creator Siddiqua, Ayesha 2022 Spring 2022 Thesis Illinois Institute of Technology CHEM / Chemistry advisor Wang, Rong Chemistry Biochemistry Physical chemistry Electrospinning Heat Evolution Hemorrhage Indocyanine Green Near Infrared Silk Fibroin en Silk fibroin (SF), a structural protein found in the Bombyx mori cocoons has gained attention in several biomedical applications as tissue engineering scaffolds and wound dressings owing to its properties such as biocompatibility, water vapor permeability and biodegradability. Indocyanine Green (ICG) is an FDA approved tricarbocyanine dye used in medical diagnostics due to its unique photothermal and fluorescent properties. Electrospinning is a highly efficient, easy, and inexpensive technique used to generate nanometer to micrometer thick fibers. In this study, SF and ICG were co-spun to generate flexible microfibers with high surface area to volume ratios. Pure silk, SF-ICG (0.1%) and SF-ICG (0.4%) were chosen for the purpose of this study. Since, as-spun fibers are unstable in aqueous solutions, post treatment methods were explored to enhance the durability of the fibers and to minimize ICG leaching. It was found that ethanol vapor treatment (EVT) not only induced β-sheet formation in SF but also improved the SF-ICG interaction thereby reducing ICG leaching from the composite fibers. Ethanol vapor treated SF-ICG fibers showed less ICG leaching than liquid ethanol treated (LET) SF-ICG fibers indicating the efficacy of the EVT. The increase in SF solution viscosity with ICG concentration suggested a strong silk-ICG interaction which was further confirmed by DSC. The 1h water uptake and the three-day mass loss experiments indicated that the fibers are stable and highly absorbent material. Heat evolution was evaluated by measuring the temperature change in water of a fixed volume after irradiation with a 500 mW, 808 nm diode laser. The heat evolved by the flat fiber scaffolds was higher than the 3D fiber balls, indicating improved light penetration in the former. Pure silk produced negligible heat and it was used as a control. With 14.9 W/cm2 irradiation, the post-treated SF-ICG (0.4%) 3D fibrous ball of 2-3 mg dry weight, solidified a drop of bovine blood in 40 s. In contrast, a single layer fiber matrix required 3 min. to achieve the same clotting effect. Fibers folded into flat scaffolds were able to solidify a blood drop in 25 s. Pure silk fibers in all the cases showed negligible change after irradiation. The results suggest that a larger contact area of fibers is desirable for faster blood clotting, and EVT prompted better ICG retention in SF fibers. Based on the above results, SF-ICG (0.4%) fibers were utilized in a device developed to mimic blood flowing at a rate of 0.5 mL/h through a damaged blood vessel. It was found that irradiation of SF-ICG locally placed at the “damage” region effectively stopped “bleeding” whereas irradiated pure silk was unable to control the blood flow, which demonstrated the success of our SF-ICG fibers towards hemorrhage control. born digital application/pdf In Copyright http://rightsstatements.org/page/InC/1.0/ Restricted Access http://hdl.handle.net/10560/islandora:1024946