Search results
(641 - 660 of 4,268)
Pages
- Title
- Intelligent process monitoring by interfacing knowledge-based systems and multivariate statistical monitoring
- Creator
- Norvilas, A., Negiz, A., Decicco, J., Cinar, A.
- Date
- 2000-08
- Publisher
- ELSEVIER SCI LTD
- Description
-
An intelligent process monitoring and fault diagnosis environment has been developed by interfacing multivariate statistical process...
Show moreAn intelligent process monitoring and fault diagnosis environment has been developed by interfacing multivariate statistical process monitoring (MSPM) techniques and knowledge-based systems (KBS) for monitoring multivariable process operation. The real-time KBS developed in G2 is used with multivariate SPM methods based on canonical variate stare space (CVSS) process models. Fault detection is based on T-2 charts of state variables. Contribution plots in G2 are used for determining the process variables that have contributed to the out-of-control signal indicated by large T-2 values, and G2 Diagnostic Assistant (GDA) is used to diagnose the source causes of abnormal process behavior. The MSPM modules developed in Matlab are linked with G2. This intelligent monitoring and diagnosis system can be used to monitor multivariable processes with autocorrelated, cross-correlated, and collinear data. The structure of the integrated system is described and its performance is illustrated by simulation studies.
Endnote format citation
Show less
- Title
- Innovative Mapping (sequence unknown), IPRO 303 - Deliverables: IPRO 303 Ethics Report F09
- Creator
- Komoroski, Aaron, Mora, Andres, Sarraf, Basel, Kemp, Brandon, Duong, Cindy, Woodward, Frank, Suwada, Jerry, Michael, Mark, Sinha, Piyush, Glover, Richard, Mandrekar, Urba
- Date
- 2009-12
- Description
-
The team worked to target the majority of mobile device users and give them an outlet to report any changes, mistakes or developments that...
Show moreThe team worked to target the majority of mobile device users and give them an outlet to report any changes, mistakes or developments that have been overlooked by NAVTEQ in the company's mobile mapping solutions. The team also worked to develop a solution that enables the average map user – men and women ages 18-35, students and tourists – to address these alterations in a simple, hassle-free way.
Sponsorship: NAVTEQ
Deliverables for IPRO 303: Innovative Mapping for the fall 2009 semester.
Show less
- Title
- NETWORK CODING BASED COOPERATIVE PEER-TO-PEER REPAIR IN WIRELESS NETWORKS
- Creator
- Liu, Yu
- Date
- 2012-07-11, 2012-07
- Description
-
Multimedia Broadcast/Multicast Service (MBMS) in cellular networks has emerged recently as a promising distribution model to provide rich...
Show moreMultimedia Broadcast/Multicast Service (MBMS) in cellular networks has emerged recently as a promising distribution model to provide rich content distribution where a batch of content is broadcast to a large number of peers simultaneously. However, ensuring efficient error-free message delivery in such a scenario is a challenge, since packet loss is inevitable due to the time-varying nature of wireless transmissions, and the server is probably overwhelmed by floods of individual retransmission requests from peers. Cooperative Peer-to-Peer (P2P) information repair has been proposed to mitigate the packet loss among peers during Base Station (BS) broadcast, by allowing peers to cooperate on information exchange among themselves, rather than asking the BS to rebroadcast the lost packets for the peers. Network Coding, a fairly recent transmission paradigm with the potential network throughput improvement and high reliability advantage, has been widely recognized as a promising information dissemination approach for wireless networks. In this research, we study the network coding based cooperative P2P information repair in wireless networks. We first propose our initial work - a connected dominating set (CDS) based P2P information repair (PPIR) protocol with network coding which utilize the clustering idea, to minimize the total repair latency as well as alleviate the congestion and burden of BS’s downlink channels. Then the decision making problem for P2P repair with densely distributed nodes is studied and two approaches are provided. Later on, the NC based P2P information repair protocol with tunable parameter (NC-PIRTP) which evolved from PPIR protocol is proposed to further reduce transmission collisions and total repair latency. At last, P2P information repair under mobile network environment with pedestrian speed is studied and three efficient protocols are illustrated which are suitable to different specific cases. Extensive simulation results are provided for performance evaluation and comparisons, and to demonstrate the effectiveness and efficiency of our proposed protocols in terms of the total repair latency. Furthermore, an analytical model is developed, based on which theoretical results are derived. These results validate our protocol models and provide useful protocol design guideline for the cooperative P2P information repair problem in wireless networks.
Ph.D. in Electrical Engineering, July 2012
Show less
- Title
- POWER SYSTEM VOLTAGE STABILITY AND AGENT BASED DISTRIBUTION AUTOMATION IN SMART GRID
- Creator
- Nguyen, Cuong Phuc
- Date
- 2011-04-25, 2011-05
- Description
-
Our interconnected electric power system is presently facing many challenges that it was not originally designed and engineered to handle. The...
Show moreOur interconnected electric power system is presently facing many challenges that it was not originally designed and engineered to handle. The increased interarea power transfers, aging infrastructure, and old technologies, have caused many problems including voltage instability, widespread blackouts, slow control response, among others. These problems have created an urgent need to transform the present electric power system to a highly stable, reliable, efficient, and self-healing electric power system of the future, which has been termed “smart grid”. This dissertation begins with a discussion on the voltage stability issue in bulk transmission networks. A new continuation power flow tool for studying the impacts of generator merit order based dispatch on inter-area transfer capability and static voltage stability is presented. In using this tool, it is realized that all distribution systems are represented by only a single lumped load model. While this representation is acceptable in traditional power system analysis, it may not be valid in the future smart grid where the distribution system will be integrated with intelligent and quick control capabilities to mitigate voltage problems before they propagate into the entire system. Therefore before analyzing the operation of the whole smart grid, it is important to understand the distribution system first. The second part of this dissertation presents a new platform for studying and testing emerging technologies in advanced Distribution Automation (DA) within smart grids. Due to the key benefits over the traditional centralized approach, namely flexible deployment, scalability, and avoidance of single-point-of-failure, a new distributed approach is employed to design and develop all elements of the platform. The multi-agent system (MAS), which has the three key characteristics of autonomy, local view, and decentralization, is selected to implement the advanced DA functions. The intelligent agents utilize the communication network for cooperation and negotiation. Communication latency is modeled using a user-defined probability density function. Failure-tolerant communication strategies are developed for agent communications. Major elements of advanced DA are developed in a completely distributed way and successfully tested for several IEEE standard systems, including: Fault Detection, Location, Isolation, and Service Restoration (FLISR); Coordination of Distributed Energy Storage Systems (DES); Distributed Power Flow (DPF); Volt-VAR Control (VVC); and Loss Reduction (LR).
Ph.D. in Electrical Engineering, May 2011
Show less
- Title
- Statistical process monitoring and disturbance diagnosis in multivariable continuous processes
- Creator
- Raich, A., Cinar, A.
- Date
- 1996-04
- Publisher
- AMER INST CHEMICAL ENGINEERS
- Description
-
Detecting out-of-control status and diagnosing disturbances leading to the abnormal process operation early are crucial in minimizing product...
Show moreDetecting out-of-control status and diagnosing disturbances leading to the abnormal process operation early are crucial in minimizing product quality variations Multivariate statistical techniques are used to develop detection methodology for abnormal process behavior and diagnosis of disturbances causing poor process performance. Principal components and discriminant analysis ave applied to quantitatively describe and interpret step, ramp and random-variation disturbances. All disturbances require high-dimensional models for accurate description and cannot be discriminated by biplots. Diagnosis of simultaneous multiple faults is addressed by building quantitative measures of overlap between models of single faults and their combinations. These measures are used to identify the existence of secondary disturbances and distinguish their components. The methodology is illustrated by monitoring the Tennessee Eastman plant simulation benchmark problem subjected to different disturbances. Most of the disturbances can be diagnosed correctly, the success rate being higher for step and vamp disturbances than random-variation disturbances.
Endnote format citation
Show less
- Title
- Reversal in Spreading of a Tabbed Circular Jet Under Controlled Excitation
- Creator
- Zaman, Kbmq, Raman, G.
- Date
- 1997-12
- Publisher
- American Inst Physics
- Description
-
Detailed flow field measurements have been carried out for a turbulent circular jet perturbed by tabs and artificial excitation. Two ''delta...
Show moreDetailed flow field measurements have been carried out for a turbulent circular jet perturbed by tabs and artificial excitation. Two ''delta tabs'' were placed at the nozzle exit at diametrically opposite locations. The excitation condition involved subharmonic resonance that manifested in a periodic vortex pairing in the near flow field. While the excitation and the tabs independently increased jet spreading, a combination of the two diminished the effect. The jet spreading was most pronounced with the tabs but was reduced when excitation was applied to the tabbed jet. The tabs generated streamwise vortex pairs that caused a lateral spreading of the jet in a direction perpendicular to the plane containing the tabs. The excitation, on the other hand, organized the azimuthal vorticity into coherent ring structures whose evolution and pairing also increased entrainment by the jet. In the tabbed case, the excitation produced coherent azimuthal structures that were distorted and asymmetric in shape. The self-induction of these structures produced an effect that opposed the tendency for the lateral spreading of the streamwise vortex pairs. The passage of the distorted vortices, and their pairing, also had a cancellation effect on the time-averaged streamwise vorticity field. These led to the reduction in jet spreading. [S1070-6631(97)03012-2].
Show less
- Title
- Laboratory Notebook 123
- Creator
- Didsatha-amnarj, Yanan, Slade, Peter
- Date
- 2010-03-03T21:24:34Z
- Description
-
This laboratory notebook relates to the "Furans in food; Mechanism in food" project which is under the Chemical Constituents and Allergens...
Show moreThis laboratory notebook relates to the "Furans in food; Mechanism in food" project which is under the Chemical Constituents and Allergens Platform with Peter Slade as the Principle Investigator.
Show less
- Title
- MODELING, CONTROL, AND DESIGN OF HYBRID FUEL CELL VEHICLES
- Creator
- Ahmed, Syed
- Date
- 2011-12, 2011-12
- Description
-
The Polymer Electrolyte Membrane Fuel Cell (PEMFC) has been projected to be the fuel cell of choice for future automotive applications. Among...
Show moreThe Polymer Electrolyte Membrane Fuel Cell (PEMFC) has been projected to be the fuel cell of choice for future automotive applications. Among the challenging aspects of this application is maintaining highly efficient operation of the fuel cell. The key component of the PEMFC, the Nafion Membrane, can reach two critical states: drying and flooding. In drying, high resistance prevents normal operation of the fuel cell. In flooding, reactants are prevented from reaching reaction sites and there is a reduction of performance of the fuel cell. To address the first point, a spatially distributed along the plane membrane model was developed and tested with proportional-integral control of voltage and temperature. To analyze the occurrence of severe and frequent changes in power demand, a model aimed at mimicking the load expected in a fuel cell vehicle, including a DC motor, DC-DC converters and a rechargeable battery for peak-shaving and regenerative braking was developed. The model includes rotational and translational inertia as well as a simple wind resistance model for a vehicle. In contrast to simple lab-focused loads where load impendence is directly manipulated, the manipulated variable within this load is the DC-DC converter gain. Based on this model a control system architecture was developed consisting of a number of low level regulatory loops, a power distributor for peak-shaving and finally a high level loop for tracking vehicle speed. After understanding the load demands to a fuel cell vehicle with only a battery, the issue of multiple energy storage technologies is addressed. Designing a vehicle with these technologies poses an optimization problem. A high-level model of a fuel cell vehicle with two storage technologies, a battery and super-capacitor was developed. The model accounted for the constraints of each component and a drive cycle characterized the power demand. An economic-based optimization problem xv was posed whereas its objective was to minimize the capital cost of the system, while meeting power demand and keeping the technologies within their constraints. The result of the optimization provided a controller from which a high-level power coordination unit can be developed for the fuel cell vehicle.
Ph.D. in Chemical Engineering, December 2011
Show less
- Title
- AN INVESTIGATION OF THE QUASI-STANDARD ERROR FOR QUASI-MONTE CARLO METHOD
- Creator
- Deng, Siyuan
- Date
- 2013-05-01, 2013-05
- Description
-
In this thesis we discuss the theory of the Quasi-Standard Error(QSE) estimate which plays an important role in the practice of the Quasi...
Show moreIn this thesis we discuss the theory of the Quasi-Standard Error(QSE) estimate which plays an important role in the practice of the Quasi-Monte Carlo method. In the first part the deduction using Walsh series reveals an expression for the Quasi- Standard Error for digital nets. The second part of this thesis a special class of functions has been designed to fool the Quasi-Standard Error, and based on the previous theory we reveal the reason why the Quasi-Standard-Error can be fooled. The third part, apply the theory we developed to some actual application in financial mathematics, to see if the QSE works well in practice. There are mixed results.
M.S. in Applied Mathematics, May 2013
Show less
- Title
- Fault detection and diagnosis in a food pasteurization process with hidden Markov models
- Creator
- Tokatli, F., Cinar, A.
- Date
- 2004-12
- Publisher
- CANADIAN SOC CHEMICAL ENGINEERING
- Description
-
Hidden Markov Models (HMM) are used to detect abnormal operation of dynamic processes and diagnose sensor and actuator faults. The method is...
Show moreHidden Markov Models (HMM) are used to detect abnormal operation of dynamic processes and diagnose sensor and actuator faults. The method is illustrated by monitoring the operation of a pasteurization plant and diagnosing causes of abnormal operation. Process data collected under the influence of faults of different magnitude and duration in sensors and actuators are used to illustrate the use of HMM in the detection and diagnosis of process faults. Case studies with experimental data from a high-temperature-short-time pasteurization system showed that HMM can diagnose the faults with certain characteristics such as fault duration and magnitude.
Endnote format citation
Show less
- Title
- Overview of Higgs results from CMS, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
- Creator
- Merkel, Petra
- Date
- 2013-09-15, 2013-09-15
- Publisher
- IIT Press
- Description
-
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
In this article we present an overview of...
Show moreSponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
In this article we present an overview of Higgs boson results from the CMS Collaboration as presented at the ISMD13 conference.
Show less
- Title
- NON-LINEAR CREEP-RELAXATION CONSTITUTIVE MODEL FOR PLAIN CONCRETE WITH ANISOTROPIC DAMAGE
- Creator
- Teran Torres, Bernardo
- Date
- 2016, 2016-05
- Description
-
A thermodynamic constitutive model for plain concrete, and other quasi-brittle materials, is developed. The model accounts for the anisotropic...
Show moreA thermodynamic constitutive model for plain concrete, and other quasi-brittle materials, is developed. The model accounts for the anisotropic damage-induced and the aging viscoelasticity of the material. The model is based on the theory of solidi cation proposed by Baºant and the continuum damage mechanics theory. The material is considered to be a viscoelastic-damageable material. The Helmholtz free energy utilized in the formulation is treated by means of the representation theorem of coupled damage-strain tensors. The model is capable of analyzing time-dependent damage (tertiary creep) under constant loading and damage due to cyclic creep. Two simple but practical examples are presented in order to illustrate the applicability of the model. The determination of the functions and constants representing the material behavior as well as any experimental companion is proposed for the continuation of the research.
Ph.D. in Civil Engineering, May 2016
Show less
- Title
- SYNTHESIS OF NANOPLATE STRUCTURES IN NI-BASED ALLOYS VIA DISCONTINUOUS PRECIPITATION
- Creator
- Zhou, Yang
- Date
- 2017, 2017-07
- Description
-
Nanostructured materials are of increasing interest due to their potential for use in numerous applications including catalysis and filtration...
Show moreNanostructured materials are of increasing interest due to their potential for use in numerous applications including catalysis and filtration. Methods of synthesizing nanomaterials often include chemical techniques producing individual particles, which gives rise to issues of agglomeration and containment, and the processes are difficult to scale-up. This work is directed at addressing issues of the occurrence and kinetics of self-assembly and structural alignment of nanostructures, which involves the discontinuous precipitation transformation followed by selective dissolution. This synthesis method has been demonstrated using a Ni-49at.%Co-12at.%Al alloy. A complete discontinuous transformation in the Ni 49-12 alloy can be achieved in times as short as 30min. Thus, the large-scale production of such structures is feasible using conventional heat treatment facilities. The synthesis technique is generally applicable to any alloy system in which DP goes to completion and one phase can be selectively removed. The nanoplates are self-assembled, self-supported and well aligned if the precipitate is coherent with the matrix. In order to control the process it is necessary to understand the phase equilibria involving γ, γ′ and β phases in the Al-Co-Ni system. This has been investigated both experimentally and computationally. The isothermal sections at 1100°C and 800°C as well as a partial liquidus projection were determined which result in modifications to previously published work. Comparing the experimental results with the calculated results using Thermo-Calc (TCNI8), there is reasonable agreement. The predicted separation of the γ phase into a two-phase ferromagnetic and paramagnetic region has never been observed experimentally in this or other published work. Future work should explore the ferromagnetic and paramagnetic phase separation as predicted using Thermo-Calc to verify its occurrence in this system. The nanostructured material produced by complete DP transformation may have interesting mechanical properties and these have been studied to a limited extent in this work. The hardness tests show that with decreasing annealing temperature to 600°C, the hardness of certain samples increases significantly due to the precipitation of second phase. The tensile and creep properties of alloy samples with DP phase present were also investigated. The results imply that the occurrence of DP will have a favorable effect on the tensile strength of the sample while lowering the ductility at the same time. A method to generate serrated grain boundaries based on the DP transformation is proposed. Such structures are expected to increase the creep resistance. This was found to be the case in a limited temperature and loading range. Higher temperature or stress levels lead to DP occurrence and cause negative effects on the creep resistance compared to conventionally processed material. The Curie temperature in the Al-Co-Ni alloy system was also studied and determined using a combined magnetic TG and DSC method. A ternary contour map of the Curie temperature has been constructed. From the contour map, the Curie temperature was seen to decrease from high Co, low Al content samples to low Co, high Al samples bypassing a platform at mid Co content. A nonlinear surface fitting was made through a Exponential2D model, the function is helpful for the prediction of Curie temperature of γ phase in Al-Co-Ni alloy system. This method also provides a novel idea of detecting phase transformation and precipitation through thermo-magnetically analyzing the magnetic behavior of the alloys.
Ph.D. in Materials Science and Engineering, July 2017
Show less
- Title
- Planning for Human Implantation of a Cortical Visual Prosthesis (sequence unknown), IPRO 334 - Deliverables: IPRO 334 Midterm Presentation F09
- Creator
- Bern, David, Chen, Shanyl, Deroo, Mary, Gorski, David, Kelly, Thomas, Leasenby, Alex, Li, Zhi, Pyrkh, Hanna, Subhani, Maham, Taneja, Aanchal
- Date
- 2009-12
- Description
-
The Intracortical Visual Prosthesis is based upon that concept that by implanting a large number of subminiature electrodes within the human...
Show moreThe Intracortical Visual Prosthesis is based upon that concept that by implanting a large number of subminiature electrodes within the human visual cortex, coordinated temporal-spatial image information can be artificially communicated to the human visual cortex in the form of electrical currents, acting as a sensory substitute for normal vision.
Sponsorship: IIT Laboratory of Neural Prosthetic Research
Deliverables for IPRO 334: Planning for Human Implantation of a Cortical Visual Prosthesis for the fall 2009 semester
Show less
- Title
- MANAGING STOCHASTIC WIND POWER GENERATION BY INCORPORATING DEMAND RESPONSE IN DAY-AHEAD SCHEDULING
- Creator
- Al Hassan, Hassan
- Date
- 2015, 2015-05
- Description
-
This thesis proposes a stochastic algorithm for managing the variability of wind energy by incorporating hourly demand response in the day...
Show moreThis thesis proposes a stochastic algorithm for managing the variability of wind energy by incorporating hourly demand response in the day-ahead scheduling in power systems. Monte Carlo simulation with Latin hypercube sampling technique is applied to represent the uncertainties of wind energy via different wind scenarios. Demand response has several physical and operating constraints to be considered into the stochastic security-constrained unit commitment (SCUC) for economic, reliability, and security purposes. Benders decomposition method is applied to decompose the large-scale complex stochastic SCUC problem into several tractable problems. Different case studies are analyzed in this thesis to demonstrate the benefits of applying DR to the proposed day-ahead scheduling model with variable wind energy.
M.S. in Electrical Engineering, May 2015
Show less
- Title
- VIEW SYNTHESIS OF THREE DIMENSIONAL VIDEOS USING VIDEO PLUS DEPTH
- Creator
- Loghman, Maziar
- Date
- 2012-07-02, 2012-05
- Description
-
This thesis investigates the use of segmentation in view synthesis for three- dimensional video. View synthesis is the process of generating...
Show moreThis thesis investigates the use of segmentation in view synthesis for three- dimensional video. View synthesis is the process of generating novel views of a scene, using set of views as the reference. Recently, several techniques have been suggested that use the depth maps for rendering virtual views. However, inaccuracy in depth maps causes annoying visual artifacts in depth-based view synthesis. This thesis presents an e cient depth image-based rendering technique based on segmentation using multi-level thresholding. In the proposed algorithm, rst all the images are segmented according to the depth and the pixels belonging to di erent objects are warped and blended independently. Based on multi-level thresholding, an algorithm for nding the ghost contour pixels is provided which simpli es the computations. A novel method for inpainting for disocclusions is introduced which uses the segmented images to nd the associated background boundary pixels. The experimental results show that the proposed algorithm improves the PSNR of the synthesized views up to 0:68 dB for the multi-view video test sequences and eliminates the annoying artifacts.
M.S. in Electrical Engineering, May 2012
Show less
- Title
- Sloan Valve Company (sequence unknown), IPRO 306 - Deliverables: IPRO 306 Midterm Presentation F09
- Creator
- Delahanty, Sean, Jaouen, Julien, Thakkar, Hetul, Jones, Santiago Guerrero, Kim, Sung, Toor, Hammad, Jalan, Arjun, Soleja, Sikander, Zhang, Yayan
- Date
- 2009-12
- Description
-
Sloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to...
Show moreSloan Valve manufactures and distributes commercial valves and plumbing fixtures globally. The IPRO team will work to improve the 'procure to pay' process and also assist in the development of a new warehouse management module.
Sponsorship: Sloan Valve Company
Deliverables for IPRO 306: Sloan Valve for the fall 2009 semester.
Show less
- Title
- MULTIMODAL NEUROIMAGING IN BLAST INDUCED TRAUMATIC BRAIN INJURY
- Creator
- Stout, Jeffrey
- Date
- 2015, 2015-12
- Description
-
Recent military conflicts in Iraq and Afghanistan have resulted in an increase in the number of blast related traumatic brain injury (TBI)...
Show moreRecent military conflicts in Iraq and Afghanistan have resulted in an increase in the number of blast related traumatic brain injury (TBI) cases, currently estimated in excess of 300,000. Current neuroimaging methods, including MRI and CT, are generally not sensitive enough to diagnose blast TBL This research represents several advancements in the understanding of long-term TBI related changes as well as imaging comorbid neurocognitive deficits and psychopathologies. The multi modal approach was taken to leverage the differing sensitivities of each imagmg modality to better identify neuroimaging changes associated with blast TBL T l-weighted MRI was utilized to assess cortical thickness reduction in the TBI subjects, resulting in right temporal lobe decreases that were associated with posttraumatic stress disorder (PTSD) and neurobehavioral symptom indices. Utilizing positron emission tomography (PET), several areas of metabolic change were associated with blast TBI, PTSD, repetitive head injury, and TBI severity. Functional MRI was used to assess working memory deficit, demonstrating relatively normal function in the mild TBI subject, except for at higher cognitive loads; whereas the moderate TBI subjects demonstrated a trend of dysfunction at most levels of cognitive load. Fractional anisotropy (FA) changes were assessed using diffusion tensor imaging, however there was no resulting statistical significance due to differences in the locations of single subject FA changes that could not be realized at the group level using standard analyses. Investigation into multimodal searchlight to integrate the sensitivities of each imaging modality into a single statistical measure, provided enhanced sensitivity to TBI-induced changes in neuroimaging versus single modal searchlight and identified several clusters of change most notably in the cerebellum, temporal lobes, brainstem, and internal capsule. Through a multimodal approach we have shown several areas of damage and dysfunction associated with blast TBI in subjects greater than one year post injury. This research is important due to the large numbers of subjects currently experiencing long-term post concussive symptoms. Our findings show that both TBI and PTSD playa large role in the changes identified on neuroimaging. This research can provide information to assist in the understanding , diagnosis , and treatment of blast TBI.
Ph.D. in Biomedical Engineering, December 2015
Show less
- Title
- Pressure Sensitive Paint Demonstrates Relationship Between Ejector Wall Pressure and Aerodynamic Performance
- Creator
- Taghavi, R., Raman, G., Bencic, T.
- Date
- 1999-05
- Publisher
- Springer Verlag
- Description
-
This paper provides an example of the application of Pressure Sensitive Paint (PSP) to complex internal suspersonic flows and demonstrates the...
Show moreThis paper provides an example of the application of Pressure Sensitive Paint (PSP) to complex internal suspersonic flows and demonstrates the relationship between ejector wall pressure and aerodynamic performance. Details of such jet mixer-ejector nozzles are relevant to jet noise reduction programs. Several ejector configurations with straight, convergent, and divergent side walls were used in our experiments. The side-wall that was painted with PSP was also instrumented with an array of 156 pressure taps connected to Electronically Scanned Pressure (ESP) modules, enabling simultaneous measurement of "true" reference pressures. The PSP results agreed very well with the "true" reference pressures and also provided a detailed map of the complicated pressure patterns that could not be detected using the pressure taps. Finally, we also demonstrated the direct relationship between ejector side-wall pressure distribution and ejector performance characteristics such as exit mean flow uniformity, pumping, and thrust augmentation.
Show less
- Title
- HOW HOSTILE CRITICISM RELATES TO HEALTH FUNCTIONING AND MARITAL ADJUSTMENT IN PATIENTS WITH CARDIOVASCULAR DISEASE AND THEIR PARTNERS
- Creator
- Hicks Iii, R. Elliott
- Date
- 2012-04-30, 2012-05
- Description
-
Destructive communication and hostile interactions between spouses has been found to elicit large increases in systolic blood pressure, heart...
Show moreDestructive communication and hostile interactions between spouses has been found to elicit large increases in systolic blood pressure, heart rate, and cardiac output in patients (Nealey-Moore et al., 2007; Smith et al., 2009). This negatively impacts the cardiovascular health of the receiving partner. The present study was designed to assess the relationship between hostile criticism and patient report of marital satisfaction, physical health, and depressive symptomatology in a sample of couples participating in a cardiac risk reduction intervention. The current study uses archival data obtained during the Partners for Life cardiac risk reduction intervention for couples (Sher et al., 2002). Additionally, further observationally coded data was collected from video taped conversations recorded for the purposes of the Partners for Life study. Pearson correlation analyses indicate moderate negative relationships between Criticism and Marital Adjustment. Implications of these and other results are discussed.
M.S. in Clinical Psychology, May 2012
Show less