Search results

Title: SPATIO-TEMPORAL RECONSTRUCTION FOR GATED CARDIAC SPECT
Creator: Niu, Xiaofeng
Date: 2011-07, 2011-07
Description: In myocardial perfusion imaging using single photon emission computed tomography (SPECT), gated acquisition is often used in order to deal...
Show moreIn myocardial perfusion imaging using single photon emission computed tomography (SPECT), gated acquisition is often used in order to deal with blur caused by cardiac motion in the resulting images. While this can provide useful information about the myocardial function, it also inevitably leads to reduced signal-to-noise ratio in the acquired data due to gating. In this work, we aim to investigate and evaluate image reconstruction methods for improving the quality of the reconstructed images in cardiac gated SPECT imaging. First, we propose a spatio-temporal (aka 4D) reconstruction procedure for gated images based on use of discrete Fourier transform (DFT) basis functions, wherein the image activity at each spatial location is regulated by a Fourier representation along the gate dimension. The gated images are then reconstructed through determination of the coefficients of the Fourier representation. We explore two different reconstruction algorithms, one is a penalized least-square approach and the other is a maximum a posteriori approach. Our simulation results demonstrate that use of DFT-basis functions in gated imaging can improve the accuracy of the reconstruction. While in gated imaging the tracer distribution is traditionally treated as constant, a recent development is gated dynamic imaging where the goal is to obtain an image sequence from a single acquisition which shows simultaneously both cardiac motion and tracer distribution change over the course of imaging. In this work, we further develop and demonstrate a fully 5D (3D space plus time plus gate) reconstruction procedure for cardiac gated, dynamic SPECT imaging, where the challenge is even greater without the use of multiple fast camera rotations. We develop and compare two iterative reconstruction algorithms: one is based on the modified block sequential regularized EM (BSREM-II) algorithm, and the other is based on the Bsplines algorithm. Our simulation results demonstrate that the 5D reconstruction xiii procedure can yield gated dynamic images which show quantitative information for both perfusion defect detection and cardiac motion. Based upon the success of 5D reconstruction, we also study the saliency of 5D images for detection of perfusion defects. We explore efficient ways for characterization and visualization of information pertinent to perfusion defects in a 5D image sequence. We apply various metrics to quantify the degree to which perfusion deficits can be detected. We show that these metrics can be used to produce new types of visualizations, showing wall motion and perfusion information, that may potentially be useful for clinical evaluation. Finally, with the ultimate goal of effective detection of lesion defect for clinical use, we also investigate a direct reconstruction approach to determine a sequence of gated, kinetic parameter images from a single acquisition, which can provide information simultaneously for both tracer kinetics and wall motion. To combat the greatly under-determined nature of the problem, we apply smoothness constraints to exploit the similarity both among the different gates and among the local spatial neighborhood. The parameter images of the different gates are then determined jointly using maximum a posteriori estimation from all the available image data.
Ph.D. in Electrical Engineering, July 2011
Show less

Title: INVOLVEMENT OF MIR-182 IN THE ACTION OF ATORVASTATIN IN PROSTATE CANCER CELLS
Creator: Li, Wenping
Date: 2013-04-10, 2013-05
Description: Atorvastatin (ATO), a widely used statin for lowering cholesterol was examined for its chemopreventive/therapeutic activities in prostate...
Show moreAtorvastatin (ATO), a widely used statin for lowering cholesterol was examined for its chemopreventive/therapeutic activities in prostate cancer cells. We found that ATO inhibited cell proliferation and induced autophagy in PC3 prostate cancer cells, as marked by significant induction of an autophagy marker LC3-II. Using Taqman RT-PCR technique, we also found that ATO treatment for 24h and 48h consistently up-regulated miR-182 in PC3 cells. However, adding geranylgeraniol (GGOH) to the culture media reversed the effect of ATO in regulating miR-182, suggesting that ATO up-regulates miR-182 through inhibition of geranylgeranyl biosynthesis. Overexpression of miR-182 in PC3 cells significantly decreased cell proliferation by about 36% (MTT assay), while knock-down of miR-182 stimulated cell proliferation by about 43% (MTT assay). In screening for miR-182 target genes, we found that Bcl2 and p21 are potential miR-182 target genes; Bcl2 was significantly down-regulated by ATO at both mRNA and protein levels and miR-182 knock-down up-regulated Bcl2 protein; p21 protein expression was positively correlated with alteration of miR-182 expression levels in PC3 cells. Through screening database of miR-182 target genes from TargetScanHuman 6.2 and PicTar, we found that p21 is not the direct target gene of miR-182, so it could be regulated by miR-182 indirectly. It has recently been established that miR-182 regulation is p53-dependent, since PC3 cells are p53 negative, it is clear that ATO regulates miR-182 in a p53-independent manner. These data demonstrate that miR-182 up-regulation and Bcl2 down-regulation by ATO could be two independent events and both could be involved in ATO mediated cell proliferation and autophagy.
M.S. in Biology, May 2013
Show less

Title: Study of automatic electric fire pumps
Creator: Ross, L. R., Ballard, L. E., Swearingen, R.e.
Date: 2009, 1906
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofautomatic00ross
Thesis (B.S.)--Armour Institute of Technology

Title: Physics implications of correlation data from the RHIC and LHC heavy-ion programs, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
Creator: Ray, R. L.
Date: 2013-09-15, 2013-09-15
Publisher: IIT Press
Description: Two-dimensional angular correlation data from the STAR experiment at RHIC and from the LHC experiments provide critical information about...
Show moreTwo-dimensional angular correlation data from the STAR experiment at RHIC and from the LHC experiments provide critical information about dynamical processes in relativistic heavy-ion collisions. The principal correlation structures of interest are a broad jet-related peak at small relative azimuth (φ) extending to large relative pseudorapidity (η), the dijet ridge at large relative azimuth, and an independent double ridge on φ represented by a quadrupole function. The broad peak at small relative azimuth has been attributed, in large part, to initial-state fluctuations and hydrodynamic flow which produce higher-order harmonics on φ. That conjecture is challenged in this paper. It is shown that the net effect of additional higher harmonic model elements is to describe small, non-Gaussian (NG) shapes in the broad jet-related peak. The quadrupole correlation, which is also conventionally attributed to hydrodynamic flow, is considered within the Balitsky - Fadin - Kuraev - Lipatov (BFKL) Pomeron framework. Preliminary results using this model for the quadrupole correlation for particle production from 200 GeV p + p collisions are shown to be consistent with recent data from STAR.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less

Title: EFFECT OF TEMPERATURE, MOISTURE CONTENT AND SOIL SURFACE AREA ON THE BIOLOGICAL DEGRADATION OF BIOSOLIDS ADDED TO SOIL
Creator: Wen, Dongqi
Date: 2016, 2016-05
Description: The objective is to develop and apply an organic matter degradation model (OMDM) that predicts changes in the biological degradation of...
Show moreThe objective is to develop and apply an organic matter degradation model (OMDM) that predicts changes in the biological degradation of organic matter added to soils as a function of soil temperature, moisture content and mineral surface area using data from field and laboratory measurements. A one year long laboratory study was conducted to determine biosolids microbial degradation rates (21 ˚C and 20% moisture content) for soils from eight different fields Biosolids microbial degradation rates were also determined for the eight soils under field condition (10 ˚C and 10% moisture content) by applying a degradation rate model (DRM). The total mineral surface areas for 27 soil samples were also determined. Regression analysis revealed that the degradation rate was positively associated with mineral soil surface area (R2=0.85) and that the biosolids application rate is not significantly associated with the biosolids degradation rate (p value =0.35>0.01). The OMDM determines a decomposition rate of 1.04 yr-1 at 30 ˚C, 20% moisture content, and 10 m2/g soil and provides correction factors for changes in soil temperature, moisture, and mineral surface area. The model predicted in changes of the biological degradation rate of biosolids added to soils with mineral surface areas that vary from 1 to 10 m2/g soil under laboratory and field conditions. A comparison of the measured and simulated degradation rates for eight different soils produced R2 = 0.87 for field data. The model was also able to predict the degradation rate of biosolids for 19 additional soils under field conditions (R2=0.89). The model was also applied to agricultural plant litter. The estimated degradation rates are 0.45 yr-1 corn stover, 0.35 yr-1 oats, 0.26 yr-1 wheat, and 0.13 yr-1 millet at 30 ˚C, 20% moisture content and 10 m2/g. This study demonstrates that the effects of environmental conditions and soil mineral surface area have a significant impact on degradation rates of organic matter and must be considered when assessing degradation rates for organic matter added to soil. Higher temperatures and moisture content and finer soils are related to larger degradation rates.
Ph.D. in Environmental Engineering, May 2016
Show less

Title: A test of a commutating rectifier
Creator: Watt, William T., Stryker, Clinton E.
Date: 2009, 1917
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testofcommutatin00watt
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaf 75

Title: AN ASSESSMENT OF HEAT PUMP APPLICATION AT WATER TREATMENT FACILITIES-THAT USE SURFACE WATER
Creator: Yan, Wenpeng
Date: 2012-07-17, 2012-07
Description: Energy-efficient heat pumps have been applied in the United States and other regions of the world for decades. Geothermal heat pumps have been...
Show moreEnergy-efficient heat pumps have been applied in the United States and other regions of the world for decades. Geothermal heat pumps have been used, but their application is not wide spread due to the high cost of drilling and installing a ground loop. An alternative choice for space conditioning at municipal water utilities is a surface water source heat pump. Because treated surface water is readily available and it exists in a relatively narrow temperature range it could be useful heat transfer fluid. In this project the economic benefits and greenhouse gas emissions of a heat pump system for a building in NE Illinois are analyzed. Heating and cooling requirements for a hypothetical a 1000 m2 space at a drinking water treatment plant are considered. The analysis includes initial, operating and maintenance costs as well as greenhouse gas emissions, between a heat pump system and a conventional natural gas furnace and air-conditioner. The cost savings in this project for the heat pump system were from $39900 to $41511 over the life cycle of the system depending on the different efficiency level of the heat pump system. Surprisingly the initial cost of the standard efficiency heat pump system is lower than the conventional NGAC system. There is no need to take time to make up the additional initial cost. Surface water heat pumps operating at different efficiency level produce less greenhouse gas than the conventional NGAC system. The CO2 emission reduction could be as high as 73%.
M.S. in Environmental Engineering, July 2012
Show less

Title: Using Mitsimlab to Generate Dynamic Traffic for NS2 Simulation of Vanet
Creator: Diao, Zhaoshi
Date: 2011-04-25, 2011-05
Description: The vehicular ad hoc network (VANET) has attracted a lot of attentions due to their interesting and promising functionalities including...
Show moreThe vehicular ad hoc network (VANET) has attracted a lot of attentions due to their interesting and promising functionalities including vehicular safety, traffic congestion avoidance, and location based services. However, using a real VANET to do these researches costs too much. Simulation of VANET is useful and could solve this problem well. Nevertheless, many simulations of VANET base on simple road networks and relatively simple mobility models. Based on this road networks and mobility models, consequently, the results of simulation of VANET would be impractical and inaccurate. Therefore, MITSIMLAB which is a simulation of transportation system developed by Massachusetts Institution of Technology Intelligent Transportation System Program is introduced. In MITSIMLAB, a real world road network could be generated. Moreover, the mobility models in MITSIMLAB are more practical. However, MITSIMLAB is a simulation of transportation system. It cannot be used to simulate the VANET directly, while NS2 could simulate VANET properly. NS2 is an open sourced and free software, and it is widely used and successfully simulates plenty of situations in the wireless environment. It could well simulate the communication protocols and applications of VANET. But it cannot generate road network and mobility models to simulate a practical traffic by itself. As a result, it is important to incorporate MITSIMLAB by using its practical road network and mobility models with NS2. In the thesis, a method about how to translate the output file of MITSIMLAB into the format of NS2 would be proposed. In addition, a road network based on IIT main campus is generated by using MITSIMLAB. After translating it into the format usable by NS2, a VANET based on the map of IIT main campus and practical mobility models could be simulated.
M.S. in Electrical Engineering, May 2011
Show less

Title: IMPROVED DYNAMIC CONTRAST ENHANCED MR IMAGING WITH AN APPLICATION TO PROSTATE CANCER LOCALIZATION
Creator: Afshar, Niloufar Totonchi
Date: 2011-07, 2011-07
Description: Prostate cancer is one of the most frequently detected cancers and a leading cause of death for men in the United States. Fortunately, chances...
Show moreProstate cancer is one of the most frequently detected cancers and a leading cause of death for men in the United States. Fortunately, chances of successful treatment significantly improve when prostate cancer is diagnosed at an early stage. An accurate and reliable imaging technique that can localize tumors is very valuable for example in guiding needle biopsy, therapy, as well as surgery. Current imaging techniques such as ultrasound provide unsatisfactory result for tumor localization. Therefore, Multispectral Magnetic Resonance Imaging (MRI) emerged as an alternative method of imaging for prostate cancer. An important part of multispectral MRI is Dynamic contrast enhanced MRI (DCE-MRI). Traditionally, a compartmental model is used with DCE-MRI to estimate parametric images. However these images are usually very noisy. Therefore, we propose to use directly the series of DCE-MRI for tumor localization instead of the pharmacokinetic parameters which are derived from DCE MR images through a compartmental model. As a second contribution, we have developed new features in addition to traditional parameters based on different characteristic of tumor and normal pixels. These new features are standard deviation and the energy of the first half of the spectrum divided by the energy of the second half of the spectrum based on an analysis of TACs for tumor and normal pixels. We use quantitative and qualitative evaluation methods to demonstrate that employing DCE-MRI directly as features and our proposed features result in an improvement in terms of tumor localization performance.
M.S. in Electrical Engineering, July 2011
Show less

Title: Impacts of Sulfur Capture Technology in Coal Power Plants (sequence unknown), IPRO 302 - Deliverables: IPRO 302 Final Report F09
Creator: Contreras, Abraham, Dickman, Justin, Enadeghe, Gregory, Garcia Rodriguez, Hector, Haddad, Michael, Kyle, Ryan, Mongillo, Michael, Murphy, Ryan, Shonubi, Oluwaseun, Swillum, Bryce, Wolber, Brian, Worthon, Terrika
Date: 2009-12
Description: The IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United...
Show moreThe IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United States. It planned to use this knowledge to determine which sulfur capture technologies produce the greatest benefit for industry and society and to find the marketability of the sulfur byproducts created in these power plants.
Sponsorship: Sargent & Lundy, LLC
These are the deliverables for IPRO 302: Impacts of Sulfur Capture Technology in Coal Power Plants from the Fall 2009 semester.
Show less

Title: INSTANTANEOUS DETECTION OF SPATIAL GRADIENT ERRORS IN DIFFERENTIAL GNSS
Creator: Jing, Jing
Date: 2014, 2014-12
Description: Differential GNSS (Global Navigation Satellite System) is currently being ex- tended using a high integrity Ground Based Augmentation System ...
Show moreDifferential GNSS (Global Navigation Satellite System) is currently being ex- tended using a high integrity Ground Based Augmentation System (GBAS) to enable civil aircraft precision approach and landing. Differential GPS carrier phase measure- ments between ground-based GBAS reference antennas can provide the means to de- tect and isolate certain signal-in-space (SIS) failures and anomalies that are hazardous to aircraft, most notably ionospheric anomalies and ephemeris failures, which can be characterized as spatial range error gradients. In this research, we develop a monitor capable of instantaneously detecting multi-dimensional spatial gradient faults. The existence of large gradients, while rare, has prompted the development of numerous ground monitors for their detection. One drawback of previously proposed monitors is that their performance for a given ground antenna con guration is de- pendent on how antennas are paired to form measurement differences. In contrast, in this work a new monitor approach is developed to provide consistent detection performance, regardless of how the antennas are paired, by combining measurements from multiple, spatially separated ground antennas through a null space transforma- tion. It is shown that the `null space' monitor signi cantly improves the detection performance over existing fault detection algorithms and enables GBAS to support Category III precision approach and landing. The instantaneous carrier phase monitor cannot detect all gradients due to the presence of integer cycle ambiguities. These ambiguities cannot be resolved because the gradient magnitude is unknown a priori. Furthermore, it has been shown that the performance of such monitors is highly dependent on the reference antenna topol- ogy. The range of detectable gradients for all carrier phase monitors depends on two factors: the number of antennas and their con guration. One can always expand the detection range by using many antennas, but only at greatly increased operational cost. Optimizing antenna con guration has been overlooked as a means to improve performance; simple, heuristic arguments typically prevail in the associated siting decisions. For example, when given four antennas it is generally assumed that they should be sited in a square arrangement to balance performance in all directions. However, such heuristics do not provide the maximum detectable range of gradients, and exploiting the freedom to choose the antenna topology can dramatically expand the detectable range. Due to the presence of carrier phase cycle ambiguities, the re- sulting optimization problem is a constrained, mixed integer nonlinear programming problem. By solving the nonlinear program, the optimal GBAS antenna topology that maximizes the range of detectable gradients can be found for any number of antennas. For ionospheric fronts, the magnitude of the resulting gradient is bounded. However, orbit ephemeris faults can be arbitrarily large. The monitor must be able to detect all large gradients. To detect gradients beyond the capability of the car- rier phase monitor, code phase measurements are integrated into the monitor. Al- though we show this allows for the detection of all gradients, the number and spacing of ground antennas may not be suitable for all ground stations. Therefore, dual frequency carrier phase measurements are also considered to reduce the number of antennas required to achieve the desired detection performance. Finally, a search algorithm is developed to nd the antenna topology that enables the null space mon- itor to detect all hazardous gradients using code and dual frequency carrier phase measurements.
Ph.D. in Mechanical and Aerospace Engineering, December 2014
Show less

Title: CHANGES OF BACTERIAL SPECIES AND HEME PROTEIN OCCURRENCE IN ACTIVATED SLUDGE COMMUNITIES CULTURED IN THE LABORATORY
Creator: Wang, Xiaomeng
Date: 2016, 2016-05
Description: An activated sludge sample that had originally been collected from an aeration tank of the Stickney wastewater treatment plant in Chicago, and...
Show moreAn activated sludge sample that had originally been collected from an aeration tank of the Stickney wastewater treatment plant in Chicago, and had previously been cultured at low dissolved oxygen (DO) for 48 weekly passages was used as starting material for continuation of the low DO acclimation. The culture was continued at low dissolved oxygen in synthetic wastewater for 25 additional weekly passages to study what would happen to the activated sludge if the low DO continued. In order to do that, some important data were measured during the culture, including the specific oxygen uptake rates (SOUR) which could reflect the ability of oxygen utilization, 16S rDNA information which could tell the community diversity of sludge, and the dominant species genome data which suggested what really happened to the sludge and some reasons. The results showed that SOUR decreased modestly during the course of low DO adaptation, which was contrary to the results of the previous study. There were significant changes in community structure with respect to bacterial species during the first fifteen additional passages. Species known to produce both flavohemoglobins (FHbs) and truncated hemoglobins (trHbs) were common at all passages tested, although the dominant species were totally different from passage to passage. Specifically, during the course of the experiment, the frequency of cells encoding an FHb decreased substantially, from 84% to 50%, while the percentage of cells encoding a trHb decreased slightly from 84% to 78%. The overall content in the culture of heme b (the heme type found in bacterial hemoglobins) decreased, however, during continuation of the low DO conditions. So it is indicated that the oxygen utilization ability of the activated sludge does not increase all the time.
M.S. in Biology, May 2016
Show less

Title: Widget Applications to Enhance the Tru2Way Consumer Experience (sequence unknown), IPRO 312 - Deliverables: IPRO 312 IPRO Day Presentation F09
Creator: Alsharief, Yagoob, Aulfata, Muluken, Curtis, Christopher, Dhewaju, Anusuya, Mooney, Kevin, Mutyaba, Kevin, Ndoping, Marco, Onaissi, Samah, Peterson, Naomi, Siwek, Steven, Wallace, Sean, Yi, Won-jae
Date: 2009-12
Description: The IPRO teams objectives are to provide Comcast with feedback from an outside perspective, allowing them to see where their Tru2Way system...
Show moreThe IPRO teams objectives are to provide Comcast with feedback from an outside perspective, allowing them to see where their Tru2Way system needs additional attention or support.
Sponsorship: Comcast
Deliverables for IPRO 312: Widget Applications to Enhance the Tru2Way Consumer Experience for the fall 2009 semester
Show less

Title: COMPUTATION AND ANALYSIS OF TUMOR GROWTH
Creator: Turian, Emma
Date: 2016, 2016-05
Description: The ability of tumors to metastasize is preceded by morphological instabilities such as chains or fingers that invade the host environment....
Show moreThe ability of tumors to metastasize is preceded by morphological instabilities such as chains or fingers that invade the host environment. Parameters that control tumor morphology may also contribute to its invasive ability. In this thesis, we investigate tumor growth using a two-phase Stokes model. We first examine the morphological changes using the surface energy of the tumor-host interface and investigate its nonlinear dynamics using a boundary integral method. In an effort to understand the interface stiffness, we then model the tumor-host interface as an elastic membrane governed by the Helfrich bending energy. Using an energy variation approach, we derive a modified Young-Laplace condition for the stress jump across the interface, and perform a linear stability analysis to evaluate the effects of viscosity, bending rigidity, and apoptosis on tumor morphology. Results show that increased bending rigidity versus mitosis rate contributes to a more stable growth. On the other hand, increased tumor viscosity or apoptosis may lead to an invasive fingering morphology. Comparison with experimental data on glioblastoma spheroids shows good agreement especially for tumors with high adhesion and low proliferation. Next, we evaluate tumor regression during cancer therapy by a combined modality involving chemotherapy and radiotherapy. The goal is to address the complexities of a vascular tumor (e.g. apoptosis and vascularization) during treatment. We introduce an apoptotic time delay and study its impact on tumor regression using numerical and asymptotic techniques. In particular, we implement the linear-quadratic model and identify two extreme sets of parameter data, namely the slow, and fast tumor response to therapy. Numerical simulations for the slow response set show good agreements with data representing non-small cell lung carcinoma. Using the evolution equation for tumor radius with time delay, we find that tumors with shorter time interval to the onset of apoptosis shrink faster.
Ph.D. in Applied Mathematics, May 2016
Show less

Title: Monitoring of multivariable dynamic processes and sensor auditing
Creator: Negiz, A., Cinar, A.
Date: 1998-10
Publisher: ELSEVIER SCI LTD
Description: Industrial continuous processes are usually operated under closed-loop control, yielding process measurements that are autocorrelated, cross...
Show moreIndustrial continuous processes are usually operated under closed-loop control, yielding process measurements that are autocorrelated, cross correlated, and collinear. A statistical process monitoring (SPM) method based on state variables is introduced to monitor such processes. The statistical model that describes the in-control variability is based on a canonical variate (CV) state space model. The CV state variables are linear combinations of the past process measurements which explain the variability of the future measurements the most, and they are regarded as the principal dynamic dimensions. A T-2 statistic based on the CV state variables is utilized for developing the SPM procedure. The CV state variables are also used for monitoring sensor reliability. An experimental application to a high temperature short time (HTST) pasteurization process illustrates the proposed methodology.
Endnote format citation
Show less

Title: Large Scale Integration of Sustainable Energy and Congestion Management in Western Interconnection
Creator: Aflaki Khosrosha, Kaveh
Date: 2012-07-12, 2012-07
Description: Large scale sustainable energy like wind and solar energy integration to the bulk grid could introduce inevitable challenges to regional...
Show moreLarge scale sustainable energy like wind and solar energy integration to the bulk grid could introduce inevitable challenges to regional transmission and generation systems. The most important challenges for transmission system are the congestion management and planning for transmission expansion to transfer the zero cost generated electricity. Another big challenge is competition of current fuel based generation units in the electricity market with zero cost sustainable energy. In this dissertation all these challenges identified and analyzed for large scale grid. This thesis brings a new method used to study transmission congestions in Western Interconnection of the United States. The process involved Security-Constrained Unit Commitment (SCUC) formulation applying its results for analysis of transmission congestion. This thesis also presents results and findings in simulation of the system operation in the Western Interconnection of the United States with the inclusion of large scale wind and solar energy integration for year 2030. High level of wind and solar energy with the forecasted wind and solar time series profiles were integrated to the Western Interconnection grid. Their impact on different existing types of generation plants is studied. The sensitivity of the fuel prices, wind turbine power output, load volatility and demand side management as well as carbon tax are analyzed in different possible scenarios. In order to incorporate large scale of sustainable energy into a bulk electricity grid footprint, planned transmission expansion showed need to take place. Transmission expansion reduces grid congestion and balances Locational Marginal Prices (LMP). This thesis explores the advancements in high-performance computing and visual analytics of economic-based transmission expansion in the Western Electricity Coordinating Council (WECC). This expansion is based on 2018 and 2029 forecasted data. It identifies transmission congestions and average of LMP for each area, and expands the transmission system while accommodating large scale wind and solar energy to achieve the Department of Energy’s renewable energy vision for year 2030. An iterative transmission expansion analysis, based on the average LMP for each area, is used to identify the minimum WECC transmission lines required. All results are visualized on the Geographical Information System (GIS) format map of North America.
Ph.D. in Electrical Engineering, July 2012
Show less

Title: AXISYMMETRICAL JET FORCED BY FUNDAMENTAL AND SUBHARMONIC TONES
Creator: Raman, G, Rice, Ej
Date: 1991-07
Publisher: AMER INST AERONAUT ASTRONAUT
Description: A circular jet was excited simultaneously by two harmonically related tones. The results of this excitation on jet behavior are reported for...
Show moreA circular jet was excited simultaneously by two harmonically related tones. The results of this excitation on jet behavior are reported for three pairs of Strouhal numbers [St(D) = f*D/U(j) = 0.2 and 0.4, 0.3 and 0.6, 0.4 and 0.8]. For each case, the initial phase difference between the two tones was varied in steps of 45 deg for one full cycle, and the amplitude of the fundamental and subharmonic tones was varied independently over the range of 0.1-7.0% of the jet exit velocity. Several results of this study agreed with other published findings, such as a critical amplitude or the fundamental being required for subharmonic augmentation and the initial phase difference being critical in determining whether the subharmonic is augmented or suppressed. In addition, the detailed documentation or several aspects of this phenomenon, measured in the same experimental facility in a controlled manner, brought out two important points that had eluded previous researchers. First, at high levels of the fundamental and subharmonic forcing amplitudes, the subharmonic augmentation is independent of the initial phase difference. Second, two-frequency excitation is indeed more effective than single-frequency excitation in jet mixing enhancement. Higher spreading rates seem to go along with higher subharmonic levels.
Show less

Title: A study of the effects produced on Portland cement by the addition of various percentages of hydrated lime
Creator: Knuepfer, Claude Albert, Hook, Leonard Doolittle
Date: 2009, 1915
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofeffectspr00knue
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaf 99

Title: CORROSION-RESISTANT ELECTRO-CATALYSTS AND SUPPORTS FOR ELECTROCHEMICAL ENERGY CONVERSION
Creator: Wang, Guanxiong
Date: 2016, 2016-12
Description: Polymer electrolyte fuel cells (PEFCs) convert chemical energy of fuels (eg. Hydrogen) directly to electrical energy with excellent power...
Show morePolymer electrolyte fuel cells (PEFCs) convert chemical energy of fuels (eg. Hydrogen) directly to electrical energy with excellent power density, high efficiency, and zero emissions. Several challenges have delayed the commercialization of fuel cells with one being the high cost and durability of the carbon-supported-platinum-based (Pt/C) electrocatalysts. The lifetime/durability issue is critical as insufficient durability/reliability of the catalysts affects the lifetime and economical viability of these devices. Carbon support corrosion is a major durability issue since the corrosion reaction is thermodynamically favorable but kinetically sluggish under normal operating conditions. The potential transients that occur during start and stop in automotive applications can lead to electrode potential excursions of up to 1.5 V and contribute to carbon corrosion. The best way to mitigate support corrosion in PEFCs is to replace the carbon supports with alternatives having high electronic conductivity, surface area and porosity. This dissertation investigates the following carbon alternatives: (i) tin doped indium oxide (ITO) and (ii) 1:1 mixed oxides of ruthenia and silica (RSO). Microstructure characterization and electrochemical evaluations, including accelerated stress tests (start-up/shut-down and load cycling protocols) were performed to evaluate ORR activity, fuel cell performance, and electrochemical stability under PEFC operating conditions. The ITO support and 40%Pt/ITO catalysts demonstrated exceptional electrochemical stability (and reasonable ORR activity) in rotating disk electrode (RDE) experiments under accelerated potential cycling that mimicked automotive drive cycles. However, Pt/ITO exhibited poor performance and stability during MEA evaluation in a PEFC. X-ray photoelectron spectroscopy (XPS) was employed to reveal the degradation modes of Pt/ITO during PEFC operation and it was found that the increase in the surface hydroxide concentration generates a passivating In(OH)3 layer that increases electrode resistance and undermines PEFC performance. The influence of the catalyst support on PEM degradation during PEFC operation was also studied. Rotating ring-disk electrode (RRDE) experiments were employed to estimate the fraction of H2O2 generated during the ORR on the supports (C and RSO) and catalysts (benchmark Pt/C and Pt/RSO). The percentage of H2O2 generated on C and Pt/C was 50% higher than that on RSO and Pt/RSO thus explaining the observed oxidative degradation resistance of the PEM with the latter supports/catalysts.
Ph.D. in Chemical Engineering, December 2016
Show less

Title: A modular simulation package for fed-batch fermentation: penicillin production
Creator: Birol, G., Undey, C., Cinar, A.
Date: 2002-11-15
Publisher: PERGAMON-ELSEVIER SCIENCE LTD
Description: Simulation software based on a detailed unstructured model for penicillin production in a fed-batch fermentor has been developed. The model...
Show moreSimulation software based on a detailed unstructured model for penicillin production in a fed-batch fermentor has been developed. The model extends the mechanistic model of Bajpai and Reuss by adding input variables such as pH, temperature, aeration rate, agitation power, and feed flow rate of substrate and introducing the CO2 evolution term. The simulation package was then used for monitoring and fault diagnosis of a typical penicillin fermentation process. The simulator developed may be used for both research and educational purposes and is available at the web site: http://www.chee.iit.edu/ similar to control/software.html.
Endnote format citation
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of