Search results

(1 - 6 of 6)
Nonlinear Interactions as Precursors to Mode Jumps in Resonant Acoustics
Title
Nonlinear Interactions as Precursors to Mode Jumps in Resonant Acoustics
Creator
Panickar, P., Srinivasan, K., Raman, G.
Date
2005-09
Publisher
American Inst Physics
Description
This paper examines instability mode switching in various supersonic jet configurations that involve resonant acoustics. Resonant acoustics...
Show moreThis paper examines instability mode switching in various supersonic jet configurations that involve resonant acoustics. Resonant acoustics includes situations where flow instabilities are enhanced by feedback. The pressure spectra in such situations are rich in multiple modes, and mode switching can occur rather unpredictably. Our experiments reveal that mode switching and the number of nonlinear interactions are interconnected and this number increases just prior to a mode switch. We quantified nonlinear interactions by counting the number of such interactions occurring over a threshold level in the nonlinear cross-bicoherence spectrum and confirmed that nonlinear interactions are precursors to mode jumps. Further, this result was found to be independent of the threshold level. Moreover, if more than one instability mode coexisted, the decay of one and the persistence of the other caused a similar increase in nonlinearities. On the other hand, if there was no mode switch, the nonlinearities remained at comparable limits over the entire operating range. The latter part of the work focused on why difference interactions significantly outnumbered sum interactions in the spectra of shock-containing resonant flows. Using linear stability calculations it is shown that most of the difference interactions that occurred had a positive spatial growth rate and were, hence, unstable. In contrast, a majority of the sum interactions lay outside the amplified region which indicated that they tend to decay spatially. (c) 2005 American Institute of Physics.
http://dx.doi.org/10.1063/1.2008995
Show less
Mixer-ejector Wall Pressure and Temperature Measurements Based on Photoluminescence
Title
Mixer-ejector Wall Pressure and Temperature Measurements Based on Photoluminescence
Creator
Taghavi, R.r., Raman, G., Bencic, Tj
Date
2002-04
Publisher
American Inst Aeronaut Astronaut
Description
Ejector side-wall pressure distribution is a key indicator of supersonic jet-mixer-ejector performance. When documenting pressure patterns on...
Show moreEjector side-wall pressure distribution is a key indicator of supersonic jet-mixer-ejector performance. When documenting pressure patterns on an ejector wall using pressure-sensitive paint (PSP), one has to consider temperature variations caused by the supersonic jet flow within the ejector because these can cause significant local errors in the PSP results. If the temperature sensitivity of PSP is not corrected for in complex internal supersonic flows, large localized errors could contaminate the results. In the present work, temperature-sensitive paint maps the temperature distribution on the ejector wall and corrects PSP results point-by-point for temperature sensitivity. The experiments were conducted on multijet supersonic mixer-ejector configurations with straight, convergent (6-deg), and divergent (6-deg) side walls. A comparison of corrected and uncorrected PSP readings shows that at M-j = 1.55, the error with respect to true data from static pressure ports can be reduced from 4.98 to 2.84% for the case of a simple ejector with parallel walls. For the complex 6-deg convergent ejector at M-j = 1.39, the error reduces by almost an order of magnitude (from 20.83 to 2.66%). Our results indicate that the use of this correction technique can significantly reduce PSP errors in complex internal supersonic flow situations.
Show less
Jet Thrust Vectoring Using a Miniature Fluidic Oscillator
Title
Jet Thrust Vectoring Using a Miniature Fluidic Oscillator
Creator
Raman, G., Packiarajan, S., Papadopoulos, G.
Date
2005-03
Publisher
Royal Aeronautical Soc
Description
This paper presents a new approach to vectoring jet thrust using a miniature fluidic actuator that provided spatially distributed mass...
Show moreThis paper presents a new approach to vectoring jet thrust using a miniature fluidic actuator that provided spatially distributed mass addition. The fluidic actuators used had no moving parts and produced oscillatory flow with a square wave form at frequencies up to 1(.)6kHz. A subsonic jet with an exit diameter of 3(.)81cm was controlled using single and dual fluidic actuators, each with an equivalent circular diameter of 1(.)06mm. The fluidic nozzle was operated at pressures between 20(.)68 and 165(.)47kPa. The objectives of the present work included documentation of the actuation characteristics of fluidic devices, assessment of the effectiveness of fluidic devices for jet thrust vectoring, and evaluation of mass flow requirements for vectoring under various conditions. Measurements were made in the flow field using a pitot probe for the vectored and unvectored cases. Some acoustic measurements were made using microphones in the near-field and for selected cases particle image velocimetry (PIV) measurements were made. Thrust vectoring was obtained in low speed jets by momentum effects with fluidic device mass flow rates of only 2 x 10(-4) kg/sec (0-6% of main jet mass flow per fluidic oscillator). Although a single fluidic device produced vectoring of the primary jet, the dual fluidic device configuration (with two fluidic devices on either side of the jet exit) produced mass flux enhancement of 28% with no vectoring. Our results indicate that fluidic actuators have the potential for use in thrust vectoring, flow mixing and industrial flow deflection applications.
Show less
Pressure Sensitive Paint Demonstrates Relationship Between Ejector Wall Pressure and Aerodynamic Performance
Title
Pressure Sensitive Paint Demonstrates Relationship Between Ejector Wall Pressure and Aerodynamic Performance
Creator
Taghavi, R., Raman, G., Bencic, T.
Date
1999-05
Publisher
Springer Verlag
Description
This paper provides an example of the application of Pressure Sensitive Paint (PSP) to complex internal suspersonic flows and demonstrates the...
Show moreThis paper provides an example of the application of Pressure Sensitive Paint (PSP) to complex internal suspersonic flows and demonstrates the relationship between ejector wall pressure and aerodynamic performance. Details of such jet mixer-ejector nozzles are relevant to jet noise reduction programs. Several ejector configurations with straight, convergent, and divergent side walls were used in our experiments. The side-wall that was painted with PSP was also instrumented with an array of 156 pressure taps connected to Electronically Scanned Pressure (ESP) modules, enabling simultaneous measurement of "true" reference pressures. The PSP results agreed very well with the "true" reference pressures and also provided a detailed map of the complicated pressure patterns that could not be detected using the pressure taps. Finally, we also demonstrated the direct relationship between ejector side-wall pressure distribution and ejector performance characteristics such as exit mean flow uniformity, pumping, and thrust augmentation.
Show less
Innovative Actuators for Active Flow and Noise Control
Title
Innovative Actuators for Active Flow and Noise Control
Creator
Cain, A. B., Raman, G.
Date
2002
Publisher
Professional Engineering Publishing Ltd
Description
Active flow control (AFC) has the potential to improve the efficiency of systems that involve both internal and external fluid flow. The...
Show moreActive flow control (AFC) has the potential to improve the efficiency of systems that involve both internal and external fluid flow. The primary driver in AFC is the expectation that the control will result in significant performance benefits at the system level with all trade-offs factored in. Successful application to aircraft systems can produce lighter, stealthier, agile aircraft with increased range, payload and a muffled acoustic signature. The design of an AFC system requires knowledge of flow phenomena and the selection of appropriate actuators, sensors and a control algorithm. The present overview focuses on actuators. Examples of flow and noise control presented here are restricted to open-loop systems. Various aspects of actuator utilization include actuator output characterization, exploiting resonances (plenum, structural or aeroacoustic) to enhance actuator amplitude and the different modes of actuation. A brief description of a high-bandwidth actuator is also provided, followed by a variety of application examples including edgetone suppression, cavity noise suppression, impingement noise suppression and jet mixing enhancement. The review concludes with a description of the successful application of AFC to the exhaust plume from an aircraft engine (JT8D).
Show less
MODE SPECTRA OF NATURAL DISTURBANCES IN A CIRCULAR JET AND THE EFFECT OF ACOUSTIC FORCING
Title
MODE SPECTRA OF NATURAL DISTURBANCES IN A CIRCULAR JET AND THE EFFECT OF ACOUSTIC FORCING
Creator
Raman, G, Rice, Ej, Reshotko, E
Date
1994-10
Publisher
SPRINGER VERLAG
Description
A modal spectrum technique was used to study coherent instability modes (both axisymmetric and azimuthal) triggered by naturally occurring...
Show moreA modal spectrum technique was used to study coherent instability modes (both axisymmetric and azimuthal) triggered by naturally occurring disturbances in a circular jet. This technique was applied to a high Reynolds number (400,000) jet for both untripped (transitional) and tripped (turbulent) nozzle exit boundary layers, with both cases having a core turbulence level of 0.15%. The region up to the end of the potential core was dominated by the axisymmetric mode, with the azimuthal modes dominating further downstream. The growth of the azimuthal modes was observed closer to the nozzle exit for the jet with a transitional boundary layer. Whether for locally parallel flow or slowly diverging flow, even at low levels of acoustic forcing, the inviscid linear theory is seen to be inadequate for predicting the amplitude of the forced mode. In contrast, the energy integral approach reasonably predicts the evolution of the forced mode.
Show less