Effect of heat treatment on microstructure and electrochemical behavior of laser powder bed fusion hydride- dehydride ti-6al-4v alloy Delpazir, Melody Honardan Materials Science additive manufacturing Annealing treatment corrosion Hydride-dehydride powder laser powder bed fusion Saline water In powder bed additive manufacturing, feedstock and processing have an impact onfinal microstructure and properties of 3D-printed parts. While numerous studies have evaluated 3D-printing of spherical powder, very limited research has been carried out on the processing of the non-spherical feedstock. This study is targeted specifically to the use of non-spherical Ti-6Al-4V powders in the laser powder bed fusion (L-PBF) process. Two different post-heat-treatments including hot isostatic pressing and solution treatment are applied. The microstructure evaluation, potentiodynamic polarization, and electrochemical impedance spectroscopy methods are used to characterize L-PBF processed and post- treated specimens. Though as-built part exhibits anisotropic microstructure containing acicular α′ martensite with trace amount of β phase, the heat-treated parts are composed of α+β in which length and thickness of the α-lath depends on the treatment. The below β transus heat treatment leads to the formation of a homogenized grain structures composed of α+β. Electrochemical results show that the below β transus heat-treatment had a slight positive effect on the improvement of corrosion resistivity (corrosion rate of 4.2×10-6 mmy- 1 , which is classified as an excellent ) compared to other conditions, which would be associated to the natural excellent corrosion resistance of Ti-6Al-4V alloy. This slight improvement can be ascribed by the slightly faster formation of a passive layer and its enhanced efficiency because of the presence of the fine-structured β phase in post heat- treated L-PBF processed Ti-6Al-4V alloy. Mostafaei, Amir 2022 Thesis application/pdf islandora:1024836 http://hdl.handle.net/10560/islandora:1024836 Illinois Institute of Technology MMAE / Mechanical, Materials, and Aerospace Engineering en In Copyright http://rightsstatements.org/page/InC/1.0/ Restricted Access