Vertical-axis wind turbines (VAWTs) offer an inherently simpler design than horizontal-axis machines, while their lower blade speed mitigates... Show moreVertical-axis wind turbines (VAWTs) offer an inherently simpler design than horizontal-axis machines, while their lower blade speed mitigates safety and noise concerns, potentially allowing for installation closer to populated and ecologically sensitive areas. While VAWTs do offer significant operational advantages, develop- ment has been hampered by the difficulty of modeling the aerodynamics involved, further complicated by their rotating geometry. This thesis presents results from a simulation of a baseline VAWT computed using Star-CCM+, a commercial nite volume (FVM) code. VAWT aerodynamics are shown to be dominated at low tip- speed ratios by dynamic stall phenomena and at high tip-speed ratios by wake-blade interactions. Several optimization techniques have been developed for the adjustment of blade pitch based on finite-volume simulations and streamtube models. The effectiveness of the optimization procedure is evaluated and the basic architecture for a feedback control system is proposed. Implementation of variable blade pitch is shown to increase a baseline turbine's power output between 40%-100%, depending on the optimization technique, improving the turbine's competitiveness when compared with a commercially-available horizontal-axis turbine. Ph.D. in Aerospace and Mechanical Engineering, July 2016 Show less
Vertical-axis wind turbines (VAWTs) o er an inherently simpler design than horizontal-axis machines, while their lower blade speed mitigates... Show moreVertical-axis wind turbines (VAWTs) o er an inherently simpler design than horizontal-axis machines, while their lower blade speed mitigates safety and noise concerns. As a result, VAWTs can be used to open up more populated areas for large-scale wind energy development. While vertical-axis turbines do o er signi cant operational advantages, development has been hampered by the di culty of mod- eling the aerodynamics involved, along with their rotating geometry. This thesis presents results from a simulation of a baseline VAWT computed using Star-CCM+, a commercial nite volume (FVM) code. Overset grid techniques are used to model the VAWT's complex and moving geometry. VAWT aerodynamics are shown to be dominated at low tip-speed ratios by dynamic stall phenomena and at high tip-speed ratios by wake-blade interactions, using ow visualization and blade angle of attack. An iterative procedure to optimize the VAWT's geometry is developed using blade pitch to mitigate the adverse e ects of dynamic stall for a tip-speed ratio of 2.0 case. Relying on both a constant blade pitch o set as well as a variable blade pitch as a function of azimuthal angle, power output was shown to be increased by 17% and 38%, respectively, compared to the baseline case. Emphasis is placed on the modeling techniques used in the FVM simulation and the optimization process. M.S. in Mechanical and Aerospace Engineering, May 2014 Show less
