Search results

Title: FEASIBILITY OF INDICATOR MICROORGANISMS IN ASSESSING THE EFFICACY OF SANITIZERS IN FRESH PRODUCE WASHING
Creator: Zhong, Zeyan
Date: 2016, 2016-05
Description: Sanitizers have been widely used in controlling cross-contamination during fresh produce washing processes. It is important to identify...
Show moreSanitizers have been widely used in controlling cross-contamination during fresh produce washing processes. It is important to identify different approaches for monitoring the efficacy of sanitizer washing. In this study, our objective was to determine the feasibility of indicator microorganisms in assessing the efficacy of chlorine and peroxyacetic acid (PAA) in fresh-cut produce washing. In inactivation experiments, the survivals of inoculated indicator microorganisms [total viable count (TVC), Enterobacteriaceae and total coliforms] and E. coli O157:H7 were determined after exposure to different concentrations of chlorine or PAA in water with added organic load (TOC~200 mg/l). In small-scale washing experiments, bacterial transfer from lettuce leaves inoculated with indicators or E. coli O157:H7 to wash water containing chlorine or PAA with/without organic matters was evaluated. In the inactivation study, higher log reduction was observed for Enterobacteriaceae and total coliforms than for E. coli O157:H7 after chlorine treatment at an initial concentration of 30 ppm. In the bacterial transfer study [a inoculated leaf (~5 log CFU) in 30 ml of wash water], without additional organic matter, approximately 3.5 log total CFU of all bacteria groups was transferred into wash water. Less than 1.5 log total CFU were detected for Enterobacteriaceae, total coliforms and E. coli O157:H7 in 1 ppm chlorine washing. With introduced organic matter, similar microbial loads of Enterobacteriaceae, total coliforms and E. coli O157:H7 were detected on washed leaves and in wash water with initial chlorine concentration of 1 ppm; when initial chlorine level increased to 10 ppm, less than 2 log total CFU of Enterobacteriaceae and total coliforms was detected while about 3 log total CFU of E. coli O157:H7 transferred to wash water, suggesting that chlorine at an initial concentration of 10 ppm could not prevent cross-contamination in the presence of organic load. The indicators showed different levels of survival and transfer from E. coli O157:H7 in this study and were unreliable to effectively monitor the behavior of the pathogen during chlorine wash in fresh produce processes. Enterobacteriaceae and total coliforms were more vulnerable to 40 ppm PAA treatment than E. coli O157:H7 in PAA inactivation experiments. No survival, except for TVC, was observed after 80 ppm of PAA inactivation. In the bacterial transfer study, 40 ppm PAA in wash water was found unable to prevent cross-contamination of indicators and E. coli O157:H7 from leaves to water. Further investigation is needed to compare the bacterial transfer levels of E. coli O157:H7 and the indicators at higher PAA levels.
M.S. in Food Safety and Technology, May 2016
Show less

Title: Nutrition and Diabetes: Pathophysiology and Management
Creator: Opara, Emmanuel C.
Date: 2006
Publisher: CRC, Taylor & Francis

Title: COOPERATIVE BATCH SCHEDULING FOR HPC SYSTEMS
Creator: Yang, Xu
Date: 2017, 2017-05
Description: The batch scheduler is an important system software serving as the interface between users and HPC systems. Users submit their jobs via batch...
Show moreThe batch scheduler is an important system software serving as the interface between users and HPC systems. Users submit their jobs via batch scheduling portal and the batch scheduler makes scheduling decision for each job based on its request for system resources and system availability. Jobs submitted to HPC systems are usually parallel applications and their lifecycle consists of multiple running phases, such as computation, communication and input/output data. Thus, the running of such parallel applications could involve various system resources, such as power, network bandwidth, I/O bandwidth, storage, etc. And most of these system resources are shared among concurrently running jobs. However, Today's batch schedulers do not take the contention and interference between jobs over these resources into consideration for making scheduling decisions, which has been identified as one of the major culprits for both the system and application performance variability. In this work, we propose a cooperative batch scheduling framework for HPC systems. The motivation of our work is to take important factors about jobs and the system, such as job power, job communication characteristics and network topology, for making orchestrated scheduling decisions to reduce the contention between concurrently running jobs and to alleviate the performance variability. Our contributions are the design and implementation of several coordinated scheduling models and algorithms for addressing some chronic issues in HPC systems. The proposed models and algorithms in this work have been evaluated by the means of simulation using workload traces and application communication traces collected from production HPC systems. Preliminary experimental results show that our models and algorithms can effectively improve the application and the system overall performance, HPC facilities' operation cost, and alleviate the performance variability caused by job interference.
Ph.D. in Computer Science, May 2017
Show less

Title: APPLICABILITY OF THE INTERVAL ANALYSIS METHOD TO RELIABILITY ASSESSMENT OF STRUCTURES
Creator: Taha, Raguez A.
Date: 2012-11-26, 2012-12
Description: The scope of this study is focused on the applicability of the interval method to the reliability analysis of structures. The study includes...
Show moreThe scope of this study is focused on the applicability of the interval method to the reliability analysis of structures. The study includes using the traditional probability methods in several applications and comparing the results with the interval analysis. Accordingly, the interval arithmetic rules are applied in several examples and the results are compared with those from the traditional probability theory concepts. Specifically, the procedure for using the interval methods was applied to the development of the probability of failure for a simple structural member; and for a link in a network system. Through three simple examples, the research shows that the interval method offers comparable results with those from the traditional first-order reliability method. The procedure based on the interval method, however, may offer advantages, especially in cases where the uncertainties in various parameters describing the reliability of a system are large. In the presence of large uncertainties, the traditional methods of reliability analysis, based on the first order approximation, may lose their accuracy. In these cases, the interval method may offer a simple method yet with more accurate results.
M.S. in Civil Engineering, December 2012
Show less

Title: STUDY OF VITREOSCILLA HEMOGLOBIN VARIANTS PRODUCED BY RANDOM MUTAGENESIS
Creator: Lin, Xiaodan
Date: 2015, 2015-05
Description: This study is focused on comparing the wild type and mutated versions of the Vitreoscilla hemoglobin gene (vgb). The purpose of this focus is...
Show moreThis study is focused on comparing the wild type and mutated versions of the Vitreoscilla hemoglobin gene (vgb). The purpose of this focus is to find out whether any of the vgb mutations provides an advantage regarding cell growth rate, as well as on the expression level of Vitreoscilla hemoglobin protein (VHb). A negative control Escherichia coli DH5α (E. coli DH5α) bearing no pUC plasmid, as well as seven E. coli DH5α strains bearing different pUC-based plasmids were tested in the experiments. Among these were one vector-only negative control (pUC18), one wild type positive control (pUC8:16, which carries wild type vgb) and five different types of pUC-bearing vgb mutants (pUC-vgb M1, M2, M3, M4 and pUC18-vgb M3). In order to compare cell growth rate among these strains, the growth rate assay was carried out under three different conditions: (1) Luria-Bertani (LB) medium, aerobic conditions; (2) Terrific Broth (TB) medium, low oxygen conditions; and (3) TB medium, microaerobic conditions. In addition, the carbon monoxide (CO) difference spectra assay was conducted to measure functioning VHb protein expression levels for the strains grown under aerobic conditions. In contrast to the results obtained by our Australian collaborators, our growth rate assay and CO difference spectra assay showed no growth advantage or higher expression level of functioning VHb protein due to any of the vgb mutations. For the further study of the vgb mutants, four different recombinant plasmids were constructed by cloning three types of mutated vgb (vgb M1, M3 and M4) as well as wild type vgb into the prokaryotic expression vector pUC8 with ampicillin (Amp) resistance. After being transformed into competent E. coli DH5α cell, these resulting xii strains, as well as the plasmid-free negative control (E. coli DH5α) and vector-only negative control (E. coli DH5α bearing plasmid pUC8) were tested by the CO difference spectra assay. Except strain E. coli DH5α [pUC8-vgb M3], which showed a slight increase in the VHb expression level, the strain bearing other mutated vgbs did not demonstrate any elevation in VHb protein expression level, compared to the positive control containing wild type vgb.
M.S. in Biology, May 2015
Show less

Title: Design of Kranti Home and School (Mumbai) for Sexually Trafficked Girls (sequence unknown), IPRO 343 - Project Plan
Creator: Arastu, Insiyah, Choe, Jonathan, Davis, Elena, Enriquez, Sheena, Kimball, Mark, Kleehammer, Christopher, Klimek, Joseph, Marcheva, Boryana, Martin, Amy, Patel, Hamida, Patel, Avni, Semerdjiev, Ivo, Sturrup, Terez
Date: 2009-12
Description: To develop and design a home and center of education for girls who have been previously trafficked.
Project Plan for IPRO 343: Design of Kranti...
Show moreTo develop and design a home and center of education for girls who have been previously trafficked.
Project Plan for IPRO 343: Design of Kranti Home and School (Mumbai) for Sexually Trafficked Girls for the fall 2009 semester
Show less

Title: FUNCTIONAL ANALYSIS OF POTENTIAL PHOSPHORYLATION SITES IN BAXΔ2 UNIQUE OLIGOPEPTIDE
Creator: Tsai, Yu-tseng
Date: 2014, 2014-07
Description: The tumor suppressor gene, Bax, plays a critical role in tumor progression through regulating cell apoptosis. Mutations on the BAX gene often...
Show moreThe tumor suppressor gene, Bax, plays a critical role in tumor progression through regulating cell apoptosis. Mutations on the BAX gene often result in silencing its expression and the loss of pro-death ability. However, there is a unique Bax isoform, BaxΔ2, recently discovered in these Bax mutated cancer cells. BaxΔ2 isoform shows higher pro-apoptotic activity than Baxα. Unlike the parental Baxα, BaxΔ2 does not target mitochondria and forms aggregates in cytosol. There is a unique 10-amino-acid peptide in the N-terminus of BaxΔ2 protein possible function as a special signal. Two serines in this region are predicted as potential phosphorylation sites for regulation of the protein activity. To test this hypothesis, we mutated both serines (SS) into non-phosphorylatable alanines (AA) by site-directed mutagenesis approach. Both BaxΔ2 wild type (BaxΔ2-SS) and mutants (BaxΔ2-AA) were tagged with GFP, which allows us to monitor the protein expression and cellular localization in live cells. Here, we found that the distribution patterns of BaxΔ2-AA and BaxΔ2-SS were similar and appeared as aggregates in cytosol. BaxΔ2-AA mutant also possessed the similar pro-apoptotic activity with BaxΔ2-SS wild type. These results suggested that the two serines in BaxΔ2 unique oligopeptide might not play a critical role in BaxΔ2 localization and pro-death activity under the current ectopic expression conditions. Further study is needed to have better understanding of phosphorylation in contribution to unique behavior of BaxΔ2.
M.S. in Biology, July 2014
Show less

Title: The utilization of sunflower stalks in paper manufacture
Creator: Zavertnik, J.
Date: 2009, 1914
Publisher: Armour Institute of Technology
Description: http://www.archive.org/details/utilizationofsun00zave
Thesis (B.S.)--Armour Institute of Technology

Title: POINT CLOUD FUSION BETWEEEN AERIAL AND VEHICLE LIDAR
Creator: Guangyao, Ma
Date: 2015, 2015-05
Description: Because of the increasing requirement of precision in region of 3-D map, we began to use LiDAR to establish a more accurate map. There still...
Show moreBecause of the increasing requirement of precision in region of 3-D map, we began to use LiDAR to establish a more accurate map. There still exist some problems although we have already made a great progress in this area. One of them, which I tried to process during my thesis study, is that we have two points source - Aerial LiDAR Data( Points gotten by Airplane ) and Vehicle LiDAR Data( Points gotten by Vehicle ) - while both of them have a different density and cannot be merged well. This process - Fusion-is kindly similar to registration, the difference is that the points we would like to merge are generated from different devices and have only few points pairs in the same region. For example, the Aerial LiDAR data has a higher points density in the roofs and ground, but lower in the walls. In the meanwhile, the Vehicle LiDAR data has a lot of points in the walls and ground region. It is beneficial to minimize the difference between these two point sets since the process is necessary for modeling, registration and so on. Therefore, my thesis is to minimize the difference between these two data sources, a procedure of Fusion. The main idea is to read the LiDAR data into data structure of Point Cloud, sample their density to the similar level, and select several corresponding special region pairs( we named these regions -chunks, e.g. Median strip and boundaries of road ) with sufficient interesting points to do fusion. Interesting points indicate the points with one and more special features among all points. And, the algorithm we used to implement the fusion is ICP( Iterative Closet Point Algorithm). Not similar to Registration of Point Cloud, research in the Fusion area is rare. Therefore, the existing algorithms are not well suitable in this project. I deduce some new algorithms during my research since the original ICP Algorithm cannot work well. Both Update Equation and Objective Function are modified. In this thesis, PCL( Point Cloud Library ) is mainly used to implement the basic function, such as nding the nearest points and sampling point cloud, and Eigen library to write the core functions( e.g. Modified Iterative Closest Point Alg ). I also use libLAS library to implement the IO operations and MeshLab to visualize the point cloud after modification.
M.S. in Computer Science, May 2015
Show less

Title: SPEECH INTELLIGIBILITY AND ACCENTS IN SPEECH-MEDIATED INTERFACES: RESULTS AND RECOMMENDATIONS
Creator: Lawrence, Halcyon M.
Date: 2013, 2013-07
Description: There continues to be significant growth in the development and use of speech–mediated devices and technology products; however, there is no...
Show moreThere continues to be significant growth in the development and use of speech–mediated devices and technology products; however, there is no evidence that non-native English speech is used in these devices, despite the fact that English is now spoken by more non-native speakers than native speakers, worldwide. This relative absence of non-native English speech in devices may be due in part to the costs associated with localizing speech devices, but it may also be attributable to the fact that not enough is known about user performance with accented speech in speech–mediated environments. In the absence of targeted research, developers may be relying on existing studies which focus on perception (impression) of accented speech, as a basis of decision-making. However, perception paints only part of the picture when it comes to understanding how and why people perform in certain ways and in certain environments. Three studies were conducted to answer the following questions: (1) What are the acoustic-phonetic characteristics of negatively- and positively-perceived accented speech? And how are these characteristics related to markers of intelligible speech? (2) How do participants perform on different types of accented-speech tasks? (3) What is the relationship between user perception of accented speech and user performance in response to accented speech? and; (4) How do participants perform on accented speech tasks of varying complexity? Arising out of this research, there are six recommendations for the use of accented speech in speech-mediated devices. Also, the findings of this study raise questions about inherent linguistic stereotypes which impact both our perceptions and our choices about xvi the accents we want to hear on our speech devices. A discussion about if and how these stereotypes can be altered and measured are included. Future research should examine the role of experienced non-native talkers in speech devices. Results of study one demonstrated that some experienced non-native talkers were positively-perceived by raters and may be good candidates for talkers in speech devices. A study like this would explicitly establish if listeners consistently make native vs. non-native distinctions in their preferences or if a prestige continuum emerges.
PH.D in Technical Communication, July 2013
Show less

Title: Learning the Lingo? Gender, Prestige and Linguistic Adaptation in Review Communities
Creator: Hemphill, Libby, Otterbacher, Jahna
Date: 2011-11-19, 2012-02
Publisher: ACM Press
Description: Women and men communicate differently in both face-to- face and computer-mediated environments. We study linguistic patterns considered...
Show moreWomen and men communicate differently in both face-to- face and computer-mediated environments. We study linguistic patterns considered gendered in reviews contributed to the Internet Movie Database. IMDb has been described as a male-majority community, in which females contribute fewer reviews and enjoy less prestige than males. Analyzing reviews posted by prolific males and females, we hypothesize that females adjust their communication styles to be in sync with their male counterparts. We find evidence that while certain characteristics of “female language” persevere over time (e.g., frequent use of pronouns) others (e.g., hedging) decrease with time. Surprisingly, we also find that males often increase their use of “female” features. Our results indicate, that even when they resemble men’s reviews linguistically, women’s reviews still enjoy less prestige and smaller audiences.
Show less

Title: INVESTIGATION OF NOROVIRUS CROSS CONTAMINATION DURING FOOD SERVICE PROCEDURES USED IN PREPARATION OF FRESH PRODUCE
Creator: Suriyanarayanan, Annamalai
Date: 2011-11, 2011-12
Description: Human norovirus (HuNoV) is considered an important cause of foodborne outbreaks, often attributed to the preparation of fresh produce by...
Show moreHuman norovirus (HuNoV) is considered an important cause of foodborne outbreaks, often attributed to the preparation of fresh produce by infected food handlers. In this investigation, methods for recovery of murine norovirus (MNV-1), a surrogate for HuNoV, from food preparatory surfaces were optimized, and MNV-1 crosscontamination between various surfaces common in a food service setting were studied. Fifty microliters of MNV-1 was inoculated onto demarcated 1 x 1 inch squares of polypropylene cutting board, stainless steel knife and spigots. After drying, MNV-1 was recovered from each surface using either a cotton swab, composite tissue or sterile sponge in combination with different eluents such as tissue culture growth medium, 3% beef extract, glycine buffer (50mM glycine, 1% beef extract), stripping solution (0.04% K2HPO4, 1.01% Na2HPO4, 0.1% Triton X-100), and Earle’s Balanced Salt Solution (EBSS). The eluent/recovery tool combinations that recovered the highest percentage of MNV-1 from cutting board were stripping solution/sponge (20%) and growth medium/swab (20%). The greatest recovery from the knife blade was achieved with the growth medium/composite tissue combination (43%), while recovery from spigots was greatest using the stripping solution/sponge (28%) and the growth medium/sponge combinations (27%). In the second phase of this investigation, human volunteers were asked to perform various tasks in order to quantify the amount of MNV-1 cross contamination between various surfaces, including bare hands, fresh-cut lettuce, and spigots. The percentage of MNV-1 transfer from hands to spigots varied from 0.06% to 3.59%, spigots to hands varied from 10% to 90.4% and lettuce to hands varied from 0.30% to 4.33%. x The results of this investigation can be used in developing a model describing the transfer pattern of HuNoV between surfaces common in retail food service, and used in developing educational materials for food service workers.
M.S. in Science, Food Safety, and Technology, December 2011
Show less

Title: Bucktown Artist's Live/Work Cooperative
Creator: Collier, T Scott
Date: 2011-05, 2011-05
Description: By creating affordable live-work environments and a cooperative production facility the project will reestablish the Bucktown neighborhood as...
Show moreBy creating affordable live-work environments and a cooperative production facility the project will reestablish the Bucktown neighborhood as a strong and viable artist community in the city of Chicago.
Show less

Title: PULSED LIGHT INACTIVATION OF MURINE NOROVIRUS ON VARIOUS FOOD CONTACT SURFACES
Creator: Zhou, Zijin
Date: 2015, 2015-07
Description: Norovirus is one of the leading causes for foodborne illness. Transmission of virus from surface to food has been known to cause a number of...
Show moreNorovirus is one of the leading causes for foodborne illness. Transmission of virus from surface to food has been known to cause a number of outbreaks. Studies of norovirus have been conducted using Murine Norovirus to simulate the behaviors. Pulsed light (PL) is a promising surface decontamination technology, which has the potential to be applied in a food service setting. PL uses intense pulses of short duration and a broad spectrum to accomplish microbial inactivation. This study evaluates the effect of PL on MNV-1, artificially inoculated onto various food contact surfaces including 304 stainless steel, glazed tile, polypropylene, and ultra-high molecular weight (UHMW) polyethylene. The virus was allowed to inoculate on the coupons for 20mins and treated with PL in a Xenon Steripulse XL-3000TM pulsed light treatment system for up to 60 s, at a distance of 8.3 cm 10.8 cm or 13.3cm from the central axis of the lamp. An infrared (IR) camera was used to record surface temperatures, in 1-s increments. After PL treatments, remaining viruses were recovered from surfaces and quantified by plaque assay. At a distance of 10.8cm, MNV-1 was reduced by 2.22-, 2.27- 2.75- and 3.12-log, after 20s treatment on inoculated stainless steel, glazed tile, UHMW polyethylene and polypropylene, respectively. After 50s treatment, MNV-1 was reduced by 4.86- and 5.93- log on glazed tile and stainless steel surface respectively. The surface temperature on tile and stainless steel increased at the rate of 1.08±0.20 and 1.28±0.32°C /s respectively. A relatively short treatment using pulsed light is sufficient to inactivate MNV-1 on the surface of materials commonly used in food preparation. The results suggest that the technology has the potential to reduce surface viral contamination in a food preparation setting.
M.S. in Food Safety and Technology, July 2015
Show less

Title: WIRELESS COMMUNICATION FOR AN ACTUATED GLOVE FOR HAND REHABILITATION
Creator: Yuan, Ning
Date: 2016, 2016-12
Description: Stroke survivors often experience long-term upper extremity impairment. This can greatly impair activities of daily living. The eXtension...
Show moreStroke survivors often experience long-term upper extremity impairment. This can greatly impair activities of daily living. The eXtension Glove (X-Glove) is a soft robotic device to aid hand therapy. It uses cables serving as external extensor tendons to assist digit extension and control digit flexion. Load cells are located on each motor to detect the force value of fingers. This paper provides a way to add a biofeedback function on the X-Glove and update the microprocessor to a PIC32MX795. So the X-Glove can establish a wireless communication transmit data with terminals, like PC. In order to display the biofeedback, a graphic user-interface is also developed so that therapists can optimize the therapy for each individual patient in real time.
M.S. in Biomedical Engineering, December 2016
Show less

Title: Agent-based control of spatially distributed chemical reactor networks
Creator: Tatara, Eric, North, Michael, Hood, Cindy, Teymour, Fouad, Cinar, Ali
Date: 2005
Publisher: SPRINGER-VERLAG BERLIN
Description: Large-scale spatially distributed systems provide a unique and difficult control challenge because of their nonlinearity, spatialdistribution...
Show moreLarge-scale spatially distributed systems provide a unique and difficult control challenge because of their nonlinearity, spatialdistribution and generally high order. The control structure for these systems tend to be both discrete and distributed as well and contain discrete and continuous elements. A layered control structure interfaced with complex arrays of sensors and actuators provides a flexible supervision and control system that can deal with local and global challenges. An adaptive agent-based control structure is presented whereby local control objectives may be changed in order to achieve the global control objective. Information is shared through a global knowledge environment that promotes the distribution of ideas through reinforcement. The performance of the agent-based control approach is illustrated in a case study where the interaction front between two competing autocatalytic species is moved from one spatial configuration to another. The multi-agent control system is able to effectively explore the parameter space of the network and intelligently manipulate the network flow rates such that the desired spatial distribution of species is achieved.
Endnote format citation
Show less

Title: STUDY OF SALMONELLA SURVIVAL ON THE SURFACE OF FRUITS
Creator: Sui, Ke
Date: 2017, 2017-05
Description: Salmonella enterica has been frequently linked to the major foodborne disease outbreaks. The molecular mechanisms underlying this pathogen...
Show moreSalmonella enterica has been frequently linked to the major foodborne disease outbreaks. The molecular mechanisms underlying this pathogen survival on the fresh fruit surface remain largely unexplored. In this study, the environmental factors that affect the survival of Salmonella strains on the surface of selected fruits were studied. Grape tomatoes (or cantaloupe peels) were inoculated in three separate trials with 1 mL Salmonella enterica serotypes Enteritidis or Typhimurium (approximately 1010-11 CFU/mL). Storage of grape tomatoes at 4 ℃ resulted in significant decrease in populations of S. Enteritidis; this trend was observed at both of the tested relative humidity with the D-value as 7.25±1.05 d and 7.28±2.34 d, respectively. At different temperatures, relative humidity only had marginal effects on the bacterial survival on the surface of grape tomato and cantaloupe. In addition, S. Typhimurium apparently survived better than S. Enteritidis on the surface of grape tomato. Furthermore, a transposonmutagenesis library with random transposon insertion mutants of S. Enteritidis and high-throughput sequencing analysis showed that the expression of genes rcsB and nlpD were hypothesized to be associated with the survival of S. Enteritidis on grape tomatoes. Inframe deletions of the two genes in S. Enteritidis were constructed by lambda red recombinase system and respective complementation mutants were also obtained for identification of the contribution of the two genes to the bacterial survival on the surface of grape tomato. Thus, this study provided microbiological and molecular microbiological basis to probe the roles of putative genes in Salmonella enterica survival on the surface of fresh fruits.
M.S. in Food Safety and Technology, May 2017
Show less

Title: Devices that Assist Blind & Visually-Impaired Individuals in Swimming and Other Exercise Activities (sequence unknown), IPRO 310 - Deliverables: IPRO 310 Poster F09
Creator: Dykeman, Kimberly, Healton, Michaela, Lipman, Timothy, Ludwig, Ross, Park, Jay, Reilly, Jeffrey, Sarkar, Smita, Sirk, Phillip, Toro, Branden
Date: 2009-12
Description: The objective is to develop, test, and implement assistive technology with the community that promotes safety and improves independence of...
Show moreThe objective is to develop, test, and implement assistive technology with the community that promotes safety and improves independence of blind and visually impaired (BVI) swimmers.
Sponsorship: Chicago Lighthouse for the Blind & Visually-Impaired. Notre Dame University
Deliverables for IPRO 310:Devices that Assist Blind & Visually-Impaired Individuals in Swimming and Other Exercise Activities for the fall 2009 semester.
Show less

Title: Teacher Knowledge Share (Semester Unknown) IPRO 320: Teacher Knowledge Share IPRO 320 Final Presentation F08
Creator: Bern, David, Bochantin, Marike, Hartline, Julian, Mccall, Ian, Mick, Emily, Peake, Andrew, Pierce, Alison, Pindrik, Dmitriy, Quinn, Michael, Stanford, Carly, Tilatti, Michael
Date: 2008, 2008-12
Description: The goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow...
Show moreThe goal of IPRO 320 is to create an online professional network for school teachers at the kindergarten through twelfth grade level to allow for the sharing of ideas, lesson plans and other professionally relevant information. This is a continuing project which saw limited success in the previous semester in that a functioning web site was constructed based on surveys of public school teachers but it saw very little use. This semester, the planned approach is to build on the research generated last semester by performing additional market research with teachers. Following that, IPRO 320 will rework much of the previous web site by refining some of the features, adding additional ones as the research indicates and improving the website in general, both functionally and aesthetically.
Deliverables
Show less

Title: LENGTH DEPENDENT ACTIVATION IN MANDUCA SEXTA FLIGHT MUSCLE
Creator: Kumar, Mohit
Date: 2011-08-09, 2011-07
Description: The flight muscle of Manduca sexta has some interesting properties. It is synchronous, like mammalian skeletal and cardiac striated muscle,...
Show moreThe flight muscle of Manduca sexta has some interesting properties. It is synchronous, like mammalian skeletal and cardiac striated muscle, but it is structurally similar to the more widely studied asynchronous insect flight muscles of Drosophila and Lethocerus. One of the main goals of the thesis is to generate a useful skinned preparation for mechanical studies in vitro. A number of different skinning protocols were tried and evaluated for preservation of structural integrity by using light and X-ray diffraction. In all muscles studied to date, isometric force is a function of the [Ca2+] of the bathing solution and also a function of the sarcomere length whereby more force is generated at a longer sarcomere length than at a shorter for the same [Ca2+]. This phenomenon is termed “length dependent activation” (LDA). To date no real studies on the force-pCa relationship has been done on Manduca sexta flight muscle. This force-pCa analysis would give us some insight into the length dependent activation (LDA) in this novel insect flight muscle system. The present studies were undertaken to characterize and analyze the force-pCa relationships in Manduca sexta. Conditions were found that allowed skinning muscles while maintaining good structural order. We found that both DLMs dorsal and ventral show length-dependent activation at longer SL. Our study also shows that ventral muscles are more cooperative than the dorsal muscles which may be related to their different functions in vivo.
M.S. in Biological, Chemical, and Physical Sciences, July 2011
Show less

repository.iit

Search the repository

Pages

Pages

Enabled Filters

Refine Results

Type

Date

Academic status of creator

Department

Subject

Creator

Part of