Search results

Title: TEMPERATURE PROFILES THROUGH THE SHELL IN EGGS HEATED BY INFRARED ENERGY
Creator: Guo, Jingxin
Date: 2012-07-30, 2012-07
Description: Infrared heating is an effective method for surface pasteurization of shell eggs. As the external temperature reaches the inactivation...
Show moreInfrared heating is an effective method for surface pasteurization of shell eggs. As the external temperature reaches the inactivation temperature, internal temperatures could become great enough to denature albumen. However, the internal temperature of albumen at the shell cannot be measured directly. The purpose of this study is to use experimental data to understand the response of the albumen temperature at the shell to infrared radiation impinging at its outer surface. Fresh eggs were obtained from a local producer and refrigerated until needed. They were prepared for each experiment by overnight equilibration with ambient conditions. Each egg was placed on a metal stage over which an infrared lamp was positioned. The stage allowed a K-type thermocouple to be inserted through a small hole in the shell opposite of the shell area facing the lamp. The thermocouple was pushed into the egg such that the tip was against the inner surface of the shell just underneath the exposed area. The external temperature of this area was measured by an infrared pyrometer. Variables for these experiments were temperature of the IR lamp (277°C, 329°C, 391°C and 452°C), distance between shell egg and IR lamp (3.13 cm – 15.83 cm), and treatment time. All experiments share the same initial lag around 30s, suggested that the initial lag did not vary with changing of lamp-egg distances and lamp temperatures. After the initial lag, internal and external temperatures were found to increase at the same rate regardless of experimental parameters, indicating and equilibrium between the infrared energy impinging on the surface and its dissipation in the interior of the egg. The difference of temperature distributes between 10°C to 20°C. However, lowering lamp temperatures or increasing distances did not change this difference significantly. Moreover, the temperature gap sustains the same temperature after initial lag. The results showed that the internal temperature could be inferred via measuring external temperature. This is valuable in processing to maximize external surface temperature while protecting heat sensitive albumen. Future work will involve modeling the heating phenomenon to determine if knowing only the lamp temperature and distance is sufficient for predicting internal temperature.
M.S. in Food Processing Engineering, July 2012
Show less

Title: SURVIVAL OF SALMONELLA ON CHAMOMILE, PEPPERMINT AND GREEN TEA DURING STORAGE RELATED TO TEMPERATURE AND HUMIDITY
Creator: Chen, Zhengzai
Date: 2013-04-24, 2013-05
Description: Botanical/herbal teas may contain antimicrobial compounds that will affect the survival and persistence of the native as well as contaminant...
Show moreBotanical/herbal teas may contain antimicrobial compounds that will affect the survival and persistence of the native as well as contaminant microflora. Although Salmonella are known for their ability to survive in low water activity environments, their survival on dry botanical/herbal teas has not been examined. The purpose of this work is to determine the survival of Salmonella on three types of teas, chamomile peppermint, and green tea under different storage conditions. In addition, the ability of Salmonella to grow in tea brewed with contaminated product was examined. A cocktail of four Salmonella serovars was inoculated onto 1 g samples of chamomile, peppermint, and green tea to give a starting cell population of approximately 10 log cfu/g. The inoculum was allowed to dry prior to storage at 25 °C and 35 °C and at low (<30% RH) and high (> 90% RH) humidity levels. At different time intervals up to 6 months, triplicate samples at each condition were evaluated for surviving Salmonella populations. In addition, samples were used to produce a low-temperature (sun) brewed tea and inoculated. Growth was assessed after 24 hr. Under the four storage conditions tested, survival followed the order 25°C/low RH > 35°C/low RH > 25°C/high RH > 35°C/high RH. Salmonella losses at 25°C/low RH occurred primarily during drying, after which populations showed little declines over 6 months. In contrast Salmonella decreased below detection after 45 days at 35°C and high RH in all teas tested. All teas tested supported the growth of Salmonella after brewing. Storage conditions significantly impact the survival of Salmonella in dried herbal teas. If Salmonella survives after storage, it may also survive and grow after a home brewing process.
M.S. in Food Safety and Technology, May 2013
Show less

Title: IN VITRO STUDIES OF VIRULENCE SUPPRESSION ON P. AERUGINOSA BY PHOSPHATE / POLYPHOSPHATE-LOADED NANOPARTICLES
Creator: Yin, Yushu
Date: 2015, 2015-07
Description: Critically ill patients harbor multi-drug resistant pathogens that can activate their virulence in the response to low nutrient conditions and...
Show moreCritically ill patients harbor multi-drug resistant pathogens that can activate their virulence in the response to low nutrient conditions and host stress derived factors. It was recently shown that the oversupply of inorganic phosphate to bacterial environment can profoundly suppress the virulence of pathogens. Here we hypothesized that phosphateand/ or polyphosphate-loaded nanoparticles can present a tool to deliver and slowly release phosphate in pathogen-rich niche, thereby suppressing bacterial virulence. In this work, a designed study on effect of different phosphate levels (including the phosphate released from hydrogel nanoparticles) on virulence of P. aeruginosa is addressed. In this work, we developed formulations for preparing hexametaphosphate-loaded nanoparticles on the basis of that for phosphate loaded nanoparticles. We utilized inverse miniemulsion polymerization in the synthesis of these nanoparticles. Polyethylene glycol diacrylate (PEGDA, moleculat weight of 575 Da) and N-vinyl pyrrolidone (molecular weight: 111.14 Da ) were chosen to be the initial monomers because the main crosslinker, polyethylene glycol is a kind of biocompatible material that has been approved by the U.S. Food and Drug Administration (FDA). Several parameter could be adjusted among the experiment. We selected the monomer mole fraction of PEGDA-575 as our parameter. After the synthesis, a nanoparticle size distribution between 110 nm and 150 nm was obtained. And these nanoparticles were proved to be able to release phosphate and hexametaphosphate as drug molecules. Although there were release bursts in the test of release kinetics, the crosslink density could be adjusted in following researches. The second part of this study is to test the virulence suppression effect of the nanoparticles in in vitro experiment on a kind of opportunistic pathogen, P. aeruginosa. This kind of gram-negative bacteria is one of the common intestinal microbial communities. We presented the strategy of suppressing virulence while containing rather than killing the bacteria. As a result, polyphosphate loaded nanoparticles showed to be the most effective one among several experiment groups. This result gave this study a promising future in further research in several aspects, such as in vivo test in biomedical and biomedical engineering.
M.S. in Chemical Engineering, July 2015
Show less

Title: The yield of acetic acid as influenced by temperature in wood distillation
Creator: Marx, Walter L.
Date: 2009, 1913
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/yieldofaceticaci00marx
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaf 22

Title: Track Elevation
Creator: Badger, Le Roy, Walbridge, John T.
Date: 2009, 1907
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/trackelevation00badg
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaves 34-36

Title: Zinc nitride, its formation, properties and alloys
Creator: Savoye, W. J., Edwards, A. R.
Date: 2009, 1921
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/zincnitrideitsfo00savo
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaves 25-28

Title: DETECTION OF SUPEROXIDE ANION RADICALS IN ANION EXCHANGE MEMBRANE FUEL CELLS USING IN-SITU FLUORESCENCE SPECTROSCOPY
Creator: Zhang, Yunzhu
Date: 2016, 2016-07
Description: Anion exchange membrane (AEM) stability is a long-standing challenge that has limited the widespread development and adoption of AEM fuel...
Show moreAnion exchange membrane (AEM) stability is a long-standing challenge that has limited the widespread development and adoption of AEM fuel cells. It is essential to understand the mechanism of AEM degradation during fuel cell operation. There are multiple modes of AEM degradation, broadly classified as chemical, mechanical and thermal degradation. Chemical degradation is among the most destructive modes, and can be further sub-divided into nucleophilic degradation (induced by the hydroxide ion), and oxidative degradation (induced by reactive oxygen species). While the former has been extensively studied, there is minimal work on oxidative AEM degradation. The reactive oxygen chemical species produced during the operation of an AEM fuel cell have hitherto not been detected during operation. Given the high pH, it is postulated that superoxide anion radicals (𝑂2∙−), as opposed to hydroxyl radicals, are primarily involved in the degradation progress. The objective of this study was to confirm the 𝑂2∙− formation during AEM fuel cell operation and to monitor in real-time the rate of 𝑂2∙− generation in an operating fuel cell using in-situ fluorescence spectroscopy. 1,3-diphenlisobenzofuran (DPBF) was chosen as the fluorescence probe, the sensitivity of which towards 𝑂2∙− was evaluated by performing ex-situ experiments in a semi-batch reactor. We demonstrate that the fluorescence intensity of this dye selectively decreased upon exposing 𝑂2∙−. DPBF was then incorporated into an AEM (membrane was solution cast after mixing the dye with the casting solution), which was assembled into a fuel cell. 𝑂2∙− generation in an operating AEM fuel cell was then monitored via in-situ fluorescence spectroscopy using a bifurcated optical probe, when the cell was operated in H2/O2 mode. To confirm the impact of 𝑂2∙− on AEM degradation, independent experiments (without dye) were performed under identical conditions, under both H2/O2 and N2/N2 modes, and the ionic conductivity and ion exchange capacity were monitored to estimate degradation extent. From our in-situ fluorescence studies, we were able to estimate the rate constants and activation energy for oxidative AEM degradation in an operating AEM fuel cell.
M.S. in Chemical Engineering, July 2016
Show less

Title: Study of the production of resorcin
Creator: Cable, D. E., Prest, J. I.
Date: 2009, 1918
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofproductio00cabl
Thesis (B.S.)--Armour Institute of Technology

Title: The utilization of sunflower stalks in paper manufacture
Creator: Zavertnik, J.
Date: 2009, 1914
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/utilizationofsun00zave
Thesis (B.S.)--Armour Institute of Technology

Title: SUSTAINABLE NEW CITY MENTOUGOU, CHINA
Creator: Yin, Lu
Date: 2013-04-30, 2013-05
Description: This thesis will demonstrate one of the first urban models for the future of China’s growth. The Urban Operating System and GPS make the smart...
Show moreThis thesis will demonstrate one of the first urban models for the future of China’s growth. The Urban Operating System and GPS make the smart city smarter by linking up networks of billions of distributed sensors, systems, and intelligence across urban environments via city-scale operating systems. Personal Rapid Transit system runs everywhere and it is accessed and ordered by smart phone. Green belt is the medium that links all the natural area and parks in the city which become the core element in the city because it plays the most important role. Two types of transportation system including the Meglev for 10 minute access to Beijing and the PRT system for all internal urban mobility. The population of the new city is 80000. 80% of the people live here and work here, 20% of the people live here but work in Beijing. 30% of the people will use PRT system everyday. All the city blocks are mixed-use blocks. There are several types of residential buildings including mid-rise, high-rise and Beijing traditional courtyard house. This sustainable new city provides quality of lift to all the people live in the city.
M.S. in Architecture, May 2013
Show less

Title: STRUCTURAL CHARACTERIZATION OF THE FLIGHT MUSCLE OF MANDUCA SEXTA
Creator: Cheng, Yu-shu
Date: 2013-04-22, 2013-05
Description: There are several properties of the flight muscle Manduca sexta that are interesting. In its physiological characteristics, like mammalian...
Show moreThere are several properties of the flight muscle Manduca sexta that are interesting. In its physiological characteristics, like mammalian skeletal and cardiac striated muscle, it is a synchronous muscle. However, it is much more similar structurally to the more widely known asynchronous insect flight muscles of Drosophila and Lethocerus. The goal of the thesis is to study the structural characteristics and perform mechanical studies of dorsal and ventral muscle of Manduca flight muscle. In pursuit of this goal, a secondary purpose was to develop better storage conditions for skinned insect muscle which can maintain muscle structure and function. Maximum active force as a function of time in storage was compared for storing at 4℃ without glycerol and storing at -80℃ with 75% glycerol. The maximum force values were almost the same during days 0-4. However, the muscle stored at -80℃ with 75% glycerol gave higher active force in high calcium (pCa 4.5) solution over a longer time in storage than muscle stored at 4℃. Both ventral and dorsal muscles can deliver 40-50% of original active force for up to 21 days in storage. X-ray diffraction experiments were done to compare the response of chemically skinned Manduca flight muscle to temperature and to the induction of rigor. The lattice spacing (d10) decreased and intensity ratio I20/I10 increased when the temperature of the relaxing solution bathing the solution increased from 10℃ to 40℃. Lattice spacing (d10) decreased, but the I20/I10 intensity ratio increased slightly while concentration of dextran increased from 1% to 6%. Six percent dextran was insufficient to restore the in vivo lattice spacing.
M.S. in Molecular Biochemistry and Biophysics, May 2013
Show less

Title: The titration of iron by potassium permanganate
Creator: Finkelstein, Leo
Date: 2009, 1914
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/titrationofironb00fink
Thesis (B.S.)--Armour Institute of Technology

Title: MODELING OF A DCFC ANODE IN CONNECTION WITH THE EXPERIMENTAL RESEARCH ON THE WETTING BEHAVIOR OF A GRAPHIC ROD IN MOLTEN CARBONATE
Creator: Li, Yue
Date: 2013, 2013-12
Description: Not available
M.S. in Civil Engineering, July 2013

Title: The synthetic manufacture of phenol
Creator: Parrot, Raymond D.
Date: 2009, 1919
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/syntheticmanufac00parr
Thesis (B.S.)--Armour Institute of Technology

Title: A study of a suction gas producer
Creator: Hoffman, Balthasar
Date: 2009, 1907
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofsuctionga00hoff
Thesis (B.S.)--Armour Institute of Technology

Title: A study of the corrosion of locomotive boiler tubes
Creator: Congdon, Charles C.
Date: 2009, 1915
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofcorrosion00cong
Thesis (B.S.)--Armour Institute of Technology; Bibliography: leaves 36-37

Title: INVESTIGATION OF THE EFFICACY OF REACTIVE OXYGEN SPECIES GENERATED BY BOVINE AORTIC ENDOTHELIAL CELLS FOR INITIATING FREE-RADICAL POLYMERIZATION
Creator: Lu, Chenlin
Date: 2013, 2013-12
Description: Reactive oxygen species are reported to be generated by bovine aortic endothelial cells during ischemia followed by reperfusion. This...
Show moreReactive oxygen species are reported to be generated by bovine aortic endothelial cells during ischemia followed by reperfusion. This biological response, believed to be the cause of post-ischemic reperfusion injury, inspired us to investigate the possibility of coupling it with the initiation of free-radical polymerization to produce polymer hydrogels for cell encapsulation. In this work, the generation of reactive oxygen species during ischemia and reperfusion was examined by fluorescence detection and the feasibility of initiating free-radical polymerization by generated reactive oxygen species was investigated in two sets of experiments. The generation of reactive oxygen species by bovine aortic endothelial cells when subjected to anoxia followed by reoxygenation was investigated in both attached and suspended cells. Both intracellular and extracellular generations of ROS appeared to occur in the experiments of attached cells. Cell viability experiments demonstrated that the generation of ROS was sufficient to cause cell damage and death. The feasibility of initiating free-radical polymerization by reactive oxygen species generated by bovine aortic endothelial cells subjected to anoxia followed by reoxygenation was investigated in two sets of experiments. One set involved the linear polymerization of NVP which allowed us to quantify the extent of polymerization and characterization of the weight conversion of PVP polymer. The other set involved the formation of PEGDA hydrogels which were characterized by imaging and staining methods. To our knowledge this is the first evidence of cell induced polymerization initiated by reactive oxygen species and gelation which can be used for a variety of biomedical applications.
M.S. in Chemical and Biological Engineering, December 2013
Show less

Title: A study of the "cracking" of petroleum
Creator: Heritage, Clark Cable, Hook, Frank William.
Date: 2009, 1914
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofcrackingo00heri
Thesis (B.S.)--Armour Institute of Technology, 1914 B.S. in Chemical Engineering, 1914

Title: A study of the effect of temperature and pressure on the carbonation of water
Creator: Marx, Walter L
Date: 2009, 1916
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/studyofeffectoft00marx
Thesis (B.S.)--Armour Institute of Technology, 1916 Bibliography: leaf 40 B.S. in...
Show morehttp://www.archive.org/details/studyofeffectoft00marx
Thesis (B.S.)--Armour Institute of Technology, 1916 Bibliography: leaf 40 B.S. in Chemical Engineering, 1916
Show less

Title: EVALUATION OF COXIELLA BURNETII NINE MILE PHASE II INACTIVATION IN WHOLE MILK AFTER THERMAL TREATMENT BY INTEGRATED CELL CULTURE-PCR ASSAY
Creator: Ma, Songchuan
Date: 2013-04-30, 2013-05
Description: Coxiella burnetii, the etiologic agent of Q fever, is a Gram-negative, obligate intracellular coccobacillus, which has been used as the...
Show moreCoxiella burnetii, the etiologic agent of Q fever, is a Gram-negative, obligate intracellular coccobacillus, which has been used as the reference organism for defining milk pasteurization conditions. A developed Integrated Cell Culture-PCR (ICC-PCR) assay may be helpful for evaluating C. burnetii inactivation by thermal process in whole milk products. The purpose of this research was to characterize and optimize an ICCPCR assay in whole milk and evaluate this assay by thermal process. Coxiella burnetii was diluted into whole milk from FDA stock and treated by thermal process. Samples were sealed in glass vials and placed in ice-water to obtain a consistent starting temperature. Cooled vials were heated in a shaking waterbath at 60 °C, 62 °C and 64 °C in for various times. Thermally treated samples were diluted by RPMI+1% FBS and inoculated on Vero cell culture monolayers with PBS, incubated for 48 hours to infect the Vero cells, and then incubated for another 9 days to allow propagation. The propagated C. burnetii mix was subjected to freeze-thaw followed by DNA extraction with Autogen DNA Tissue Kit by using Quickgene Mini80. Extracted DNA was amplified by using TaqMan-MGB based qPCR targeting published primers for the IS1111a transposase gene to verify C. burnetii growth. For detection limit determination, serial dilutions of C. burnetii were mixed independently in whole milk and 1% FBS+RPMI. The mix was overlaid on confluent Vero cells for 2 days and 11 days. The DNA extractions were followed using DNA tissue kit by Quickgene Mini80 and PCR. At least duplicate trials using 3 replicates per trial were completed for each time/temperature condition.
M.S. in Food Safety and Technology, May 2013
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Date

Subject

Creator

Rights