creator Vasudevan, Vignesh advisor Saniie, Jafar Navigation to a specific destination indoors can be a challenge due to different reasons such as visual impairment, unknown environments, etc. There has been much work done to solve this issue such as indoor positioning systems, navigation using sensors and even using a robotic guide. In this thesis, a novel and straightforward method of path planning (including object avoidance) is presented as a way of navigating to a desired location within a complex environment. The system proposed uses the combination of depth information from an RGB-D camera and the object information from a Neural Network based object identification technique, to efficiently calculate and plan a path in real-time, to a pre-specified destination. Persons to be helped are identified using object detection, and the most practical path to the desired destination is calculated. The path information would be sent to the handheld device of the person being helped in the suitable form of interface, such as visual, audio, etc. The surveillance type nature of the system enables it to help multiple persons in the same area. The model was tested in a controlled environment with one individual person being guided to nearby specified locations. The testing showed promising results, validating the performance of the system. Submitted by Erma Thomas (thomase@iit.edu) on 2019-05-14T20:03:56Z No. of bitstreams: 1 etdadmin_upload_577801.zip: 168032177 bytes, checksum: de341da377c637edd7428e8fb422dc2c (MD5) Made available in DSpace on 2019-05-14T20:03:56Z (GMT). No. of bitstreams: 1 etdadmin_upload_577801.zip: 168032177 bytes, checksum: de341da377c637edd7428e8fb422dc2c (MD5) Previous issue date: 2018-05 M.S. in Electrical Engineering, May 2018 2018 2018-05 http://hdl.handle.net/10560/4415 en Grain Boundary Engineering Nickel Based Superalloys Recrystallization Twin Boundaries Thesis born digital application/pdf In Copyright http://rightsstatements.org/page/InC/1.0/ Restricted Access