Search results
(21 - 40 of 301)
Pages
- Title
- POWER ELECTRONIC INTERFACE FOR AN OFF-GRID SOLAR POWERED ENERGY STORAGE SYSTEM
- Creator
- Mao, Yanwen
- Date
- 2012-10-17, 2012-12
- Description
-
There are about 1.5 billion people in the world with no access to electricity. Of these, a significant number of people live in rural parts of...
Show moreThere are about 1.5 billion people in the world with no access to electricity. Of these, a significant number of people live in rural parts of Africa and Asia. It is very inconvenient and unhealthy for them to work or study at night with the poor light from a candle or kerosene lamp. Additionally, since they do not have a continuous or predictable supply of power, it can be significantly difficult for them to use modern electronic devices such as cell phones, computers or sometimes even basic amenities such as lights and fans. For such situations, an energy storage system powered by solar energy can be a good solution, while being environmentally friendly and easy to use. In this thesis, the design and analysis of an off-grid solar powered energy storage system is presented. It consists of a solar panel, battery pack, control circuit, bidirectional DC/DC converter, and inverter. Operation of this system can be described in terms of two modes. In the daytime, the solar panel absorbs energy from sun light; the DC/DC converter boosts the voltage to a certain value and charges the battery pack. During the nighttime, the battery pack provides energy to the circuit; the DC/DC converter boosts voltage level and the inverter inverts DC voltage to single phase AC voltage; this output of 110V AC voltage can charge cell phones, run an energy save lamp, a fan, or even power a laptop. Details of the design process, system operation, components used in the system, simulation and experimental results are explained in the thesis. The main contribution of the thesis is the development of a new off-grid solar powered energy storage system control strategy that can store solar energy in the battery and provide regular 110V AC xii voltage output to the load when needed; additionally, the implementation of the concept along with testing on an experimental set-up is discussed.
M.S. in Electrical Engineering, December 2012
Show less
- Title
- Wagner single phase induction motor
- Creator
- Ash, H. J., Croskey, Philip
- Date
- 2009, 1905
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/wagnersinglephas00ashh
Thesis (B.S.)--Armour Institute of Technology
- Title
- MIN- AREA RETIMING UNDER WIRE-DELAY MODEL
- Creator
- Luo, Tianchen
- Date
- 2011-05-09, 2011-05
- Description
-
Retiming is a powerful optimization technique for synchronize sequential circuits that relocates delay unit without changing the circuit’s...
Show moreRetiming is a powerful optimization technique for synchronize sequential circuits that relocates delay unit without changing the circuit’s input-output functionality. Wire delay is significant and can no longer be ignored in deep sub-micrometer technologies. Existing algorithms solve the problem of min-area and min-period either optimal or heuristically without taking wire delay into consideration. However, those techniques cannot be applied directly to circuit with wire delay. Recent work solved the min-period problem under wire delay model. This paper proposes an algorithm that solves the problem of min-area wire retiming under fixed clock period optimally and efficiently.
M.S. in Electrical and Computer Engineering, May 2011
Show less
- Title
- INCORPORATING INVARIANCE INTO SUPPORT VECTOR MACHINE FOR DETECTION OF MICROCALCIFICATIONS
- Creator
- Yang, Yan
- Date
- 2011-11-16, 2011-12
- Description
-
In this thesis, we explore methods for incorporating invariance into a support vector machine (SVM) classifier in detection of clustered...
Show moreIn this thesis, we explore methods for incorporating invariance into a support vector machine (SVM) classifier in detection of clustered microcalcifications (MC) in mammogram images. Unlike standard SVM, both virtual SVM and tangent vector SVM can include prior information into a trained model. We formulate MC detection as a two-class classification problem and apply these three types of SVM classifiers to this problem. The issue of dimensional reduction is considered in the tangent vector SVM, which has influence on the computational cost and complexity of the algorithm. We test and compare their performance on a set of 200 clinical mammogram images which contain a total of 5,115 MCs. In the experiments these classifiers are optimized with a training procedure for model selection. We evaluate the detection performance using both receiver operating characteristic (ROC) curves and free-response operating characteristic (FROC) curves. The results show that both virtual SVM and tangent vector SVM can outperform the standard SVM. The use of dimensional reduction in tangent vector SVM can effectively reduce the computational cost.
M.S. in Electrical Engineering, December 2011
Show less
- Title
- Tests on the gravity cell
- Creator
- Evans, P. W., Linderberg, W. A.
- Date
- 2009, 1912
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/testsongravityce00evan
Thesis (B.S.)--Armour Institute of Technology
- Title
- SYSTEM DESIGN AND HARDWARE VERIFICATION OF A S-MFCW RADAR
- Creator
- Nadkarni, Satwik
- Date
- 2014, 2014-05
- Description
-
Low cost imaging radar systems are an emerging field today with very useful applications in automotive, healthcare and entertainment...
Show moreLow cost imaging radar systems are an emerging field today with very useful applications in automotive, healthcare and entertainment industries. The aim is to realize an effective and reliable radar system that has a good resolution and at the same time a low cost and complexity. The S-MFCW radar technique has been shown to achieve comparable resolution with the FMCW technique while at the same time maintaining the advantages of reduced hardware complexity and low power consumption. This makes the S-MFCW technique very useful in low cost and low complexity user end devices. The aim of this thesis is to develop a S-MFCW radar system that is capable of measuring distance of an object as well as its velocity. The radar system was implemented using two different approaches – a modular approach and an integrated approach. Both the implementations were tested and the results were found to be in line with expectations from previous research work.
M.S. in Electrical Engineering, May 2014
Show less
- Title
- Test of a delco lighting plant
- Creator
- Porges, Edward D., Given, Louis E
- Date
- 2009, 1917
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/testofdelcolight00porg
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaf 88
- Title
- RECONFIGURABLE ANALOG FRONT-END SYSTEM FOR ULTRASONIC IMAGING APPLICATIONS
- Creator
- Vasudevan, Vidya
- Date
- 2014, 2014-12
- Description
-
Ultrasonic systems, applied in the field of Medical Imaging and Non-Destructive Testing, have evolved from the trolley-based units to more...
Show moreUltrasonic systems, applied in the field of Medical Imaging and Non-Destructive Testing, have evolved from the trolley-based units to more portable, hand-held devices. These systems are built to suit a specific application or aim at specific target material. In order to make these systems portable and adaptable to the testing environment, a flexible and programmable hardware is built. A fully configurable Analog Front-End (AFE) is presented, which possesses the capability for dynamic re-configuration by using ARM processing core for real-time control, data acquisition and signal analysis in a Linux environment. This system supports up to 8 ultrasonic sensors. The flexibility built into the AFE allows for various beamforming and signal conditioning requirements. This reconfigurable system enables ultrasonic researchers to efficiently prototype different experiments and to incorporate high performance ultrasonic signal and image processing algorithms. This system provides real-time signal processing for nondestructive evaluation (NDE) and imaging applications using ultrasonic sensors ranging from 60 KHz to 15 MHz operating frequencies. A dynamically reconfigurable sensor interface is presented for ultrasonic pulse-echo measurements targeting flaw detection and parametric echo classification applications. For real-time implementation, a SoC-based system is developed on an ARM platform. For a working system, a BCM2835 SoC on a Raspberry Pi hardware system is explored with a further upgrade to Xilinx Zynq 7020 SoC in order to achieve a higher throughput.
M.S. in Electrical Engineering, December 2014
Show less
- Title
- CONGESTION CONTROL AND PACKET REORDERING FOR MULTIPATH TRANSMISSION CONTROL PROTOCOL
- Creator
- Ghose, Nirnimesh
- Date
- 2012-04-20, 2012-05
- Description
-
Modern devices are equipped with multiple network interfaces. Traditionally, only one of these is in use at any given time. However,...
Show moreModern devices are equipped with multiple network interfaces. Traditionally, only one of these is in use at any given time. However, simultaneous use of these mul- tiple interfaces will lead to better user experience. Support for this multi-interface scenario has led to the development of Multipath Transmission Control Protocol or MPTCP. MPTCP, as proposed by the IETF working group mptcp, allows a single data stream to be split across multiple paths. This has obvious benefits for reliability, and it can also lead to more efficient use of network resources. But a major problem in MPTCP is the congestion control and the eventual packet reordering at the desti- nation. Various techniques for congestion control for MPTCP have been given, but the packet reordering at the destination is not considered. Efficient packet reordering schemes can drastically improve the throughput for the MPTCP protocol. Therefore, in this work various available packet reordering techniques available for single path TCP are tested in the multipath situation. These algorithms are Duplicate Selective Acknowledgement (DSACK), Eifel and Forward Retransmission Timeout (F RTO). Various network topologies are simulated in a network simulator ns-3 and measure- ments are taken for various path characteristics to see which algorithm works best for the multipath scenario.
M.S. in Electrical Engineering, May 2012
Show less
- Title
- A UNIFIED BOUNDARY CONTROL LAW FOR DC-DC CONVERTERS USING A NORMALIZED STATE PLANE
- Creator
- Nie, Yue
- Date
- 2015, 2015-05
- Description
-
This thesis proposes a unified boundary control law for DC-DC converters (Buck, Boost, and Buck-Boost) which improves both the transient and...
Show moreThis thesis proposes a unified boundary control law for DC-DC converters (Buck, Boost, and Buck-Boost) which improves both the transient and steady state response in comparison to boundary control laws using first or second order switching surface. A new set of switching zones on normalized state plane are defined to decide switching behavior every sample period. Additionally, non-ideal operations and a parameter self-adaptive algorithm are proposed and verified in simulation. The parameter self-adaptive algorithm enhances the system robustness and reduces the parameter sensitivity. The transient bandwidth for the load disturbance rejection and command tracking approaches the physical limits of DC-DC converters. Simulation results are presented to illustrate the major benefits of the proposed uni ed boundary control law.
M.S. in Electrical Engineering, May 2015
Show less
- Title
- SUBSTATION PLANNING FOR RURAL DISTRIBUTION SYSTEMS IN AFRICAN COUNTRIES
- Creator
- Soyoye, Oluwadamilola
- Date
- 2016, 2016-12
- Description
-
In sub-Saharan Africa, only 35% of the population is connected to grid electricity [2]. Grid-connected parts face serious transmission and...
Show moreIn sub-Saharan Africa, only 35% of the population is connected to grid electricity [2]. Grid-connected parts face serious transmission and distribution challenges. There is also the challenge of electricity demand being greater than electricity supply. These issues in all levels of the traditional power system – generation, transmission and distribution have led to gross inadequacy of electricity supply. This research focuses on the capital intensive Power Distribution Planning (PDP). Most problems in the distribution system affect the consumer directly. Distribution substation planning, a critical part of the PDP, particularly addresses the issue of overloaded distribution systems. It is not uncommon for substation transformers in some African communities to become damaged because of overloading. The choice of location, sizing, siting and number of substations is determined by considering load distribution, feeder lengths and sizes, and the interruption costs. The research illustrates a framework for substation planning, incorporating possible future load growths over a particular period to forestall unwanted failures in the distribution system. A direct algorithm is used, where the substation capacity is computed manually from the load levels at different points. This algorithm is later combined with the Mixed Integer Linear Programming (MILP) approach solved with the CPLEX solver in MATLAB.
M.S. in Electrical Engineering, December 2016
Show less
- Title
- Tests on enameled wire
- Creator
- Gault, Mark E.
- Date
- 2009, 1911
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/testsonenameledw00gaul
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaf 26
- Title
- Variable speed motor control
- Creator
- Fry, August, Baker, Charles
- Date
- 2009, 1906
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/variablespeedmot00frya
Thesis (B.S.)--Armour Institute of Technology
- Title
- HIGH PERFORMANCE LOGIC DESIGN FOR ADAPTIVE FIR FETAL ECG ESTIMATION
- Creator
- Wang, Sizhou
- Date
- 2014, 2014-05
- Description
-
This thesis presents realizations of IEEE-754 single precision floating point non-invasive fetal ECG estimation based on QR Decomposition...
Show moreThis thesis presents realizations of IEEE-754 single precision floating point non-invasive fetal ECG estimation based on QR Decomposition Recursive Least Square algorithm (QRD-RLS). Experiments of the system, which is implemented on Xilinx Zynq SoC platform, are carried out with electrocardiogram (ECG) data and the results with analysis are presented. The embedded system design aims for saving resources, streaming pipeline performance and software-aid computation and integration. The challenge of exploiting the system full potential with pseudo-parallel computation on multiple fetal ECG data packets is also examined.
M.S. in Computer and Electrical Engineering, May 2014
Show less
- Title
- TRANSMISSION RESERVE DESIGN IN ELECTRICITY MARKETS CONSIDERING RAMPING CONSTRAINTS AND LOAD UNCERTAINTY
- Creator
- Xiao, Xuli
- Date
- 2016, 2016-12
- Description
-
With increasing penetration of renewable energy, uncertainty challenges ISOs to keep power balance in real-time. As ramping issues draw public...
Show moreWith increasing penetration of renewable energy, uncertainty challenges ISOs to keep power balance in real-time. As ramping issues draw public attention, many ISOs have instituted flexible ramping products to ensure ramping reserve at generation side. However, not all the ramping reserves are deliverable when a transmission line is already congested. In the real-time market, if an uncertain load estimation is known at peak time t+10mins previously, SCUC/SCED is able to spare transmission reserve by changing the dispatch at time t with additional uncertain load constraints at t. To spare transmission reserve under uncertainty, this research proposes an uncertain load estimation to generate an estimated uncertain load and uncertainty constraints at t+10 in SCUC/SCED: with the help of a stochastic optimization model, uncertainties are quantified as a random actual load y and utilized in a modified stochastic model for undeliverable ramping reserve issues; once the optimal total system generation x is obtained, treated as an estimated uncertain load, uncertainty constraints are added at t+10mins in SCUC/SCED to obtain a secure dispatch at t. Therefore, transmission ramping reserve is ensured by a change in dispatch at t. Numerical results show that this design enhances the economy and scalability of power systems. In addition, scalability analysis proves it works for any scale of power systems with multiple local peak loads.
M.S. in Electrical Engineering, December 2016
Show less
- Title
- PARADIGM SHIFT IN REMOTE EDUCATION FOR THE LABORATORY: A SOCIAL APPROACH TO DISTANCE LEARNING
- Creator
- Hanley, Richard
- Date
- 2011-12, 2011-12
- Description
-
With modern telecommunication tools the ability for two individuals to work together remotely has greatly improved. Moreover, there have been...
Show moreWith modern telecommunication tools the ability for two individuals to work together remotely has greatly improved. Moreover, there have been great strides made to improve handling medium to large groups of people in real time in remote settings, viz. the teleconference and webinar. However, the status of remote tools for laboratory environments where there is significant hardware and the individuals are more likely to talk amongst themselves in irregular patterns is not nearly as well studied. This thesis examines the way most laboratories in electrical engineering are setup, and creates a model for how to create a remote environment for distance learning. It then discusses the current state of the art, and how such an implementation of the model can be made with such tools. Finally a usability study of the implementation is examined. The primary result of the usability study is that when moving to a remote environment the social paradigm that students and instructors use is likely to change, and simply working on creating a virtual mirror to the laboratory may not work in the future.
M.S. in Electrical Engineering, December 2011
Show less
- Title
- DEVELOPMENT OF A TESTBED FOR STUDYING SECURITY ISSUES IN VOIP NETWORKS
- Creator
- Olawoye, Oladeji
- Date
- 2011-12-06, 2011-12
- Description
-
VoIP is increasingly becoming an alternative to the traditional PSTN for Telephony this is as a result of certain advantages and services...
Show moreVoIP is increasingly becoming an alternative to the traditional PSTN for Telephony this is as a result of certain advantages and services offered by VoIP. VoIP will be considered able to fully replace PSTN if it can provide same or better Quality of Service and Security guaranty as PSTN. Delivering telephony services over (best-effort and connectionless) IP data network faces two main issues not experienced in PSTN, security and quality of service; security in the sense that telephone calls will be susceptible to attacks that are known in the Internet, quality of service in the sense that voice packets now have to compete with packets of other traffic for a limited bandwidth. Researches are ongoing in these two fields to make experience on VoIP similar to the traditional telephone. The focus of this thesis work is in the security aspect. SIP protocol has become one of the most popular signaling protocols used for VoIP, SIP architecture is an open architecture originally developed for trusted communications among trusted partners, and therefore much thought was not given to security. Adopting SIP as a main protocol used in VoIP in the Internet where there are where there are lots of hostile users calls for more ways to properly secure its use. The thesis work involves setting up of a SIP based VoIP network based on open source SIP telephony platforms to study various security issues in a SIP-Based VoIP network and experiment some proposed detection mechanism. The contribution of this work is to develop a graphical user interface in the UNIX environment using Java that makes the execution of the attack scenarios easy to carry out and observe.
M.S. in Electrical Engineering, December 2011
Show less
- Title
- Study of electric rates and ratemaking
- Creator
- Barrer, Glen A, Shaffer, Sydney
- Date
- 2009, 1915
- Publisher
- Armour Institute of Technology
- Description
-
http://www.archive.org/details/studyofelectricr00barr
Thesis (B.S.)--Armour Institute of Technology, 1915 Bibliography: leaves 43-47 B.S. in...
Show morehttp://www.archive.org/details/studyofelectricr00barr
Thesis (B.S.)--Armour Institute of Technology, 1915 Bibliography: leaves 43-47 B.S. in Electrical Engineering, 1915
Show less
- Title
- SECURITY-CONSTRAINED UNIT COMMITMENT RESERVE DETERMINATION IN JOINT ENERGY AND ANCILLARY SERVICES AUCTION
- Creator
- Ganji Tanha, Mohammad Mahdi
- Date
- 2012-07-25, 2012-07
- Description
-
This study presents the method in which the energy and ancillary services auction is simultaneously cleared in electricity market. By the...
Show moreThis study presents the method in which the energy and ancillary services auction is simultaneously cleared in electricity market. By the security-constraint unit commitment model proposed in this study Independent System Operators (ISO) can determines the sufficient amount of reserve which is necessary to maintain security and reliability of the system. Before the fixed reserve requirement either equal to a percentage of the system peak load or a thermal unit with highest capacity is considered in energy and ancillary service auction in market clearing. The disadvantage of this method is high cost and insufficiency. When it is insufficient the system operator needs to committee more thermal units or does the load curtailment. At the time the fixed quantity is more than needed customers pay more although it is not necessary. Here the sufficient amount of reserve is determined based on the contingency which has been simulated. Contingencies include thermal unit outage and line outage is considered. The amount of reserves is obtained based on thermal units’ physical constraints and the rate offered in the electricity market. Then the integration of wind generation and its effects on the quantity of the reserve determination is considered. Since the wind power generation brings uncertainties to the power system we need to consider scenarios. In order to generate wind power generation scenarios we use Monte Carlo simulation. Since the number of scenarios are too much and increase the problem complexity we use Fast backward/forward scenario reduction. This problem is solved through direct optimization problem including the minimization of the operational cost as well as satisfying the network security constraints when contingency happens.
M.S. in Electrical Engineering, July 2012
Show less
- Title
- REAL-TIME TRAFFIC SIGN RECOGNITION WITH RECONFIGURABLE HARDWARE
- Creator
- Waite, Sheldon
- Date
- 2012-07-12, 2012-07
- Description
-
This work describes an implementation of a system that recognizes tra c signs within an image or video frame. In addition it covers a brief...
Show moreThis work describes an implementation of a system that recognizes tra c signs within an image or video frame. In addition it covers a brief history of automotive technology and the safety motivations for the technology presented here. An algo- rithm is presented that takes RGB image data, extracts relevant pixels, lters the image, labels prospective tra c signs and evaluates them against template tra c sign images. Furthermore a system is described that uses a Virtex 5 Xilinx FPGA and the EDK tool kit to create an embedded processor and a hardware IP periph- eral that together implement the algorithm. This implementation is shown to have positive results both in terms of timing performance and accuracy.
M.S. in Computer Engineering, July 2012
Show less