Search results

Title: Delta Shelter (sequence unknown), IPRO 311 - Deliverables: IPRO 311 IPRO Day Presentation F09
Creator: Schug, Timothy, Bradley, Joshua, Cahan, Noah, Dobbin, Dan, Hallenbeck, Jeff, Jordan, Davyd, Strandquist, Brad, Dohm, Jacob, Hoffman, Kent, Lee, Woong-kyo, Waisath, Nathan
Date: 2009-12
Description: The Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects...
Show moreThe Delta Tau Delta fraternity wants to make their current house as energy efficient and green as possible. The team will look at all aspects of the DTD house and their operations to create a more energy efficient fraternity. During the term, the team will consider possible alternatives to many issues including but not limited to: mechanical heating system, building envelope, thermal properties of buildings perimeter, roofing materials, air infiltration, ventilation, and occupancy trends.
Deliverables for IPRO 311: Delta Shelter for the fall 2009
Show less

Title: FLOW FIELD STRUCTURE AND UNSTEADY AERODYNAMIC LOADS ON AN AIRFOIL IN SURGING FLOW
Creator: Iliev, Simeon Milenov
Date: 2015, 2015-05
Description: Airfoils subject to unsteady freestream velocity as in the case of helicopter rotor blades and vertical axis wind turbines have been observed...
Show moreAirfoils subject to unsteady freestream velocity as in the case of helicopter rotor blades and vertical axis wind turbines have been observed to exhibit very interesting lift behavior. Depending on the frequency of the oscillating freestream velocity, the uctuating lift amplitude can reach values as much as twice of that predicted by a quasi-steady approximation or as low as only one-half of that. Experimental data and analysis presented in this study provide the exact relationship between surging ow frequency and amplitude of the uctuating lift force for a range of reduced fre- quencies between k=0.1 and k=1.5. Furthermore, surface pressure measurements on the suction surface of the airfoil are used to supplement the measured lift force data and provide a measure of the level of unsteady ow e ects. Finally, experimental particle image velocimetry ow eld data is presented for the two surging ow cases corresponding to the maximum and minimum uctuating lift amplitude and is used to extract coherent ow eld structures which are related to the respective lift be- havior. Both the experimental lift force data and ow eld structures are compared to corresponding, low Reynolds number numerical simulation results.
M.S. in Mechanical and Aerospace Engineering, May 2015
Show less

Title: BROAD AND NARROW PERSONALITY TRAITS AS PREDICTORS OF RISKY DRIVING BEHAVIORS
Creator: Watson, Jeremy Beau
Date: 2011-04-05, 2011-05
Description: The accurate prediction of risky driving behaviors or possible accident and injury involvement contains several benefits as even minor...
Show moreThe accurate prediction of risky driving behaviors or possible accident and injury involvement contains several benefits as even minor increases in detection may result in possible avoidance of accidents and loss of life. This study examined the relationship between both broad and narrow personality traits and risky driving behaviors and the role of the bandwidth-fidelity dilemma. Based on archival data, 680 adults from a community sample in the Pacific Northwest completed the 16 Personality Factor Questionnaire (16PF) and a daily behavior inventory of act frequencies. Results indicated that broad and narrow personality traits are equally predictive of risky driving behaviors, but there are some appreciable differences at the primary factor level. Previous research, implications, and limitations to this study are also discussed.
M.S. in Psychology, May 2011
Show less

Title: Jet Impingement Tone Suppression Using Powered Resonance Tubes
Creator: Sarpotdar, Shekhar, Raman, Ganesh, Sharma, S. D., Cain, Alan B.
Date: 2007-05
Publisher: American Inst Aeronaut Astronaut
Description: This work is an experimental study of high subsonic jet impingement tone suppression. We begin by documenting the characteristics of the...
Show moreThis work is an experimental study of high subsonic jet impingement tone suppression. We begin by documenting the characteristics of the impingement tone for various Mach numbers and standoff (nozzle exit to ground plate) distances. The results revealed frequency staging and the presence of two types of impingement tones. A novel feature of our work is the use of four miniature high-frequency actuators known as powered resonance tubes that were located circumferentially around the main jet nozzle. The powered resonance tubes were capable of producing high amplitude acoustic excitation over a range of frequencies, up to 17.5 kHz. Our target excitation frequency range was about 3-5 times that of the natural flow instability. Using high-frequency excitation, tonal suppression levels as high as 20 dB and broadband suppression levels as high as 5-10 dB were obtained. The mass addition rate from the powered resonance tubes was of the order of 2% of the mass flow rate from the main jet. Mass flow reductions could be obtained under conditions when the powered resonance tube resonated strongly. Our results suggest that appropriately designed miniature powered resonance tube actuators have potential for use in flow control applications.
http://dx.doi.org/10.2514/1.15818
Show less

Title: Study and design of tall office building power plant
Creator: Hill, Warren E
Date: 2009, 1905
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studydesignoftal00hill
Thesis (B.S.)--Armour Institute of Technology

Title: Impacts of Sulfur Capture Technology in Coal Power Plants (sequence unknown), IPRO 302 - Deliverables: IPRO 302 Brochure F09
Creator: Contreras, Abraham, Dickman, Justin, Enadeghe, Gregory, Garcia Rodriguez, Hector, Haddad, Michael, Kyle, Ryan, Mongillo, Michael, Murphy, Ryan, Shonubi, Oluwaseun, Swillum, Bryce, Wolber, Brian, Worthon, Terrika
Date: 2009-12
Description: The IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United...
Show moreThe IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United States. It planned to use this knowledge to determine which sulfur capture technologies produce the greatest benefit for industry and society and to find the marketability of the sulfur byproducts created in these power plants.
Sponsorship: Sargent & Lundy, LLC
These are the deliverables for IPRO 302: Impacts of Sulfur Capture Technology in Coal Power Plants from the Fall 2009 semester.
Show less

Title: Test of a Delavergne oil engine
Creator: Sieck, William
Date: 2009, 1911
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/testofdelavergne00siec
Thesis (B.S.)--Armour Institute of Technology, 1911 B.S. in Mechanical Engineering, 1911

Title: ADAPTATION AND RENOVATION OF SCHULZE BAKERY TO A MIXED USE BUILDING: master thesis Final Booklet-wigdan al-guneid
Creator: Al-guneid, Wigdan
Date: 5/2/2011, 2011-05
Description: Holding focus on techinics and strategies of development arc, a landmark building on the south side of Chicago will be re-adapted and...
Show moreHolding focus on techinics and strategies of development arc, a landmark building on the south side of Chicago will be re-adapted and transformed from a bakery to a much needed mixed use building.
Sponsorship: Waldorf, Tyler
Sponsorship: Denison, Dirk
Show less

Title: Measurement of the charged kaon correlations at small relative momentum in the SELEX experiment, Proceedings of the XLIII International Symposium on Multiparticle Dynamics
Creator: Nigmatkulov, Grigory
Date: 2013-09-15, 2013-09-15
Publisher: IIT Press
Description: We report the first measurement of charged kaon Bose–Einstein correlations produced by 600 GeV/c Σ−, π− and 540 GeV/c p beams in the SELEX...
Show moreWe report the first measurement of charged kaon Bose–Einstein correlations produced by 600 GeV/c Σ−, π− and 540 GeV/c p beams in the SELEX experiment. The SELEX (E781) experiment at Fermilab is a fixed target three–stage magnetic spectrometer designed for study hadroproduction at high acceptance for forward interactions (xF ≥ 0.1). One–dimensional charged kaon correlation functions were obtained for all three beams and three pair transverse momentum ranges. The femtoscopic parameters for the radii and correlation strength of the kaon source were extracted. The fit results show the decrease of the emission source radii with the increase of the pair transverse momentum.
Sponsorship: IIT College of Science, High Energy Physics Division of Argonne National Laboratory
Show less

Title: SOCIAL FUNCTIONING AND CORE SYMPTOMATOLOGY AS PREDICTORS OF RESPONSE TO A SUMMER TREATMENT PROGRAM FOR YOUTH WITH COMBINED TYPE ATTENTION DEFICIT HYPERACTIVITY DISORDER
Creator: Uribe, Roberto Alejandro
Date: 2015, 2015-12
Description: The study was a retrospective repeated measures analysis of 108 youth (age 6-12) who took part in the 2008-2012 Camp STAR (Summer Treatment...
Show moreThe study was a retrospective repeated measures analysis of 108 youth (age 6-12) who took part in the 2008-2012 Camp STAR (Summer Treatment Program for ADHD and Related Disorders) Summer Treatment Program. Developed by William E. Pelham in 1980, the Summer Treatment Program (STP) is an intensive psychosocial intervention delivered to children ages 6-12 in natural settings through the medium of summer camp. A recognized evidence base for the STP has steadily developed and evolved leading to improved stabilization of ADHD associated issues and treatment satisfaction. The following investigation sought to address questions about the efficacy of the STP with respect to predicting treatment responses for a subgroup of ADHD youth presenting with complex clinical presentations of combined type ADHD. The study built on prior evaluations of predictor importance by utilizing socio-emotional measures from the daily behavioral data of the STP, as well as more typically used ADHD dimensional symptom severity measures to inform treatment fit. As anticipated, because the heterogeneity of the disorder suggests that response to treatment is multifaceted, no combination of predictor variables produced a regression equation model that significantly explained variance across all of the treatment outcome variables. After controlling for concurrent pharmacotherapy and age, the combined effects of pretreatment core ADHD symptom severity and social functioning measures were found to significantly explain variance in a criterion variable corresponding with camp objectives (e.g., developing social competencies and coping skills, decreased functioning; Overall STP Improvement Index), as well as positive and negative socio-emotional behaviors measured directly by the STP Point System at the end of the camp. Change in R2 statistics confirmed the study hypothesis in which, the pretreatment socio-emotional factor sets significantly improved the prediction of multiple treatment outcomes over and above DSM-IV ADHD symptom dimensions and control variables. Ten percent of unique variance when predicting informant ratings of improvement made while at camp, 4% unique variance when predicting positive social behavior at the conclusion of Camp STAR, and 2% unique variance when predicting negative social behavior at the conclusion of Camp STAR were among the results. Observed negative behaviors at baseline demonstrated predictive utility whereas results pertaining to hyperactivity/impulsivity and inattention symptom dimensions did not significantly influence behavior, and subsequently, revealed little about the observed variation in outcomes in this particular dataset. While each of the core DSM-IV symptom dimensions are known to be differently associated with a variety of domain specific impairments in the general population (Lahey, & Willcutt, 2010), the results from this study suggest that with ADHD subgroups featuring severe symptom and impairment profiles, the core symptom dimensions did not appear to be as differentially associated with functional impairment. In cases of severe combined type ADHD, decisions about treatment fit should be based more on the socio-emotional impact of symptoms rather than their mere presence. The findings underscore the value in identifying socio-emotional impairments for individuals diagnosed with severe and complicated ADHD as early as possible and to intervene with intensive modalities specifically aimed at developing skills and cognitive faculties that enhance abilities to maintain healthy relationships.
Ph.D. in Psychology, December 2015
Show less

Title: Civic Space: Kuwait
Creator: Kassem, Dalal
Date: 2010-07-29

Title: LOW POWER METHODOLOGIES USING UNIFIED POWER FORMAT
Creator: Varsha
Date: 2012-11-14, 2012-12
Description: This thesis would be incomplete without the mention of people who made it possible and encouraged me at every step along the way. I would like...
Show moreThis thesis would be incomplete without the mention of people who made it possible and encouraged me at every step along the way. I would like to thank Spenser for helping me with the scripts, design of the architectures and always being ready to assist timely with so many issues. My immense gratitude goes to my advisor and mentor Dr. Erdal Oruklu, who pushed me at every step to achieve my best, drove me to explore new avenues, think new ideas and rethink old ones. I am truly thankful to him for his guidance, believing in me and giving me this opportunity to work under him. Thanks to my committee members Dr. Jafar Saniie and Dr. Tricha Anjali for their insights and suggestions. My heartfelt thanks goes to Hirva, Sneha, Pavan, Sagar, Mateen, Pooja and Neha for their continued support and encouragement throughout. Special thanks to Pavan and Sagar for assisting with the architectures and Mateen for helping with the documentation. Thanks to Krishna for being the go-to person for LATEX issues and always being there to help. Thanks to Santhosh and innumerous friends and acquaintances who helped unconditionally in so many ways. My family has been instrumental in the execution of my thesis. Thanks to my sister for inspiriting me, my brother-in-law for his endless encouragement and advice, their continued support along with my uncle, and my family for standing by me. Finally, this thesis is dedicated to my parents, for never giving up on me, believing in me and letting me pursue my dreams.
M.S. in Electrical Engineering, December 2012
Show less

Title: Factors Affecting Sanitizer Efficacy on Preventing Cross-Contamination of E. Coli 0157:H7 During Postharvest Washing of Romaine Lettuce
Creator: Li, Yichen
Date: 2011-12-05, 2011-12
Description: Outbreaks of E. coli O157:H7 infections have been a continuing food safety challenge for the produce industry. Previous studies showed that...
Show moreOutbreaks of E. coli O157:H7 infections have been a continuing food safety challenge for the produce industry. Previous studies showed that contamination that originated in the farm can spread during postharvest processing. The objective of this study was to examine the spread of E. coli O157:H7 during postharvest washing of contaminated lettuce and to determine factors affecting the efficacy of sanitizer use in preventing cross-contamination. A bench-scale washing system was established to simulate industry operations. This system was equipped with a submersible pump and instruments to measure wash water properties including pH, temperature, chlorine level, oxidation reduction potential (ORP), turbidity and total organic carbon (TOC). Fresh-cut romaine lettuce (8 or 20 g) inoculated with approximately 8 log CFU/ml of E. coli O157:H7 with green fluorescence protein (GFP) were added into 40 L of tap water or industry water together with uninoculated lettuce (800 or 2000 g). The wash procedure lasted for 2 minutes. Washing operations were performed at two temperatures (3°C and 20°C) combined with different levels of chlorine treatments (0, 5, 20 and 30 ppm). Smaller-scale (50 – 100 mL) washing experiments were performed separately to determine the effects of organic contents and solid contents on the efficacy of sanitizer. Without chlorine treatment, the spread of E. coli O157:H7 occurred in both tap water and industry water at both 20°C and 3°C. With 20 ppm chlorine, no E. coli O157:H7 was detected in either wash water or uninoculated lettuce after washing in tap water. In industry water, chlorine level at 30 ppm or above could prevent crosscontamination of E. coli O157:H7. Neither the lettuce load nor the wash water temperature was proved to affect the efficacy of sanitizer. At 5 ppm of chlorine, increases in organic carbon (0% to 20%) led to the drop of free chlorine which resulted in a decrease in the microbial reduction from 2.51 to 0.01 log CFU/g. Increases in solid contents (0 g/L to 20 g/L) also caused a decrease in the microbial reduction from 2.52 to 1.17 log CFU/g but it did not change the free chlorine concentration. The utility of ORP as a measure of the antimicrobial efficiency of wash water was evaluated. ORP readings increased with increasing chlorine levels but reached a plateau and failed to correlate with the concentration of chlorine at chlorine levels > 20 ppm.
M.S. in Food Safety and Technology, December 2011
Show less

Title: REAL-TIME FACEDETECTION ANDRECOGNITION SYSTEM INCOMPLEX BACKGROUNDS
Creator: Zhang, Xin
Date: 2015, 2015-07
Description: This report provides a fast and reliable system for real-time face detection and recognition in complex backgrounds. Most current face...
Show moreThis report provides a fast and reliable system for real-time face detection and recognition in complex backgrounds. Most current face recognition systems identify faces under constrained conditions, such as constant lighting condition, the same background. In the real world, people need to be recognized in complex backgrounds under different conditions, such as tilted head poses, various facial expressions, dark or strong lighting conditions. Meanwhile, because of large amounts of real-time applications for face recognition, such as intelligent robot, unmanned vehicle, security monitor, the fast face recognition rate needs to be satisfied for the real-time requirement. In this project, a fast and reliable system is designed to real-time detect and recognize faces under various conditions. Frames are obtained directly from VGA camera. Image preprocessing and face detection, collection, recognition are sequentially implemented on the frames. Local binary patterns and Haar features are used for face detection and eye detection. Local binary pattern encodes every pixel of the image for texture extraction, which is several times faster than Haar feature detection. Adaptive boosting algorithm is used for selecting the best weak classifiers and cascading method divides the extracted best classifiers into several stages to enhance detection rate. Affine transformation is implemented to unify the size of detected facial images and align two eyes to the desired position for improving recognition accuracy. 3􀁵3 Gaussian filter is designed to remove noises of the pre-processed facial images. Principal component analysis (PCA) is used for face recognition, which is fast to identify high-dimensional faces with few principal components.
M.S. in Electrical Engineering, July 2015
Show less

Title: The Brownfield Renewal Recreation Center: Final-board
Creator: Babakhanian, Rosika
Date: 5/10/2011, 2011-05
Description: This Project is an urban renewal of an abandoned post-industrial land in the calumet region located on Chicago’s far southeast. The Calumet...
Show moreThis Project is an urban renewal of an abandoned post-industrial land in the calumet region located on Chicago’s far southeast. The Calumet region was once the largest and richest wetland in lower north America, but 120 years of intensive industrialization, pollution and waste disposal tailored the ecosystem of this region and resulted in thousands of acres of brownfields.
Show less

Title: Improving Food Processing with Process Mapping Techniques (sequence unknown), IPRO 345 - Project Plan: IPRO 345 Project Plan F09_redacted
Creator: Alemayehu, Matti, Amegasse, Pierre-paul, Hogan, Michael, Isoda, Mitchell, Li, Cheng, Mick, Emily, Torres, Edgar
Date: 2009-12
Description: Land O'Frost is a third generation privately held food processing company providing sliced lunch meat products to the North American...
Show moreLand O'Frost is a third generation privately held food processing company providing sliced lunch meat products to the North American marketplace. This IPRO team will study the Formulation process, identifying all inputs, mapping the production process, observing activities and working to identify improvements. The IPRO team will develop a process map of the company’s formulation function, noting inputs, outputs, assets and process parameters.
Sponsorship: Land O'Frost
Project Plan for IPRO 345: Improving Food Processing with Process Mapping Techniques for the fall 2009 semester
Show less

Title: ENHANCED MIXING OF MULTIPLE SUPERSONIC RECTANGULAR JETS BY SYNCHRONIZED SCREECH
Creator: Taghavi, R, Raman, G
Date: 1994-12
Publisher: AMER INST AERONAUT ASTRONAUT

Title: PA 508 Student Computer Usage Survey
Creator: Ahrens, Aric G.
Date: 2010-01-19, 2010-01-19
Description: Included are a survey, and the results in graphic form. The survey was designed to find out how and where the Chinese contingent of Master of...
Show moreIncluded are a survey, and the results in graphic form. The survey was designed to find out how and where the Chinese contingent of Master of Public Administration students used computers. The focus was to determine whether they preferred to use computers on the Downtown Campus, where classes were taught, or on Main Campus, where most of the students lived.
Show less

Title: MODELING THE PERFORMANCE OF A SOLAR CHIMNEY WITH BUILT-IN PHASE CHANGE MATERIALS TO IMPROVE NATURAL VENTILATION
Creator: Khorraminejad, Aysan
Date: 2014, 2014-12
Description: The use of solar chimneys to improve natural ventilation in buildings has been shown to yield energy savings while maintaining thermal comfort...
Show moreThe use of solar chimneys to improve natural ventilation in buildings has been shown to yield energy savings while maintaining thermal comfort in some climate zones. However, one disadvantage is that the ability to control passive ventilation with solar chimneys is often limited by temporal variations of building function and diurnal weather patterns. The unique thermal properties of phase change materials (PCMs) may provide opportunities to manage some of the limitations of solar chimney strategies in buildings through the timed storage and release of thermal energy, which can aid in minimizing daytime heat gains and increasing the effectiveness of nighttime flushing by natural ventilation. This work explores the potential of PCMs combined with solar chimneys to support the passive ventilation of buildings using whole building energy simulation. Results are intended to inform architects and engineers on best practices for incorporating PCMs in buildings with solar chimneys. A model of a prototype office building designed to ASHRAE Standard 90.1 was developed in EnergyPlus and investigated in five U.S. climate zones. A total of 1023 energy simulations were performed to address the following research questions: (1) In what U.S. climate zone is the use of PCMs most appropriate? (2) Can PCMs improve night flushing ventilation when used with a solar chimney? (3) What are the optimal locations for installation of PCMs in building and solar chimney construction in order to provide optimal cooling load reductions? and (4) How do PCM properties influence cooling load reductions? Results demonstrate that the solidification and melting process of PCMs can indeed be used to prolong natural ventilation for night flushing in the evening and nighttime, particularly in climate zones with large diurnal outdoor temperature fluctuations. Results also suggest the following: (1) the optimal location for installation of PCMs in most climates is within the structure of south-facing envelope assemblies; (2) the PCM melting temperature should be equal to or greater than the zone set point temperature; (3) thicker PCMs can yield slightly more cooling energy savings than thinner PCMs; and (4) the thermal conductivity of PCMs does not appear to have a substantial influence on performance.
Ph.D. in Architecture, December 2014
Show less

Title: Architecture and the Void: Perceptible Formlessness
Creator: Hindley, Douglas
Date: 2010-07-29

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of