Search results

Title: Screech Tones from Rectangular Jets with Spanwise Oblique Shock-cell Structures
Creator: Raman, G.
Date: 1997-01-10
Publisher: Cambridge Univ Press
Description: Understanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft...
Show moreUnderstanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft structures. Although the connection between shock-cell spacing and screech frequency is well understood, the relation between non-uniformities in the shock-cell structures and the resulting amplitude, mode, and steadiness of screech have remained unexplored. This paper addresses the above issues by intentionally producing spanwise (larger nozzle dimension) variations in the shock-cell structures and studying the resulting spanwise screech mode. The spanwise-oblique shock-cell structures were produced using imperfectly expanded convergent-divergent rectangular nozzles (aspect ratio = 5) with non-uniform exit geometries. Three geometries were studied: (a) a nozzle with a spanwise uniform edge, (b) a nozzle with a spanwise oblique (single-bevelled) edge, and (c) a nozzle that had two spanwise oblique (double-bevelled) cuts to form an arrowhead-shaped nozzle. For all nozzles considered, the screech mode was antisymmetric in the transverse (smaller nozzle dimension) direction allowing focus on changes in the spanwise direction. Three types of spanwise modes were observed: symmetric (I), antisymmetric (II), and oblique (III), The following significant results emerged: (i) for all cases the screech mode corresponds with the spanwise shock-cell structure, (ii) when multiple screech modes are present, the technique presented here makes it possible to distinguish between coexisting and mutually exclusive modes, (iii) the strength of shocks 3 and 4 influences the screech source amplitude and determines whether screech is unsteady. The results presented here offer hope for a better understanding of screech and for tailoring shock-containing jets to minimize fatigue failure of aircraft components.
Show less

Title: Cavity Resonance Suppression Using Miniature Fluidic Oscillators
Creator: Raman, G., Raghu, S.
Date: 2004-12
Publisher: American Inst Aeronaut Astronaut

Title: Using Controlled Unsteady Fluid Mass Addition to Enhance Jet Mixing
Creator: Raman, G.
Date: 1997-04
Publisher: American Inst Aeronaut Astronaut
Description: A rectangular jet was excited by controlled unsteady fluid mass addition using two miniature fluidic jets placed on either side of its narrow...
Show moreA rectangular jet was excited by controlled unsteady fluid mass addition using two miniature fluidic jets placed on either side of its narrow dimension. The subharmonic of the primary's preferred jet column frequency [St(D-e) = fD(e)/U-J = 0.15] was forced in the antisymmetric mode because such forcing persists for longer downstream distances than the fundamental. Details of the phase-averaged flowfield, velocity gradient terms, velocity spectra, and the mean and fluctuating flowfields were documented. The fluidically excited mode grew and persisted in the flow beyond the potential core region. Unsteady fluid mass addition of 12% (4% momentum addition) per fluidic jet resulted in a 35% reduction of the potential core length and about a 60% increase in the normalized mass flux (percentages are with reference to the primary unforced jet). On the basis of the results, it appears that fluidic devices have the potential for use in shear flow control applications.
Show less

Title: Cessation of Screech in Underexpanded Jets
Creator: Raman, G.
Date: 1997-04-10
Publisher: Cambridge Univ Press
Description: In significantly underexpanded jets, screech inherently ceases to exist. This paper studies screech cessation in a supersonic rectangular jet...
Show moreIn significantly underexpanded jets, screech inherently ceases to exist. This paper studies screech cessation in a supersonic rectangular jet and provides an explanation for its occurrence. Experimental data are presented for fully expanded Mach numbers, M-j, ranging from 1.1 to 1.9. Screech becomes unsteady beyond M-j = 1.65 and ceases to exist beyond M-j = 1.75. The reason for this cessation has remained a mystery, and this paper examines three suspects: (i) the theory of a frequency mismatch between screech tones and the band of the most-amplified jet instability waves, (ii) the notion that Mach disk formation disrupts the shock-cell structure and weakens the screech-producing shocks, and (iii) the idea that acoustic feedback and receptivity diminish at high levels of underexpansion. A thorough interrogation of experimental data shows that (i) is not the main cause of screech cessation here, (ii) plays an insignificant role, and (iii) appears to have been largely responsible for screech cessation. Cessation occurs because feedback to the jet lip is diminished due to excessive expansion of the jet boundary. Further, since the jet lip now reflects and scatters low intensity sound, the end result is poor receptivity at the initial shear layer. This theory is substantiated by the re-activation of screech when the nozzle lip thickness is made larger than the expanded jet boundary. Finally, increasing lip thickness is seen to produce a systematic shift (to higher M-j) of the onset of cessation. The results of this study are of direct relevance to the sonic fatigue problem in aircraft structures, because understanding screech helps prevent such damage.
Show less

Title: Jet-cavity Interaction Tones
Creator: Raman, G., Bencic, Tj, Envia, E.
Date: 2002-08
Publisher: American Inst Aeronaut Astronaut
Description: A fundamental study of resonant tones produced by jet-cavity interaction over a wide range of flow conditions covering both subsonic and...
Show moreA fundamental study of resonant tones produced by jet-cavity interaction over a wide range of flow conditions covering both subsonic and supersonic speeds is described. Two significant findings emerge. For the jet-cavity configurations investigated, a suitably defined reduced frequency parameter allows for a global classification of all jet-cavity tones into two main types. For the first type, the reduced frequency depends on the jet Mach number, whereas for the second type, the reduced frequency is independent of the jet Mach number. We propose simple correlations for the frequency of both types of tones. Based on earlier research, we had expected that the traditional classifications of cavity flows into the open, transitional, or closed variety would be insensitive to small changes in Mach number and would depend primarily on the cavity's LID ratio. However, use of the novel high-resolution photoluminescent pressure sensitive paint shows that these classifications are actually quite sensitive to the jet Mach number for jet-cavity interactions. However, these classifications provide no guidance for determining tone type, amplitude, or frequency.
Show less

Title: Jet Thrust Vectoring Using a Miniature Fluidic Oscillator
Creator: Raman, G., Packiarajan, S., Papadopoulos, G.
Date: 2005-03
Publisher: Royal Aeronautical Soc
Description: This paper presents a new approach to vectoring jet thrust using a miniature fluidic actuator that provided spatially distributed mass...
Show moreThis paper presents a new approach to vectoring jet thrust using a miniature fluidic actuator that provided spatially distributed mass addition. The fluidic actuators used had no moving parts and produced oscillatory flow with a square wave form at frequencies up to 1(.)6kHz. A subsonic jet with an exit diameter of 3(.)81cm was controlled using single and dual fluidic actuators, each with an equivalent circular diameter of 1(.)06mm. The fluidic nozzle was operated at pressures between 20(.)68 and 165(.)47kPa. The objectives of the present work included documentation of the actuation characteristics of fluidic devices, assessment of the effectiveness of fluidic devices for jet thrust vectoring, and evaluation of mass flow requirements for vectoring under various conditions. Measurements were made in the flow field using a pitot probe for the vectored and unvectored cases. Some acoustic measurements were made using microphones in the near-field and for selected cases particle image velocimetry (PIV) measurements were made. Thrust vectoring was obtained in low speed jets by momentum effects with fluidic device mass flow rates of only 2 x 10(-4) kg/sec (0-6% of main jet mass flow per fluidic oscillator). Although a single fluidic device produced vectoring of the primary jet, the dual fluidic device configuration (with two fluidic devices on either side of the jet exit) produced mass flux enhancement of 28% with no vectoring. Our results indicate that fluidic actuators have the potential for use in thrust vectoring, flow mixing and industrial flow deflection applications.
Show less

Title: Shock-induced Flow Resonance in Supersonic Jets of Complex Geometry
Creator: Raman, G.
Date: 1999-03
Publisher: American Inst Physics
Description: Jets with complex shock-cell structures exist in numerous technological applications. This paper describes a fundamental study of shock...
Show moreJets with complex shock-cell structures exist in numerous technological applications. This paper describes a fundamental study of shock-induced flow resonance (commonly referred to as "jet screech") in supersonic jets with spanwise nonuniform shock-cell structures. Experiments that involve flow visualization and detailed mapping of the near field reveal unsteady aspects of shock-induced flow resonances, mode transitions, and directivity of the radiated noise. The following important results about the role of spanwise nonuniform shock-cells emerged: (1) It is possible to have two coexisting, independent feedback loops at nonharmonically related frequencies and different spanwise modes. (2) The same type of spanwise asymmetric mode was produced by two entirely different source configurations. (3) Nozzle geometry significantly altered the intensity and directivity of screech and broadband shock noise. The results presented here provide considerable insight into the fluid dynamics and acoustics of jets with spanwise oblique shock-cell structures and provide grounds for believing that shock-induced noise can be controlled by tailoring nozzle geometry. (C) 1999 American Institute of Physics. [S1070-6631(99)00103-8].
Show less

Title: Coupling of Twin Rectangular Supersonic Jets
Creator: Raman, G., Taghavi, R.
Date: 1998-01-10
Publisher: Cambridge Univ Press
Description: Twin jet plumes on aircraft can couple, producing dynamic pressures significant enough to cause structural fatigue. For closely spaced jets...
Show moreTwin jet plumes on aircraft can couple, producing dynamic pressures significant enough to cause structural fatigue. For closely spaced jets with a moderate aspect ratio (e.g. 5), previous work has established that two coupling modes (antisymmetric and symmetric) are kinematically permissible. However, the dynamics of twin-jet coupling have remained unexplored. In this paper a more fundamental assessment of the steady and unsteady aspects of twin-jet coupling is attempted. While we document and discuss the nozzle spacings and Mach numbers over which phase-locked coupling occurs, our concentration is much more on answering the following questions: (a) What mechanism causes the jets to couple in one mode or the other? (b) Why do the jets switch from one mode to another? (c) Are the two modes mutually exclusive or do they overlap at the transition point? Our results reveal, among many things, the following. (i) For very closely spaced twin jets in the side-by-side configuration phased feedback based on source to nozzle exit distance of adjacent jets does not fully explain the coupling modes. However, the 'null' phase regions surrounding the jets where the phase of an acoustic wavefront (arriving from downstream) does not vary appears to correlate well with the existence of the symmetric mode. When the 'null' regions of adjacent jets do not overlap antisymmetric coupling occurs and when they do overlap the jets couple symmetrically. We provide a simple correlation using a parameter (a) that can be used as a simple test to determine the mode of coupling. (ii) The switch from the antisymmetric to the symmetric mode of coupling appears to occur because of an abrupt shift in the effective screech source from the third to the fourth shock, which in turn causes the 'null' phase region surrounding the jets to grow abruptly and overlap. (iii) The two modes are mutually exclusive. Our results provide considerable insight into the twin-jet coupling problem and offer hope for designing twin-jet configurations that minimize damage to aircraft components.
Show less

Title: Supersonic Jet Screech: Half-century from Powell to the Present
Creator: Raman, G.
Date: 1995-08-19
Publisher: Academic Press Ltd
Description: Under certain conditions, shock-containing jets produce an intense tone referred to as screech. Screech was discovered about half a century...
Show moreUnder certain conditions, shock-containing jets produce an intense tone referred to as screech. Screech was discovered about half a century ago by Alan Powell in England. Here I recount developments in supersonic jet screech - from Powell's first observation in 1951 to now. During this period more than 200 papers have been published - many offering only incremental advances. This paper provides a concise screech resource including a historical perspective, a summary of recent developments and a critical assessment of the state of the art. Topics include modulation of instability waves by shocks, shock-cell models and screech frequency prediction models, unsteady shock motions and clues about their role in shock noise generation. also. detailed nearfield measurements and computer simulation methods now available are discussed. However, despite the advances, screech amplitude prediction remains an elusive but increasingly important goal not only due to concerns about sonic fatigue failure of aircraft structures but because knowledge gained by the study of screech can be applied to a variety of resonant flow situations, including jet impingement, cavity resonance, and closed-loop active flow control. (C) 1999 Academic Press.
Show less

Title: Advances in Understanding Supersonic Jet Screech: Review and Perspective
Creator: Raman, G.
Date: 1998-02
Publisher: Pergamon - Elsevier Science Ltd
Description: Screech tones are produced by imperfectly expanded jets under certain conditions. This paper provides an overview of developments in the field...
Show moreScreech tones are produced by imperfectly expanded jets under certain conditions. This paper provides an overview of developments in the field of supersonic jet screech. The overview includes a historical background, summary of recent developments, and a critical assessment of our current understanding of screech. The subject material has been categorized as described in the table of contents given below. (C) 1998 Elsevier Science Ltd.
Show less

Title: Coupling of Twin Supersonic Jets of Complex Geometry
Creator: Raman, G.
Date: 1999-10
Publisher: American Inst Aeronaut Astronaut
Description: Fundamental issues about the coupling of twin supersonic jets of complex geometry are examined. It is shown that screech tones from twin...
Show moreFundamental issues about the coupling of twin supersonic jets of complex geometry are examined. It is shown that screech tones from twin rectangular nozzles with double-beveled exit geometries can couple. Unlike coupling of twin rectangular jets of uniform geometry, the coupling here is more intricate because simultaneous multiple frequencies with a different spanwise modal structure are present. The coupling produces two frequencies, one of which is lower than the screech frequency of either jet. Although many coupling modes are kinematically permissible, the twin jets prefer two specific modes, and in some cases these two coupling modes coexist at different frequencies. Despite the geometric complexity we can effectively predict frequencies of tones from both single and twin coupled jets using the waveguide approach. It is hoped that these results and insights will assist those simulating screech for the purpose of tailoring shock-containing complex twin jets that minimize sonic fatigue failure of aircraft structures.
Show less

repository.iit

Search the repository

Enabled Filters

Refine Results

Type

Subject

Rights