Search results
(1 - 3 of 3)
- Title
- Using Controlled Unsteady Fluid Mass Addition to Enhance Jet Mixing
- Creator
- Raman, G.
- Date
- 1997-04
- Publisher
- American Inst Aeronaut Astronaut
- Description
-
A rectangular jet was excited by controlled unsteady fluid mass addition using two miniature fluidic jets placed on either side of its narrow...
Show moreA rectangular jet was excited by controlled unsteady fluid mass addition using two miniature fluidic jets placed on either side of its narrow dimension. The subharmonic of the primary's preferred jet column frequency [St(D-e) = fD(e)/U-J = 0.15] was forced in the antisymmetric mode because such forcing persists for longer downstream distances than the fundamental. Details of the phase-averaged flowfield, velocity gradient terms, velocity spectra, and the mean and fluctuating flowfields were documented. The fluidically excited mode grew and persisted in the flow beyond the potential core region. Unsteady fluid mass addition of 12% (4% momentum addition) per fluidic jet resulted in a 35% reduction of the potential core length and about a 60% increase in the normalized mass flux (percentages are with reference to the primary unforced jet). On the basis of the results, it appears that fluidic devices have the potential for use in shear flow control applications.
Show less
- Title
- Innovative Actuators for Active Flow and Noise Control
- Creator
- Cain, A. B., Raman, G.
- Date
- 2002
- Publisher
- Professional Engineering Publishing Ltd
- Description
-
Active flow control (AFC) has the potential to improve the efficiency of systems that involve both internal and external fluid flow. The...
Show moreActive flow control (AFC) has the potential to improve the efficiency of systems that involve both internal and external fluid flow. The primary driver in AFC is the expectation that the control will result in significant performance benefits at the system level with all trade-offs factored in. Successful application to aircraft systems can produce lighter, stealthier, agile aircraft with increased range, payload and a muffled acoustic signature. The design of an AFC system requires knowledge of flow phenomena and the selection of appropriate actuators, sensors and a control algorithm. The present overview focuses on actuators. Examples of flow and noise control presented here are restricted to open-loop systems. Various aspects of actuator utilization include actuator output characterization, exploiting resonances (plenum, structural or aeroacoustic) to enhance actuator amplitude and the different modes of actuation. A brief description of a high-bandwidth actuator is also provided, followed by a variety of application examples including edgetone suppression, cavity noise suppression, impingement noise suppression and jet mixing enhancement. The review concludes with a description of the successful application of AFC to the exhaust plume from an aircraft engine (JT8D).
Show less
- Title
- Jet Thrust Vectoring Using a Miniature Fluidic Oscillator
- Creator
- Raman, G., Packiarajan, S., Papadopoulos, G.
- Date
- 2005-03
- Publisher
- Royal Aeronautical Soc
- Description
-
This paper presents a new approach to vectoring jet thrust using a miniature fluidic actuator that provided spatially distributed mass...
Show moreThis paper presents a new approach to vectoring jet thrust using a miniature fluidic actuator that provided spatially distributed mass addition. The fluidic actuators used had no moving parts and produced oscillatory flow with a square wave form at frequencies up to 1(.)6kHz. A subsonic jet with an exit diameter of 3(.)81cm was controlled using single and dual fluidic actuators, each with an equivalent circular diameter of 1(.)06mm. The fluidic nozzle was operated at pressures between 20(.)68 and 165(.)47kPa. The objectives of the present work included documentation of the actuation characteristics of fluidic devices, assessment of the effectiveness of fluidic devices for jet thrust vectoring, and evaluation of mass flow requirements for vectoring under various conditions. Measurements were made in the flow field using a pitot probe for the vectored and unvectored cases. Some acoustic measurements were made using microphones in the near-field and for selected cases particle image velocimetry (PIV) measurements were made. Thrust vectoring was obtained in low speed jets by momentum effects with fluidic device mass flow rates of only 2 x 10(-4) kg/sec (0-6% of main jet mass flow per fluidic oscillator). Although a single fluidic device produced vectoring of the primary jet, the dual fluidic device configuration (with two fluidic devices on either side of the jet exit) produced mass flux enhancement of 28% with no vectoring. Our results indicate that fluidic actuators have the potential for use in thrust vectoring, flow mixing and industrial flow deflection applications.
Show less