creator Zhou, Ning 2019 Summer 2019 Dissertation Illinois Institute of Technology ECE / Electrical and Computer Engineering advisor Wong, Thomas Electrical engineering Accelerator Beam Impedance matching Photonic Band Gap Star-shape array Suppression en In this thesis, the design and experimental work of a Photonic Band Gap (PBG) accelerator cavity with star-shape array is presented. Photonic band gap structures (metallic and/ or dielectric) have been proposed for accelerator applications. These structures act like filters, allowing electromagnetic waves propagating at some frequencies to be transmitted through the lattice, while rejecting the RF fields in some (unwanted) frequency range. Additionally PBG structures are used to support selective field patterns (modes) in a resonator or waveguide by a defect region within the lattice; while damping unwanted higher- or lower-order modes without impacting the supported mode. The unwanted modes affect beam propagation or even distort the beam. Thus, suppression of unwanted modes is important. In this thesis work, a star shape structure is obtained from removing elements in a PBG structure with triangular lattice and employed for integration with a metallic cavity resonator for accelerator applications. Impedance matching is accomplished by adjustment of positions of some elements in the array. The design was fabricated and measured to have an input return loss of over 30 dB at the targeted frequency of 11.4GHz. The measured results are in an excellent agreement with the computer simulation. born digital application/pdf In Copyright http://rightsstatements.org/page/InC/1.0/ Restricted Access http://hdl.handle.net/10560/islandora:1000793