSER: COMPETING APPROACHES TO MIXED-USE DEVELOPMENT
Creator: Zagow, Maged
Date: 2016, 2016-12
Description: In the last two decades, mixed use has taken center stage in urban planning development in the United States. The research frequently cites...
Show moreIn the last two decades, mixed use has taken center stage in urban planning development in the United States. The research frequently cites this development as a model that can address a variety of socioeconomic problems. Also, it has enjoyed a recent surge in popularity in redeveloping cities by providing more affordable housing opportunities, ensuring safety, reducing auto-dependency, and for providing a sense of place and community. However, its affordability, physical design, and outcomes are highly variable. This study is particularly interested in whether and how mixed use affects the socioeconomics configuration of the built environment. This study uses multilevel data from the county level to the zip code level that represents all US neighborhoods. I use different implementation methods of mixed-use development and different cultural and historical backgrounds to examine the data. The study adopts six mixed-use models that present different methodological interactions between socioeconomic spatial metrics and urban forms. These models represent the realistic constraints of urban geometry and of the socioeconomic structure that comprises the charateristics of race, income, accessibility, safety, adjacency, accessibility, environment, and density. This study finds that the built environment produces a rich landscape of information that appears to guide the opportunities for facilities. The analysis shows that mixed-use development may have certain effects on the number of facilities, housing, income, diversity, crime rate, employment, health, and environment. The analysis of this research works in two dimensions. First, urban models (Hybrid and Social Condenser in general and under two categories Metropolis and Neighborhood Community). The second dimension is the urban characteristics (zoning programming, land use mix, streets fabric), socioeconomics variables (Population density, occupied housing, median age, diversity of race, income, and employment rates), and location variation (states, and cities). The results confirm that mixing the facilities in hybrid communities create more jobs opportunities but limit the affordability of housing, social cohesion and the race diversity. But in Social Condenser models, there are more race diversity safety and healthy environment. These results reflect complexity demands more than mixed-use developments, beyond Jane Jacobs' requirements, and beyond the designation of selected mixed-use zones. This study contributes to the study of how mixed-use development models shift because of various social and economic conditions. The findings from this study can inform architects, investors, policymakers, economists, and planners about factors that sustain mixed-use neighborhoods in the United States and beyond. Urban designers will be able to inform how the seemingly necessary act of laying out mixed-use development can affect the socioeconomic structure of a city. Thus, this study is a useful source for more accurate planning ideas than generic abstract theories or slogans.
Ph.D. in Architecture, December 2016
Show less

Title: STUDIES ON SYNTHETIC APPLICATIONS OF STEREOSELECTIVE AND REGIOSELECTIVE RING OPENING REACTIONS OF AZIRIDINIUM IONS
Creator: Chen, Yunwei
Date: 2014, 2014-12
Description: Aziridinium ions are valuable reactive intermediates in organic synthesis. Regioselective and stereoselective ring opening reactions of...
Show moreAziridinium ions are valuable reactive intermediates in organic synthesis. Regioselective and stereoselective ring opening reactions of aziridinium ions can provide various useful building blocks including optically active vincinal amines, amino alcohols and amino esters. Aziridinium ions are also involved in the biological process of anti-cancer agents. However, aziridinium ions are under-utilized in organic synthesis. In this thesis, we utilize stereoselective and regioselective ring opening reactions of aziridinium ions for synthesis of enantiomerically enriched compounds. Ring opening reactions of aziridinium ions were utilized in intramolecular Friedel-Crafts (FC) reactions for stereoselective and regioselective synthesis of 4-substituted tetrahydroisoquinoline. A series of β-haloamine were prepared as precuresors of aziridinium ions. The reaction conditions for ring opening of aziridinium ions for the FC reactions including temperature, catalysts, and solvents were optimized. Further, the reaction mechanism was studied to prove that the aziridinium ions were formed as the key intermediates during the intramolecular FC reaction. Intermolecular nucleophilic ring opening reaction of aziridinium ions was studied as a convenient method of carbon-carbon formation. Regioselective and stereoselective nucleophilic substitution reactions of aziridinium ions with indole analogues were carried out for the synthesis of optically active tryptamine analogues. The reactions proceeded smoothly to provide the tryptamine analogues in high yield in the presence of halo-sequestering agents, while the reaction provided the tryptamine products in significantly low yield in the absence of halo-sequestering agents. Ring opening reactions of aziridinium ions with malonic esters and Grignard reagents were carried out for the respective synthesis of optically active tryptamine analogues, γ-aminobuyric acid (GABA), and α-amine derivatives. The regiospecific ring opening reactions of aziridinium ions was directly applied for the synthesis of bifunctional ligands which have a potential use in targeted therapy and imaging of cancers. The novel bifunctional chelates with a shorter alkyl spacer C-NETA and 2E-C-NETA as well as the chelates with a longer alkyl spacer 5p-C-NETA were prepared. 5p-C-NETA was conjugated to a cyclic peptide c(RGDyK) as a targeting moiety for use in targeted radiation therapy. In addition, 2E-C-NETA was conjugated to a fluorescent dye Cy5.5 for theranostic applications. The experimental results indicated that the new bifunctional ligands have promising applications in the biomedical field. In summary, stereoselective and regioselective ring opening reactions of aziridinium ions have been successfully applied for the synthesis of optically active compounds such as 4-substituted tetrahydroisoquinolines, tryptamines, γ-aminobuyric acid, α-amine derivatives and the bifunctional chelators. We demonstrated that ring opening of versatile aziridinium intermediates is a strightforward and convenient method for the synthesis of various optically active compounds.
Ph.D. in Chemistry, December 2014
Show less

Title: Test of slender wooden struts for aeroplanes
Creator: Smith, M. A,, Kellener, W. A., Stevens, W. A.
Date: 2009, 1910
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testofslenderwoo00smit
Thesis (B.S.)--Armour Institute of Technology

Title: Inclusive measurements at HERA from low to high x, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
Creator: Behnke, Olaf
Date: 2013-09-15, 2013-09-15
Publisher: IIT Press
Description: New inclusive Deep Inelastic Scattering (DIS) measurements are presented, obtained with the H1 and ZEUS detectors at HERA. The results...
Show moreNew inclusive Deep Inelastic Scattering (DIS) measurements are presented, obtained with the H1 and ZEUS detectors at HERA. The results comprise (flavour) inclusive DIS cross sections as well as inclusive charm production. In the area of inclusive DIS, both H1 and ZEUS completed last year their high Q2 Neutral and Charged current measurements exploiting the large statistics from the HERA II running period. For inclusive charm production, H1 and ZEUS published a combination of numerous existing measurements based on various tagging methods. Among other things a precise determination of the running charm quark mass mc(mc) was obtained from the combined data.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less

Title: A CONCEPTUAL SOLAR CHIMNEY PLANT AND FLORAL FARM USING ETFE AND BAMBOO
Creator: De Vita, Niels
Date: 2012-11-20, 2012-12
Description: Motivated by a desire to create an architectural response to the environmental and social challenges of today, the following thesis project...
Show moreMotivated by a desire to create an architectural response to the environmental and social challenges of today, the following thesis project attempts to offer new paths for the future development of the solar chimney energy plant concept originally developed by the German engineer Jӧrg Schlaich in the early 1980s. The starting point of this thesis was to analyze the solar chimney prototype completed in the Manzanares desert in 1982 in order to understand the parameters guiding the design. The analysis allowed me to better understand the potential of the concept and to recognize the opportunity that existed to push the technological boundaries to craft a new design that reflects the current socio-political, economical and environmental context we live in. In the following pages, I attempt to demonstrate that the concept could be made even more appealing through the use of technology and locally available resources. By doing this, I seek to reinvigorate the idea, opening paths for a new conversation about the potential of the project as a social agent for progress. Throughout this thesis, I remain respectful and aware of the accomplishments of the pioneers before me, simply taking cues from their work to suggest new alternatives and solutions to a problem that has been made even more pressing due to the world’s energy crisis and economic uncertainty.
M.S. in Architecture, December 2012
Show less

Title: THE CHANGE OF KURTOSIS IN IMPORTANCE SAMPLING FOR MONTE CARLO
Creator: Zhang, Xiaodong
Date: 2013, 2013-12
Description: The Mont e Carlo (II IC) Method is commonly used to approximat e mult ivariat e integrals, which can be interpreted as means of random variab...
Show moreThe Mont e Carlo (II IC) Method is commonly used to approximat e mult ivariat e integrals, which can be interpreted as means of random variab les. The IIIC method uses th e sample mean to estimate the tr ue mean. In this thesis, we focus on minimizing th e sample size in MC simulat ion needed to sat isfy the specified error tolerance. Based on t he algorithm proposed by [5], we explain that t he cost of reliable IIIe est imat ion depends not only on variance but also on kurtosis. T herefore, when we try to improve th e efficiency of MC simulation by reducing variance, such as with Importance Sampling (IS), we need also look into the change of kurtosis. We analyze the change of cost in terms of the change of kur tosis and the change of variance. For a special case of IS we explore how to find th e optimal density in order to reduce variance.
M.S. in Applied Mathematics, December 2013
Show less

Title: Juvenile Treatment Center
Creator: Cueva, Hernan
Date: 2010-07-29

Title: ELIASHBERG ANALYSIS OF CUPRATE OXIDE SUPERCONDUCTORS
Creator: Ahmadi, Omid
Date: 2011-11, 2011-12
Description: In this thesis, evidence for antiferromagnetic spin uctuations as the pairing glue in high temperature superconductors is presented through a...
Show moreIn this thesis, evidence for antiferromagnetic spin uctuations as the pairing glue in high temperature superconductors is presented through a modi ed Eliashberg analysis of experimental tunneling data of Bi2212 over a wide range of doping. In particular, the normalized conductance data of the junctions, from optimal to overdoped, will be tted at T=0K using d-wave Eliashberg equations where the spectral function is modeled after spin uctuation spectra seen in experiments. The corresponding real and imaginary diagonal and anomalous self-energy curves are extracted and compare well to photoemission experiments. This is followed by a temperature dependent Eliashberg analysis where the spectral function is now temperature dependent, based on trends seen in inelastic neutron scattering experiments. New results for temperature dependent self energy curves are also compared to experiment with slight deviations. Finally, the Josephson product is calculated as an independent check of the tunneling matrix used in tting the data.
Ph.D. in Physics, December 2011
Show less

Title: Investigation of Fresh Produce Washing on E. Coli O157:H7 and Murine Norovirus with Peroxyacetic Acid and High Power Ultrasound
Creator: Yuan, Wen
Date: 2011-12-05, 2011-12
Description: E. coli O157:H7 and norovirus have each been responsible for outbreaks of foodborne illness involving fresh leafy green vegetables....
Show moreE. coli O157:H7 and norovirus have each been responsible for outbreaks of foodborne illness involving fresh leafy green vegetables. Peroxyacetic acid (POAA) has the potential to be an effective sanitizer during commercial fresh-cut produce washing. The addition of high power ultrasound (HPU) to the washing system may enhance the POAA efficacy. The purpose of this study was to reduce E. coli O157:H7 and norovirus contamination during commercial fresh-cut lettuce washing using POAA and HPU. Fresh-cut romaine lettuce leaves were inoculated with E. coli O157:H7 or murine norovirus (MNV, a surrogate for the human norovirus) and washed by POAA and HPU. Cross-contamination was tested by washing clean leaves in contaminated processing water where pre-inoculated leaves were washed previously. A high level of cross-contamination (4.5-log CFU/g E. coli) occurred after uninoculated leaves were rinsed in contaminated wash water for 2 min. A subsequent 2 min wash in POAA alone or in combination with HPU reduced counts by approximately 1.2-log and 2.3-log, respectively. More than 2-log norovirus was removed from washing 2 min in either DI water or POAA. However infectious MNV washed from leaves was not detected in wash water containing POAA. Those results implied a high possibility of cross-contamination during freshproduce washing, and indicate that adding POAA and HPU in addition to washing water in wash water can reduce cross-contamination rate.
M.S. in Food Safety and Technology, December 2011
Show less

Title: Highrise
Creator: Ma, Shasha
Date: 5/4/2011, 2011-05
Description: Highrise structure study
Sponsorship: Land, Peter

Title: Agricultural Rehabilitation Tower: RGG-JYL Final Boards 050111
Creator: Garcia, Rodrigo, Lee, Jennifer
Date: 5/4/2011, 2011-05
Description: to create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to...
Show moreto create a vertical community bound together by two key issues/requirements in Korean society: urban agriculture and mental health care to create a ‘vertical façade farm’ capable of producing 156 tons of vegetables (predominantly lettuce, tomatoes, peppers, and strawberries) and 200 tons of fish per year to create a mental health sanctuary (or sanatorium) that provides short term (days), midterm (months) and long term (years) residence and care for people with mental health issues that may require physical operations and/or psychological care. to actively engage the mental health residents in aspects of the agricultural production to draw on research showing that engagement with plants/nature assists in mental healing. to create a large multi-purpose space at the ground floor of the building which will largely serve as a farmer’s market for sale of the agricultural produce and engagement between the community residents and the public to create a series of gardens/green spaces at height within the complex, as well as vertical green walls, for healing (residents and urban issues) to use the double-skin ‘façade farm’ for assisting in passive natural ventilation of internal spaces
Show less

Title: DEVELOPMENT OF A NEW EMERGENCY EVACUATION SYSTEM FOR MINES
Creator: Qian, Qingyi
Date: 2011-08, 2011-07
Description: Underground mining is a very high risk industry. There are many potential hazards in the underground mining these include fire, explosion,...
Show moreUnderground mining is a very high risk industry. There are many potential hazards in the underground mining these include fire, explosion, inundation, roof collapse, toxic gases, chemical pollution, etc. Over past centuries, in US alone, more than 100,000 miners lost their life in different accidents. The primary safety methods used in underground mines concentrate on the monitoring of the hazardous gases, fire detection and ventilation. Using advanced instruments and monitoring techniques have significantly reduced the accidents in the modern mines. However despite the advancement of these monitoring facilities, accidents still occur in underground mining annually around the world, and many miners were killed because they were trapped and unable to escape due to blocked of exit access. This thesis describes a new development of an emergency evacuation system in underground mines and analyzes the advantages and disadvantages of the system. It is expected that the new system will greatly improve the emergency exit methods and save more lives in the future. The new emergency evacuation system consists of vertical concrete mineshaft, high capacity mineshaft elevators, surface terminal and underground support structures. In addition, the study of numerical simulation was carried out to observe the ground response during excavation. A typical ground profiles for underground mining in south part of China was used in this analysis. The results selected from shaft excavation simulation indicate that fluid drilling method effectively prevents the soil around mineshaft from collapse hazard. Compared to soil strength, soil stiffness has a significant influence on the soil response induced by excavating shafts.
Ph.D. in Civil Engineering, July 2011
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of