Search results
(1 - 20 of 65)
Pages
- Title
- Functionalized Polyoxovanadates: Synthesis, Characterization and Properties
- Creator
- Zheng, Yujuan
- Date
- 2012-04-30, 2011-12
- Description
-
The compound [NaVIV6O6{(OCH2CH2)2NCH2CH2OH}6]Cl.H20, designated C0 in this report, an Anderson type structure, contains a single nitrogen atom...
Show moreThe compound [NaVIV6O6{(OCH2CH2)2NCH2CH2OH}6]Cl.H20, designated C0 in this report, an Anderson type structure, contains a single nitrogen atom in place of a single oxygen atom in each of the six vanadium-oxygen octahedra. Attached to each nitrogen are two alkoxide arms (-O-C-C-) which terminate on separate oxygen atoms of the octahedra. A third ethoxy group (-CH2-CH2-OH) dangles freely from each nitrogen atom. The functionalized cationic core [NaVIV6O6{(OCH2CH2)2NCH2CH2OH}6]+ is generated in situ and is cationic with a charge of +1. Chloride is the counteranion. Each vanadium addenda atom is the +4 oxidation state, and the six unpaired electrons result in interesting magnetic properties. C0 is obtained by reaction of a vanadium oxide source triethanolamine. The purpose of the research described here was to adapt the synthetic protocol associated with triethanolamine to other similar ligands. Ligand choice was motivated by the broader goal of this research group to form (extended) hybrid electronic and magnetic materials by chemically bonding POM cores to chemically interesting ligands, such as dyes or other POM cores. In this regard, the original triethanolamine derivative has a number of shortcomings; chief among them is the inaccessibility of the alcoholic functional group chemistry---due to its low pH---that otherwise might have been used to form linkages through the dangling alkoxy arms. Additionally, linkages containing paraffinic carbon (-C-C-), which is not a good conduit of electronic interaction, are chemically undesirable where the synthetic goal is hybrid structures with interesting electronic and magnetic properties. The results associated with the three ligands, diethanolamine, N,N'-Bis(2-hydroxyethyl)ethylenediamine, and N,N-Bis(2-hydroxyethy) ethylenediamine, are described herein. Diethanolamine was chosen because---based on a structural comparison to triethanolamine---it was expected to produce a structure having a hydrogen atom in place of the dangling ethoxy arms, which was indeed the result. We considered this structure highly desirable becasue of the potential lability of the hydrogen atom (-N-H), which would allow us to functionalist the core directly. The resulting compounds are characterized by single-crystal X-ray diffraction, elemental analysis, mass spectroscopy, thermogravimetric analysis, FT-IR and UV-Vis spectroscopy, maganometric titration, temperature-dependent magnetic susceptibility measurements, and cyclic voltammetry. The results of the cyclicvoltammetric investigation are consistent with the labile hydrogen atom (-N-H).
M.S. in Chemistry, December 2011
Show less
- Title
- BIO-COMPOSITE NANOMATERIALS; CHARACTERIZATION, MANIPULATION AND APPLICATION
- Creator
- Kim, Taeyoung
- Date
- 2013, 2013-05
- Description
-
Biomaterials are any matter or material which interacts with biological system which were present on natural or synthetic nonviable materials....
Show moreBiomaterials are any matter or material which interacts with biological system which were present on natural or synthetic nonviable materials. An ideal biomaterial must physically and chemically compatible for biological applications to avoid toxicity and immune reaction. Collagen is a widely abundant, robust biopolymer that is found in the extracellular matrix (ECM) of many tissues. In terms of its structure and organization, collagen is a bio-nano material. The use of collagen in stem cell differentiation is particularly enticing since it is now evident that the extracellular matrix (ECM) proteins can regulate the cell’s fate and growth by their molecular and physical properties. In this thesis research, we have characterized the physical and structural properties of collagen and its composite materials. We found collagen interacts with NaCl and other nano-materials, such as carbon nanotube (CNT) and TiO2 nanotube, resulting in the modification of collagen structure and increase of its stiffness. In particular, CNT has changed collagen structure at both the molecular level and the higher organizational level. The effects of the matrices on cell growth and development were studied. It was found that collagen/CNT matrix specify and accelerate the stem cell differentiation toward neural cells. Since neurons form the foundation of biological circuit, manipulation of neurons in growth has the potential to form desired biological circuit. We also examined collagen in vaginal wall connective tissues, and found that alteration of collagen properties in clinical tissues is correlated to the onset of pelvic organ prolapse.
PH.D in Chemistry, May 2013
Show less
- Title
- UNDERSTANDING REACTION MECHANISMS AND CONTROLLING REACTIVE SURFACE SPECIES DURING ATOMIC LAYER DEPOSITION OF METAL CHALCOGENIDES
- Creator
- Weimer, Matthew S.
- Date
- 2016, 2016-07
- Description
-
Atomic layer deposition (ALD) is a thin film growth technique that relies on self-limiting reactions between vapor precursors and a surface....
Show moreAtomic layer deposition (ALD) is a thin film growth technique that relies on self-limiting reactions between vapor precursors and a surface. Significant progress has been made in the scope of materials grown by ALD, enabled by precursor development and investigation of surface reaction mechanisms; progress is still necessary. This dissertation has two portions. The first is the development of organometallic compounds to engender new material growth by ALD. Second is the development of X-ray absorption spectroscopy (XAS) tools and techniques for observations of the metal coordination environment during ALD. One material that can be difficult to make is doped materials. Composition of a doped material determines the film properties. One example is vanadium doped indium sulfide. This material was purposed as an intermediate bandgap solar absorbing material which can absorb multiple ranges of light. Two new precursors were developed for the growth of indium sulfide and vanadium sulfide. The indium sulfide material grown has shown superior film photocurrent qualities and doping of vanadium into indium sulfide with fine control over atomic placement was achieved. Films were grown that showed secondary absorptions which aligned with theoretical calculations. The flexibility of the V(III) precursor is shown by a short study on the control of the difficult vanadium-oxygen system in the deposition of stoichiometric oxides. To illustrate how XAS can be used in conjunction with other techniques tin dioxide growth from a stannylene precursor and hydrogen peroxide was studied. From ex situ XAS measurements nucleation, growth and termination reaction mechanism were discovered. Next, a mobile ALD reactor allowed for in situ XAS measurements to be performed on “flat” substrates for the first time. Specifically, the local coordination environment and surface reactions were followed while erbium was doped into alumina and coordination environment of manganese was investigated in the growth of manganese-doped zinc oxide, with the ability to probe in-plane versus out-of-plane bonds. These unique in situ XAS experiments allow for greater understand of metal and non-metal precursors as they interact with surfaces. This enhanced understanding enables new precursor development which leads to better control over surface chemistry and new materials.
Ph.D. in Chemistry, July 2016
Show less
- Title
- STUDIES ON SYNTHETIC APPLICATIONS OF STEREOSELECTIVE AND REGIOSELECTIVE RING OPENING REACTIONS OF AZIRIDINIUM IONS
- Creator
- Chen, Yunwei
- Date
- 2014, 2014-12
- Description
-
Aziridinium ions are valuable reactive intermediates in organic synthesis. Regioselective and stereoselective ring opening reactions of...
Show moreAziridinium ions are valuable reactive intermediates in organic synthesis. Regioselective and stereoselective ring opening reactions of aziridinium ions can provide various useful building blocks including optically active vincinal amines, amino alcohols and amino esters. Aziridinium ions are also involved in the biological process of anti-cancer agents. However, aziridinium ions are under-utilized in organic synthesis. In this thesis, we utilize stereoselective and regioselective ring opening reactions of aziridinium ions for synthesis of enantiomerically enriched compounds. Ring opening reactions of aziridinium ions were utilized in intramolecular Friedel-Crafts (FC) reactions for stereoselective and regioselective synthesis of 4-substituted tetrahydroisoquinoline. A series of β-haloamine were prepared as precuresors of aziridinium ions. The reaction conditions for ring opening of aziridinium ions for the FC reactions including temperature, catalysts, and solvents were optimized. Further, the reaction mechanism was studied to prove that the aziridinium ions were formed as the key intermediates during the intramolecular FC reaction. Intermolecular nucleophilic ring opening reaction of aziridinium ions was studied as a convenient method of carbon-carbon formation. Regioselective and stereoselective nucleophilic substitution reactions of aziridinium ions with indole analogues were carried out for the synthesis of optically active tryptamine analogues. The reactions proceeded smoothly to provide the tryptamine analogues in high yield in the presence of halo-sequestering agents, while the reaction provided the tryptamine products in significantly low yield in the absence of halo-sequestering agents. Ring opening reactions of aziridinium ions with malonic esters and Grignard reagents were carried out for the respective synthesis of optically active tryptamine analogues, γ-aminobuyric acid (GABA), and α-amine derivatives. The regiospecific ring opening reactions of aziridinium ions was directly applied for the synthesis of bifunctional ligands which have a potential use in targeted therapy and imaging of cancers. The novel bifunctional chelates with a shorter alkyl spacer C-NETA and 2E-C-NETA as well as the chelates with a longer alkyl spacer 5p-C-NETA were prepared. 5p-C-NETA was conjugated to a cyclic peptide c(RGDyK) as a targeting moiety for use in targeted radiation therapy. In addition, 2E-C-NETA was conjugated to a fluorescent dye Cy5.5 for theranostic applications. The experimental results indicated that the new bifunctional ligands have promising applications in the biomedical field. In summary, stereoselective and regioselective ring opening reactions of aziridinium ions have been successfully applied for the synthesis of optically active compounds such as 4-substituted tetrahydroisoquinolines, tryptamines, γ-aminobuyric acid, α-amine derivatives and the bifunctional chelators. We demonstrated that ring opening of versatile aziridinium intermediates is a strightforward and convenient method for the synthesis of various optically active compounds.
Ph.D. in Chemistry, December 2014
Show less
- Title
- NANOPORE STOCHASTIC DETECTION OF ANTHRAX
- Creator
- Han, Yujing
- Date
- 2014, 2014-05
- Description
-
Nanopore stochastic sensor using a biological protein ion channel has emerged as a powerful sensing technique due to its outstanding features...
Show moreNanopore stochastic sensor using a biological protein ion channel has emerged as a powerful sensing technique due to its outstanding features such as label- and amplification-free detection, rapidness, high sensivity and selectivity. Development of a nanopore stochastic sensor for the rapid detection of anthrax can effectively prevent and control the spread of disease infection, and become extremely useful in biodefense. Two sensor design strategies were studied: one is chemistry-based detection of dipicolinic acid; and the other is genetics-based detection of anthrax lethal factor. Both approaches used in this study should find useful application in the development of nanopore sensors for the detection of other biomolecules and pathogens.
M.S. in Chemistry, May 2014
Show less
- Title
- STUDIES TOWARD TOTAL SYNTHESIS OF (-)-DEGUELIN
- Creator
- Li, Bao
- Date
- 2013-05-13, 2013-05
- Description
-
Deguelin, as a rotenoid, has emerged as an attractive pharmacophore for chemprevention due to its effectiveness for both in vitro and in vivo...
Show moreDeguelin, as a rotenoid, has emerged as an attractive pharmacophore for chemprevention due to its effectiveness for both in vitro and in vivo models. The biological activity and its structural complexity instigated the development of new synthetic technologies which could satisfy the increasing demand of deguelin, as well as broaden the diversity of the rotenoids. Here, a strategy of asymmetric acid-catalyzed annulations toward the enantioselective total synthesis of (-)-deguelin will be discussed. Several approaches were investigated to connect the chromene and phenolic moieties to create the pentacyclic rotenoid skeleton. Meanwhile, by collaborating with Professor Rajendra Mehta, several derivatives of deguelin were also made to study its bioactivity and interaction modes with specific proteins.
M.S. in Chemistry, May 2013
Show less
- Title
- NANOPORE STOCHASTIC SENSING OF BIOMARKERS IN HUMAN DISEASE
- Creator
- Zhou, Shuo
- Date
- 2016, 2016-07
- Description
-
By measuring the ionic current modulation generated by analytes’ electro-osmotic flow through a nanoscale sized pore, nanopore stochastic...
Show moreBy measuring the ionic current modulation generated by analytes’ electro-osmotic flow through a nanoscale sized pore, nanopore stochastic sensing was invented about 20 years ago. Since then, it has been developed as a powerful and versatile tool for the detection of a wide variety of substances, including metal ions, organic molecules, DNA, RNA, peptides, proteins, etc. Compared with other traditional techniques such as immunochemical detection, colorimetric detection, HPLC, and GC/MS, nanopore detection has many advantages. First and foremost, nanopore stochastic sensing does not need to use sophisticated instruments which are convenient for people who do not have professional training in operating a special device. Furthermore, unlike fluorescent methods which rely on fluorophores labeling, nanopore stochastic sensing is a label-free detection method, which is based on the natural characteristics of analytes of interest. Moreover, nanopore sensing does not need complicated pretreatment of samples and can achieve a very low detection limit rapidly. Most importantly, nanopore detection uses only a small amount of sample with a low assay cost. In this dissertation, I summarize my work on nanopore stochastic sensing of proteases and copper ion, i.e., the detection of the HIV-1 protease (HIV-1 PR), trypsin, and copper ion. It is well-known that the HIV-1 protease is a significant biomarker for AIDS, while trypsin for the pancreatic disease. Considerable effort has been devoted to developing highly sensitive and selective sensors for these two important proteases. By taking advantage of nanopore stochastic sensing, two biosensors are constructed where picomolar concentrations of the HIV-1 protease and trypsin can be detected. On the other hand, copper, an essential trace element, is vital to the health of our human being in many ways. For example, the accumulation of cupric ions in human body may explain the origin of Wilson disease; further, the elevated concentration of copper is also pertinent to some symptoms of Alzheimer disease. Hence, the capability to the sensitive and accurate detection of copper ions is crucial to our health and well-being. For this purpose, a real-time and label-free nanopore biosensor is developed for its detection. The successful research efforts in these projects demonstrate the useful application of nanopore stochastic sensing in medical diagnosis, especially in terms of early disease detection. In addition to the high sensitivity and accuracy as well as low assay cost, other advantages of nanopore sensors include instrumental simplicity, ease of use, and extremely rapid data acquisition rates. Such a field-deployable nanopore sensor is useful as a point-of-care device for early disease detection and diagnosis. Just imagine how convenient your medical diagnosis would become with the pocket size nanopore sensor. We can monitor our own health anytime and anywhere: at home, at workplace, or even outside in remote and isolated places.
Ph.D. in Chemistry, July 2016
Show less
- Title
- COMPUTATIONAL FLUID DYNAMICS AND POPULATION BALANCE MODEL FOR SIMULATION OF DRY SORBENT BASED CO2 CAPTURE PROCESS
- Creator
- Abbasi, Emadoddin
- Date
- 2013, 2013-12
- Description
-
Carbon capture and sequestration (CCS) is one of the key technologies needed to mitigate carbon dioxide emission from industrial sources and...
Show moreCarbon capture and sequestration (CCS) is one of the key technologies needed to mitigate carbon dioxide emission from industrial sources and power plants. Development of CFD-based design tool for prediction of the extent of CO2 capture in a regenerable dry sorbent-based technology, in an efficient power plant design (i.e., modern IGCC power plants) was the driving force behind this project. In this study, we established a systematic methodology, starting from investigating the properties of the sorbent and its reaction mechanism, to developing a model for design and scale-up of the reactors that is needed to deploy this technology at larger scales. This dissertation provides a coupled CFD-PBE model based on the novel FCMOM approach with broad application in reaction engineering and reactor design where the polydisperse nature of the phases has strong effect on the hydrodynamics of the system. Detailed investigations of the MgO-based sorbent and its performance toward capturing CO2 from a coal gas stream were performed that result in development of the two-zone variable diffusivity shrinking core reaction model. Furthermore, a baseline design for a circulating fluidized bed (CFB) reactor, using numerical modeling and threedimensional simulations of a full-loop circulating fluidized bed reactor was provided based on the coupled CFD-PBE, which in combination with the reaction model can perform as a base for parametric studies and optimization of the process.
PH.D in Chemical Engineering, December 2013
Show less
- Title
- ELECTROSPUN COLLAGEN/SILK TISSUE ENGINEERING SCAFFOLDS: FIBER FABRICATION, POST-TREATMENT OPTIMIZATION, AND APPLICATION IN NEURAL DIFFERENTIATION OF STEM CELLS
- Creator
- Zhu, Bofan
- Date
- 2017, 2017-05
- Description
-
Biocompatible scaffolds mimicking the locally aligned fibrous structure of native extracellular matrix (ECM) are in high demand in tissue...
Show moreBiocompatible scaffolds mimicking the locally aligned fibrous structure of native extracellular matrix (ECM) are in high demand in tissue engineering. In this thesis research, unidirectionally aligned fibers were generated via a home-built electrospinning system. Collagen type I, as a major ECM component, was chosen in this study due to its support of cell proliferation and promotion of neuroectodermal commitment in stem cell differentiation. Synthetic dragline silk proteins, as biopolymers with remarkable tensile strength and superior elasticity, were also used as a model material. Good alignment, controllable fiber size and morphology, as well as a desirable deposition density of fibers were achieved via the optimization of solution and electrospinning parameters. The incorporation of silk proteins into collagen was found to significantly enhance mechanical properties and stability of electrospun fibers. Glutaraldehyde (GA) vapor post-treatment was demonstrated as a simple and effective way to tune the properties of collagen/silk fibers without changing their chemical composition. With 6-12 hours GA treatment, electrospun collagen/silk fibers were not only biocompatible, but could also effectively induce the polarization and neural commitment of stem cells, which were optimized on collagen rich fibers due to the unique combination of biochemical and biophysical cues imposed to cells. Taken together, electrospun collagen rich composite fibers are mechanically strong, stable and provide excellent cell adhesion. The unidirectionally aligned fibers can accelerate neural differentiation of stem cells, representing a promising therapy for neural tissue degenerative diseases and nerve injuries.
Ph.D. in Chemistry, May 2017
Show less
- Title
- ENABLING TOOLS FOR SINGLE CELL ANALYSIS
- Creator
- Li, Zhaoxia
- Date
- 2011-07, 2011-07
- Description
-
Cells are basic functional units of life. A cell function is mediated by proteins and genes, whose distribution and expression level depends...
Show moreCells are basic functional units of life. A cell function is mediated by proteins and genes, whose distribution and expression level depends remarkably on the microenvironment. In the native environment, individual cells behave differently but communicate with surrounding cells. It is imperative to investigate proteins and genes at the single cell level in their native environment. The current representative single cell analysis methods, fluorescent techniques, are the most direct tools to study a single cell. The commonly used methods to measure protein and gene expression levels in single cells are on the basis of fluorescence labeling, such as fluorescence-activated cell sorting and live cell microscopy. They become more powerful when combine with the use of microfluidic devices. The disadvantages of these methods are, (1) their limited sensitivity doesn’t allow the detection of low-abundance proteins and genes; (2) they are unable to detect the cell-to-cell difference within a population; (3) the cell-sorting based method is lack of spatial resolution since the isolation of cells from the natural environment is required for analysis. To tackle these challenges, we established atomic force microscopy based approaches for in-situ gene and protein analysis on a target single live cell. The methods provide the spatial and quantitative information of cells in their native culture environment. They are effective and sensitive to detect low-abundant proteins and genes. In this thesis work, we developed a novel immunofluorescence assisted affinity mapping (IF-AM) method, in which immunofluorescence provides the guidance to locate a desired type of cell in a cell community for performing affinity mapping to quantify the local protein density at a high spatial resolution. Due to the ability of directly assessing proteins of individual cells, the IF-AM method is shown to be a sensitive tool for xiii resolving subtle differences in the local expression of membrane proteins even at low abundance. In the following work, we improved the accuracy of protein quantification by adapting the separation work based calculation rather than the previously used maximum adhesion force based calculation, and established a practical model to analyze the data systematically. We applied the methods to investigate the membrane proteins TRA-1-81 and E-cadherin on human embryonic stem cells. The heterogeneous distribution of TRA- 1-81 and the homogeneous distribution of E-cadherin as well as the quantitative measurement of the protein local abundance provided comprehensive information in understanding the strategy of hES cells to maintain the stemness during cell proliferation and to initiate the differentiation. An mRNA retrieval method was also developed to perform the gene expression analysis on a single cell of a desired type in a cell community. This was achieved by using a functionalized AFM tip as a bait to bind and retrieve mRNA from a desired single cell, followed by sensitive Quantitative Polymerase Chain Reaction (Q-PCR) analysis. The extraction of mRNA from live cells was performed with non/negligible damage to the cells. The established method here enabled the gene expression analysis of individual live cells at the original sites without disrupting the cell context. Thus the gene expression of a target cell and its surrounding cells can be analyzed in parallel, deriving concrete data for understanding the behavior of one cell in concert with that of the surrounding cells in the same or different cell population. The method was successfully applied in the study of side population cells in ovarian cancer cells. The methods developed in this thesis are versatile, and can be broadly applied to the study of different membrane proteins and genes of various cell types.
Ph.D. in Chemistry, July 2011
Show less
- Title
- STUDIES ON RING OPENING REACTIONS AND SYNTHETIC APPLICATIONS OF AZIRIDINIUM IONS
- Creator
- Sun, Xiang
- Date
- 2013, 2013-12
- Description
-
Aziridinium ions are valuable and important intermediates to prepare complex nitrogen containing compounds. Various enantiomerically enriched ...
Show moreAziridinium ions are valuable and important intermediates to prepare complex nitrogen containing compounds. Various enantiomerically enriched -haloamines were synthesized as precursors to generate aziridinium ions in situ. Optically active aziridinium perchlorates or triflates were prepared and characterized using 1H and 13C NMR. Regioselective and enantioselective ring opening reactions of aziridinium ions with diverse nucleophilies including cyanide, azide, amines, hydride and water were extensively studied. An efficient one-pot synthetic route to enantiomerically enriched alcohols and amine precursors was developed. Development of the adequate bifunctional chelators is a critical step for radioimmunotherapy (RIT) of cancer. The practical and scalable regiospecific ring opening reactions of aziridinium ions with macrocyclic amines were utilized for synthesis of a series of bifunctional ligands including 3p-C-NETA, C-NE3TA, 3p-C-NE3TA, 3p-C-DECA, 3p-C-DE4TA, an optically active (S)-C-NE3TA, and bifunctional DTPA analogues for RIT using 90Y and 177Lu. Preparation of bifunctional chelators that can rapidly form 64Cu complexes with high stability is an imminent goal for effective PET imaging. A series of NOTA and NE3TA-based chelators were prepared. NE3TA-based bile acid conjugates and NE3TA- based dual receptor-targeted conjugates were synthesized and possess potential for application of targeted PET imaging with 64Cu.
PH.D in Chemistry, December 2013
Show less
- Title
- BIFUNCTIONAL CHELATING AGENTS FOR POSITRON EMISSION TOMOGRAPHY AND RADIOIMMUNOTHERAPY
- Creator
- Sin, In Seok
- Date
- 2013, 2013-12
- Description
-
Positron emission tomography (PET) is an important molecular imaging modality. To develop new bifunctional chelators for use in more sensitive...
Show morePositron emission tomography (PET) is an important molecular imaging modality. To develop new bifunctional chelators for use in more sensitive PET imaging, 64Cu-radiolabeled chelators have been investigated as promising PET agents. We synthesized and evaluated a macrocyclic chelator (NOTA)-based new bifunctional ligands with different coordination groups. New bifunctional chelators were evaluated for their radiolabeling efficiency with 64Cu, and in vitro complex stability of 64Cu-labeled chelators in human serum was also studied. 64Cu-labeled chelators was further evaluated for in vitro complex stability by EDTA challenge as a rigorous test of transchelation. As a result, chelator D, E, 3p-C-NE3TA, and 3p-C-NOTA were indicated as best chelators and have a promise for 64Cu-based PET imaging. Radioimmunotherapy (RIT) is a highly selective modality of cancer treatment and uses a radiolabeled chelator conjugated with monoclonal antibody. Our continued research of developing new RIT agents radiolabeled with 177Lu, different types of a macrocyclic based bifunctional chelators (DOTA, NOTA and NE3TA)- with variation of denticity, macrocyclic cavity, and bimodality were synthesized. Radiolabeling efficiency of chelators and in vitro complex stability of 177Lu-radiolabeled complex in human serum were evaluated. The effects of different pH and TLC solvents were investigated to confirm the best radiolabeling condition of new chelators with 177Lu. Furthermore, complex stability of 177Lu-radiolabeled chelators in a solution with excess EDTA and various metals was evaluated for transchelation. Therefore, the results of radiolabeling, serum stability and EDTA and metal challenge studies indicate that cavity size and ligand x denticity in chelators affected binding affinity to Lu(III) . 3p-C-DETA was identified as the best chelator for further research of RIT agent.
M.S. in Chemistry, December 2013
Show less
- Title
- DEVELOPMENT OF NANOPARTICLE APPLICATIONS IN CELL IMAGING, BIOASSAY AND REACTIVE OXYGEN SPECIES DETECTION BASED ON SURFACE-ENHANCED RAMAN SPECTROSCOPY
- Creator
- Yiming, Huang
- Date
- 2011-08, 2011-07
- Description
-
After mid-1970, the exploration of surface-enhanced Raman scattering (SERS) has been studied by many research groups. Compared to traditional...
Show moreAfter mid-1970, the exploration of surface-enhanced Raman scattering (SERS) has been studied by many research groups. Compared to traditional Raman spectroscopy, enormous cross section of molecules can be obtained in SERS by placing the molecules within the electromagnetic field present in metal surfaces. This enhancement is due to resonance between the optical field and surface plasmon of the metal substrate. Nanoshells which are composed of a silica core and a thin gold shell can greatly enhance Raman scattering without the need to pre-aggregate the particles, due to their tunable optical property. In our study, we synthesized nanoshells as our SERS substrates for Raman tags. The stability of nanoshells coated with three different self-assembled monolayers containing poly(ethylene glycol) (PEG) molecules has been studied. Probes with Raman active PEG molecules have been delivered and imaged in macrophage cells and MCF7 cells, based on SERS technique. The benefits of this imaging technique we developed here are: 1) it is faster; 2) it requires less preparation; 3) it can provide the information of nanoshells in a semi-quantitative way in vitro. We also developed a rapid and easy-to-execute half-sandwich bioassay for the detection of low volumes (< 2 μL) of antigens on nitrocellulose membrane, based on SERS. Multiple antibodies with MW from 18.2 kDa to 170 kDa were bioconjugated to polymers and grafted to nanoshell surface to detect antigens on the membrane. SERS-based biosensors were tagged with Raman active PEGs for recognition and quantification. Here, the bioassay showed great sensitivity to very low concentration x viii of antigens and multiplexed testing have been successfully conducted on different antigens simultaneously. Moreover, SERS-based novel reactive oxygen species (ROS) sensors were designed by establishing mixed-monolayer consisting of poly(ethylene) glycol thiol (PEGSH) and either 4-nitrobenzenethiol (4-NBT) or 4-mercaptophenol (4-MP) on the surface of nanoshells. By analyzing the changes in the molecular Raman spectrum, we were able to track the production of hydroxyl radicals in low concentrations (~ 10 μM). The sensors have been delivered into the cells and did not show significant oxidative stress to the cells. Therefore, these designed sensors are very promising for tracking ROS produced by cells when they are under oxidative stress.
Ph.D. in Chemistry, July 2011
Show less
- Title
- Amorphous Solid Polymer Electrolytes for Lithium-Ion Batteries
- Creator
- Lee, Sooyun
- Date
- 2012-07-05, 2012-07
- Description
-
The rechargeable lithium-ion batteries that started in the early 1990’s, are extensively used in lots of electronic devices, including...
Show moreThe rechargeable lithium-ion batteries that started in the early 1990’s, are extensively used in lots of electronic devices, including cellular phones, laptop computers, camcorders, cameras and medical devices. Due to high energy and power density of lithium-ion batteries, they are one of the most useful batteries, and lots of researches and developments are still progressing, especially in electronic vehicle / hybrid electric vehicle (EV/HEV). However, current lithium-ion batteries have many problems, especially those related to its electrolyte system. Because this component contains flammable organic solvents, they have several disadvantages, such as leakage, instability, and difficulty in manufacture of large flat types of batteries. To eliminate these problems, the studies on Solid Polymer Electrolyte (SPE) system are now an active research area. In this thesis work, three different approaches have been executed to improve electrolyte properties of lithium-ion batteries. As a based material tosylate poly(ethylene glycol) was prepared, and a plasticizer was synthesized and incorporated into a conventional poly(ethylene oxide)-based Solid Polymer Electrolyte systems. First, to increase amorphousness in plasticizer, bisphenol-A was introduced, which has free rotating unit and only ionic conductivity was measured to verify. Secondly, hyperbranched poly(p-hydroxy styrene) derivatives were synthesized and used as the base matrix in SPEs. Polymers which have higher order of branching exhibited higher ionic conductivity, and it was assumed that branching structure lowered crystallinity. Finally, we synthesized 3-chloropropanesulfonyl-trifluoromethanesulfonylimide (LiCPSI) and attached to hyperbranched poly(p-hydroxy styrene) to verify that how hyperbranched structure would affect the ionic conductivity. Major characterization techniques include ionic conductivity, cyclic voltammetry (CV) and thermogravimetric analysis (TGA).
M.S. in Chemistry, July 2012
Show less
- Title
- FROM EXPLORATION TO RATIONAL DESIGN OF SELECTIVE PROPANE DEHYDROGENATION CATALYSTS
- Creator
- Hu, Bo
- Date
- 2015, 2015-12
- Description
-
Light olefins, e.g., ethene and propene, are important building blocks of chemical industry for the production of fuels, polymers, lubricants...
Show moreLight olefins, e.g., ethene and propene, are important building blocks of chemical industry for the production of fuels, polymers, lubricants and other fine chemicals. Due to the rapidly increasing production of shale gas, conversion of small alkanes in the shale gas, e.g., ethane and propane, to their corresponding olefins via alkane dehydrogenation could be an important industrial process. This thesis has focused on exploring the novel single site heterogeneous catalysts for selective alkane dehydrogenation and investigating the general principles of rational catalyst design to achieve a better performing (e.g., more active, more stable, highly selective) dehydrogenation catalyst. Based on the observed reactivity of ZnO for olefin hydrogenation and activity of Zn-ZSM-5 catalysts for alkane activation, catalytic properties of isolated Zn2+ were first explored for propane dehydrogenation. The 3-coordinate Zn in single site Zn/SiO2 catalyst was demonstrated to be the catalytically active species that was highly selective for the generation of propene by propane dehydrogenation. DFT calculations revealed that slow β-hydride elimination of alkyl intermediates limited the overall activity of single site Zn/SiO2 catalyst. Thus, single site Co/SiO2 was also prepared in order to take the advantage of fast β-hydride elimination. The higher activity of single site Co/SiO2 emphasized the potential of transition metals for alkane dehydrogenation, and propane dehydrogenation reactivity of transition metals was further explored by investigating single site Fe/SiO2 catalyst. By comparing with metallic Fe nanoparticles and bulk phase Fe oxides catalysts, the 3-coordinate single site Fe2+ was also suggested to be the catalytically active species for selective propane dehydrogenation. However, the catalytic activity of single site Fe/SiO2 catalyst was lower than that of Zn/SiO2. Such result suggested heterolytic cleavage of C-H bonds was slow for transition metals, e.g., Co and Fe, due to their weak Lewis acidity, and it may mitigate the advantages gained in rapid β-hydride elimination. An exploration of ligand effects for improving heterolytic cleavage over single site heterogeneous catalysts was performed. The strength of metal oxygen bond governed by ligand electron donating effects and ligand basicity were found to be the critical chemical descriptors for a facile heterolytic cleavage. Those observed principles of ligand effects would lead to a new strategy of rational catalyst design for a superior dehydrogenation catalyst.
Ph.D. in Chemistry, December 2015
Show less
- Title
- HYDROGEN BOND CATALYZED EPOXIDATION AND DIHYDROXYLATION OF UNACTIVATED ALKENES
- Creator
- Kang, Lili
- Date
- 2011-12, 2011-12
- Description
-
Asymmetric epoxidation and dihydroxylation have been studied over decades using transition metals and chiral ligands. This research focused on...
Show moreAsymmetric epoxidation and dihydroxylation have been studied over decades using transition metals and chiral ligands. This research focused on metal free, hydrogen-bonding activation of the oxidant, such as hydrogen peroxide. In order to activate hydrogen peroxide, different types of catalysts, including BINOLs, calixarenes and carboxylic acids were synthesized, characterized and tested. The activity tests showed that carboxylic acids were able to activate hydrogen peroxide and alkyl hydroperoxides to give epoxides and diols as products. Various carboxylic acids, such as commercial available achiral and chiral carboxylic acids, dicarboxylic acids, as well as synthesized trans- and cis-dicarboxylic acid, were tested with different substrates to maximize the yield and enantioselectivity. A current reaction system uses 10 mol % catalyst, no solvent and provides the epoxide with 70% yield and 60% ee over 24 hours.
M.S. in Chemisty, December 2011
Show less
- Title
- NEW SOLID AND LIQUID ELECTROLYTES FOR LITHIUM RECHARGEABLE BATTERIES
- Creator
- Mei, Xinyi
- Date
- 2016, 2016-12
- Description
-
Currently, rechargeable lithium batteries are widely used in our consumer electronic products, including cell phones, laptop computers, and...
Show moreCurrently, rechargeable lithium batteries are widely used in our consumer electronic products, including cell phones, laptop computers, and cameras and so on. They have extraordinary potential for application in electric and hybrid electric vehicles by their high energy and power density[1]; however, the major challenges include the higher cost, safety issues related to the solvents and conductibility at lower temperatures are still waiting to be fixed. In this Ph.D. thesis, two types of rechargeable lithium batteries: lithium-ion batteries and lithium-sulfur batteries are discussed. Two different approaches are presented, in the direction of achieving an enhanced electrolyte system for rechargeable lithium batteries. One approach is based on the conventional poly (ethylene oxide) (PEO)-based solid polymer electrolyte (SPE) system. The key feature of this approach is the preparation of nanoparticle lithium salts (NPLS) and low lattice energy fluorinated di-lithium salts. The ionic conductivities of these PEO-based SPEs were markedly improved, due to a decrease in the glass transition temperature (Tg) of the polymer. For lithium-sulfur (Li-S) batteries, the polysulfide shuttle (PSS), caused by the dissolution of cathode polysulfide intermediates into the electrolyte, has delivered a mortal blow to nearly every attempt at obtaining a viable Li-S battery. So, another approach involved the strategic design and synthesis of a series of room temperature ionic liquids (RTILs) to prevent PSS: i) Three series of di-cationic ionic liquids (DILs) are synthesis and characterized. DILs-based electrolytes displayed excellent properties, such as non-flammability, high electrochemical stability and thermal stability. ii) Twelve new asymmetric fluorinated RTILs (FRTILs) were also introduced. The FRTILs based electrolytes showed even better properties than DILs-based electrolytes.
Ph.D. in Chemistry, December 2016
Show less
- Title
- VANADIUM OXIDE BASED MATERIALS AS OXIDATIVE DEHYDROGENATION CATALYST: SYNTHESIS, CHARACTERIZATION AND PROPERTIES
- Creator
- Aydemir, Kadir
- Date
- 2013, 2013-12
- Description
-
The project concerns with design, synthesis and characterization of molecular and extended structure materials composed of vanadium oxides and...
Show moreThe project concerns with design, synthesis and characterization of molecular and extended structure materials composed of vanadium oxides and evaluation of their catalytic oxidative dehydrogenation (ODH) properties. A long-term objective is to develop an understanding of the structure-property relationships in ODH catalysts. Chapter 1 provides an overview of the field of metal oxides, polyoxometalates, and catalytic oxidative dehydrogenation of propane. This chapter also defines the research problem concerning this thesis and its fundamental and practical significance. Chapters 2-4 describe the synthesis, characterization and ODH properties of a select number of structurally correlated vanadium oxide based materials. The ODH catalysts studied in this work includes molecular compounds - (NH4)8[VIV 12VV 6O42(SO4)0.85(VO4)0.15]·10H2O (NH4-POV) and NH4V10O28, layered structure materials - MgVV 2VIV 2O10·4H2O (MV4) and V2O5, a chain structure - NH4VO3, and a nanostructured three-dimensional framework material - [Co3V18O42(H2O)12 (XO4)]·24H2O (X = V, S) (Co-POV). Their catalytic activities for ODH of propane to propylene - an important industrial feedstock material, were studies and compared in an attempt to get an insight of the structure-property relationships. Chapter 2 discusses synthesis and characterization of a new mixed-valence vanadate, MgVV 2VIV 2O10·4H2O (MV4), an extended structure solid, synthesized hydrothermally and characterized by single-crystal X-ray diffraction, spectroscopic methods, thermogravimetric analyses and temperature dependent magnetic measurements. MV4 represents the first model compound for the naturally occurring mineral melonovanadite, Ca2VV 4VIV 4O20·10H2O. MV4 is an important material with xv structural and electronic properties that are attractive for making it a potential promising ODH catalyst. The framework structure in MV4 consists of vanadium oxide layers crosslinked by {Mg(H2O)4} groups. The vanadium oxide layers are composed of edge shared {VIVO5} square pyramids, forming {V2O8} dimers, which share corners with {VVO4} tetrahedral units. Chapter 2 also discusses synthesis of a novel mixed-valence molecular polyoxovanadate - (NH4)8[VIV 12VV 6O42(SO4)0.85(VO4)0.15]·10H2O (NH4-POV) and its characterization by single-crystal X-ray diffraction, spectroscopic and thermogravimetric analyses. Structure consists of {V18O42} shell composed of 18 edge sharing {VO5} square pyramids, hosting a tetrahedral species {XO4} (X = S, V). Highly reduced molecular structure of NH4-POV makes it a promising ODH catalyst. Chapter 3 describes the ODH properties of a polyoxovanadate based openframework material - [Co3V18O42(H2O)12 (XO4)]·24H2O (X = V, S) (Co-POV). It is composed of {V18O42(XO4)} (X = S, V) building units, which is the molecular cluster present in NH4-POV, interconnected by {-O-Co-O-} bridging groups. Alternatively, since the building unit clusters {V18O42XO4} can be viewed as derived from sheets of V2O5, the 3-D structure of Co-POV can be viewed as made of V2O5 and CoO units. Therefore the ODH property of Co-POV was compared with the ODH property of the molecular cluster NH4-POV on one hand and with the V2O5 and CoO on the other hand. Co-POV was shown to have superior catalytic performance for ODH of propane as compared with its constituent metal oxides, V2O5, CoO and their mixture. ODH of propane reaction over NH4-POV catalyst has higher propylene selectivity of above 60% at moderate temperatures as compared to 37% selectivity of Co-POV catalyst. Supporting NH4-POV on high surface area γ-alumina was shown to improve propane xvi conversion drastically. In this study, highest propylene yield of 13% was achieved at 550 °C by supported NH4-POV catalyst. On the other hand, MV4 showed catalytic activity at marginally low temperature 200 °C due to propane activation energy (Ea) of 27 kJ/mol, the lowest Ea found in this study. Co-POV was utilized as a model compound to describe the effect of varying doses of γ-ray irradiation on the catalytic ODH properties of polyoxometalates for the first time. γ-ray irradiation enhanced catalysts’ selectivity to propylene during the oxidative dehydrogenation of propane. Chapter 4 describes full characterization of the catalysts studied in this work by powder X-ray diffraction analysis, temperature programmed reduction, X-ray absorption fine structure, BET surface area analysis and scanning electron microscopy. Structural changes of catalysts were investigated by comparing characterization results of asprepared, oxygen pretreated and post-catalysis (spent) catalysts. New vanadium oxide phases formed upon oxygen pretreatment. In general, ODH catalysis did not further alter catalysts’ structures.
PH.D in Chemistry, December 2012
Show less
- Title
- ANALYSIS OF LOW DIMENSIONAL MAGNETIC SYSTEMS CONTAINING CHROMIUM(III) AND COBALT(II) LIGATED BY THE SQUARATE LIGAND: MAGNETIC CHARACTERIZATION, BIOLOGICAL CHARACTERIZATION, INSTRUMENTAL DEVELOPMENT, AND SOFTWARE DEVELOPMENT
- Creator
- Mcneely, James Halley
- Date
- 2013, 2013-07
- Description
-
A large series of Chromium(III) and Cobalt(II) complexes containing the C4O4 (squarate) ligand have been synthesized and characterized...
Show moreA large series of Chromium(III) and Cobalt(II) complexes containing the C4O4 (squarate) ligand have been synthesized and characterized magnetically. These complexes include simple dimeric Cr(III) systems that display a wide range of isotropic exchange couplings. One of these dimers shows interesting biological activity pertaining to the cellular uptake of glucose. This same compound also enhanced proton relaxation in T1 and T2 NMR studies. Computational work done on these dimeric systems showed excellent agreement with experimental results, and was used to confirm the structure of the complexes. The effect of the bridging squarate ligand was also studied computationally. The squarate ligand significantly contributed to the exchange coupling in the dimeric systems, and was shown to behave countercomplementary to the μ-hydroxo bridges. This is the first explicit observation of countercomplementarity in Chromium(III) systems. Co3(OH)2(C4O4) · 3H2O, a cobalt chain structure featuring an interesting low temperature spin-idle phase, was also synthesized. It was found that based on storage conditions, this compound either stays stable after grinding or transforms into the structure Co(C4O4)(H2O)2. In addition, grinding the sample shows an out-of-phase maxima at ≥6 K that has a frequency dependence characteristic of a spin glass. A new software package was also developed to simulate Electron Paramagnetic Resonance (EPR) spectra using full numerical diagonalization of the secular equation. This program was written using Wolfram Mathematica, and holds several advantages over currently available software. These advantages include a graphical user-interface and parallelization capabilities
PH.D in Chemistry, July 2013
Show less
- Title
- UNIDIRECTIONALLY ALIGNED COLLAGEN / COLLAGEN COMPOSITE FIBRILS AND THEIR MODULATION OF CELL BEHAVIORS
- Creator
- Li, Wen
- Date
- 2016, 2016-05
- Description
-
One of the main goals of tissue engineering is to create new functional scaffolds with desired chemical and physical features mimicking the...
Show moreOne of the main goals of tissue engineering is to create new functional scaffolds with desired chemical and physical features mimicking the native micro-environment and modulating cell functions or behaviors. As collagen is abundant in the extracellular matrix (ECM) of native tissues, it is widely used to generate artificial scaffolds in in vitro. In this thesis research, aligned collagen and collagen-composite fibirls (COL-CNT and COLI-COLIII) were achieved via epitaxial growth of collagen on muscovite mica surface. It was found that hdpPSCs interacted with collagen fibrils by deforming the cell shape, harvesting the nearby collagen fibrils, and reorganizing the fibrils around the cell body to transform a 2D matrix to a localized 3D matrix. Such a unique 3D matrix prompted high expression of β-1 integrin around the cell body that mediates and facilitates the stem cell differentiation toward neural cells. By compositing collagen with carbon nanotube (CNT), aligned COL-CNT fibril was obtained with 3 times stiffer than pure collagen fibril and a 2 nm D-period increase. The anisotropic morphology and high stiffness of COL-CNT fibrils greatly facilitated the elongation of SKOV3 cells byregulating the cell-matrix adhesion, cytoskeleton arrangement and cell migration rate, finally promoted the epithelial-mesenchymal transition (EMT) of the SKOV3 cells. Aligned COLI-COLIII hybrid collagen fibrils exhibit higher stiffness than pure COLIII and stronger binding affinity than pure COLI. It is found that with the combined advantages of stiffness and binding affinity, aligned COLI-COLIII fibrils lead to fibroblast cytoskeleton elongation and enhanced cellular elasticity with stronger traction strain sulfured, which improves collagen synthesis ability of fibroblast with a higher collagen I percentage.
Ph.D. in Chemistry, May 2016
Show less