Search results

Title: NEUTRON PRODUCTION IN THE M2 MUON BEAM LINE AT CERN
Creator: Draeger, Emily
Date: 2014, 2014-05
Description: Spallation neutrons produced from cosmic ray muons are a major source of backgrounds in underground physics experiments. Experiments have been...
Show moreSpallation neutrons produced from cosmic ray muons are a major source of backgrounds in underground physics experiments. Experiments have been done to study spallation neutron production and yield, but our understanding of these processes is still limited. There are various interactions that can produce spallation neutrons. Most of these production mechanisms are fairly well understood; much of the uncertainty in our understanding of spallation neutrons lies in mechanisms such as virtual photon exchange and the assumptions used to calculate the photonuclear cross section. Even the experiments that have been carried out do not agree with each other or theoretical calculations. Spallation neutron production mechanisms are discussed, as well as a new experiment to study spallation neutrons. The impact of this study on current and future underground physics experiments is also explored.
PH.D in Physics, May 2014
Show less

Title: INTELLIGENT PROCESS-CONTROL WITH SUPERVISORY KNOWLEDGE-BASED SYSTEMS
Creator: Kendra, S. J., Basila, M. R., Cinar, A.
Date: 1994-06
Description: The integration of a supervisory knowledge-based system (KBS) with a multivariable control system is examined to provide robust multivariable...
Show moreThe integration of a supervisory knowledge-based system (KBS) with a multivariable control system is examined to provide robust multivariable control of a chemical reaction process. The supervisory KBS is capable of monitoring the process to detect system faults as well as assessing control system performance. If a control system performance deficiency is detected, the KBS formulates and implements the necessary corrective controller tuning. This adaptive capability reduces the conservatism of the robust control system. The underlying mechanisms are discussed and the re-tuning ability of the KBS is illustrated by using rigorous simulations of a chemical reaction process
Endnote format citation
Show less

Title: Planning the 21st Century Urban Farm: From High Rise to Neighborhood (sequence unknown), IPRO 336 - Deliverables: IPRO 336 Final Report F09
Creator: Bhatti, Talha, Binet, Adrien, Bredau, Jason, Chen, Emily, Davis, Jacob, Gaonkar, Gaurav, Garcia, Raul, Guerrero, Fernando, Gulling, Richard, Kagehiro, Michael, Moshfeghian, Elnaz, Nunez-gimeno, Jose, Phillips, Zachary, Plumb, Isaac, Ryan, Emily, Skaggs, Jake, Sobon, Konrad, Valmores, Travis
Date: 2009-12
Description: The purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. The growing problems regarding the...
Show moreThe purpose of this IPRO is to establish a strong foundation for the future of urban agriculture. The growing problems regarding the traditional methods of agriculture, and the rate of growth of the world population, the team plans to design a method to grow food more efficiently and economically in urban areas. The team is looking at large, industrial warehouse-type buildings that have outlived their primary use, and creating a plan that utilizes these buildings to grow enough food for the surrounding communities.
Sponsorship: John Edel of Bubbly Dynamics, LLC
Deliverables for IPRO 336: Planning the 21st Century Urban Farm: From High Rise to Neighborhood for the fall 2009 semester
Show less

Title: Planning for Human Implantation of a Cortical Visual Prosthesis (sequence unknown), IPRO 334 - Deliverables
Creator: Bern, David, Chen, Shanyl, Deroo, Mary, Gorski, David, Kelly, Thomas, Leasenby, Alex, Li, Zhi, Pyrkh, Hanna, Subhani, Maham, Taneja, Aanchal
Date: 2009-12
Description: The Intracortical Visual Prosthesis is based upon that concept that by implanting a large number of subminiature electrodes within the human...
Show moreThe Intracortical Visual Prosthesis is based upon that concept that by implanting a large number of subminiature electrodes within the human visual cortex, coordinated temporal-spatial image information can be artificially communicated to the human visual cortex in the form of electrical currents, acting as a sensory substitute for normal vision.
Sponsorship: IIT Laboratory of Neural Prosthetic Research
Deliverables for IPRO 334: Planning for Human Implantation of a Cortical Visual Prosthesis for the fall 2009 semester
Show less

Title: POWER ANALYSIS AND CONTROL OPTIMIZATION OF A HIGH GAIN RESONANT DC-DC CONVERTER
Creator: Wu, Haowen
Date: 2017, 2017-05
Description: Applications of DC-DC converter require a high power, high efficiency performance, especially for automotive applications and renewable energy...
Show moreApplications of DC-DC converter require a high power, high efficiency performance, especially for automotive applications and renewable energy applications. A desired converter should have a fast response, stable output in different conditions. This thesis studies a novel high gain DC-DC resonant converter and its control. Based on the circuit analysis and operation evaluation, feed-forward and feedback control methods are proposed in order to achieve stability under variety of changes. Moreover, circuit topology is investigated in response to the efficiency improvement. Simulations in PSIM, PLECS and MATLAB Simulink have been carried out to validate the controller design and topology development. The simulation results are in consistence to the theoretical analysis. The overall high efficiency at nominal operating point is further increased.
M.S. in Electrical Engineering, May 2017
Show less

Title: NOVEL FAULT DIAGNOSTIC TECHNIQUE AND UNIVERSAL SENSOR FOR PERMANENT MAGNET ELECTRIC MACHINES USING SEARCH COILS
Creator: Da, Yao
Date: 2012-04-23, 2012-05
Description: Over the past decade, permanent magnet synchronous machines (PMSMs) have gained significant popularity in industry, such as wind turbines and...
Show moreOver the past decade, permanent magnet synchronous machines (PMSMs) have gained significant popularity in industry, such as wind turbines and electric vehicles, owing to their high efficiency, high output power to volume ratio, and high torque to current ratio. In these mission critical applications, an unexpected fault or failure of the machine could lead to very high repair or replacement cost, or even catastrophic system failure. Therefore a robust and reliable health monitoring and fault diagnostic approach is desired, which could help in scheduling preventive maintenance to lengthen their lifespan and avoid machine failure. This dissertation presents a novel multi-faults diagnostic approach using search coils. These search coils are wound around armature teeth, so they typically need to be installed during manufacturing. But its immunity to high frequency harmonics makes it suitable for inverter/rectifier fed motors or generators, such as wind turbines and automotive systems. In addition, this method does not require the knowledge of proprietary constructional details of the machine. Since the electromagnetic flux is directly measured in this method, it provides much more information than any other scheme: the direction of eccentricity and the location of shorted windings. Furthermore, this method is also capable of evaluating the severity of each fault, which is of significant importance in mission critical applications such as automotive, aerospace and military applications. In addition to these uses, the search coils can be used as a universal sensor to estimate phase current or rotor position, which are critical information in a PMSM close-loop control, which allow it to work as a backup sensor for fault tolerant operation. The proposed fault detection scheme and universal sensor concept have been tested under several scenarios with Finite Element Analysis and experimentally validated.
Ph.D. in Electrical Engineering, May 2012
Show less

Title: CELL-MATRIX INTERACTIONS IN ADIPOSE TISSUE FUNCTION
Creator: Vaicik, Marcella K.
Date: 2015, 2015-07
Description: The overall goal of this work is to apply in vivo and in vitro models to study the basement membrane protein laminin α4 (lama4) in adipocyte...
Show moreThe overall goal of this work is to apply in vivo and in vitro models to study the basement membrane protein laminin α4 (lama4) in adipocyte function. Adipose tissue accumulation, lipogenesis, and structure were examined in mice with a null mutation of the lama4 gene (Lama4−/−) and compared to wild-type animals (Lama4+/+). The Lama4−/−mice phenotype was investigated to evaluate if the differences were due specifically to the adipose tissue function. Physical activity and food intake does not differ between Lama4+/+ and Lama4−/− mice. However, Lama4−/− mice have a significantly increased metabolic rate at 25°C and 16°C compared to Lama4+/+ mice. In contrast, in thermoneutral conditions at 30°C both Lama4+/+ and Lama4−/− mice exhibit equivalent metabolic rates. Interestingly, when room temperature housed mice fat pads were evaluated with immunohistochemistry, Lama4−/− mice exhibit significantly increased UCP-1 expression in subcutaneous adipose. These results suggest that beiging, white to brown adipocytes, in subcutaneous adipose tissue in Lama4−/− mice may lead to decreased adipose tissue accumulation and improved metabolic function. While animal models indicate the absence of lama4 results in more beiging in subcutaneous adipose tissue, an in vitro tissue engineered model was developed to study the adipocyte function in a controlled microenvironment. Primary cell spheroids developed from Lama4+/+ and Lama4−/− were incorporated into synthetic poly(ethylene glycol) (PEG) hydrogels within a range of stiffnesses. When the cells were given the same chemical cues their functions differed depending upon microenvironment stiffness. Beige function in adipocyte cells in 3D can be influenced by matrix stiffness. In conclusion, the laminin alpha 4 basement membrane protein absence in adipose tissue results in adipocyte functional changes in vivo. The Lama4−/− mice have resistance to diet induced weight gain and increased metabolic rate at room temperature and when cold challenged. The Lama4−/− mice had increased beiging in the subcutaneous depot. Additionally, a tissue engineered model was developed to further study cell-ECM interactions first identified in an animal model. These in vivo findings and the engineered model of adipose tissue have great potential for studying obesity and other adipose related diseases. Future work will require continued interdisciplinary collaboration towards the successful identification and screening of novel therapeutics using engineered tissue models.
Ph.D. in Biomedical Engineering, July 2015
Show less

Title: Financial Incubators, India: panel copy
Creator: Shah, Shruti
Date: 2010-05-01, 2010-05

Title: Developing Web Applications for the Northern Illinois Hockey League (sequence unknown), IPRO 308 - Deliverables: IPRO 308 Midterm Presentation F09
Creator: Lucchesi, Kristin, Barksdale, Dustin, Hays, Julian, Bartus, Kryzystof, Perkins, William, Savage, Christopher, Scheer, Colin, Semenov, Vladimir, Vidutis, Mantas
Date: 2009-12
Description: The NIHL is the largest hockey league in Illinois. It is also the largest youth all star hockey league in the US, serving over 300 youth teams...
Show moreThe NIHL is the largest hockey league in Illinois. It is also the largest youth all star hockey league in the US, serving over 300 youth teams and over 4,000 players. The team's purpose is to make the NIHL a web-based scheduling and scoring applications that can support their annual operations.
Sponsorship: Northern Illinois Hockey League(NIHL)
Deliverables for IPRO 308: Developing Web Applications for the Northern Illinois Hockey League for the fall 2009 semester
Show less

Title: A system of multiplex telephony by the use of vacuum tubes
Creator: Arnold, E. H., Throop, A. R.
Date: 2009, 1919
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/systemofmultiple00arno
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaves 44-45

Title: FABRICATION, CHARACTERIZATION AND RELEASE STUDIES OF LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES
Creator: Zhao, Ziqian
Date: 2015, 2015-07
Description: Nanocomposites exhibit enhanced physical properties including mechanical strength, thermal stability, and gas barrier properties. The...
Show moreNanocomposites exhibit enhanced physical properties including mechanical strength, thermal stability, and gas barrier properties. The development of nanocomposites has led to applications in food industry, mostly in food packaging. The application of nanocomposites in food packaging may extend the shelf life of a food, thus increasing the market value for manufactures. However, there is limited data and research to assess the risk of exposure of nanomaterials to consumers. This project aims at evaluating the factors that can influence the release of nanomateirals in low density polyethylene/clay nanocomposites films. Nanocomposites based on low density polyethylene (LDPE), containing 1, 3, 5 and 7 wt.% of Cloisite 20A and maleic anhydride-grafted polyethylene (MAPE) as a compatibilizer were prepared by melt compounding and characterized in this thesis project. Cloisite 20A is mostly composed of montmorillonite (MMT), which is commonly used as a nanoscale size filler. LDPE/Clay nanocomposite films containing MMT and three mass equivalents of MAPE were successfully extruded into thin films with good optical clarity. The materials were characterized by using transmission electron microscope (TEM), thermogravimetric analysis (TGA), oxygen permeation analysis and a material testing machine. Important properties such as tensile modulus, oxygen transmission rate, thermal resistance and glass transition temperature were measured. Nanocomposite films were immersed in three kinds of food simulants (absolute ethanol, 3% acetic acid and deionized water). Storage time, storage temperature and percent fill of clay were evaluated as the factors that can influence the release of nanomaterials. The content of released of Al, Mg, and Si was quantified using inductively coupled plasma mass spectrometry (ICP-MS). Mg, Al and Si were continuously released from nanocomposite films in duration of 30 days. Fastest releasing speed was found in 3% aqueous acid at 75 °C, and lower temperature can largely decrease the release of nanoparticles. This project is an initial attempt to assess the risks from the use of nanocomposites as food packaging.
M.S. in Food Safety and Technology, July 2015
Show less

Title: PA 508 Student Computer Usage Survey: PA508 Student Survey 2010 Results
Creator: Ahrens, Aric G.
Date: 2010-01-19, 2010-01-19
Description: Included are a survey, and the results in graphic form. The survey was designed to find out how and where the Chinese contingent of Master of...
Show moreIncluded are a survey, and the results in graphic form. The survey was designed to find out how and where the Chinese contingent of Master of Public Administration students used computers. The focus was to determine whether they preferred to use computers on the Downtown Campus, where classes were taught, or on Main Campus, where most of the students lived.
Show less

Title: Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 MidTerm Presentation F08
Creator: Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
Date: 2008, 2008-12
Description: The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less

Title: SURVIVAL OF SALMONELLA ON CHAMOMILE, PEPPERMINT AND GREEN TEA DURING STORAGE RELATED TO TEMPERATURE AND HUMIDITY
Creator: Chen, Zhengzai
Date: 2013-04-24, 2013-05
Description: Botanical/herbal teas may contain antimicrobial compounds that will affect the survival and persistence of the native as well as contaminant...
Show moreBotanical/herbal teas may contain antimicrobial compounds that will affect the survival and persistence of the native as well as contaminant microflora. Although Salmonella are known for their ability to survive in low water activity environments, their survival on dry botanical/herbal teas has not been examined. The purpose of this work is to determine the survival of Salmonella on three types of teas, chamomile peppermint, and green tea under different storage conditions. In addition, the ability of Salmonella to grow in tea brewed with contaminated product was examined. A cocktail of four Salmonella serovars was inoculated onto 1 g samples of chamomile, peppermint, and green tea to give a starting cell population of approximately 10 log cfu/g. The inoculum was allowed to dry prior to storage at 25 °C and 35 °C and at low (<30% RH) and high (> 90% RH) humidity levels. At different time intervals up to 6 months, triplicate samples at each condition were evaluated for surviving Salmonella populations. In addition, samples were used to produce a low-temperature (sun) brewed tea and inoculated. Growth was assessed after 24 hr. Under the four storage conditions tested, survival followed the order 25°C/low RH > 35°C/low RH > 25°C/high RH > 35°C/high RH. Salmonella losses at 25°C/low RH occurred primarily during drying, after which populations showed little declines over 6 months. In contrast Salmonella decreased below detection after 45 days at 35°C and high RH in all teas tested. All teas tested supported the growth of Salmonella after brewing. Storage conditions significantly impact the survival of Salmonella in dried herbal teas. If Salmonella survives after storage, it may also survive and grow after a home brewing process.
M.S. in Food Safety and Technology, May 2013
Show less

Title: IN VITRO STUDIES OF VIRULENCE SUPPRESSION ON P. AERUGINOSA BY PHOSPHATE / POLYPHOSPHATE-LOADED NANOPARTICLES
Creator: Yin, Yushu
Date: 2015, 2015-07
Description: Critically ill patients harbor multi-drug resistant pathogens that can activate their virulence in the response to low nutrient conditions and...
Show moreCritically ill patients harbor multi-drug resistant pathogens that can activate their virulence in the response to low nutrient conditions and host stress derived factors. It was recently shown that the oversupply of inorganic phosphate to bacterial environment can profoundly suppress the virulence of pathogens. Here we hypothesized that phosphateand/ or polyphosphate-loaded nanoparticles can present a tool to deliver and slowly release phosphate in pathogen-rich niche, thereby suppressing bacterial virulence. In this work, a designed study on effect of different phosphate levels (including the phosphate released from hydrogel nanoparticles) on virulence of P. aeruginosa is addressed. In this work, we developed formulations for preparing hexametaphosphate-loaded nanoparticles on the basis of that for phosphate loaded nanoparticles. We utilized inverse miniemulsion polymerization in the synthesis of these nanoparticles. Polyethylene glycol diacrylate (PEGDA, moleculat weight of 575 Da) and N-vinyl pyrrolidone (molecular weight: 111.14 Da ) were chosen to be the initial monomers because the main crosslinker, polyethylene glycol is a kind of biocompatible material that has been approved by the U.S. Food and Drug Administration (FDA). Several parameter could be adjusted among the experiment. We selected the monomer mole fraction of PEGDA-575 as our parameter. After the synthesis, a nanoparticle size distribution between 110 nm and 150 nm was obtained. And these nanoparticles were proved to be able to release phosphate and hexametaphosphate as drug molecules. Although there were release bursts in the test of release kinetics, the crosslink density could be adjusted in following researches. The second part of this study is to test the virulence suppression effect of the nanoparticles in in vitro experiment on a kind of opportunistic pathogen, P. aeruginosa. This kind of gram-negative bacteria is one of the common intestinal microbial communities. We presented the strategy of suppressing virulence while containing rather than killing the bacteria. As a result, polyphosphate loaded nanoparticles showed to be the most effective one among several experiment groups. This result gave this study a promising future in further research in several aspects, such as in vivo test in biomedical and biomedical engineering.
M.S. in Chemical Engineering, July 2015
Show less

Title: Impacts of Sulfur Capture Technology in Coal Power Plants (sequence unknown), IPRO 302 - Deliverables: IPRO_302_Project_Plan_final
Creator: Contreras, Abraham, Dickman, Justin, Enadeghe, Gregory, Garcia Rodriguez, Hector, Haddad, Michael, Kyle, Ryan, Mongillo, Michael, Murphy, Ryan, Shonubi, Oluwaseun, Swillum, Bryce, Wolber, Brian, Worthon, Terrika
Date: 2009-12
Description: The IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United...
Show moreThe IPRO team was investigating the net impact of sulfur capture technologies used in current and next generation power plants in the United States. It planned to use this knowledge to determine which sulfur capture technologies produce the greatest benefit for industry and society and to find the marketability of the sulfur byproducts created in these power plants.
Sponsorship: Sargent & Lundy, LLC
These are the deliverables for IPRO 302: Impacts of Sulfur Capture Technology in Coal Power Plants from the Fall 2009 semester.
Show less

Title: Transients on transmission lines and modern protective devices
Creator: Muelleman, Joseph P., Smely, James
Date: 2009, 1920
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/transientsontran00muel
Thesis (B.S.)--Armour Institute of Technology

Title: DEVELOPMENT OF A HIGH ANGULAR RESOLUTION DIFFUSION IMAGING TEMPLATE AND PROBABILISTIC CONNECTIVITY-BASED ATLAS OF THE HUMAN BRAIN
Creator: Varentsova, Anna
Date: 2016, 2016-05
Description: Digital human brain atlases consisting of MRI-based templates and semantic labels delineating different brain regions serve a critical role in...
Show moreDigital human brain atlases consisting of MRI-based templates and semantic labels delineating different brain regions serve a critical role in neuroimaging, mainly facilitating spatial normalization and automated segmentation for the purposes of voxel-wise, region-of-interest, and network analyses. Diffusion MRI templates contain rich information about the microstructure of the brain, however the accuracy of templates constructed based on the diffusion tensor imaging (DTI) model is limited in regions with complex neuronal microarchitecture. High angular resolution diffusion imaging (HARDI) overcomes limitations of the DTI model and is capable of resolving intravoxel heterogeneity. In this work a method to develop artifact-free HARDI template of the human brain from low angular resolution data is presented. Existing white matter (WM) atlases have been generated either based on anatomical landmarks, thus mixing tracts with substantially different roles, or using DTI tractography, which fails in regions with crossing fibers. Connectivity-based atlases developed using HARDI templates and probabilistic tractography have potential to identify functionally distinct subregions of the brain. This work presents connectivity-based atlas of human brain WM created using HARDI template in ICBM-152 space and a set of FreeSurfer grey matter labels.
Ph.D. in Physics, May 2016
Show less

Title: Screech Tones of Supersonic Jets from Bevelled Rectangular Nozzles
Creator: Tam, Ckw, Shen, H., Raman, G.
Date: 1997-07
Publisher: American Inst Aeronaut Astronaut
Description: It is known experimentally that an imperfectly expanded rectangular jet from a thin-lip convergent nozzle emits only a single dominant screech...
Show moreIt is known experimentally that an imperfectly expanded rectangular jet from a thin-lip convergent nozzle emits only a single dominant screech tone. The frequency of the screech tone decreases continuously with an increase in jet Mach number. However, for a supersonic jet issued from a bevelled nozzle or a convergent-divergent nozzle with straight side walls, the shock cell structure and the screech frequency pattern are fairly complicated and have not been predicted before. It is shown that the shock cell structures of these jets can be decomposed into waveguide modes of the jet flow. The screech frequencies are related to the higher-order waveguide modes following the weakest link screech tone theory. The measured screech frequencies are found to compare web with the predicted screech frequency curves.
Show less

Title: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry (sequence unknown), IPRO 333 - Deliverables: IPRO 333 Midterm Presentation F09
Creator: Bonesz, Andrew, Clark, Howard, Douglas, Carlie, Gajdorus, Michael, Gottschall, Keenan, Hendricks, Rachel, Kimball, Clayton, Linares, Jared, Marks, Paul, Mellom, James, Oblenida, Cindy, Pop, Sabina, Stelcel, Carl, Young, Jeremy, Zhou, Raymond
Date: 2009-12
Description: The primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the...
Show moreThe primary objective of IPRO 333 is to partner the knowledge and ideas of young engineers, architects, and scientists at IIT with the resources of the Museum of Science and Industry (MSI) in Chicago. This partnership endeavors to help the museum's Fabrication Laboratory (Fab Lab) maximize its potential as a resource for museum guests, young and old, as well as for IIT students, staff, and faculty.
Sponsorship: Museum of Science and Industry. Steven Willis- Director, Fabrication Lab
Deliverables for IPRO 333: Fab Lab: Creating Design-to-Prototype Learning Modules at the Museum of Science and Industry for the fall 2009 semester
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of